Isolate the process Workflow Mailer

Similar Questions

• The replacement of the PK in the process to insert the form after this

  Hello

  I'm quite new in the world of the APEX and I'm having a problem I want to please appreciate any input on... I use APEX 5.0.

  I have a form page to insert (P2) to a new section in my table of queries (with PK of 'ID' column). The billing ID (P2_ID) page is hidden (not sure if that makes a difference)... I then have a process after submit type "Send E-mail" and I want to include information about the new entry in the email.

  Each substitution that I do, as & P2_Description, & P2_Requester. etc works fine, but the replacement of the ID (PK - & P2_ID) does any work. I presume it is because at that time, the recording has not intervened in the table, and the sequence/trigger has not generated the following value?

  How can I please pass this value to the process/electronic mail? I tried to use P3_ID (P3 being the form of update page) and it works, but it always sends the previous entry.

  I'm sure that it must be simple, but as I said I'm pretty new to APEX and could not understand how! Is it possible to have this identification number to pre-fill the next value in the table field, before the present? And what happens if someone else creates a new entry at the same time?

  Thanks in advance

  George

  Hi George,.

  User807933-Oracle wrote:

  Thanks a lot for your reply Jitendra,.

  Do I have to use a different page for "Return Key in Item" element other than P2_ID?

  Under the settings for the DML processes, I have:

  Primary key column: ID

  Main key: P2_ID

  and added P2_ID to return key in the element. Support operations is just "Insert..."

  However, it is always empty when it arrives on the enamel. My process to send the e-mail message must be in a different area? I'm currently after shows. Maybe add to the treatment area, after the DML process?

  Thanks again!

  How are you referring to the item values in the process of your e-mail?

  your mail sending process should be after the insertion process.

  Kind regards

  Jitendra

• Application did not get approved the notification E-mail

  Dear all,
  
  Please note that in the envelope for notification of workflow,
  
  If a request is created and managed with the workflow for approval of the application, a notification e-mail to the mailbox of the immediate supervisor.
  
  But when the contractor approved by mail itself, its not getting approved
  
  (But his approval of the summary of the Notification - application level)
  
  Why he don't had not approved when the approval made by the post itself...
  
  How can I fix this... Please update... My request is 11.5.10.2 and the SUN SOLARIS operating system
  
  Note: even though I have the same thing to a username before obtaining not transmitted...
  
  Thanks in advance...

  Salvation;

  Please check:
  Unable to connect to the mail store in the Workflow Notification Mailer newspapers [ID 741352.1]
  E-mail Notifications sitting The Inbox, Workflow Mailer not picking up their for treatment [390811.1 ID]

  It may be useful

  Respect of
  HELIOS

• Not to receive Notifications by e-mail through process Workflow Hyperion

  Hi all
  
  SMTP configuration for workflow processes in Hyperion planning.
  
  I did the following steps for the process described above.
  
  1 > I checked if the SMTP server is running or not using Telnet command in the machine where the application is running-> * [its working fine] *.
  
  2. > then I have connected to the planning of an application with the credentials for the admin and the details of the Email Server so
  
  2.a) * [planning-> Administration-> Application-> settings-> I entered the details of the Email Server] *.
  
  2.b) * [planning-> file-> Preferences-> planning-> I mentioned the administrator email address] *.
  
  3 > I created several users using the shared services console and I set the security type of access as Descendants included for each dimension.
  
  4 > I put the e-mail address for all users that are created in the step above * [-> file-> Preferences-> planning planning] *.
  
  5 > I created a planning hierarchy unit.
  
  6-> I logged as a Planner and I entered in the budget in the form of data.
  
  7. > I have promoted this budget officer for the audit process.
  
  8 > but have not the mail of status for the process described above.
  
  
  Kindly guide me if I am following the proper config SMTP procedure in my application.
  
  How to get the status of e-mail notification through relational tables.
  
  Please mention the location of the log files.
  
  Please guide me to solve this problem.
  
  
  Thanks and greetings
  SAI

  You've gone through the document in support of the Oracle - ' Notifications by mail electronic Troubleshooting In Hyperion Planning [ID 988576.1].

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• My email is unable compact my mails, it starts the process and then stops.

  My email is unable compact my mails, it starts the process and stops, any help

  Try to manually compact with my Windows Mail utility (www.oehelp.com/WMUtil/) and see if it works.  Also check interference antivirus (see www.oehelp.com/OETips.aspx#3).

  Steve

• I created an adobe account and I am currently trying to install creative cloud to be able to try the trial version of photoshop and lightroom, however I can get insofar as the process of checking e-mail and adobe is sending the e-mail to my nephews one em

  I created an adobe account and I am currently trying to install creative cloud in order to try the trial version of photoshop and lightroom, but I can't get insofar as the process of checking e-mail and adobe is sending the e-mail to my email from hotmail to nephews who is not associated with this account.  He used my iMac in November but I only created this adobe account this week.  His e-mail address is not linked to this account anyway... help.  I really need to try out photoshop and lightroom and do not want to buy the monthly where the same problems occurs.  Thanks in advance.

  > He used my iMac in November

  What you need to do is to get him to sign with the cloud on your computer, uninstall and clean all Adobe, then login with your account

  Disconnect the TWO accounts... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to YOUR account... Reinstall

• How to add the field or a query to THE field of the process send e-mail Page

  Hello world

  Can you help me please?

  How can I add a field or a query in "to THE" field of the process to send a Page in e-mail?

  I use the 4.1.0.00.32 and oracle 10g Express Application.

  Hi User11131067, please update your grip via profile to something more personal.

  Here's how I did it:

  DECLARE

  l_body CLOB.

  l_to VARCHAR2 (255);

  BEGIN

  l_body: =.

  "Thank you for your interest in the APEX_MAIL package."

  || UTL_TCP. CRLF

  || UTL_TCP. CRLF;

  l_body: = l_body | "Sincerely,". UTL_TCP. CRLF;

  l_body: = l_body | "Dev APEX team | UTL_TCP. CRLF;

  -Get the email addresses of administrators from point of harvest

  WITH the admins

  AS (SELECT person_tbl.email_address_txt,

  ROW_NUMBER () OVER (ORDER BY email_address_txt) rn,

  COUNT (*) NTC)

  OF harvest_admin_tbl, person_tbl

  WHERE harvest_admin_tbl.active_ind = 'Y' - use active Admins only

  -Eliminate Admin Act

  AND harvest_admin_tbl.internal_employee_id <> v_payroll_id

  AND harvest_admin_tbl.internal_employee_id =

  person_tbl.employee_ghrs_id)

  -Concatenate addresses into a single string

  SELECT LTRIM (SYS_CONNECT_BY_PATH (email_address_txt, ",") ",") catvalues

  IN l_to

  Admins

  WHERE rn = NTC

  START WITH rn = 1

  CONNECT BY PRIOR rn = rn - 1;

  apex_mail. Send (p_to => ' [email protected]', - change to your email address)

  P_FROM-online l_to

  p_body-online l_body,

  p_subj => 'APEX_MAIL Package - message in plain text');

  END;

  /

• E-mail the process by clicking on the Save"" button.

  I would like to know how to do this:
  
  
  You have a card (purchase) Yes () no
  
  ~~~~~~~~~~~~~~~~~~~~~~~~~~
  
  If the user selects 'Yes', I want to send an email in the process, when the user clicks on "Save".
  
  But I also have a question P2_EmailSent, I want to point out as being sent, and the date it was sent, P2_DateEmailSent.
  
  Then, after a week (check P2_DateEmailSent) date that it was sent, send it back.
  
  Please let me know if you need more information?

  Hi Zahid Khan,

  as said, I tried the same thing.
  I created a button 'Send' action: submit.
  and have also created a process 'send an email' with the folloing code

  DECLARE
  l_body CLOB.
  BEGIN
  l_body: = "Thank you for your interest in the APEX_MAIL package." | UTL_TCP. CRLF. UTL_TCP. CRLF;
  l_body: = l_body | ' Sincerely,' | UTL_TCP. CRLF;
  l_body: = l_body | "Dev APEX team ' | UTL_TCP. CRLF;
  () apex_mail. Send
  p_to-online "[email protected]."
  P_FROM-online "[email protected]."
  p_body-online l_body,
  p_subj => 'APEX_MAIL Package - message in plain text');
  APEX_MAIL.push_queue;

  END;

  and the process as 'fact' success Message and when the button pressed (process after submit when this button is pressed): 'SEND' to the point of process: 'ON SUBMIT AFTER CALCULATIONS AND VALIDATION '.

  «"" "" "Process is running..., get the '' ' success message' ' ' but unable of ' ' ' mail»»» (tried different combinations of mail ID)

  any help!

• Trigger an email notice when the workflow mailer service is down

  Dear all,
  
  We can trigger an email automatically from the operating system, if the Workflow services mailer goes down?
  
  or which is the best method to notify when services are down. Please update...
  
  Thanks in advance...
  
  Kind regards

  We can trigger an email automatically from the operating system, if the Workflow services mailer goes down?

  Yes, by checking the OS workflow services - see (Note: 1054215.1 - how to check if the sender of Workflow runs) for more details.

  or which is the best method to notify when services are down. Please update...

  You can also use Oracle alert (use of the query in the same doc) - you can find the manual Oracle alert at http://www.oracle.com/technetwork/documentation/applications-167706.html

  Thank you
  Hussein

• How to set up in the process of report server 11g Linux for destype = mail

  Currently, get the error when send the report as an e-mail attachment destype = mail. Is there something missed during the configuration of Mail Server?
  
  REP-50159: distribution to destinations the report generated successfully but failed.
  REP-50152: Destination ID ProfitLoss failed with the error an error occurred sending mail: null...
  
  Compose the report via Oracle form with destype = mail, desformat = PDF and [email protected]
  
  Log file: rwserver_diagnostic.log
  
  [2012 05-13 T 17: 04:39.273 + 03:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50152] [oracle.reports.server] [tid: 16] [username: < anonymous >] [ecid: 0000JT6ULwsATOG6yz6iMG1Ffvn4000000, 1:18567] [APP: reports #11.1.2] REP-50152: an error occurred sending mail: null. [[
  oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
  at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
  at oracle.reports.server.MailService.send(MailService.java:588)
  at oracle.reports.server.DesMail.sendFile(DesMail.java:186)
  at oracle.reports.server.Destination.send(Destination.java:578)
  at oracle.reports.server.JobObject.distribute(JobObject.java:2041)
  at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2763)
  at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:154)
  at oracle.reports.server.EngineCommPOA._invoke(EngineCommPOA.java:94)
  at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
  at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
  at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
  at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
  at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
  to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.performWork (ThreadPoolImpl.java:471)
  to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.run (ThreadPoolImpl.java:500
  ]]
  
  In order to print the report via Oracle form with destype = CACHE, desformat = PDF.
  
  Mail server parameters are defined.
  
  EM > reports Application Basic Configuration > settings of the e-mail server
  
  Server port Mail Server Mail Server mail user name, password for the mail server key.
  
  Environment:
  
  Server-side:
  Oracle Linux 5
  Oracle Weblogic Server 10.3.6
  Oracle Forms FMW and report 11.1.2
  Configure: Current report server
  
  Client side:
  Window 7

  Now, reported problem is resolved, able to send report when destype = mail

  Go to EM > Report Server > Admin > Advanced Configuration:
  Add this topic "Reports Pluggable Destinations"

  New name of the Destination: mail
  Class: oracle.reports.server.DesMail

• How a BPEL workflow can return in the middle of the process?

  I had a BPEL process, and after invoking a web service, a response back to the client immediately, and the flow continues. However, I found that he did not return to reality, he returned after the process is complete. And if I added a component to wait 3 seconds. She would not immediately respond, but during performance tests, it seems the process would not continue after 3 seconds and cause other problems. Y at - it of to way the answer immediately returned without the component of waiting? Thank you very much.

  This behavior is specified... Even if you do an action to respond, the real answer will be returned only when he meets a dehydration activity. Different options available to you are:

  1. in the PS3, there is a new Checkpoint activity, which you must do immediately after the answer.
  2. in previous versions of 11 g, you can use a business exec of java with a call to breakpoint() immediately after the answer
  3. you define a component property called idempotentReply to true. Then you don't need no activity of dehydration explicitly in the bpel code. Drawback with this approach is that this setting will affect all operations on all the links of sponsors on the component.

• Service Manager Console 2012 can create tickets via email through any kind of process/workflow?

  Original title: create tickets by e-mail

  Hey guys,.

  I need to create a support metric and most of our users are used for sending emails to the support mailbox and do not connect a ticket. Service Manager Console 2012 can create tickets via email through any kind of process/workflow? I know another system that can - I did not know if the MSC can?
  I hope that makes sense.  THX,

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to start service apps without starting R12 workflow mailer?

  Hi all
  
  As a topic, how can I start service apps without starting R12 workflow mailer?
  
  For example, I'm not mailer workflow (another early normal workflow service) started the course, I use adstrtal.sh to start the service.
  
  My environment is: Oracle R12.1.2 | AIX 6.1
  
  
  Concerning
  Terry

  Terry,

  The responsibility of the system administrator, go to the competitor > Manager > define and query "Service of Workflow Mailer", click on blood and change the number of process to 0. Or upgrade from the backend - http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_CONCURRENT_QUEUES&c_owner=APPLSYS&c_type=TABLE

  Thank you
  Hussein

• Workflow Mailer error

  Applications: 11.5.10.2
  Linux
  DB: 10.2.0.4
  
  oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters-> {OUTBOUND_SERVER = cannot establish a network connection.}. Settings were--> {INBOUND_MAX_IGNORE_SIZE = 1000, INBOUND_MAX_LO OKUP_CACHE_SIZE = 100, ATTACH_IMAGES = O, INBOUND_UNSOLICITED_THRESHOLD = 2, ALLOW_FOR WARDED_RESPONSE = Y, NODENAME = WFMAIL, SEND_UNSOLICITED_WARNING = O, AUTOCLOSE_FYI = O, PROCESSOR_READ_TIMEOUT_CLOSE = N, INBOUND_PROTOCOL = IMAP, ATTACHED_URLS = WFMAIL:ATT ACHED_URLS, TEST_ADDRESS = NONE, PROCESSOR_OUT_THREAD_COUNT = 1, EXPUNGE_ON_CLOSE = Y} ATTACH_STYLESHEET = O, OUTBOUND_CONNECTION_TIMEOUT = 120, INBOUND_MAX_RET_EMAIL_SIZ E = 100, MAX_INVALID_ADDR_LIST_SIZE = 100, PROCESSOR_MAX_LOOP_SLEEP = 60 SEND_ACCESS_ = N, PROCESSOR_IN_THREAD_COUNT = 1, FRAMEWORK_APP = 1 KEY, CLOSED = WFMAIL: CLOSED, ND_FETCH_SIZE = 100 INBOU, SUMMARY = WFMAIL:SUMMARY, ENABLE_STYLESHEET = N, PROCESSOR_ERROR_ = 60 LOOP_SLEEP, OPEN_MAIL_FYI = WFMAIL:OPEN_MAIL_FYI FRAMEWORK_RESP = 20420, ALTERNA TE_EMAIL_PARSER = oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD = _.                                             8846689408! $! #! 4@6@00$08!90^0@6$46^4$'@A^!}! %$9|*9@*A & HTTP_USER_AGENT = Mozilla 4.76, RESET_NLS = N, PROCESS = SENT ITEMS, OPEN_MAIL_DIRECT = WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP = 5, MESSAGE_FORMATTER = onFormatter, [email protected], FRAMEWORK_USER = 0 oracle.apps.fnd.wf.mailer.Notificati, CANCELED = WFMAIL:CANCELED, OUTBOUND_PROTOCOL = SMTP, ELEMENTS SUPPRIMES, ACCOUNT = oracle.w orkflow.regt = DISCARD, FROM = REGT - Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ = O, SEND_ CANCELED_EMAIL = N, WFMAIL = WARNING : Warning, PROCESSOR_MAX_ERROR_COUNT = 10, INBOUND_ = 120 CONNECTION_TIMEOUT, HTMLAGENT = xxxxxxxxxxxxxxxxxxx T, INBOX = INBOX, OPEN_INVALID_MORE_INFO = WFMAIL:OPEN_INVALID_MORE_INFO, OUTBOUND_S SL_ENABLED = N, INBOUND_SERVER = EMAIL11.xxxxx, OPEN_MORE_INFO = WFMAIL:OPEN_M ORE_INFO, MAILER_SSL_TRUSTSTORE = NONE, INLINE_ATTACHMENT = N, OPEN_INVALID = WFMAIL:O PEN_INVALID, EMAIL_PARSER is oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT ANSWER = N, OPENMAIL = WFMAIL:OPEN_MAIL_OUTLOOK, MORE_INFO_ANSWERED = WFMAIL:MORE_ INFO_ANSWERED, HTML_DELIMITER DEFAULT =, FRAMEWORK_URL_TIMEOUT = 120, LEVEL COMPONENT_LOG_ = 5, SUMHTML = WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT = 10, DEBUG_MAIL_SESSION = N, OUTBOUND_SERVER = appltech, INBOUND_SSL_ENABLED = N}
  at oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent (ComponentContainer.java:2214 Svc)
  at oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent (SvcCompo nentContainer.java:300)
  at oracle.apps.fnd.wf.bes.DispatchThread.run(DispatchThread.java:57)

  OUTBOUND_SERVER = cannot establish a network connection.}.

  have you checked the workflow settings are correct... ?, user workflow not able to connect Server outbouned...

  Please check metalink notes below:

  11i/R12 - a guide for troubleshoting emails of Notification Workflow - inbound and outbound Doc ID:831982.1
  Troubleshooting incoming e-mail Notifications [ID 1184846.1]
  Troubleshooting Workflow Oracle Applications 11i [ID 262011.1]
  UAS: Diagnostics, Solutions and information [ID 332152.1]
  Notice of outgoing Email Workflow is not received [370327.1 ID]

  to start and stop the workflow:

  Note: 548918.1 - how to start delayed Workflow Agent andWorkflow deferred Java Agent listener listener?
  Note: 452354.1 - how to start or stop the workflow Mailer or Defered Agent listener from the command line, not OAM

• Why Thunderbird is puts some junk in the junk e-mail folder, but leaves others marked as spam in the Inbox (IE why incompatible)?

  I read the instructions under Mozilla based on Firebird training and set up a junk folder - DONE!
  But, while some junk goes in the folder junk e-mail, others remain in my Inbox marked as junk. Why? Is it in line, and some action is expected of me - or a flaw in the process?

  I don't have a real answer for you. But BT using Yahoo mail and my recent comments is Yahoo IMAP is in a world of its own when it comes to spam and marking mail as such. It moves e-mail and from the unwanted spam/e-mail folder with its own rules and that Thunderbird be damned. Oh one there is no way to turn their junk filtering.