Issue of migration

Similar Questions

• DMVPN spoke of issues after migration double ISR2 3925 hub to ASR-1001 X

  Hello world

  After our hub solution migration DMVPN double ISR2 3925 to ASR - 1001 X (running asr1001x - universalk9.03.12.03.S.154 - 2.S3 - std.SPA.bin) we started to have some problems with tunnels rays beat (which goes up and down) and sometimes never came.

  Running 'show dmvpn' speak it is stuck in State PNDH to our hub. To solve the problem, we run 'stop' and then 'non-stop' on the tunnel interface to actually speak that DMVPN Monte. Also runs "clear encryption session " on the shelf often solves the problem. So, it seems that the question has something to do with IPSEC.

  When the problem occurred, and then debug crypto ipsec, crypto, crypto isakmp and crypto engine socket the following can be seen on the hub:

   Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Sending NOTIFY DPD/R_U_THERE protocol 1 spi 140130067548488, message ID = 629121681 Jun 25 10:01:41 SUMMERT: ISAKMP:(46580): seq. no 0x64B2238C Jun 25 10:01:41 SUMMERT: ISAKMP:(46580): sending packet to  my_port 500 peer_port 500 (I) QM_IDLE Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Sending an IKE IPv4 Packet. Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):purging node 629121681 Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Input = IKE_MESG_FROM_TIMER, IKE_TIMER_IM_ALIVE Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE Jun 25 10:01:41 SUMMERT: ISAKMP (46580): received packet from  dport 500 sport 500 ISP1-DMVPN (I) QM_IDLE Jun 25 10:01:41 SUMMERT: ISAKMP: set new node 3442686097 to QM_IDLE Jun 25 10:01:41 SUMMERT: ISAKMP:(46580): processing HASH payload. message ID = 3442686097 Jun 25 10:01:41 SUMMERT: ISAKMP:(46580): processing NOTIFY DPD/R_U_THERE_ACK protocol 1 spi 0, message ID = 3442686097, sa = 0x7F72986867D0 Jun 25 10:01:41 SUMMERT: ISAKMP:(46580): DPD/R_U_THERE_ACK received from peer , sequence 0x64B2238C Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):deleting node 3442686097 error FALSE reason "Informational (in) state 1" Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE Jun 25 10:01:42 SUMMERT: IPSEC: delete incomplete sa: 0x7F729923A438 Jun 25 10:01:42 SUMMERT: IPSEC(send_delete_notify_kmi): not sending KEY_ENGINE_DELETE_SAS Jun 25 10:01:42 SUMMERT: ISAKMP:(46580):purging node 1111296046 Jun 25 10:01:44 SUMMERT: ISAKMP (46580): received packet from  dport 500 sport 500 ISP1-DMVPN (I) QM_IDLE Jun 25 10:01:44 SUMMERT: ISAKMP: set new node 928225319 to QM_IDLE Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing HASH payload. message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing SA payload. message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Checking IPSec proposal 1 Jun 25 10:01:44 SUMMERT: ISAKMP: transform 1, ESP_AES Jun 25 10:01:44 SUMMERT: ISAKMP: attributes in transform: Jun 25 10:01:44 SUMMERT: ISAKMP: encaps is 2 (Transport) Jun 25 10:01:44 SUMMERT: ISAKMP: SA life type in seconds Jun 25 10:01:44 SUMMERT: ISAKMP: SA life duration (basic) of 3600 Jun 25 10:01:44 SUMMERT: ISAKMP: SA life type in kilobytes Jun 25 10:01:44 SUMMERT: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 Jun 25 10:01:44 SUMMERT: ISAKMP: authenticator is HMAC-SHA Jun 25 10:01:44 SUMMERT: ISAKMP: key length is 256 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):atts are acceptable. Jun 25 10:01:44 SUMMERT: CRYPTO_SS(TUNNEL SEC): Active open, socket info: local  /255.255.255.255/0, remote  /255.255.255.255/0, prot 47, ifc Tu3300 Jun 25 10:01:44 SUMMERT: IPSEC(recalculate_mtu): reset sadb_root 7F7292E64990 mtu to 1500 Jun 25 10:01:44 SUMMERT: CRYPTO_SS(TUNNEL SEC): Sending Socket Ready message Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing NONCE payload. message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing ID payload. message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing ID payload. message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):QM Responder gets spi Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Node 928225319, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Node 928225319, Input = IKE_MESG_INTERNAL, IKE_GOT_SPI Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Old State = IKE_QM_SPI_STARVE New State = IKE_QM_IPSEC_INSTALL_AWAIT Jun 25 10:01:44 SUMMERT: IPSEC(crypto_ipsec_sa_find_ident_head): reconnecting with the same proxies and peer  Jun 25 10:01:44 SUMMERT: IPSEC(crypto_ipsec_update_ident_tunnel_decap_oce): updating profile-shared Tunnel3300 ident 7F7298B2BF80 with lookup_oce 7F7296BF5440 Jun 25 10:01:44 SUMMERT: IPSEC(create_sa): sa created, (sa) sa_dest= , sa_proto= 50, sa_spi= 0x14F40C56(351538262), sa_trans= esp-aes 256 esp-sha-hmac , sa_conn_id= 27873 sa_lifetime(k/sec)= (4608000/3600), (identity) local= :0, remote= :0, local_proxy= /255.255.255.255/47/0, remote_proxy= /255.255.255.255/47/0 Jun 25 10:01:44 SUMMERT: IPSEC(create_sa): sa created, (sa) sa_dest= , sa_proto= 50, sa_spi= 0x3B4731D7(994521559), sa_trans= esp-aes 256 esp-sha-hmac , sa_conn_id= 27874 sa_lifetime(k/sec)= (4608000/3600), (identity) local= :0, remote= :0, local_proxy= /255.255.255.255/47/0, remote_proxy= /255.255.255.255/47/0 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Received IPSec Install callback... proceeding with the negotiation Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Successfully installed IPSEC SA (SPI:0x14F40C56) on Tunnel3300 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): sending packet to  my_port 500 peer_port 500 (I) QM_IDLE Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Sending an IKE IPv4 Packet. Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Node 928225319, Input = IKE_MESG_FROM_IPSEC, IPSEC_INSTALL_DONE Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Old State = IKE_QM_IPSEC_INSTALL_AWAIT New State = IKE_QM_R_QM2 Jun 25 10:01:44 SUMMERT: ISAKMP (46580): received packet from  dport 500 sport 500 ISP1-DMVPN (I) QM_IDLE Jun 25 10:01:44 SUMMERT: ISAKMP: set new node 1979798297 to QM_IDLE Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing HASH payload. message ID = 1979798297 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing NOTIFY PROPOSAL_NOT_CHOSEN protocol 3 spi 351538262, message ID = 1979798297, sa = 0x7F72986867D0 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): deleting spi 351538262 message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):deleting node 928225319 error TRUE reason "Delete Larval" Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):peer does not do paranoid keepalives. Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Enqueued KEY_MGR_DELETE_SAS for IPSEC SA (SPI:0x3B4731D7) Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):deleting node 1979798297 error FALSE reason "Informational (in) state 1" Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE Jun 25 10:01:44 SUMMERT: IPSEC: delete incomplete sa: 0x7F729923A340 Jun 25 10:01:44 SUMMERT: IPSEC(key_engine_delete_sas): delete SA with spi 0x3B4731D7 proto 50 for  Jun 25 10:01:44 SUMMERT: IPSEC(update_current_outbound_sa): updated peer  current outbound sa to SPI 0 Jun 25 10:01:44 SUMMERT: IPSEC(send_delete_notify_kmi): not sending KEY_ENGINE_DELETE_SAS Jun 25 10:01:44 SUMMERT: CRYPTO_SS(TUNNEL SEC): Sending request for CRYPTO SS CLOSE SOCKET

   #sh pl ha qf ac fe ipsec data drop ------------------------------------------------------------------------ Drop Type Name Packets ------------------------------------------------------------------------ 3 IN_US_V4_PKT_FOUND_IPSEC_NOT_ENABLED 127672 19 IN_OCT_ANTI_REPLAY_FAIL 13346 20 IN_UNEXP_OCT_EXCEPTION 4224 33 OUT_V4_PKT_HIT_IKE_START_SP 1930 62 IN_OCT_MAC_EXCEPTION 9 #sh plat hard qfp act stat drop | e _0_ ------------------------------------------------------------------------- Global Drop Stats Packets Octets ------------------------------------------------------------------------- Disabled 1 82 IpFragErr 170536 246635169 IpTtlExceeded 4072 343853 IpsecIkeIndicate 1930 269694 IpsecInput 145256 30071488 Ipv4Acl 2251965 215240194 Ipv4Martian 6248 692010 Ipv4NoAdj 43188 7627131 Ipv4NoRoute 278 27913 Ipv4Unclassified 6 378 MplsNoRoute 790 69130 MplsUnclassified 1 60 ReassTimeout 63 10156 ServiceWireHdrErr 2684 585112

  In addition, after you run "logging dmvpn rate-limit 20' on the hub

   %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel292: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) on (Tunnel:  NBMA: )

  On the talks both the following can be seen debugging as well:

   *Jun 25 09:17:26.884: ISAKMP:(1032): sitting IDLE. Starting QM immediately (QM_IDLE ) *Jun 25 09:17:26.884: ISAKMP:(1032):beginning Quick Mode exchange, M-ID of 1599359281 *Jun 25 09:17:26.884: ISAKMP:(1032):QM Initiator gets spi *Jun 25 09:17:26.884: ISAKMP:(1032): sending packet to  my_port 500 peer_port 500 (R) QM_IDLE *Jun 25 09:17:26.884: ISAKMP:(1032):Sending an IKE IPv4 Packet. *Jun 25 09:17:26.884: ISAKMP:(1032):Node 1599359281, Input = IKE_MESG_INTERNAL, IKE_INIT_QM *Jun 25 09:17:26.884: ISAKMP:(1032):Old State = IKE_QM_READY New State = IKE_QM_I_QM1 *Jun 25 09:17:26.940: ISAKMP (1032): received packet from  dport 500 sport 500 Global (R) QM_IDLE *Jun 25 09:17:26.940: ISAKMP:(1032): processing HASH payload. message ID = 1599359281 *Jun 25 09:17:26.940: ISAKMP:(1032): processing SA payload. message ID = 1599359281 *Jun 25 09:17:26.940: ISAKMP:(1032):Checking IPSec proposal 1 *Jun 25 09:17:26.940: ISAKMP: transform 1, ESP_AES *Jun 25 09:17:26.940: ISAKMP: attributes in transform: *Jun 25 09:17:26.940: ISAKMP: encaps is 2 (Transport) *Jun 25 09:17:26.940: ISAKMP: SA life type in seconds *Jun 25 09:17:26.940: ISAKMP: SA life duration (basic) of 3600 *Jun 25 09:17:26.940: ISAKMP: SA life type in kilobytes *Jun 25 09:17:26.940: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jun 25 09:17:26.940: ISAKMP: authenticator is HMAC-SHA *Jun 25 09:17:26.940: ISAKMP: key length is 256 *Jun 25 09:17:26.940: ISAKMP:(1032):atts are acceptable. *Jun 25 09:17:26.940: IPSEC(ipsec_process_proposal): proxy identities not supported *Jun 25 09:17:26.940: ISAKMP:(1032): IPSec policy invalidated proposal with error 32 *Jun 25 09:17:26.940: ISAKMP:(1032): phase 2 SA policy not acceptable! (local  remote ) *Jun 25 09:17:26.940: ISAKMP: set new node -1745931191 to QM_IDLE *Jun 25 09:17:26.940: ISAKMP:(1032):Sending NOTIFY PROPOSAL_NOT_CHOSEN protocol 3 spi 834718720, message ID = 2549036105 *Jun 25 09:17:26.940: ISAKMP:(1032): sending packet to  my_port 500 peer_port 500 (R) QM_IDLE *Jun 25 09:17:26.940: ISAKMP:(1032):Sending an IKE IPv4 Packet. *Jun 25 09:17:26.940: ISAKMP:(1032):purging node -1745931191 *Jun 25 09:17:26.940: ISAKMP:(1032):deleting node 1599359281 error TRUE reason "QM rejected" *Jun 25 09:17:26.940: ISAKMP:(1032):Node 1599359281, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH *Jun 25 09:17:26.940: ISAKMP:(1032):Old State = IKE_QM_I_QM1 New State = IKE_QM_I_QM1 *Jun 25 09:17:34.068: ISAKMP (1032): received packet from  dport 500 sport 500 Global (R) QM_IDLE *Jun 25 09:17:34.068: ISAKMP: set new node 1021264821 to QM_IDLE *Jun 25 09:17:34.072: ISAKMP:(1032): processing HASH payload. message ID = 1021264821 *Jun 25 09:17:34.072: ISAKMP:(1032): processing NOTIFY DPD/R_U_THERE protocol 1 spi 0, message ID = 1021264821, sa = 0x32741028 *Jun 25 09:17:34.072: ISAKMP:(1032):deleting node 1021264821 error FALSE reason "Informational (in) state 1" *Jun 25 09:17:34.072: ISAKMP:(1032):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY *Jun 25 09:17:34.072: ISAKMP:(1032):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE *Jun 25 09:17:34.072: ISAKMP:(1032):DPD/R_U_THERE received from peer , sequence 0x64B2279D *Jun 25 09:17:34.072: ISAKMP: set new node 716440334 to QM_IDLE *Jun 25 09:17:34.072: ISAKMP:(1032):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1 spi 834719464, message ID = 716440334 *Jun 25 09:17:34.072: ISAKMP:(1032): seq. no 0x64B2279D *Jun 25 09:17:34.072: ISAKMP:(1032): sending packet to  my_port 500 peer_port 500 (R) QM_IDLE *Jun 25 09:17:34.072: ISAKMP:(1032):Sending an IKE IPv4 Packet. *Jun 25 09:17:34.072: ISAKMP:(1032):purging node 716440334 *Jun 25 09:17:34.072: ISAKMP:(1032):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE *Jun 25 09:17:34.072: ISAKMP:(1032):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE *Jun 25 09:17:35.356: ISAKMP:(1032):purging node 206299144

  Obviously something seems to be wrong Phase 2 not to come. But why is it going up after having erased the session encryption or close the tunnel interface and activate the interface of tunnel has spoken?

  Very weird. Also, in looking at att the hub debugging messages it seems that Cryptography is associated with evil Tu3300 tunnel interface when it is Tu2010. Normal or Bug?

  The configuration of the hub looks like this:

   crypto keyring ISP1-DMVPN vrf ISP1-DMVPN pre-shared-key address 0.0.0.0 0.0.0.0 key  crypto isakmp policy 10 encr aes authentication pre-share crypto isakmp keepalive 10 3 periodic crypto isakmp nat keepalive 10 crypto isakmp profile ISP1-DMVPN keyring ISP1-DMVPN match identity address 0.0.0.0 ISP1-DMVPN keepalive 10 retry 3 crypto ipsec transform-set AES256-MD5 esp-aes 256 esp-md5-hmac mode tunnel crypto ipsec transform-set AES256-SHA-TRANSPORT esp-aes 256 esp-sha-hmac mode transport crypto ipsec profile ISP1-DMVPN set transform-set AES256-SHA AES256-SHA-TRANSPORT set isakmp-profile ISP1-DMVPN vrf definition ISP1-DMVPN description DMVPN-Outside-ISP1 rd 65527:10 ! address-family ipv4 exit-address-family ! ! interface TenGigabitEthernet0/0/0 no ip address ! interface TenGigabitEthernet0/0/0.71 description VPN;ISP1-DMVPN;Outside;VLAN71 encapsulation dot1Q 71 vrf forwarding ISP1-DMVPN ip address  255.255.255.128 no ip proxy-arp ip access-group acl_ISP1-DMVPN_IN in ! ip route vrf ISP1-DMVPN 0.0.0.0 0.0.0.0  name ISP1;Default ip access-list extended acl_ISP1-DMVPN_IN permit icmp any any permit esp any host  permit gre any host  permit udp any host  eq isakmp permit udp any host  eq non500-isakmp deny ip any any vrf definition 2010  description CUSTA - Customer A  rd 65527:2010 route-target export 65527:2010 route-target import 65527:2010 ! address-family ipv4 exit-address-family ! ! interface Tunnel2010 description CUSTA;DMVPN;Failover-secondary vrf forwarding 2010 ip address 10.97.0.34 255.255.255.240 no ip redirects ip mtu 1380 ip nhrp map multicast dynamic ip nhrp network-id 2010 ip nhrp holdtime 120 ip nhrp server-only ip nhrp max-send 1000 every 10 ip tcp adjust-mss 1340 tunnel source TenGigabitEthernet0/0/0.71 tunnel mode gre multipoint tunnel key 2010 tunnel vrf ISP1-DMVPN tunnel protection ipsec profile ISP1-DMVPN shared router bgp 65527 ! address-family ipv4 vrf 2010 redistribute connected metric 10 redistribute static metric 15 neighbor 10.97.0.39 remote-as 65028 neighbor 10.97.0.39 description spokerouter;Tunnel1 neighbor 10.97.0.39 update-source Tunnel2010 neighbor 10.97.0.39 activate neighbor 10.97.0.39 soft-reconfiguration inbound neighbor 10.97.0.39 prefix-list EXPORT-IVPN-VRF2010 out neighbor 10.97.0.39 route-map AllVRF-LocalPref-80 in neighbor 10.97.0.39 maximum-prefix 5000 80 default-information originate exit-address-family

  Configuring spoke:

   crypto keyring DMVPN01 pre-shared-key address 0.0.0.0 0.0.0.0 key  crypto isakmp policy 10 encr aes authentication pre-share crypto isakmp invalid-spi-recovery crypto isakmp profile DMVPN01 keyring DMVPN01 match identity address 0.0.0.0 keepalive 10 retry 3 crypto ipsec transform-set AES256-SHA esp-aes 256 esp-sha-hmac mode tunnel crypto ipsec transform-set AES256-SHA-TRANSPORT esp-aes 256 esp-sha-hmac mode transport crypto ipsec profile DMVPN01 set transform-set AES256-SHA-TRANSPORT set isakmp-profile DMVPN01 vrf definition inside rd 65028:1 route-target export 65028:1 route-target import 65028:1 ! address-family ipv4 exit-address-family ! interface Tunnel1 description DMVPN to HUB vrf forwarding inside ip address 10.97.0.39 255.255.255.240 no ip redirects ip mtu 1380 ip nhrp map 10.97.0.33  ip nhrp map multicast  ip nhrp map 10.97.0.34  ip nhrp map multicast  ip nhrp network-id 1 ip nhrp holdtime 120 ip nhrp nhs 10.97.0.33 ip nhrp nhs 10.97.0.34 ip nhrp registration no-unique ip nhrp registration timeout 60 ip tcp adjust-mss 1340 tunnel source GigabitEthernet0/0 tunnel mode gre multipoint tunnel key 2010 tunnel protection ipsec profile DMVPN01 shared router bgp 65028 ! address-family ipv4 vrf inside bgp router-id 172.28.5.137 network 10.97.20.128 mask 255.255.255.128 network 10.97.21.0 mask 255.255.255.0 network 10.97.22.0 mask 255.255.255.0 network 10.97.23.0 mask 255.255.255.0 network 172.28.5.137 mask 255.255.255.255 neighbor 10.97.0.33 remote-as 65527 neighbor 10.97.0.33 description HUB1;Tunnel2010 neighbor 10.97.0.33 update-source Tunnel1 neighbor 10.97.0.33 timers 10 30 neighbor 10.97.0.33 activate neighbor 10.97.0.33 send-community both neighbor 10.97.0.33 soft-reconfiguration inbound neighbor 10.97.0.33 prefix-list IROUTE-EXPORT out neighbor 10.97.0.33 maximum-prefix 5000 80 neighbor 10.97.0.34 remote-as 65527 neighbor 10.97.0.34 description HUB2;tunnel2010 neighbor 10.97.0.34 update-source Tunnel1 neighbor 10.97.0.34 timers 10 30 neighbor 10.97.0.34 activate neighbor 10.97.0.34 send-community both neighbor 10.97.0.34 soft-reconfiguration inbound neighbor 10.97.0.34 prefix-list IROUTE-EXPORT out neighbor 10.97.0.34 route-map AllVRF-LocalPref-80 in neighbor 10.97.0.34 maximum-prefix 5000 80 exit-address-family 

  If more information is needed, please say so.

  Any help or advice would be greatly appreciated!

  Thank you!

  It is possible that you touch it--the failure of negotiations of phase 2:

  https://Tools.Cisco.com/bugsearch/bug/CSCup72039/?reffering_site=dumpcr

  [Too little detail to say with certainty:]

  M.

• Issues after migration to one macbook to another.

  I've just migrated from my macbook pro15 to a new macbook pro 13 retina.

  I migrated my files and applications anywhere in the transfer from one machine to another and now I have problems with Photoshop CC.

  I can't open Photoshop as it asks me to install the Application Cloud Creative Manager, that I previously had installed and should therefore be met.

  I tried to download it and install it, but repeatedly get an accident shortly after it starts the process.

  I tried to uninstall the existing applications and start from scratch, but they will not uninstall without the application manager. I ' v been deleted manually to see if that would help, but no joy.

  I am at a loss as to how I can get the apps on the machine.

  Any help appreciated.

  See you soon

  Chris

  If it's good for you, remove all Apps and Adobe on folders and then install again as a new Installation, it will be ideal to avoid these problems somewhat in the future. As you had migrated Apps and its support files.

  Just uninstall and reinstall will overwrite the files on an existing folder that is very well . But complete removal and re-setup is ideal.

  Good to know information about full manual removal and re-setup process,

  (1) trash Adobe apps to Applications.

  (2) trash below mentioned cases of Applications > utilities.

  
  

  • Adobe Creative Cloud
  • Adobe Application Manager
  • Adobe utility.
  • Adobe Installers.

  
  

  3) files Adobe garbage below locations.

  
  

  Files from Adobe will be present inside the Application Support folder.

  ~/Library/Application support /    [ User library ]

  /Library/Application Support /     [ Library system ]

  Then run Adobe Cleaner tool and select the option all own .

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  Then install Adobe Creative Cloud app.

• Issue of Migration cold

  When you perform a cold migration when starting from CD you get a prompt that shows "no available network connection. You want to update the settings of the network at this time. "

  My question is when you click Yes, you get the options to statically assign IP, subnet, default gateway, and dns...

  Here - would you enter the IP address of the physical server you are trying to migrate? or would that be a new IP for VMware Converter to connect to the network?

  It depends on the operating system and the type/use of the system (e.g. domain controller, Exchange server,...).

  Basically, you shouldn't ever hot convert a domain controller, because this will usually damage the AD. For Exchange of data bases, etc., you should consider to stop services to have a consistent state without open files.

  André

• Issue of Migration cold very Simple...

  Hey guys,.

  I'm relatively new to VMWare, infact, I take the vcp - 310 exam tomorrow, lucky me!  In any case, I have a very simple question, basically I can't find all the information on how to do a migration cold or in fact if it is the right solution to my problem.  I rebuilt my server ESX (3.5) and kept the VMFS volume local orginal up thanks to its VMs located on it.  Now, I want to attach them to the newly installed ESX, I can easily create new ones and add the drive but that is not the same, for example will be difference NVRAM, VMX, etc. files.  Is "cold migration" what I'm looking for?  Or is there another way I can fix this?

  Thanks in advance for your help.

  See you soon

  Neilos

  witch hunt... Just find the data store in which the virtual machine is on, browse this data store, find the virtual computers folder and inside you will see a .vmx file.  Right click on that and choose 'Add to inventory' and follow the prompts.

• The issue of Migration

  Hi all
  
  We intend to migrate our oracle database server to the new server. We have apex 3.1.2 installed on the old server. We intend to install an Apex 4.0 on the new server.
  What is the best way to migrate the existing application to the new server? I appreciate your help.
  
  Thank you

  Hi James,

  If you do not have too many applications I could import them to the new server one by one.

  But the other approach works as well.

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  Work: http://www.click-click.at

• Migrating from a version of the 11.1.1.3.0 for 11.1.1.7.0 ADF application.

  Hello

  I have a n requirement to migrate a version of the 11.1.1.3.0 for 11.1.1.7.0 ADF application.

  I just used JDeveloper 11.1.1.7.0 helps to migrate.

  What I need to follow measures during migration or any specific changes required for this.

  Any suggestions for this migration.

  I thank very you much for your time.

  Kind regards

  Konda Reddy

  dvohra21 migration of an extension isn't applications same then migration.

  Konda, you should check the release notes for the target version, where you should find some information about the migration from versions older. In your case check 11 g R1 (11.1.1.7.0) Release Notes and look for issues on migration. You can then access information on Certification that the migration is possible.

  Timo

• Migrate the contents of the AAU 10 g at the University Complutense of MADRID 11 g

  Hello
  
  I'm a newbie in the Complutense University of MADRID and is involved in an internal project as a consultant. For the moment, I am facing following 2 questions:
  
  1. How can import the structure of UCM 10 records g at the University Complutense of MADRID 11 g (11.1.1.5.0)? Is there an automated way to do this?
  2. How can migrate the contents of the AAU 10 g at the University Complutense of MADRID 11 g (11.1.1.5.0)? Is there an automated in this way?
  
  Can you please suggest any documentation on above or would be happy if you could share your knowledge about it. Can you tell me if there are traps or how to do the above, I must avoid.
  
  I googled for hours to find info on the issue of migration. I found this document:
  http://download.Oracle.com/docs/CD/E22203_01/ doc.31 /e20664/chapter_13.htm
  
  and this thread:
  Data migration from ucm10gR3 to ecm 11 GR 1 material: 11.1.1.5.0
  
  I need a more progressive direction.
  
  Appreciate all the help I can get :)

  Hello

  These are the 2 sql queries that you must run on schema UCM to be able to use the Stand Alone on UCM 11 g cmdlets:

  update users set dpasswordencoding = "where dname as 'sysadmin ';

  update users set dpassword = "idc" where dname like 'sysadmin ';

  After this connection for applets on ucm 11g.

  Thank you
  Srinath

• Why TB does not freeze when I click on account settings? (Goes from bad to worse!)

  A few days ago, I posted a question about migration backup emails in TB. I got help, but not a definitive answer to my problems. Unfortunately, my wife and I seem to have created an additional problem which must be resolved before we return to the issue of migration of file. Now, TB freezes when I try to check the settings of an account. This may be due to our attempt to copy an old e-mail folder (file .sbd), in my current profile. That's how it happened:

  We copied a saved .sbd folder to
  C:\Users\FF\AppData\Roaming\Thunderbird\Profiles\pnp8j2nf.default\Mail\Local records
  We have not seen any change in TB.

  Then, in TB, we created a folder under local folders, giving it the same name as the .sbd that we had copied. The content become so visible in TB.

  When I tried to check the settings of an account, TB has frozen. Restart TB did not help. Then we tried to go back to our previous steps by deleting the folder newly created in TB and .sbd file in local folders. I restarted TB and PC, but TB still freezes when we try to check the account settings.

  Think that we could have corrupted profile, we also renamed the 8 character profiles .default under C:\Users\FrankF\AppData\Local\Thunderbird\Profiles and C:\Users\FrankF\AppData\Roaming\Thunderbird\Profiles, hoping TB would generate a new profile, but now the TB does not start without the profile.

  We wonder if we should remove profiles.ini or remove its contents to force TB to create a new profile. Any advice on which are originally the gel and how to fix? Thanks in advance.

  Apparent victory! I copied my saved files (trrevilc.default) to

  C:\Users\FF\AppData\Roaming\Thunderbird\Profiles and edited profiles.ini, changing -
  

  [Agroalimentaire1]
  Name =TB difficulty
  IsRelative = 1
  Path = Profiles /kdtnv197. Fix TB
  Default = 1

  TO

  [Agroalimentaire1]
  Name =PlanetXP
  IsRelative = 1
  Path = Profiles /trrevilc.default
  Default = 1

  and Voila! my darlings old emails and accounts reappeared... even though I have an e-mail account w a problem.

  I'm still wondering (after I backup C:\Users\FF) the best way to remove the other profiles. Suggestions would be appreciated. Thanks again.

• The Msata SSD on HP Pavilion 14-n033TX update

  Hi, I bought my new laptop HP Pavilion 14-n033TX with SSD specified 24 GB cache. I want to upgrade the SSD in drive for windows startup and have more storage for SSDS? The specifications of the SSD I need? m sata, half size or size and what is the maximum size for this? Thank you.

  There are several ways to do so. Several SSD (Samsung for example) is issued with migration software (CD), but you'll need an adapter usb to SATA like that.

  http://www.Amazon.com/Patuoxun-converter-adapter-cable-drive/DP/B008ASF5MC/ref=sr_1_1?ie=UTF8&QID=1407765939&SR=8-1&keywords=USB+to+SATA

  Just connect the external SSD drive with this device and the boot of cloning a disk and follow the prompts to copy. Make sure the SSD you buy is greater than the data currently installed on the old drive. The clone will smoother copies two disks of the same size, but you can resize. Just be careful actual scores of Windows 8 that in some cases if you make them too small, you can't start or system of things like the Windows backup will not work.

  If you have another external drive, you can also do a full Windows system backup and then restore the backup by using a Windows repair disk or OS installation disc.

  Personally, I use Acronis True Image 2014 (older versions will not work with Windows 8).

  http://www.acronis.com/en-us/personal/pc-backup/?adpos=1t1&device=c&network=g&matchtype=b&creative=44836518617&gclid=Cj0KEQjw06GfBRCR9tDI4t6n5_MBEiQAFo6kuKlWUPWzHg3ZofpygwRHifSLDq0VVFocq9wW9ZF1gqMaAttq8P8HAQ

  The trial version used to work for cloning, but they removed this feature. It costs $50 now; for me is worth I clone a lot of readers, but you probably want something for free.

  When you cloned the old disk to the disk SSD just Exchange the SSD in laptop hard drive Bay.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• While putting the host in maintenance mode, I'm stuck at 2%

  While putting the host in maintenance mode, I'm stuck at 2%

  With the message at 2% it get stuck below.

  "Waiting for machines virtual to be powered off or migrated. In a DRS cluster, see the page of defects on the tab of the DRS for troubleshooting. "

  When you put a host in Maintenance Mode, the virtual machine will be generally migrated to other hosts automatically by the Drs there are reasons why it would not work.

  Some of them are:

  • You do not have DRS licensed (only included in Enterprise and Enterprise Plus)
  • DRS is set to manual
  • You have the DRS, but the virtual machine connected local resources (such as the CD-ROM player,...)
  • You have the DRS, but there are no hosts available because of rules configured to affinity/Anti-Affinity
  • Not available on other host resources

  In both cases, you will have to solve the issue and migrate virtual machines to other hosts or stop the virtual machines. As soon as he has no more power on virtual machines on the host, it will enter into Maintenance Mode.

  André

• Manual upgrade with operating system and change in the architecture

  Hello
  
  I would like to describe a manual upgrade on Oracle [837570.1 ID] support, but I can't find information on the use of this method on the non-uniform type of OS, especially when the architecture is different. For example, is it possible to update as in metalink note, when the source database is Windows x 32 and target database is Linux x 64? Is there additional scripts or catupgrd this decision-making process?
  
  Best.

  If you have non-uniform platforms then you can install the desired version of Oracle on the new server and use import/export to transfer data. This works well enough for any combination of platform as long as versions of Oracle are not too far apart.

  The transportable tablespace option can work if the databases are two 10 g + with rman endian conversion.

  Here are two notes of Oracle support on this issue:

  Migration of Oracle database on platforms OS 733205.1 Instances

  Compatibility for Exp & Imp Btwn Diff Oracle worm matrix: 132904.1

  HTH - Mark D Powell.

• W2K8 R2 Licensing Issue: passes during the migration of parallel hardware

  We have a very old application server run on W2K8 R2 stand-alone (no advertising).  We decide to migrate the server to new hardware.

  Freshly install us the operating system, create user accounts, and install the application on the new hardware.  To play safe, we intend to have a parallel run for 3-4 weeks.

  Our question is: will there be a problem when we apply the OS on the new server license?  Where could I find more resources on licensing issues associated with these migrations?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• DTA migration issues

  In order to gain visibility for DTA migration issues I've mentioned several times in other threads, I thought I would post a new thread and kick off the coast with two of my favorites:

  Events of 'no time' 1) recurring are moved to the previous day.  If you look in the .mdb (Microsoft Access) data tables, created by the new Palm Desktop 6.2.2 you will see that these events are stored in GMT, instead of any time you have set.  If you're at (for example) EST/EDT, then a "free time" event in GMT will begin the day previous (GMT 5/4 hours located prior to the EST/EDT).  Palm Desktop 6.2.2 these events appears correctly (maybe corrected 'on the fly' for a few screws previously known upward in previous versions from the Palm Desktop or Palm devices stored these events), but during the migration to the front via DTA, they appear the previous day.

  (2) recurring events which were to "12 months" (instance, father's day, which is the 3rd Sunday of June, is set up by placing the event initial OK Sunday of June and then by setting the recurrence for "3rd Sunday of each month 12") are changed during migration via DTA the Pre, reproduce every month.

  These are both very reproducible and took place during three separate migrations of DTA.  The Calendar database have been verified by the latest version of DbFixIt and found no problem. The Treo 700 p and Palm Desktop 4.1.4 and now 6.2.2 display them correctly.  Only the Pre after migration DTA shows these questions.  The Pre is runnning WebOS 1.0.4 and is configured to only use the Palm profile for the backup.

  I'm ready to ask for a SOLUTION to these two questions, with these workaround solutions:

  (1) to prevent the traffic events "without time" days prior (for those of you at the time of the zones West of GMT/UTC) Please make sure that your pre got your time zone local network, or if not, that you set your time zone manually to match that of your host, before migrating to the DTA.

  (2) If you have each year (in fact any interval of more than 9 'days', 'weeks', 'months', or 'years') "byday" (e.g., 3rd Sunday of June) or events (e.g., May 13) "bymonthday", you will need to:

  (a) after the execution of DTA 1.1, and before unplugging the USB before, open a window File Explorer and move the file migration.mig from PRE USB key to your computer.  After that, you can leave the pre connected or not, depending on your needs.  As long as the migration file is not in the USB when the Pre is disconnected, it does not start a data migration.

  (b) using a suitable text editor (for example, Wordpad on Windows), do a find on (for example) "FREQ = MONTHLY; INTERVAL = 1"(without the quotes).  Inspect the field 'SUMMARY' current record "VCALENDAR" to determine if this is really a monthly event or (for example) "byday" or "bymonthday".  If the latter, change the 'INTERVAL = 1' clause' RANGE = 12' (or whatever the actual range is supposed to be.  Repetition of finding suspicious items until you are satisfied you have found and fixed all.

  (c) save the modified file.  Check the file name to ensure that Windows has not renamed it "migration.mig.txt".  If so, rename it to "migration.mig".

  (d) If you had unplugged the meadow at the end of step one), he re - connect as a USB and copy the file "migration.mig" forwards, in the root of the USB stick.  When you do a "safely removing" pre, it will find the migration.mig file and start the migration.  With WebOS 1.1, the pre now entertains you with a progress indicator.  This is actually very useful, because if you connect the Pre to as a USB key before the migration is complete, it will start a 2nd an and start in double filling your calendar, etc.  So be patient and wait until the migration is completed before making any transfer files USB with the Pre.

  This procedure should be performed with the DTA 1.1 (or a later version, if later versions don't fix this issue) and WebOS 1.1 (which seems to have solved the calendar gray/frozen screens that had suffered me since the day 1 of pre availability (06/06/09 in the United States).) Please note that this is a problem with the program of the DTA, not WebOS, so it cannot be solved with a future WebOS update (Garbage In, Garbage Out or GIGO as say the).  Please note that I am not synchronized with any service, but use the Palm profile as backup.

  Now that I feel I have a pretty good handle on getting a solid migration of DTA, I'll probably then address a Google account instead of the Palm profile synchronization and see what falls from that.

  Thank you, PDAGuy and Anachronistic, for all your help.

  EDIT: I found a new failure in the timing of the front.  I'll start a new thread, so we can more easily track it separately.

  Message edited by theoldmoose on 10/08/2009 21:02

• ESXi 4.1, ESXi 5.1 - migration of data base and other issues

  Hello, we have a pretty small environment ESXi 4.1 Enterprise Plus
  with 3 guests. We have a standalone physical SQL server that hosts the database
  and a VM Server 2008 64 bit running vCenter. I wanted to use Server 2008 R2
  for the vCenter, so I intend to install a new VM running this OS. Is it possible
  the new basis of use 4.1 existing vCenter 5.1 (I guess he needs to)
  mise_a_jour/migration) and have 3 4.1 ESXi hosts to vCenter 5.1 report? I have
  then remove the vCenter 4.1 and upgrade the hosts of 4.1 to 5.1. The
  Another option Im contemplating implements the vCenter 5.1 with a new SQL
  database.

  Also there are issues keeping the hosts at 4.1 when using
  vCenter 5.1 for a few weeks?

  Thank you!

  Is it possible to have the new vCenter 5.1 using the existing base of 4.1

  Years: This is not possible, during the upgrade to vCenter Server 4.1 to 5.1, I saw the database schema changes. Schema be compatible freshly installing vCenter server 5.1 and connects to the 4.1 database and do not support.

  A report of hosts ESXi 4.1 3 Center 5.1?

  Years: It is possible, ESXi4.1 works seamlessly with vCenter Server 5.1. Once you upgrade to vCenter server 5.1 level, all the host esx4.1 will connect to improved vCenter Server 5.1

  The other option I'm contemplating implements the vCenter 5.1 with a new SQL database.

  Years: you lose all configurations and need to connect ESX4.1 to the new host Server 5.1 and reconfiguration

  Also is there any problem keeping the hosts to 4.1 using vCenter 5.1 for a few weeks?

  Years: As mentioned above, it works and it is compatible.