Issue of Migration cold

Similar Questions

• Issue of Migration cold very Simple...

  Hey guys,.

  I'm relatively new to VMWare, infact, I take the vcp - 310 exam tomorrow, lucky me!  In any case, I have a very simple question, basically I can't find all the information on how to do a migration cold or in fact if it is the right solution to my problem.  I rebuilt my server ESX (3.5) and kept the VMFS volume local orginal up thanks to its VMs located on it.  Now, I want to attach them to the newly installed ESX, I can easily create new ones and add the drive but that is not the same, for example will be difference NVRAM, VMX, etc. files.  Is "cold migration" what I'm looking for?  Or is there another way I can fix this?

  Thanks in advance for your help.

  See you soon

  Neilos

  witch hunt... Just find the data store in which the virtual machine is on, browse this data store, find the virtual computers folder and inside you will see a .vmx file.  Right click on that and choose 'Add to inventory' and follow the prompts.

• Migration cold - how many simultaneous servers

  We have a customer moving servers from one host to another host in the same ms. We do a migration cold because there are some limitations to this customer and no SAN/storage network so all local drives on the host server. Although we can now do vMotion without storage applications SAN/network has some limitations too and client wants to move which is supported by the seller and do not go by what VMWare can support. Our question is when we make cold migration using vCenter doing this option, stop comments right click migrate host and data store servers how can we move simultaneously at once a single server at a time, or we can do more than one. Any help would be appreciated. I am less familiar with this side of vmware, so feel free to ask for more information in case if I did not understand our scenario.

  VCenter is 5.5

  Esxi host on source version is 5.1 and destination is 5.5.

  There is a little math to do, but you can see the rates here: https://pubs.vmware.com/vsphere-55/index.jsp?topic=%2Fcom.vmware.vsphere.vcenterhost.doc%2FGUID-25EA5833-03B5-4EDD-A167-87578B8009B3.html

• Migration cold trip via lan or san?

  Assuming that VM moves to the data store CF on the same host or different host with the same access to FC storage shared... migration cold trip via lan or FC san?

  If you change data on the same host warehouses, data are transferred through HBA.  If changing hosts but vm location does not change, it changes just the host on which the virtual computer is marked (e) on.  If you change hosts and data warehouses, it goes on network.

• Make pseudo migration cold with free ESXi 3.5 VI Client?

  Even if I used VMware products for years (Workstation, Server), I'm still pretty new to ESXi.  I started using the free ESXi with the idea to be able to live migration between ESXi hosts.  However, I then discovered that you can't do vMotion with free stuff.  No biggie; I probably don't need it anyway.  All I really need is the ability to move virtual machines between ESXi hosts.  I'd settle for migration cold.  However, after reading the article on migration in the basic manual Admin, it seems I have to use Virtual Center to be able to do.  Am I wrong?  And I'll take it, Virtual Center is not a free download.

  But do I really need to Virtual Center to move virtual machines between ESXi hosts?  It seems to me that I could just use VI client to do a migration of the nickname 'cold '.  Is there something wrong with the following scenario:

  1. all VM files are kept on a central NFS server.

  2. I stopped the VM on HostA.

  3. Add the virtual machine to host b inventory.

  4 remove the virtual machine from the inventory of the HostA.

  5. I turn the VMS on host b.

  Of course, this is not automatic and not stupid, but it's free so I can't complain.

  Thanks in advance for any information or advice you can give me.

  No, and that's all a 'cold' vmotion is anyway...

  Take a look at this http://communities.vmware.com/docs/DOC-9400 (ghettoQuickMigrate.sh) (free vmotion)

• Migration cold vcenter server VM to another logical data center

  My version is 5.0

  I have a vCenter with multiple logical datacenters.

  I'm under vCenter on a virtual machine on a host in a datacenter.  The SQL Server with the vCenter database is on the same host.

  I need to move the two virtual machines to a different host in another data center.

  All LUNS are accessible from both hosts.

  I'm under standard vSwitches, not distributed.   The vSwitches on each host have exact same exchanges that are put in place.

  Can I migrate successfully cold other guests off the power, remove them from the inventory, save them with a new host and power back on.

  However I'm not sure how to migrate the vCenter cold and SQL VMs.

  My first thought was to turn off the power, connect the viClient directly to the guests in question and delete them from the inventory on the current host and save them to the new host.

  What I don't know is if the vCenter database will have a problem with the location of the machine since I do change out vCenter.

  Any suggestions?

  Thank you

  Welcome to the community - you thought initial is correct since migrate is a function of vcenter but Word of warning make sure that you select Remove flexible financing inventory and not delete from the disk - remove inventory will remove form VM guests of stocks without deleting the VM disk shape.

  There will be no problem with access to the database-

• vDS to migration cold vDS

  Is there an easier way to cold migrate a VM from vDS VDS service without removing the vNIC?

  My current environment has 2 data centers physically separated with about 15 guests in each.  vCenter is configured with each data center physical with a single Datacenter/15-host Cluster and vDS defined for each.

  The current process before the cold migration is to remove the vNIC (s), and then migrate the virtual machine to the desired location.  Is there a way to better or easier to do this?  My dvPgs exactly the same labelling would solve this problem?

  For this kind of scenario, we have created the following workaround solution in our environment:

  Create an additional vDS (we called it TransferSwitch), add all the guests of all the centres of data/clusters, but without any physical connection.

  A migration process cold one cluster/datacenter to another then realized in three steps:

  1. connect the NIC of the virtual machine to the TransferSwitch

  2 cold migrate the virtual computer to the destination

  3. connect the NIC of the virtual machine to the destination vDS

  This avoids remove/re-adding NIC of the virtual machine and all the consequences (as a new device detected in the guest operating system, with a different MAC address).

  You can create the right TransferSwitch temporarily for each VM migration, but we decided to keep everything permanently.

  -Andreas

• Quick question: migration cold are still the way to go in a P2V?

  Quick question: are cold migration always the way to go during the P2V conversion on the server than SQL databases?  I am looking for a quick answer/explanation & link possible for literature... well and other assistance you can provide.  Thank you.

  The latest VMware vCenter Converter BootCD is part of the module and VMware vCenter Server 4.0 update 3. I'm not sure whether this is included/available with for example the assessment of vSphere

  André

• Migration cold with snapshots

  What is the best way to cold migrate a virtual machine with photos, if snapshots may be taken first?

  Thank you

  Hello

  (1) turn off the virtual machine. Remove the virtual machine from the inventory...

  (2) move the file to the virtual machine of the old data to the new data store store & browse the data store.

  Add 3) the virtual machine to the new data store inventory.

  (4) it will contain snapshots.

  Concerning

  Senthil Kumar D

• Issue of migration

  Hi guys;

  Looks like I'll buy a new iMac today.

  I have an iMac (27 inch, mid 2011)

  My question is this.

  Can I migrate my Info for the new mac?

  The new mac has Thunderbolt 2 entered the back whereas mine has 1 bolt of lightning (I'm assuming that it Thunderbolt 1 due to age)

  Also, a new will be accompanied by El Capitan and my current mac is running Yosemite. Is this a problem?

  Drew

  Neither should be a problem - you can also ask at the store when you buy.

  And all the apps that worked with Yosemite should also work with El Capitan - check the developer site (s) to see if you need to update.

• DMVPN spoke of issues after migration double ISR2 3925 hub to ASR-1001 X

  Hello world

  After our hub solution migration DMVPN double ISR2 3925 to ASR - 1001 X (running asr1001x - universalk9.03.12.03.S.154 - 2.S3 - std.SPA.bin) we started to have some problems with tunnels rays beat (which goes up and down) and sometimes never came.

  Running 'show dmvpn' speak it is stuck in State PNDH to our hub. To solve the problem, we run 'stop' and then 'non-stop' on the tunnel interface to actually speak that DMVPN Monte. Also runs "clear encryption session " on the shelf often solves the problem. So, it seems that the question has something to do with IPSEC.

  When the problem occurred, and then debug crypto ipsec, crypto, crypto isakmp and crypto engine socket the following can be seen on the hub:

   Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Sending NOTIFY DPD/R_U_THERE protocol 1 spi 140130067548488, message ID = 629121681 Jun 25 10:01:41 SUMMERT: ISAKMP:(46580): seq. no 0x64B2238C Jun 25 10:01:41 SUMMERT: ISAKMP:(46580): sending packet to  my_port 500 peer_port 500 (I) QM_IDLE Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Sending an IKE IPv4 Packet. Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):purging node 629121681 Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Input = IKE_MESG_FROM_TIMER, IKE_TIMER_IM_ALIVE Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE Jun 25 10:01:41 SUMMERT: ISAKMP (46580): received packet from  dport 500 sport 500 ISP1-DMVPN (I) QM_IDLE Jun 25 10:01:41 SUMMERT: ISAKMP: set new node 3442686097 to QM_IDLE Jun 25 10:01:41 SUMMERT: ISAKMP:(46580): processing HASH payload. message ID = 3442686097 Jun 25 10:01:41 SUMMERT: ISAKMP:(46580): processing NOTIFY DPD/R_U_THERE_ACK protocol 1 spi 0, message ID = 3442686097, sa = 0x7F72986867D0 Jun 25 10:01:41 SUMMERT: ISAKMP:(46580): DPD/R_U_THERE_ACK received from peer , sequence 0x64B2238C Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):deleting node 3442686097 error FALSE reason "Informational (in) state 1" Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY Jun 25 10:01:41 SUMMERT: ISAKMP:(46580):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE Jun 25 10:01:42 SUMMERT: IPSEC: delete incomplete sa: 0x7F729923A438 Jun 25 10:01:42 SUMMERT: IPSEC(send_delete_notify_kmi): not sending KEY_ENGINE_DELETE_SAS Jun 25 10:01:42 SUMMERT: ISAKMP:(46580):purging node 1111296046 Jun 25 10:01:44 SUMMERT: ISAKMP (46580): received packet from  dport 500 sport 500 ISP1-DMVPN (I) QM_IDLE Jun 25 10:01:44 SUMMERT: ISAKMP: set new node 928225319 to QM_IDLE Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing HASH payload. message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing SA payload. message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Checking IPSec proposal 1 Jun 25 10:01:44 SUMMERT: ISAKMP: transform 1, ESP_AES Jun 25 10:01:44 SUMMERT: ISAKMP: attributes in transform: Jun 25 10:01:44 SUMMERT: ISAKMP: encaps is 2 (Transport) Jun 25 10:01:44 SUMMERT: ISAKMP: SA life type in seconds Jun 25 10:01:44 SUMMERT: ISAKMP: SA life duration (basic) of 3600 Jun 25 10:01:44 SUMMERT: ISAKMP: SA life type in kilobytes Jun 25 10:01:44 SUMMERT: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 Jun 25 10:01:44 SUMMERT: ISAKMP: authenticator is HMAC-SHA Jun 25 10:01:44 SUMMERT: ISAKMP: key length is 256 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):atts are acceptable. Jun 25 10:01:44 SUMMERT: CRYPTO_SS(TUNNEL SEC): Active open, socket info: local  /255.255.255.255/0, remote  /255.255.255.255/0, prot 47, ifc Tu3300 Jun 25 10:01:44 SUMMERT: IPSEC(recalculate_mtu): reset sadb_root 7F7292E64990 mtu to 1500 Jun 25 10:01:44 SUMMERT: CRYPTO_SS(TUNNEL SEC): Sending Socket Ready message Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing NONCE payload. message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing ID payload. message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing ID payload. message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):QM Responder gets spi Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Node 928225319, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Node 928225319, Input = IKE_MESG_INTERNAL, IKE_GOT_SPI Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Old State = IKE_QM_SPI_STARVE New State = IKE_QM_IPSEC_INSTALL_AWAIT Jun 25 10:01:44 SUMMERT: IPSEC(crypto_ipsec_sa_find_ident_head): reconnecting with the same proxies and peer  Jun 25 10:01:44 SUMMERT: IPSEC(crypto_ipsec_update_ident_tunnel_decap_oce): updating profile-shared Tunnel3300 ident 7F7298B2BF80 with lookup_oce 7F7296BF5440 Jun 25 10:01:44 SUMMERT: IPSEC(create_sa): sa created, (sa) sa_dest= , sa_proto= 50, sa_spi= 0x14F40C56(351538262), sa_trans= esp-aes 256 esp-sha-hmac , sa_conn_id= 27873 sa_lifetime(k/sec)= (4608000/3600), (identity) local= :0, remote= :0, local_proxy= /255.255.255.255/47/0, remote_proxy= /255.255.255.255/47/0 Jun 25 10:01:44 SUMMERT: IPSEC(create_sa): sa created, (sa) sa_dest= , sa_proto= 50, sa_spi= 0x3B4731D7(994521559), sa_trans= esp-aes 256 esp-sha-hmac , sa_conn_id= 27874 sa_lifetime(k/sec)= (4608000/3600), (identity) local= :0, remote= :0, local_proxy= /255.255.255.255/47/0, remote_proxy= /255.255.255.255/47/0 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Received IPSec Install callback... proceeding with the negotiation Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Successfully installed IPSEC SA (SPI:0x14F40C56) on Tunnel3300 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): sending packet to  my_port 500 peer_port 500 (I) QM_IDLE Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Sending an IKE IPv4 Packet. Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Node 928225319, Input = IKE_MESG_FROM_IPSEC, IPSEC_INSTALL_DONE Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Old State = IKE_QM_IPSEC_INSTALL_AWAIT New State = IKE_QM_R_QM2 Jun 25 10:01:44 SUMMERT: ISAKMP (46580): received packet from  dport 500 sport 500 ISP1-DMVPN (I) QM_IDLE Jun 25 10:01:44 SUMMERT: ISAKMP: set new node 1979798297 to QM_IDLE Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing HASH payload. message ID = 1979798297 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): processing NOTIFY PROPOSAL_NOT_CHOSEN protocol 3 spi 351538262, message ID = 1979798297, sa = 0x7F72986867D0 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580): deleting spi 351538262 message ID = 928225319 Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):deleting node 928225319 error TRUE reason "Delete Larval" Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):peer does not do paranoid keepalives. Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Enqueued KEY_MGR_DELETE_SAS for IPSEC SA (SPI:0x3B4731D7) Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):deleting node 1979798297 error FALSE reason "Informational (in) state 1" Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY Jun 25 10:01:44 SUMMERT: ISAKMP:(46580):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE Jun 25 10:01:44 SUMMERT: IPSEC: delete incomplete sa: 0x7F729923A340 Jun 25 10:01:44 SUMMERT: IPSEC(key_engine_delete_sas): delete SA with spi 0x3B4731D7 proto 50 for  Jun 25 10:01:44 SUMMERT: IPSEC(update_current_outbound_sa): updated peer  current outbound sa to SPI 0 Jun 25 10:01:44 SUMMERT: IPSEC(send_delete_notify_kmi): not sending KEY_ENGINE_DELETE_SAS Jun 25 10:01:44 SUMMERT: CRYPTO_SS(TUNNEL SEC): Sending request for CRYPTO SS CLOSE SOCKET

   #sh pl ha qf ac fe ipsec data drop ------------------------------------------------------------------------ Drop Type Name Packets ------------------------------------------------------------------------ 3 IN_US_V4_PKT_FOUND_IPSEC_NOT_ENABLED 127672 19 IN_OCT_ANTI_REPLAY_FAIL 13346 20 IN_UNEXP_OCT_EXCEPTION 4224 33 OUT_V4_PKT_HIT_IKE_START_SP 1930 62 IN_OCT_MAC_EXCEPTION 9 #sh plat hard qfp act stat drop | e _0_ ------------------------------------------------------------------------- Global Drop Stats Packets Octets ------------------------------------------------------------------------- Disabled 1 82 IpFragErr 170536 246635169 IpTtlExceeded 4072 343853 IpsecIkeIndicate 1930 269694 IpsecInput 145256 30071488 Ipv4Acl 2251965 215240194 Ipv4Martian 6248 692010 Ipv4NoAdj 43188 7627131 Ipv4NoRoute 278 27913 Ipv4Unclassified 6 378 MplsNoRoute 790 69130 MplsUnclassified 1 60 ReassTimeout 63 10156 ServiceWireHdrErr 2684 585112

  In addition, after you run "logging dmvpn rate-limit 20' on the hub

   %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel292: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) on (Tunnel:  NBMA: )

  On the talks both the following can be seen debugging as well:

   *Jun 25 09:17:26.884: ISAKMP:(1032): sitting IDLE. Starting QM immediately (QM_IDLE ) *Jun 25 09:17:26.884: ISAKMP:(1032):beginning Quick Mode exchange, M-ID of 1599359281 *Jun 25 09:17:26.884: ISAKMP:(1032):QM Initiator gets spi *Jun 25 09:17:26.884: ISAKMP:(1032): sending packet to  my_port 500 peer_port 500 (R) QM_IDLE *Jun 25 09:17:26.884: ISAKMP:(1032):Sending an IKE IPv4 Packet. *Jun 25 09:17:26.884: ISAKMP:(1032):Node 1599359281, Input = IKE_MESG_INTERNAL, IKE_INIT_QM *Jun 25 09:17:26.884: ISAKMP:(1032):Old State = IKE_QM_READY New State = IKE_QM_I_QM1 *Jun 25 09:17:26.940: ISAKMP (1032): received packet from  dport 500 sport 500 Global (R) QM_IDLE *Jun 25 09:17:26.940: ISAKMP:(1032): processing HASH payload. message ID = 1599359281 *Jun 25 09:17:26.940: ISAKMP:(1032): processing SA payload. message ID = 1599359281 *Jun 25 09:17:26.940: ISAKMP:(1032):Checking IPSec proposal 1 *Jun 25 09:17:26.940: ISAKMP: transform 1, ESP_AES *Jun 25 09:17:26.940: ISAKMP: attributes in transform: *Jun 25 09:17:26.940: ISAKMP: encaps is 2 (Transport) *Jun 25 09:17:26.940: ISAKMP: SA life type in seconds *Jun 25 09:17:26.940: ISAKMP: SA life duration (basic) of 3600 *Jun 25 09:17:26.940: ISAKMP: SA life type in kilobytes *Jun 25 09:17:26.940: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jun 25 09:17:26.940: ISAKMP: authenticator is HMAC-SHA *Jun 25 09:17:26.940: ISAKMP: key length is 256 *Jun 25 09:17:26.940: ISAKMP:(1032):atts are acceptable. *Jun 25 09:17:26.940: IPSEC(ipsec_process_proposal): proxy identities not supported *Jun 25 09:17:26.940: ISAKMP:(1032): IPSec policy invalidated proposal with error 32 *Jun 25 09:17:26.940: ISAKMP:(1032): phase 2 SA policy not acceptable! (local  remote ) *Jun 25 09:17:26.940: ISAKMP: set new node -1745931191 to QM_IDLE *Jun 25 09:17:26.940: ISAKMP:(1032):Sending NOTIFY PROPOSAL_NOT_CHOSEN protocol 3 spi 834718720, message ID = 2549036105 *Jun 25 09:17:26.940: ISAKMP:(1032): sending packet to  my_port 500 peer_port 500 (R) QM_IDLE *Jun 25 09:17:26.940: ISAKMP:(1032):Sending an IKE IPv4 Packet. *Jun 25 09:17:26.940: ISAKMP:(1032):purging node -1745931191 *Jun 25 09:17:26.940: ISAKMP:(1032):deleting node 1599359281 error TRUE reason "QM rejected" *Jun 25 09:17:26.940: ISAKMP:(1032):Node 1599359281, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH *Jun 25 09:17:26.940: ISAKMP:(1032):Old State = IKE_QM_I_QM1 New State = IKE_QM_I_QM1 *Jun 25 09:17:34.068: ISAKMP (1032): received packet from  dport 500 sport 500 Global (R) QM_IDLE *Jun 25 09:17:34.068: ISAKMP: set new node 1021264821 to QM_IDLE *Jun 25 09:17:34.072: ISAKMP:(1032): processing HASH payload. message ID = 1021264821 *Jun 25 09:17:34.072: ISAKMP:(1032): processing NOTIFY DPD/R_U_THERE protocol 1 spi 0, message ID = 1021264821, sa = 0x32741028 *Jun 25 09:17:34.072: ISAKMP:(1032):deleting node 1021264821 error FALSE reason "Informational (in) state 1" *Jun 25 09:17:34.072: ISAKMP:(1032):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY *Jun 25 09:17:34.072: ISAKMP:(1032):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE *Jun 25 09:17:34.072: ISAKMP:(1032):DPD/R_U_THERE received from peer , sequence 0x64B2279D *Jun 25 09:17:34.072: ISAKMP: set new node 716440334 to QM_IDLE *Jun 25 09:17:34.072: ISAKMP:(1032):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1 spi 834719464, message ID = 716440334 *Jun 25 09:17:34.072: ISAKMP:(1032): seq. no 0x64B2279D *Jun 25 09:17:34.072: ISAKMP:(1032): sending packet to  my_port 500 peer_port 500 (R) QM_IDLE *Jun 25 09:17:34.072: ISAKMP:(1032):Sending an IKE IPv4 Packet. *Jun 25 09:17:34.072: ISAKMP:(1032):purging node 716440334 *Jun 25 09:17:34.072: ISAKMP:(1032):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE *Jun 25 09:17:34.072: ISAKMP:(1032):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE *Jun 25 09:17:35.356: ISAKMP:(1032):purging node 206299144

  Obviously something seems to be wrong Phase 2 not to come. But why is it going up after having erased the session encryption or close the tunnel interface and activate the interface of tunnel has spoken?

  Very weird. Also, in looking at att the hub debugging messages it seems that Cryptography is associated with evil Tu3300 tunnel interface when it is Tu2010. Normal or Bug?

  The configuration of the hub looks like this:

   crypto keyring ISP1-DMVPN vrf ISP1-DMVPN pre-shared-key address 0.0.0.0 0.0.0.0 key  crypto isakmp policy 10 encr aes authentication pre-share crypto isakmp keepalive 10 3 periodic crypto isakmp nat keepalive 10 crypto isakmp profile ISP1-DMVPN keyring ISP1-DMVPN match identity address 0.0.0.0 ISP1-DMVPN keepalive 10 retry 3 crypto ipsec transform-set AES256-MD5 esp-aes 256 esp-md5-hmac mode tunnel crypto ipsec transform-set AES256-SHA-TRANSPORT esp-aes 256 esp-sha-hmac mode transport crypto ipsec profile ISP1-DMVPN set transform-set AES256-SHA AES256-SHA-TRANSPORT set isakmp-profile ISP1-DMVPN vrf definition ISP1-DMVPN description DMVPN-Outside-ISP1 rd 65527:10 ! address-family ipv4 exit-address-family ! ! interface TenGigabitEthernet0/0/0 no ip address ! interface TenGigabitEthernet0/0/0.71 description VPN;ISP1-DMVPN;Outside;VLAN71 encapsulation dot1Q 71 vrf forwarding ISP1-DMVPN ip address  255.255.255.128 no ip proxy-arp ip access-group acl_ISP1-DMVPN_IN in ! ip route vrf ISP1-DMVPN 0.0.0.0 0.0.0.0  name ISP1;Default ip access-list extended acl_ISP1-DMVPN_IN permit icmp any any permit esp any host  permit gre any host  permit udp any host  eq isakmp permit udp any host  eq non500-isakmp deny ip any any vrf definition 2010  description CUSTA - Customer A  rd 65527:2010 route-target export 65527:2010 route-target import 65527:2010 ! address-family ipv4 exit-address-family ! ! interface Tunnel2010 description CUSTA;DMVPN;Failover-secondary vrf forwarding 2010 ip address 10.97.0.34 255.255.255.240 no ip redirects ip mtu 1380 ip nhrp map multicast dynamic ip nhrp network-id 2010 ip nhrp holdtime 120 ip nhrp server-only ip nhrp max-send 1000 every 10 ip tcp adjust-mss 1340 tunnel source TenGigabitEthernet0/0/0.71 tunnel mode gre multipoint tunnel key 2010 tunnel vrf ISP1-DMVPN tunnel protection ipsec profile ISP1-DMVPN shared router bgp 65527 ! address-family ipv4 vrf 2010 redistribute connected metric 10 redistribute static metric 15 neighbor 10.97.0.39 remote-as 65028 neighbor 10.97.0.39 description spokerouter;Tunnel1 neighbor 10.97.0.39 update-source Tunnel2010 neighbor 10.97.0.39 activate neighbor 10.97.0.39 soft-reconfiguration inbound neighbor 10.97.0.39 prefix-list EXPORT-IVPN-VRF2010 out neighbor 10.97.0.39 route-map AllVRF-LocalPref-80 in neighbor 10.97.0.39 maximum-prefix 5000 80 default-information originate exit-address-family

  Configuring spoke:

   crypto keyring DMVPN01 pre-shared-key address 0.0.0.0 0.0.0.0 key  crypto isakmp policy 10 encr aes authentication pre-share crypto isakmp invalid-spi-recovery crypto isakmp profile DMVPN01 keyring DMVPN01 match identity address 0.0.0.0 keepalive 10 retry 3 crypto ipsec transform-set AES256-SHA esp-aes 256 esp-sha-hmac mode tunnel crypto ipsec transform-set AES256-SHA-TRANSPORT esp-aes 256 esp-sha-hmac mode transport crypto ipsec profile DMVPN01 set transform-set AES256-SHA-TRANSPORT set isakmp-profile DMVPN01 vrf definition inside rd 65028:1 route-target export 65028:1 route-target import 65028:1 ! address-family ipv4 exit-address-family ! interface Tunnel1 description DMVPN to HUB vrf forwarding inside ip address 10.97.0.39 255.255.255.240 no ip redirects ip mtu 1380 ip nhrp map 10.97.0.33  ip nhrp map multicast  ip nhrp map 10.97.0.34  ip nhrp map multicast  ip nhrp network-id 1 ip nhrp holdtime 120 ip nhrp nhs 10.97.0.33 ip nhrp nhs 10.97.0.34 ip nhrp registration no-unique ip nhrp registration timeout 60 ip tcp adjust-mss 1340 tunnel source GigabitEthernet0/0 tunnel mode gre multipoint tunnel key 2010 tunnel protection ipsec profile DMVPN01 shared router bgp 65028 ! address-family ipv4 vrf inside bgp router-id 172.28.5.137 network 10.97.20.128 mask 255.255.255.128 network 10.97.21.0 mask 255.255.255.0 network 10.97.22.0 mask 255.255.255.0 network 10.97.23.0 mask 255.255.255.0 network 172.28.5.137 mask 255.255.255.255 neighbor 10.97.0.33 remote-as 65527 neighbor 10.97.0.33 description HUB1;Tunnel2010 neighbor 10.97.0.33 update-source Tunnel1 neighbor 10.97.0.33 timers 10 30 neighbor 10.97.0.33 activate neighbor 10.97.0.33 send-community both neighbor 10.97.0.33 soft-reconfiguration inbound neighbor 10.97.0.33 prefix-list IROUTE-EXPORT out neighbor 10.97.0.33 maximum-prefix 5000 80 neighbor 10.97.0.34 remote-as 65527 neighbor 10.97.0.34 description HUB2;tunnel2010 neighbor 10.97.0.34 update-source Tunnel1 neighbor 10.97.0.34 timers 10 30 neighbor 10.97.0.34 activate neighbor 10.97.0.34 send-community both neighbor 10.97.0.34 soft-reconfiguration inbound neighbor 10.97.0.34 prefix-list IROUTE-EXPORT out neighbor 10.97.0.34 route-map AllVRF-LocalPref-80 in neighbor 10.97.0.34 maximum-prefix 5000 80 exit-address-family 

  If more information is needed, please say so.

  Any help or advice would be greatly appreciated!

  Thank you!

  It is possible that you touch it--the failure of negotiations of phase 2:

  https://Tools.Cisco.com/bugsearch/bug/CSCup72039/?reffering_site=dumpcr

  [Too little detail to say with certainty:]

  M.

• Issues after migration to one macbook to another.

  I've just migrated from my macbook pro15 to a new macbook pro 13 retina.

  I migrated my files and applications anywhere in the transfer from one machine to another and now I have problems with Photoshop CC.

  I can't open Photoshop as it asks me to install the Application Cloud Creative Manager, that I previously had installed and should therefore be met.

  I tried to download it and install it, but repeatedly get an accident shortly after it starts the process.

  I tried to uninstall the existing applications and start from scratch, but they will not uninstall without the application manager. I ' v been deleted manually to see if that would help, but no joy.

  I am at a loss as to how I can get the apps on the machine.

  Any help appreciated.

  See you soon

  Chris

  If it's good for you, remove all Apps and Adobe on folders and then install again as a new Installation, it will be ideal to avoid these problems somewhat in the future. As you had migrated Apps and its support files.

  Just uninstall and reinstall will overwrite the files on an existing folder that is very well . But complete removal and re-setup is ideal.

  Good to know information about full manual removal and re-setup process,

  (1) trash Adobe apps to Applications.

  (2) trash below mentioned cases of Applications > utilities.

  
  

  • Adobe Creative Cloud
  • Adobe Application Manager
  • Adobe utility.
  • Adobe Installers.

  
  

  3) files Adobe garbage below locations.

  
  

  Files from Adobe will be present inside the Application Support folder.

  ~/Library/Application support /    [ User library ]

  /Library/Application Support /     [ Library system ]

  Then run Adobe Cleaner tool and select the option all own .

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  Then install Adobe Creative Cloud app.

• The issue of Migration

  Hi all
  
  We intend to migrate our oracle database server to the new server. We have apex 3.1.2 installed on the old server. We intend to install an Apex 4.0 on the new server.
  What is the best way to migrate the existing application to the new server? I appreciate your help.
  
  Thank you

  Hi James,

  If you do not have too many applications I could import them to the new server one by one.

  But the other approach works as well.

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  Work: http://www.click-click.at

• cold vsphere 4.1 - should migration take how long?

  Hello!

  We begin the process of upgrading our hosts and components vSphere 4.1 to 5.5.  We have to increase the RAM on the hosts and therefore need to move some virtual machines between hosts.

  Some of these virtual machines have no VM Tools installed, so they must be cold migrated.  Stop, migrate, restart, rinse and repeat.

  I'll do some tests, but my previous experience on it's a little blurry.  Let's not storage, just the virtual machine.  I remember this will only take a couple minutes to complete.

  What is your experience with this kind of cold migration how long does?

  Thanks in advance!

  G

  Why not computers vMotion virtual instead of Migration cold? vMotion requires no VMware Tools installed in the virtual machines: Machine virtual Conditions and Limitations for vMotion in vSphere Web Client

• Cold migration of MSCS cluster node clients?

  Work on the establishment of a MSCS cluster on 2 hosts.  The hosts are the ESXi 5.5 build 1892794.

  My shared disks are RDM compatibility mode physical that I have attached to a second SCSI controller in physical sharing mode.

  My cluster validation wizard is successfully completed.

  However, if I turn off the guests, everyone migrate to a different host (with FC to the RDM LUN connectivity), turn on and then run the cluster validation Wizard error e/s disk wizard reports on tests of arbitration and failover.

  I learned that when I see these mistakes I can unsubscribe the VMs, detach the storage from the host, restart the host, attached storage, re - save virtual machines, and then validation is successful.  However, it is a bit complicated and if I say lose a blade and need to put one of my guests node elsewhere, I want to do without the time and hassle.  Is this possible?

  I know vMotion is not supported with the physical bus sharing, but this ban applies to cold (power off) so migration?  Or is this an indication that I screwed up my configuration?

  Any thoughts would be great.

  Thank you

  Here's what VMware has sent:

  =======================

  -A virtual machine that has a ROW in a MSCS cluster connected in physical compatibility mode cannot be vMotioned.

  -Even if you do a cold vMotion (stop the virtual computer, then vMotion), the ROW could be detected as vmdk and you may need to remove
  She and present it back or re - enter as you mentioned.

  -Best practices recommend Vmware are that - before the migration, remove the ROW of the virtual machine, and then migrate the virtual machine. Once the
  VM was vMotion, then you can attach the RDM to the virtual machine.

  Unfortunately there is no work around on this
  scenario.

  ======================================

  So I guess the cold, you can migrate the MSCS cluster nodes but sometimes it does not work quite as well and so its best to remove the ROW before migration cold.

  Thanks to all who have posted!