Error. EXC_BAD_ACCESS in mac when using PP

Similar Questions

• G26 error - touchpad is disabled when using

  I recently received a notebook G26. The key sometimes disabled when using with the charcoal fire on and a dispay showing that the touchpad is disabled. Unlike some other modules, there is no button on the top of the touchpad that allow me to activate the touchpad. My questions are:

  (1) why the touchpad is disabled? A I hit a wrong key combination?

  (2) how to enable non-stop power?

  Thank you very much.

  BTW, does anyone know how to loosen the buttons on the touch pad, they are really difficult to click.

  The yellow light is the touchpad switch itself. Press the light twice to activate the lighting which allows you to use the touchpad again. You could hit during use. Not a good design for the laptop.

  There is no way to loosen the touchpad button...

• Photos are stored on my Mac when using iCloud

  When you use iCloud for photos, the photos are saved on my Mac, or simply in iCloud? And say I take a picture on my iPhone of store on my phone or does go straight to the cloud? My questions because I'm trying to save space on my devices and images seem to take a lot of space.

  Photos imported in a Photo as Photos or iPhoto app are stored on the Mac

  The library of iCloud is a synchronization mechanism which keeps a mirror image of the contents of the devices - in other words, when you delete something from the iPhone - it will be deleted the rate so

  If you are looking for options for additional storage, you may want to Google Photos or up there

• conversion of the error of date / time when using easy excel reports

  I export a 2D array to an excel file using Excel reports easy vi. I have no problem with that. My data has a number of areas with different formats (text and date/time). My problem is the following:

  * some (in other words, not all data is in the same worksheet) the veiled values of date/time to mm/dd/yyyy format whereas they should be in mm/dd/yyyy (is the excel format it is y in!). Essentially, I have 30/09/2008 (September 30, 2008) in a cell. After ticks on Oct. 1, it will display the date as, 01/10/2008. Excel thinks that this date is in the format dd/mm/yyyy.

  This is a known error in earlier versions of Excel (2002), in particular when you convert a .csv, .xls file. The solution, it was not to add "Local: = True ' at the end of the vba command string (see here: MS Knowledge Base). Here, in LabView I'm not sure how to proceed.

  I tried to change the format of the column in question to the 'text' by calling an Excel Macro in LabView, but do you think I can find the vba command to do? No, not so much.

  LabView saves the Excel file in 97-2003 format (I use MSOffice 2007) and I wonder if the version they are using does not consider the time correction, as described in the knowledge base (or if it applies).

  Any suggestions, I'd love to hear from you.

  Kind regards

  David.

  Hi LaRisa,.

  I was able to find the cell Format Excel set vi and successfully change the format of the value of the cell. It wasn't until I had found the vi that I realized that I've been down this road before. Change the format after the table has been created does not change values dd and mm switching that has already occurred. However, if I did before I "created the table" (or vi Excel table) and set the format to be '@' then it displays the string like 'Text' in the Excel file. That's nice. I can control what cell, row, or column to format now. If I want to be in a date format then I must apply the Format of cell vi after the easy Excel table vi.

  It sounds like a stupid race around me...

• How to remove error 59, which occurred when using email using Smtp Client .VI in Labview 2013.

  Hi, I am trying to run email using Smtp Client .VI in examples of Labview 2013, but it gives error 59.le please can anyone suggest how to remove the error. The printscreen is attached below.

  My apologies, I just tried myself, the port number, you need is port 587 with TLS.

• I get the following error in Outlook Express when using SSL

  "You are connected to the server using a security certificate that could not be verified."

  The certificate CN name does not match the passed value.

  You want to continue using this server? »

  Y/N

  If I say 'Yes', everything works fine, I can receive and send e-mails.
  I use windows XP with Outlook Express 6 (6.00.2900.5512).

  I have an e-mail address that ends with @yahoo.ie
  Incoming mail server is set to pop.mail.yahoo.ie and smtp.mail.yahoo.ie free
  SSL is the required value for 465 leaving and entering 995.

  What could be the problem and the solution?

  Kind regards
  Kiran.

  Just a minor correction.  To use Internet Explorer or control panel | Internet options.  He can't go to tools | Internet in OE options.

  Steve

• Help: Error in calendar portal when using wwctx_api.get_user

  Hello
  
  I am trying to create a calendar based on data from the table and the results should be specific to the user of the connected portal. So I created the following query, but it does not filter the data based on the logged in user. I checked and there is no problems of data side.
  
  Select
  a.EVENT_START_DT the_date,
  a.EVENT_NAME the_name,
  the_name_link (),
  the_date_link null,
  the_target null,
  the_intermedia null
  of TBL_EVENTS one
  where a.Event_Status = 0
  and a.event_personal = 1
  and a.event_recorded_by = (select entryid FROM ods. CT_UID where upper (ATTRVALUE) = upper (wwctx_api.get_user))
  a.event_id desc order
  
  
  Omitting above I also tried otherwise bind variable and passing then using the the page parameter (by selecting the USER_NAME system variables) of the variable binding
  
  Select the_date a.EVENT_START_DT,
  a.EVENT_NAME the_name,
  the_name_link (),
  the_date_link null,
  the_target null,
  the_intermedia null
  of TBL_EVENTS one
  where a.Event_Status = 0
  and a.event_personal = 1
  and a.event_recorded_by = (select entryid FROM ods. CT_UID where upper (ATTRVALUE) = upper (:username))
  a.event_id desc order
  
  However it still doesn't work.
  
  Can someone please give me a suggestion or a way to solve this problem.
  
  Any help much appriciated.
  
  Thank you
  Ganesh

  It seems that the CCMPORTAL has NO privileges EXECUTE on WWCTX_API, as you pointed out earlier, it seems that it does.
  You can test it using in any request in some portal report simply what follows.
  SELECT "UserId" OF double wwctx_api.get_user

  You can also confirm that the problem is with this function using any user specific portal instead of the statement (SELECT portal.wwctx_api.get_user FROM) dual. The query should work.

  -To fix, grant once again, explicitly EXECUTE privileges ON wwctx_api to CCMPORTAL
  GRANT EXECUTE ON wwctx_api to CCMPORTAL

  AMN

• How to determine what registry errors to remove safely when using a registry cleaner

  I installed a recommended by Microsoft free registry cleaner, it gives me a list of the elements in the registry. but more I don't know if I should remove it or not.  There is more obvious deleted programs I deleted, but how do I know what to look for in other items, such as empty registry records, etc..

  the simple answer is NONE.

  All the "" registry cleaners are designed to produce numbers enough - and the real value of the changes is at best questionable.

  Most of the registry cleaners will cause problems with the system sooner or later (usually earlier) and should be avoided at all costs.

  There is no such thing as a "good registry cleaner except the knowledge and experience of your own system.

• Error msvcp90.dll missing when using Photoshop element 13 after installation

  Original title: Missing msvcp90.dll

  I have windows 7 Home premium. I tried to install photoshop elements 13. He says that the installation is successful. I try to start the program, and he says: ' cannot start because MSVCP90.dll is missing on your computer. " Try to re install the program to fix this problem. "I've lost track of how many times I did it. I installed the C++ 2008 service pack 1 redistributable security update because he was supposed to have the .dll file - no go.  I updated my scan of malware and virus woindows done also. How can I get this operational programme? Thank you

  Hello B.cobb,

  Thank you for your response.

  Looks like there are corruptions of important system files. Logs show a number of .dll file missing or corrupt.

  Reset the default Windows Update components.

  Also reset Windows Update components repair several DLLs and other important system files. Reset Windows update ventilation includes reset services required for updates Windows and Winsock, reset the proxy connection, if any, the queue of BITS of compensation and installing the latest Windows Update Agent.

  Run the troubleshooter automated in the link below to reset Windows update default components, if the troubleshooter does not solve the problem please follow the manual steps in the article below to reset Windows Update components manually.

  How to reset Windows update components?

  http://support.Microsoft.com/kb/971058/en-us

  After resetting correctly update Windows components check running SFC scan once more and then check with the question.

• How to reduce the volume of alerts in FF when using webmail without lowering the system volume (Mac)?

  I use Mac OS 10.6.8.
  When I access my webmail via Firefox, I get a Twitter hard whenever I have send or receive a new email.
  I contacted my ISP (Optimum) and they said tell Firefox to my computer to make the sound. They say that they have no control over it.
  I tried to reduce the volume of alerts in my system prefs, but it has not affected the volume of FF.

  How reduce or disable volume in FF when using webmail without lowering system volume?

  Thank you!!! The 'sound' button off in their preferences. Fixed. (It was so freakin ' fort!)

  I, in turn, chatted with Service to customer of Optimum and tells them that they must tell their supervisor to better educate their own service to the customer, instead of passing the ball. We'll see.

  Let contributors Mozilla smart to not return the ball.

• HP photosmart 6510: error on hp photosmart 6510 showing-95 when using scan to email

  My photosmart hp 6510 displays error - 95 when using scan to email. Help!

  Hello @twinec, greetings!

  Thank you for joining the Forums of HP Support! I came across the question you posted, and I want to help you with the best of my knowledge.

  You can try a manual DNS address assignment to fix most of the analysis of the questions by e-mail. Try the steps mentioned below and check:

  • Get the IP address of the printer, you can touch the 'Wireless' icon on the Control Panel printer to get the IP address.
  • Type the IP address in your web browser to get the EWS page on your computer printer.
  • Go to the 'Network' tab - click on "wireless (802.11), and then click «network address (IPv4)»»
  • Click on the radio button that says 'Manual of the DNS server' and under manual type favorite 8.8.8.8 and manual replacement enter 8.8.4.4 (it is Google's DNS server address)
  • Save the settings. Restart your modem, router and printer.

  Let me know how it goes! Good luck

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• I can't see my iPHone on my mac pro when using Airdrop book, even though Airdrop is on both devices. Any suggestions?

  I can't see my iPHone on my mac pro when using Airdrop book, even though Airdrop is on both devices. Any suggestions?

  I assume that the Air Drop is enabled in the iPhone and that your devices are regarded as Favorites?

• Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  I tried to plug it into my mac to transfer files locally but will not be displayed in the finder or disk utility. Anyone know why?

  MacBook Pro (2015 retina) OS X 10.11.2 El Capitan

  Have you shut down / turning your Mac off... power off the USB drive... Connect the drive to the Mac... start up the Mac... then, turn on the USB drive?

  If no help, there are a number of posts to the thread in the forum El Capitan of support from users who have problems on their Mac USB.  You can post there to see if anyone has the answers.

  OS X El Capitan

• Receive the 25 (Null) error when using Flightsimulator FSX

  Receive the 25 (Null) error when using Flightsimulator FSX

  Hello

  Try to open the it to start - all programs - Games - Games Explorer, and then clicking the icon FSX.

  A disk error of 25 means that the program cannot read your disk reading.  Either the disc is scratch, dirty or defective.  If you need another drive, or you can try it on another computer. The message of Visual elements of Vista is not serious.  Vista will automatically your screen to a basic compatible mode when the application is launched.  However, it seems that your game is a failure due to the disk error and not the Vista display problem. Try to clean the disc and see if that helps.

  Last resort, it seems you'd have to do a complete uninstall and reinstall FSX.

  Cheers!

• Address MAC WUMC710 problems when using MAC filtering

  I recently bought the point WUMC710-HQ AC wireless to connect to my router EA6500.  Generally, the WUMC710 seems to work.  I was able to connect to the router wirelessly on the 5 GHz band and flow EA6500 a NetFlix video with no problems.

  However, there is a major problem that comes makes no logical sense for me:

  When I turn on the wireless MAC address filtering of the EA6500, the WUMC710 does not connect to the EA6500router.

  Yet, I 8 eight other wireless devices on my network which connect very well to the EA6500 when the MAC address filtering is enabled.  Thus, the question seems to outright to WUMC710.

  The address printed on the product shipment to the ends of the box with numbers XX:1 d.

  This address matches the address printed at the bottom of the WUMC710 MAC. (normal)

  My EA6500 router recognizes this MAC address as the correct MAC associated with the WUMC710 (when MAC filtering is enabled).  But as soon as the MAC filtering is turned on, the WUMC710 does not recover to the router. (I checked the MAC address, that I walked into the filter at least a dozen times, and she entered correct - but all my other wireless devices connect OK).

  This is a point that seems strange on the MAC address associated to the WUMC710:

  When I am able to connect to the WUMC710, State--> tab Device illustrated the right address MAC I use to filter.  But when I check the status--> network wireless tab, it displays the MAC address wireless like: XX:1E.

  So, now, I try to get into this 'new' MAC address in the MAC of the router EA6500 filter just to see if it will work with this MAC address "without papers" of the wireless device.  At first, it seems to work.  The WUMC710 of blue light will come on indicating that a wireless connection has been established with the router.  BUT nowhere in the web interface of EA6500 says that the WUMC710 has a DHCP connection with the router.  And, if I connect my laptop directly to one of the WUMC710 Ethernet ports, there is no connection to the Internet via the router (as long as the MAC filtering is enabled).

  I did Factory Reset a few times now and no difference.

  Firmware is the factory default - it is there no update of the firmware available, yet.

  I spent several hours trying to understand what is happening with this device and go round and round in circles in trying different things.  I can only conclude WUMC710-AC is defective, or requires a firmware fix - but none are available.

  Am I missing something here?  Or Cisco does suggest a fix for the firmware for the WUMC710-AC?

  (I don't really like to run my network wireless MAC address filtering active wireless.)

  Kind regards

  Jeff

  Cisco-Linksys 2 support with me today confirmed what I thought it was a possible firmware bug, is actually undocumented features of the WUMC710, by design.  And they agreed that they will update the documentation for WUMC710 to take account of these features and system requirements.

  Just like a reference to new users of the WUMC710 AC wireless bridge, I will summarize here the requirements for WUMC710 wireless bridge to work properly with the router, Cisco-Linksys AC6500 Wireless, when MAC filtering is enabled.  If all goes well, this information will save some other people the many hours I spent to dig through the documentation and the FAQ to try to understand what it takes to connect successfully devices behind the bridge of WUMC710 to the AC6500 router - when the MAC address filtering is enabled:

  The following MAC address must be entered in the AC6500 router table filtering of MAC addresses to connect devices behind the bridge WUMC710 wireless to the Internet:

  1. The MAC address of the bridge wireless WUMC710 wireless.
  2. The address MAC LAN of the WUMC710 bridge.
  3. Addresses MAC LAN of each LAN device connected to the LAN Ports of the WUMC710 bridge.

  That in a few words.

  With this information, devices behind the WUMC710 of Internet connection (with the active MAC filtering) is a breeze.