Issue of API or another restricted signature access

Similar Questions

• Add the restriction of access to the file – cannot open / view the files more

  I added a restriction of access to a particularly important issue. But so all the files inside are now either opening. I get a prompt this unknown format - or bad file descriptor, or can not read file header etc. What should I do? Help, please

  Hi Abhay,

  1. What is the complete message you receive?

  2. where is this file?

  3 is confined to a particular file? What kind of file is it?

  4. your computer is on a domain?

  5. have you limited access for reading and writing?

  This problem can occur if the restriction of folder is not set correctly.

  We can refer to the articles and check if it helps.

  "Access denied" or other errors in the access to or work with files and folders in Windows

  How to open a file if I get an access denied message?

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• How can I create an another user to access the HR schema data

  I am new to Oracle and just downloaded the: 10 x e. I have connected as human resources and was able to modify data in tables.
  I created another user, then say ABC, when connected as SYS. But then I could not access the tables and the data even in human resources.
  
  I learned that every user has its own schema, but how do I create an another user to access the same tables, and the data I see in the Oracle DB?

  Log in as a user of the system (or sys as sysdba) and:
  create user identified by ;
  Grant connect, create session ;

  To see objects to a different schema from the database user must then obtain the privilege:

  Grant select on hr. à ;

• License restrictions impede access to this address.

  After the CF7 updated to the new DST requirements, we are seeing INTERMITTENT problems with some being not loaded SWF movies.
  
  Flash forms work fine.
  Any indication to examine how would be fabulous.
  
  ColdFusion - err.log shows:
  03/13 15:47:48 Proxy Servlet ERROR: license restrictions prevent xx.xx.xx.xxx access
  03/13 15:47:48 ERROR Proxy Servlet: authorized addresses: [{71.218.19.250} {192.168.1.145} {74.93.23.77} {24.131.24.127} {192.168.1.1}]
  03/13 15:47:48 error Licensing restrictions prevent access to this address.
  java.io.IOException: license restrictions impede access to this address.
  at flex.services.license.AddressRestrictionFilter.invoke(AddressRestrictionFilter.java:28)
  at flex.server.j2ee.cache.CacheFilter.doFilter(CacheFilter.java:165)
  at flex.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:66)
  at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
  at jrun.servlet.FilterChain.service(FilterChain.java:101)
  at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
  at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
  at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
  at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
  at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
  to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:318)
  to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:426)
  to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:264)
  at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

  It is not a J2EE installation. It is installed standalone on IIS6.
  Anyway, Jrun is ultimately rejected deploy cfusion on the launch of the service.
  I completely reinstalled the full install of CFMX.

  Thanks anyway.

• Module is trying to access a secure API - the reinstallation of Signature keys...

  Hello

  ATER, a problem that I have to reinstall my eclipse + jde plugin, as a result of this relocation, I also need to ask new .csi file in order to resinstall also Signature keys.

  After receiving 3 new csi files, signature keys has been successfully installed.

  Now, I have no problem when I run a ' build and sign Blackberry Widget Project ", that I get every time that a" SUCCESS BUILDING "result.»

  The problem is when I execute the widget on a real device, after the launch of the application whenever I get a "Module to access a secure API attempts" then the request has failed.

  Feature: Storm 2 9529 worm 5.0.0.306 (platform)

  For your information before my new installtion of the eclipse + JDE widget built with previous keys and the previous eclipse running on the same device that above.

  I did not change my source code, I try just to check if the application still running with the new keys and the new Eclipse + JDE.

  Does anyone have an idea what's wrong?

  Looks like you need another set of files of csi.

  Before installing your new keys delete all files sigtool.csk, sigtool.db and sigtool.set on your PC.  This will clear your previous code signing keys.

  So be sure to install each of the 3 csi files in the mansion even to make sure that all are installed in the same development tool.

• With regard to the update system - restriction of access to records admin app

  Regarding the system update in this thread to update system - restricting access to folders app admin , I can not answer in this thread because I'm not a mod and there is no reply button.

  My question concerns the public record, what we do with it?

  S ' there is a placed file in it can it use liquid?

  - I assumed that the front-end server can access this directory, but (from the front end) we won't be able to use the new API v3?

  - Other applications access to the updated files? That is to say. He says in public, it is that? It is not safe at all in other words?

  -Is the case more as a temporary workspace or the (public) long-term storage? Can other apps delete files there? That is to say. I might need to make sure that a file exists before you assume it's there.

  Hello

  1. The files in the folder admin app can run modules and liquid (if you do not use another library of client-side library which is in conflict with the liquid syntax)
  2. Yes, front-end can access files on this folder (you cannot list the contents of the folder of front end) and you can access the REST API using module_data; direct access to the API is not possible, because you will need to be authenticated
  3. Yes, other applications can access the files put there, same as possible that nobody knows the URL of the page
  4. It is a public storage for long-term applications. Apps cannot delete files in other folders for apps, but they can read;

  Cristinel

• Issue of API browser opening and the basis of the location.

  Finally got my file COD signed and is now able to open the browser which is great.

  Now, when the browser opens, it goes to the Blackberry website.  However, when I close the browser to go back to my home screen, I notice that it keeps open the browser.  I had to press the home button.  Here is the snippet of code to the browser.  I developed this in JDE 4.7.0, and I test it on my "BOLD".

  try {}
  Download the default sessionBrowserSession
  Private private = Browser.getDefaultSession ();
  Now launch the URL
  browserSession.displayPage ("http://www.frugalytics.com/");
  The next line is a work around for the issue in
  version 4.2.0
  browserSession.showBrowser ();
  }
  catch (Exception e) {}
  Alert B = new alert ("call browser Error", e.getMessage (), null, AlertType.ERROR);
  b.setTimeout (10000);
  display.setCurrent (b);
  }

  I open the browser according to the thread "run()" method  Not sure if this may have something to do with it.  I also have another MIDlet, as I am just learning, he uses the JavaME location database API.  I used this same excerpt on other devices and it is able to get the latitude and longitude.  But to test this on my "BOLD", I don't get the initial lat and long.  The extract is below and it is also called in a thread "run()" method.  Not sure if there is something different I have to do.  Any help is greatly appreciated.  Thank you.

  try {}
  criteria = new Criteria();
  criteria.setPreferredResponseTime (20);
  criteria.setVerticalAccuracy (500);
  criteria.setHorizontalAccuracy (500);
  LP = LocationProvider.getInstance (criteria);
  Loc = lp.getLocation (20); 10 seconds
  CdR = loc.getQualifiedCoordinates ();
  If (cor! = null)
  {
  Use the information to contact information
  This.LAT = cor.getLatitude ();
  This.longi = cor.getLongitude ();
  Alert B = new alert ("Getting location:", this.lat + ":" + this.longi, null, AlertType.INFO);
  b.setTimeout (10000);
  display.setCurrent (b);
  }
  else {}
  If (lp.getState () is lp. TEMPORARILY_UNAVAILABLE) {}
  Unable to reach the current place of residence
  Alert B = New Alert ("Error location", "temporary location Unavailable", null, AlertType.INFO);
  b.setTimeout (10000);
  display.setCurrent (b);
  }
  } //else
             
  } //try
  catch (Exception e) {}
  Alert B = new alert ("location Exception Error", e.getMessage (), null, AlertType.ERROR);
  b.setTimeout (10000);
  display.setCurrent (b);
  } //catch

  "when I close the browser to go back to my home screen, I notice that it keeps open the browser" what it means when you press the button close the browser and it goes back to your home screen and it is dispalying the browser all again?

  For the location in function... Have you tried with default criteria.

• How to allow another computer to access my wireless connection

  I'm connectedo to router Wireless 'InfostradaWifi '. Please help to allow me to set up this computer to allow access wifi by any computer nearby. A nearby computer gives the message: "cannot connect to the hidden network"InfostradaWifi". Thanks in advance for your help.

  Isaac

  Hello

  Windows operating system you are using?

  Method 1:

  Configure the computer to start clean, temporarily disable the firewall and Antivirus

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Wi - Fi and in Windows network connection issues

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps.

• security issues - Security Center displays all low security & access denied

  original title: security issues

  Down on my task bar that I have a flag with a red cross on it, when she opened States that all my safety is low iam unable to turn it back on ive tried to turn it on threw the Task Manager and it tells me access is denied, which makes no sense.

  Start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected. Options vary by region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/) in the USA at this time. After an initial free consultation, will be charged a fee for assistance, based on the details of the case.

• Question EA6500 Parental controls or restrictions on access

  I leaned on this router, I woujld would like to know if I can activate the Parental control or access restrictions to block an address IP or MAC; 03:00 - 06:00?

  Instead of midnight to 06:00.

  My E4200 works great, just would like to know if the EA6500 can do?

  Thank you

  Chris

  Yes, you can block a device on the network to access internet from 03:00 to 06:00.

  Excerpt from the screen I just took of my EA6500:

  

  As for blocking by IP address or MAC address directly, no, you can't, you need to select it in the list of devices, but from what I've seen, you must do so on the E4200 so it's nothing else.

  There are expierencing problems people with their device on the EA6500 lists, but I rarely had none since fimeware some updates there and generally to refresh the page or by clicking the Refresh button on the page, correct those when they happen to occur. (In my case).

  And in response the the second post, although it is only apart wireless and unrelated to parental control, the EA6500 has MAC filtering:

  

• Restrictions on access to URL blocking works not

  Hi, I have a WRT610N router, I am using for well over a year.  I tried to add URL, blocking access Restrictions screen and it doesn't work, no matter what I try.  For example, I entered just www.yahoo.com, yahoo.com and yahoo, but the router allows me to access the site Web of Yahoo.  I tried to get yahoo under the keyword blocking, but the router always allow access.

  The political deadlock is disables and there is no time to only selected day restrictions either.

  I've updated the firmware today (1.00.03 B15), restarted the modem and still no change in the deadlock.  Any thoughts?

  When you enter the Access Restriction, it of like the implementation of the restriction on the MAC address or IP in the list. First of all, you must enter the IP address range that you want to restrict. So take care to select Deny. All day must be selected if you want to restrict all the time. Finally, the the URL or keyword. Don't forget to save him.

• Restrict internet access to only three specific sites on behalf of the employee, but allows full access to the account manager

  Hi all

  In collaboration with a client who wishes to have a cell phone can be used by the staff and management at his restaurant. He wants management to an unrestricted administrator account, but wants the staff to have a user account restricted, such that they can only use web browsers to navigate to three specific sites. Have done the research on this for hours now and can't seem to find a solution to what should be a simple problem. All proposed software costs money, which the owner is not interested. Any help?

  Hello

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience.

  I hope that you will soon have the resolution of the issue of the TechNet forums.

  However, you can also consult the security forum as part of TechNet.
  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itprosecurity

  Thank you

• Restrictions on access to a USB flash drive

  good day... I have problem with all the USB flash drive... before, I can see flash drives in my computer and browse its content but now Windows does not show it in workstation.  Windows can still recognize flash drives but it will show under devices instead of workstation.  However, when I tried to browse the content of the flash player, I received this message: "this operation has been cancelled due to restrictions in effect on this computer.  Please contact your system administrator. "Because of this restriction, I can no longer navigate and access my files in my flash drive.  I check my user account and see that I am, log in as an administrator.

  I tried the solution to uninstall and reinstall the USB controllers and editing the registry (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\USBSTOR 'start = 3'), but nothing helped.  The problem is still there.  I can still access the files in my flash disk.  Moreover, my flash drives work perfectly well on other computers.
  Please help... Thank you very much.

  Hi thafaceface,

  Welcome to the forum.

  Before reinstalling Windows, I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.

  Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  • Go to Start, click all programs and open the Accessories.
  • Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  • In the command prompt, type the following command and press ENTER:
  • sfc/scannow

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Get back to us with the result of the analysis, and we will be happy to help you.

  Kind regards

• How to set the restriction to access CLI/DNIS-based 5.3?

  Hello

  is that someone has an idea how the setting

  define access restrictions CLI/DNIS-based which is defined in ACS v. 4.2

  can be configured in acs 5.3?

  in c. 4 for each user in a group with 40 members a different CLI is defined for each. How can I configure version 5.3?

  any help, as always, very much appreciated!

  The equivalebt to NAR features are:

  Elements of strategy > Session Conditions > network Conditions > end of Station filters

  Can then define an object with a set of values CLI

  These objects can then be used in conditions of insurance. So may create a condition with a set of values CLI and then match the authorization policy for values that are included in this set and set permissions accoridngly

  Don't know if it's your use case, but I hope that can be a start

• How to restrict user access to edit page content or page

  Hi all
  
  I want to restrict the user to access certain pages in my application or even if the user cannot access the page, you must disable to insert, change, or delete any item in the form on the page.
  
  Thanks and greetings

  Pankaj Kumar says:

  I want to restrict the user to access certain pages in my application or even if the user cannot access the page, you must disable to insert, change, or delete any item in the form on the page.

  You need to read the security of the APEXdocumentation, specifically using authorisation schemes to restrict access to pages and the rendering of the control of the components.