Issue of recovery with Satellite L755 - 12G - blue screen at startup

Similar Questions

• Satellite P100-347: blue screen at startup - unable to boot volume

  Recently, I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, pre-installed with media center edition 2005, and now it fails to start.

  During the process of possibly starting a blue screen appears for about a second and then it shutsdown (I managed to make the words "unable to boot volume" on the basis of the blue screen).

  I tried to boot with a XP media center DVD but it gives me only a possibility of reinstalling the operating system with a cost of losing all my important data. Normally I would have picked up the system, but I don't want to lose my data.

  Can I do other than take it to a technician?

  Hello

  Well, for the most part the BSOD appears due to hardware problem or serious software.
  In your case, the software problem is possible

  Unfortunately, I think that the new installation of the OS is the best way to get the laptop works properly.
  Now, you want to know how to record data and the files well, I think that you should remove the laptop HARD drive and must try to connect the 2.5 HDD via external USB controller to another computer. Then you can save the files to the other HARD disk

  I think, now, you know that regular backups are important and necessary!

• Issue of recovery with Satellite A85-S1072

  I'm trying to recover my A85-S1072. I put the disk in it and it started working and reaches about 30 percent on the toshiba restore tool 7.5.1 and then he says:

  Output A:\GHOST. ERR (giving the option Yes or no)
  By clicking on any send to a black screen with a blinking "_" and clicking Yes brings up a screen cannot open 'GHOST. ERR - insert disk '.

  is there a reason its not open this file correctly? I tried to clean the disc and there no scratches or marks. I also opened reinstall drive on my other computer and it looked however I was unable to understand all that I could do that would not occur to ruining me the recovery disc.
  Any suggestions?

  Hello!
  You have probably used a before Norton Ghost utility in this laptop, and now things don't get any better between your operating system and the setings of Ghost in this laptop.
  If this is true, you must use the ghost disk that will allow you to run again so that you can cancel or reset the settings it is.
  Hope this will help

• Satellite Pro A60: Blue screen - ATI2DVAG display driver. DLL in endless loop

  Hello
  Laptop is a Toshiba Satellite Pro A60 with ATI Mobility Radeon 7000 IGP video card, running Windows XP Professional and SP 2.
  During the start in most cases systems hang up with blue screen.

  I installed the latest drivers from http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK (Version dated 6.14.10.6430 Date 09/03/2004) but the problem continues. After second - last third - it reboot now works.
  The blue screen says (translated from German):
  "Component that probably caused the problem: ati2dvag.dll; the device driver is in an infinite loop; Subsequently the unit does not work, or the device driver is not program the equipment in the right way. STOP 0X000000EA. A dump was created.

  Please HELP - THANKS in advance!
  Best regards
  Frank

  Hello

  I studied a bit on the Toshiba site and found this interesting paper Toshiba on the error message Satellite A60 and blue screen on startup.
  http://support.toshiba-tro.de/KB0/TSB5300X7000MR01.htm

  This document describes how to upgrade the BIOS. The update of the BIOS should help solve this problem. Take a peek inside.
  Please post if you have solved the problem

• The dreaded blue screen on startup with Windows XP

  Get the dreaded blue screen at startup. Use Windows XP and my PC of becomes as much as the screen connection, but when I select my login name, that the blue screen appears. If I choose one of the other names the process gets a little further, but the blue screen then appears. I can login in safe mode and that you ran some diagnostic tests, but the problem persists.

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  If would know more about your system and that the Blue Screen of Death (BSOD said):

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  Your system seems to start OK and then crash or didn't he start not at all?

  If your system works fine, what do you think might have changed since the last time it worked correctly?

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:
  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg
  Send for the nose and the Red arrows (3 to 4 lines total).
  Send all * line STOP message since there are clues in the 4 parameters.
  If there is a name of the file listed in the STOP message, don't forget to include this information too.

• Satellite L300D c000021a (PSLC8E) blue screen on startup after win7 64 bit

  Hello

  The error code on a blue screen after startup (after loading win7 logo) is:
  STOP: c000021a {fatal system error}

  Installed Win7 Ultimate x 64.

  My bios version is 1.80

  Someone has any idea how to solve this problem?

  Thanks for help

  Have you tried to install the original preinstalled Toshiba system using the recovery disk to check if the same BSOD error appear?
  If this is not the case, do.
  This BSOD can be linked either hardware or software problem and good work and pre-configured system could clarify the situation.

• My Vista system crashes, blue screen on startup: irql_not_less_or_equal STOP: 0x0000000A (0 x 0, 00000002 00000001, 0x81AE8590)

  My Vista system was crushed, tried everything, but finally resorted to a recovery of the original factory image off the coast of the hard drive Partition. Everything seemed to go smooth but now I get a blue screen at startup: irql_not_less_or_equal STOP: 0x0000000A (0 x 0, 00000002 00000001, 0x81AE8590)

  Odd part is the system has two RAM slots, we have a 2 GB key and another has a 1 GB. Could not get the machine to start with two sticks in. Will start with a stick in each thin slot. Will not start no matter how they are installed if you are using the two RAM slots. Ran SFC/scannow. He found errors, that it cannot correct. How can I fix these errors?

  CBS log is large enough: what details should I post it to help you troubleshoot?

  Note: Were able to update the system, including the installation of updates Windows 128 and seems to be updated throughout the SP-2. I really don't want to run another recovery if possible.

  Thank you!

  Hello

  Perhaps you have different brands of RAM in your computer, and so it would not start with the two inserted Rams. Do a check for your specific PC memory that tells you what products work with your system.

  Follow the information in this article.
  Know what type of RAM you need

  In addition, updated BIOS.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If scan SFC did not fix the issue, I would say that you follow the steps in this article to fix it.

  http://support.Microsoft.com/kb/929833

  Regarding blue screen errors, follow the steps in this article that applies also for Vista.

  Resolve stop (blue screen) error in Windows 7

• Blue screen on startup, the system restore / repair did not work?

  Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

  I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

  Will be saved my files / is there a way to fix this? Thank you!

  Hello

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue screen on startup check drive c for errors

  Original title: I havea blue screen on startup saying mistakes c disk check was cancelled I want back this sysem also affected and another restoration things helppppppp

  I have a blue to start saying the c disk check to find errors in windows xp iwant to resume what he as affected system restore helppppppppp ted

  Hi edwardcliffe,

  ·         Have you made changes on the computer?

  ·         Are you able to boot to the desktop?

  ·         What is the full error message?

  ·         What do you mean when you say "I want to take this also affected the system restore and other things?

  If you are not able to boot to the desktop, follow the steps.

  You will need an XP installation CD to try to solve this problem.  If you do not, try to borrow one just to run this fix.

  (1) configure the computer to boot from the CD if it is not already configured in this way. You may need to enter the BIOS to configure the computer to boot from the CD.

  (2) set the boot order on:

  Floppy (if present)

  CD/DVD-ROM

  Hard drive

  RECORDING and EXIT

  (3) to start the computer with the XP installation CD in the drive. When you see the prompt «Press any key to boot from CD...» ", do and start the process to boot on CD.

  (4) when the Recovery Console option is available (press R to start the Recovery Console), do it. You may be asked to what Windows installation to enter, what kind of cases the number of the Windows installation you want to work (usually 1).

  (5) when you are prompted, enter the password for the Windows installation. If you have not set up a password just press ENTER

  (6) at the command prompt, type:

  chkdsk /r  (there is a space before the /) Press ENTER.

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  If you are able to boot to the desktop, follow the steps in the article.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654/en-us

• Satellite A85-s107 - white screen at startup by using the power of the battery

  Satellite A85-s107 white screen at startup by using the power of the battery

  When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
  After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

  There is no problem when I start upward when it is connected to an electrical outlet.
  Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

  Any suggestions?

  PS:

  also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

  Don t need to recharge the battery if the AC adapter is plugged ;)
  Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
  In this case, only the replacement could help and it could be a costly affair

• I can't open windows update in Safe Mode. Also blue screen at startup ('a forward driver a buffer based on the battery'

  My laptop keeps hitting a blue screen at startup ('a forward driver a buffer based on the stack'), I can only start it in safe mode. I want to try windows updates to see if this will help, but whenever I click on the button to update windows on the start menu, nothing happens. I tried searching for the program to see if I can open it another way, but can't find it. If I click on windows update and then nothing happened. I have windows vista home.

  original title: I can't open windows update

  Hey ElizabethSlater,

  Try to run a full scan with the Microsoft Safety Scanner to make sure that nothing is found.

  Try also to install the latest drivers from your computer manufacturer's website. If you have difficulty to locate the website of your computer manufacturer or the drivers on their page, please provide your computer brand and model in your next reply. If you have built your computer you need visit the site of the manufacturer of each piece of hardware to get the latest driver.

  Once the drivers have been installed, try to restart your computer, and then test to see if the same problem occurs.

  Hope that helps.

• Flash blue screen at startup

  Hi I just got my area51, and 1 thing I noticed that whenever I start it it has blue screen flash of 0.5 dry completely (no) - then bios - windows login - etc.

  I used my old monitor and it did not have this blue screen at startup thing so Im wondering if its normal.

  It is most likely part of the screen.
  Seems to me that the display in sync with the computer screen.

• Satellite P205-S6337 - blue screen and the black screen with the display driver

  Hello
  It is my first time here, so let me know if I did something wrong in the post or something of the sort.

  Info:
  Toshiba Satellite P205-S6337
  Windows OS: Win XP Pro SP3 x 86 (x 32)
  BIOS version: 1.40
  RAM: 2 GB
  CPU: Intel Core2 T5300-1.73 GHz, 1.73 GHz (Dual Core)

  At the beginning I was watching a video on my laptop with Media Player Classic, I made an update of windows, after I did the update and rebooted my computer I tried to re - open the video with Media Player Classic, then once I did it kept freezing, then gives me a BSOD (Blue Screen Of Death) saying :
  'igxprd3 '.
  Beginning physical memory dump
  memory dump complete physics. »

  So I kept getting that whenever I tried to watch a movie, so I thought it was due to the update of windows, because it is is not the first time that the updates on their part messed up everything. So I reformatted and once he was done after I install all the driver I want to restart my computer, once Windows is started almost entirely the screen begins to bog down then finally go completely black, the computer seems to work very well once he does, but just no screen, so I went in SafeMode (F8) and would be either disable or uninstall the video After that it would be fine, just that it does not use the video card and all current graphic stuff are bogged down and looks bad and I installed versions older and more recent video card and it always does.

  Since I'm more savy with desktop and never loved laptop a lot, but what I've tried and what not it just seems that the video card is out. I even tried it blow and ensuring that everything is in place, but I hope I'm wrong and he is not out, if so, is there a way to put a new or add another external any?

  The only thing I could think about maybe trying to update the BIOS, but I never had no problem BIOS with any thing with that I'm not kidding, and never a update BIOS since Ive never liked to play with her.

  Hello

  In General, change the graphics card is not possible because the graphics card is attached to the motherboard. In this case the entire motherboard must be replaced and an authorized service provider can ask for help.

  A point would be interesting: you can install Windows Toshiba Recovery disk? I ask this question because it would be interesting to know what is happening with the factory settings. And you can determine if this hardware or software problem.

• Recovery for Satellite L755 - 17Q

  First of all, I want to say that I am completely useless with computers.

  I have used the product recovery CD, followed all the steps, it took like 30 minutes. And then he did. After that it's over, he had a number of problems that have emerged:

  Windows is not genuine?
  Card network finds no internets? Need to install a driver?
  Screen resolution does not have the correct option.
  It is a strange version of windows 7, the bits where windows is rights are all color and are not translucent. - But I don't know if this has to do with 32-bit and 64-bit, whatever they may be.
  ^ I realized that I now have 32 bit downloaded on this computer, when it is actually a 64-bit.

  I posted on the forums US and realize that I used the wrong CD, the CD I used was a cover for a X L500-19.

  Not sure if I use the right disk, as I have 2 laptops from toshiba.
  On the disc, it says GMR410014EN0
  Windows 7 Home Premium 32 bit
  CD9D125073
  Support for these products provided by Toshiba Europe GmbH

  A little more information... I don't know if I created this "recovery means" just noticed the 2nd time, that have an effect on the result?

  > Just a little more information... I don't know if I created this "means of recovery.
  What to say after reading this?
  So let's ' s be clear now: according to the specifications of the laptop your Satellite L755 - 17Q shipped with preinstalled WIN7 64-BIT HOME PREMIUM and without recovery disk. Recovery disk must be created by the owner of the laptop. If you n t have it and you want to install the original image of recovery for L755 - 17Q you must order on https://backupmedia.toshiba.eu/landing.aspx

  If you have laptop model why discuss this topic on the American forum? European models don t have nothing to do with the American models, the U.S. or American support.

  What do you do now? Be clear with your answer and we'll try to help.

• How to recover data from recovery for Satellite L755-169?

  Hello

  I just got my Satellite L755-169 and I lost my recovery of data by mistake!
  How can I recover?

  You can't recover.
  If you didn t create restore DVD, you must order a new one on https://backupmedia.toshiba.eu/landing.aspx