HP xw8400: HP xw8400: black screen after you add the Bios password

Similar Questions

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

• Black screen after flashing to latest BIOS

  Nothing but black screen after flashing the latest bios (fan, leds work)...

  I can do, or that of new bios/motherboard can help? (I tried to rest the battery, press F8...) Thanks in advance

  I presume that the BIOS is doomed. What you need is a professional help with this then contact the nearest service provider and ask for help.

  By the way: check this forum using the advanced search option. In the past, I have seen several interesting discussions on BIOS recovery. I m quite skeptical on this subject but maybe you will be lucky and find the solution.

• Vista Home Premium, black screen after my login and my password entry

  Hi all

  A month ago I bought a new Dell Inspiron 15 comes pre-installed with Vista Home Premium. Like many others I am now a problem with a "black screen" that hang up the machine after my login and my password. "

  When I start the machine it seems to load normally I do it at the login screen, I select my account (admin) and enter my password. The windows logo appears, and then a status bar starts indicating that the OS is laoding. Shortly after that I get a black screen on (which means that the display is on but list black). I tried to start safe mode, but I get the black screen it so.

  Like others the machine was working great until this point. I was using AVG Free edition and I am always very careful on viruses.

  Can someone help me?

  Thank you

  Travis

  Kindly stop posting the same question.

  Questions are answered as soon as possible.

  http://support.Dell.com/

  As it is only a monthe old, contact Dell Support as soon as POSSIBLE.

  It is under warranty, for all hardware and software problems.

  Report, in case of future problems.

  See you soon. Mick Murphy - Microsoft partner

• Pavilion Mini 110: Mini 110 suddenly invite you for the BIOS password after hard drive failure

  After mini disk failure hard full sat for a long time. So, I'm going to replace hard drive today and it is stuck on the screen of the BIOS password! After that 3 wrong attempts it gives an error CNU9283Y90

  I tried to unplug the CMOS battery, wait awhile, and then tie... no go!

  Can anyone help!

  TIFF

  TIFF.

  Enter e9lo7ufio1

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

• Start the computer to a black screen after you uninstall a game.

  Original title: cannot start the operating system.

  OK I installed this game, so he has not ran smoothly and I uninstalled it. When it was above him asked if I wanted to restart the pc. I did and when I restarted it loaded the 1st screen and it became all black. so I decided that I restart again but same thing happened on n, I indeed that this stay for awhile on a black screen, thinking it will take some time to load up, but no, I put the windows CD boot in and pressed F12on starts from the CD-ROM, the CD-ROM began checking for hadrware and other things , but in the moment, it says install from the screen went blue with white letters saying error. He says can be caused by the virus, malware or any newly installed software. I rebooted and now I'm under certain diagnoses by symptoms - came with my dell pc. so the symptom I am scanning is "can not boot the OS" no results to present but can someone help me? or tell me hor run in safe mode or anything like that? THX

  Hi VladKrem,

  You receive the rattling of the computer?

  I recommend you perform the upgrade on Windows XP site & check if it helps.

  How to perform an upgrade on the spot (reinstallation) of Windows XP

  Hope the helps of information.
  Please post back and we do know.

• White/black screen after you run check disk error in Windows Vista.

  I ran a check of the disk error on my lenovo W700ds (Windows Vista) yesterday evening. When I logged into the machine the screen became black and white. I was able to start the Task Manager, and he showed no application running and less than a dozen processes running in the background (which is unusual). I was able to login using safe mode but may not know how to get rid of white screen black and restore anything that could have been smeared in the disc.

  Thank you

  Hello

  Method 1
  I suggest you boot the computer last known good configuration and check if the problem persists.

  Using the last good known Configuration
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2
  As you're able to boot in safe mode, I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• Black screen after restart of the Bootcamp Assistant

  Hello

  I understand that 10 Windows is not supported with the MBP Late 2011 officially by Apple, I have it working earlier today and had no problems at all. I tried to add another partition for windows side so that I would be able to install Deep Freeze on Windows have a clean install of Windows every time that I boot in there and have all my programs and files on what would have been called "Local D.

  I deleted the Windows partition and I deleted the first player who had only 200 MB normally created from windows which I believe that holds the MBR for the old Windows Installer install. I tried to create 2 different partitions in disk utility and that the load bootcamp. He said well obviously not, because the reader must be around to do this, I did the road together again, put my Windows 10 disc in and let bootcamp.

  I wanted the reader to have 51 GB of bootcamp, that I would use 300 GB for the 'Local D' drive and the rest of the SSD 1 TB drive, I got OS X El Capitan. If at this point, I have X amount of GB to OS X and 51 GB will be used so that the wizard has done for me, once the wizard bootcamp is made, it will restart OS X and brings me to a gray screen. Normally, it's just going to continue in the installation of Windows, but it takes me to a black screen and does nothing else. Is this by far where can I fix? I even tried simply to launch the installation of Windows Installer directly from the drive itself without going through installation of bootcamp by holding ALT and selecting the drive and he finally took to the installation without any problem and now it goes to a black screen and does not change even.

  And for those wondering, no I do not get a flashing cursor in the upper left corner of my screen. Its completely black.

  PerfectStory wrote:

  I deleted the Windows partition and I deleted the first player who had only 200 MB normally created from windows which I believe that holds the MBR for the old Windows Installer install.

  You have deleted the EFI Partition from Mac. Not a very good idea. She does not hold the MBR. Your Mac uses a hybrid MBR. The MBR and the boot for Windows Manager are two separate entities.

  I tried to create 2 different partitions in disk utility and that the load bootcamp. He said well obviously not, because the reader must be around to do this, I did the road together again, put my Windows 10 disc in and let bootcamp.

  Disk utility is now considered an invalid drive due to a missing EFI partition. How did you again the reader "XV"? If you start from W10 in the optical drive, it is no Bootcamp involved more.

  I wanted the reader to have 51 GB of bootcamp, that I would use 300 GB for the 'Local D' drive and the rest of the SSD 1 TB drive, I got OS X El Capitan. If at this point, I have X amount of GB to OS X and 51 GB will be used so that the wizard has done for me, once the wizard bootcamp is made, it will restart OS X and brings me to a gray screen. Normally, it's just going to continue in the installation of Windows, but it takes me to a black screen and does nothing else. Is this by far where can I fix? I even tried simply to launch the installation of Windows Installer directly from the drive itself without going through installation of bootcamp by holding ALT and selecting the drive and he finally took to the installation without any problem and now it goes to a black screen and does not change even.

  And for those wondering, no I do not get a flashing cursor in the upper left corner of my screen. Its completely black.

  Please after the release of the following Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• HP Jet 13: could not get the usable screen after you enter the password when you restart

  After reboot I get the standard wallpaper (like the rings of Saturn), hour, day, week, month, and day, wifi bars and battery.  After the press, I have the icon pushing, my name, email and password.  By entering the password I get the points surrounding white and WELCOME, then by default in the screen with only sûr white pointer visiible.

  That's all new laptop from Amazon and seemed to work well until I have intalled the Office 365 online.  Then I started to get warnings from McAfee on bad files 'try to start', then the blank screen even during reboot.

  Please let me how to restore my system or to whom to return it.

  Thank you

  The model / sn numbers are tiny, but can be: model 13-c010nr sn 5CD50311MZ

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K

• Black screen after logging into the domain account

  OK, it's making me nutty and I don't know what to do.

  Configuration: SB Server 2008 running domain controller.  4 client machines connected, 2 XP, 2 running Vista Ultimate SP1.  XP machines work fine (of course).  Vista machines are in the tank.
  Two Vista machines are about 2 weeks with the only changes to the installation of the factory Office, Norton 360 and printer drivers.  Both machines exhibit the same symptoms at the same time:
  (1) after the restart, each machine running Vista for 10 minutes exactly, saying "Please wait...". "before the screen"press Control-Alt-Delete.  Safe Mode boot normally.  Examine the event log, I see entries on running a startup script of some kind that took 600 seconds (10 minutes).  This of course comes from the domain controller.  What is this and how do I get rid of him?
  (2) after finally journaling, tries to connect the domain account ("domain\username") result in a "Welcome" screen... ', followed by a black screen with a mouse cursor which is mobile.  It is a permanent condition.  I let the machine sit overnight and nothing changes.  I get an occasional popup on the black screen of Norton saying it runs background tasks and that's all, so I know the machines are running.  Pressing Ctrl-alt-delete is * not * bring up the Security screen.  It doesn't do anything.
  Note that connect to a * local * account ("machinename\name") works very well.  I have a desktop, icons, everything.  I even connected locally and made a "change user" to a domain account, and now the machine is stuck again to a black screen with mobile mouse.
  Both machines have worked very well for two weeks.  When I reboot safe mode and remove the computer domain, everything works well, probably because I'm just connect to a local account again.
  I did * no. * change to group policy.  The server works with all settings by default wrt updates, etc.  I did not have any mods system to customers other than to join them to the domain.
  I searched online, and I see other people have this problem, but I can't find a definitive solution.  I tried to restart by using the last known good configuration, but I think that the system is of the opinion that the last logon was successful, which is not good.  To return to the last restore Point is not good.  Both machines has stagnated at the same time, which implies a problem across the field.
  Please don't tell me that I have to spend $200 and one day online with technical support to get an answer to this.
  Thanks in advance for any help you can provide.
  -Rob
  2)

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Thank you for visiting the website of Microsoft Windows Vista Community.  The question you have posted is related to Small Business Server and would be better suited to the Small Business Server community.  Please visit the link below to find a community that will provide the support you want.

  SBS 2008

  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 black screen after Login or the wake from sleep / hibernate and flickering screen

  Hello

  I have something of a nightmare with my desktop computer running Windows 8 x 64.

  I did a bit of cleaning, unplug all cables, etc. and then reconnected everything later.

  Since then, I've known the following questions: -.

  After starting and going through the connection, I am faced with a black screen.  The monitor turns on, but there is no pointer.  However, if I clicked at random, it would open a Windows App out of the splash screen, which would then become visible.  If I moved the mouse to the bottom left, to get the splash screen, he would immediately go black screen on me.  He seemed to be refusing to display the splash screen.

  With "display" black screen, I found I could get the Task Manager (Ctrl, Alt, Del) upward and there could access the desktop.  It would then execute as usual, but if I let it go into hibernation or even just having the power of the screen down, it would be black screen again, and I have to use the 'trick' Task Manager to retrieve the desktop computer.

  Sometimes, using the Manager tasks does not always, because he'll sweep between the black screen and the desktop, alternating every 5-6 seconds.  I found through the process from the Task Manager, it stops doing this.

  Now, I did a Windows 8 regenerate, without any change in the problems.  I made sure the AMD drivers have been completely updated (they were) and also physically checked all cables and cables are properly connected and the GPU / RAM etc are properly placed.

  There is no error message displayed at any time. I have also disabled Fast Boot, nothing helps.

  I examined a faulty monitor, but it worked fine for an hour or two at a time, until I got let go sleep or put into hibernation, and I'm at square one.  It would of course be a faulty GPU, or even a PSU failure, but I'm not convinced the symptoms are pointing to them.

  For me, the fact it does not display the Windows 8 start screen after that Login or Wake Up is important.  It makes me think that Windows may interfere with the display in some way?

  I can, if necessary, provide DXDIAG etc, and I "m hoping someone will have an idea of what goes wrong.  I have spent ages going through Google and others, but cannot find a solution to my problem.

  Thanks for any help or suggestion you may have.

  Conrad.

  It solved!  Traded my monitor cable and all problems solved.  Guess he had a break or something in one of the lines.

  Thanks anyway.

• Black screen after installation of the Agent from the view.

  Hello

  I am facing a weird problem on my windows 8.1.

  I have install for use as a template for a pool automated view 5.1

  When I install the vmtools, after that I installed the agent of sight, I got a black screen.

  I tried several times and I got the same thing.

  I'm not able to convert into a model of deployment of workstations after.

  Can you please help me on this problem.

  Thank you in advance.

  I'm a little unclear - which command do you have installed? If you have installed VMware Tools after the Agent of the view, you need to uninstall and re-install the Agent of the view... It must ALWAYS be installed last, even if you're just updating tools.

  In addition, Windows 8.1 is not supported with view 5.1 IIRC

• M40X-141: black screen when you use the WiFi network

  Since I bought my M40X 141 in July 2005, I got black screen frequently when you use the wifi.

  You know this black screen with typical noise from the hard drive.

  I did all the updates without effect. The local seller understood nothing black screen, associated with the use of wifi.

  In the XP world, nobody seems to find this kind of abnormal things so I'm desperate to find a solution to stop the frequent black screens. Recently try a usb dlink wifi dongle (dwl-G122) the constant flow of black screens disappeared
  (An Xp session 10 days was previously impossible).

  Now, I know this is a bug in the original software and I try desespartely to find a patch or updated driver or professional advice.

  Is there someone here who can help a tired multi restart man to use his laptop with the original material?

  Your laptop should still be guaranteed if you bought in June 2005. Take it to your authorized Service Provider nearest and have their say. They should already provide for a procedure for this and know what to do. Sure the frequency that uses WIFI and display inverter coincides, and you get the black screen. Change them should fix this problem.

• Black screen after restart, and the machine to sign

  Send a message to PC-cillan virus my conputer he loses her, so I rebooted it. When he returned to the top of the screen Dell came and then I got floppy diskette seek failure. Strike F1 to continue. I do and it takes a black screen, and the computer is still on Windows does not come to the top or even try. Ive tried F12 and I cannot get into safe mode that brings back me to black screen. It gives me the same symptoms as the BSOD but no cursor.

  Hi jhintense,

  As the virus is running on the computer, we recommend that you first of all allows you to remove the virus from your computer. To do this, you might consider contacting the provider of security software.

  Try these steps and check if your computer starts on the desktop.
  Step 1: Try the last known good configuration
  a. start your computer and press the F8 key continuously to see the menu advanced startup options.
  b. in the menu, select last known good configuration, and press to enter.
  c. see if the system will load very well.

  Step 2: Disable the Floppy drive in the BIOS (Basic input/output system)
  a. start your computer and press DELETE continuously on the screen of the BIOS see.
  b. turn off the power or turn off the disk and save the settings.
  c. restart the computer and check if Windows loads very well.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• black screen, when you open the virtual machine console

  Hi guys need help in answering the following questions:
  When you open the console of the virtual machine, the connection process is fine, but it stops at a black screen

  

  That's what I use:
  (1) Windows 7 x 32
  VMRC 2) 5.1.0.20447
  (3) Mozilla Firefox 18.0.1
  (4) VMware vSphere Client 5.1
  (5) Vcloud 5.1.0.810718

  Here is my log:

  13/01/29 10:15:42.100 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:42.101 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:42.101 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}, VMRC_EVENT_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance"vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}"ID - 2 modes - message mode has 2-3
  29-01-2013 10:15:42.101 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:42.103 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:42.821 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:42.821 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:42.832 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C]}
  29-01-2013 10:15:42.833 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:42.845 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:379] 10:15:43.901: control of the VM has not been created
  29-01-2013 10:15:43.902 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:15:43.909 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.909: control of the VM has not been created
  29-01-2013 10:15:43.923 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.923: control of the VM has not been created
  29-01-2013 10:15:43.925 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.925: control of the VM has not been created
  29-01-2013 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:44.275 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}, VMRC_EVENT_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance"vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}"ID - 2 modes - message mode has 2-3
  29-01-2013 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:44.276 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:44.957 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:44.957 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:44.958 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD]}
  29-01-2013 10:15:44.959 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:44.970 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 10:15:46.770 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:46.770 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:46.771 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}, VMRC_EVENT_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance ID 'vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}' - mode 4 - message mode has 2-3
  29-01-2013 10:15:46.771 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:46.772 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:47.339 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/common/ScriptableObject.cc:321]: ID of property not found: onMessage
  29-01-2013 10:15:47.339 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/common/VmrcPlugin.cc:2548]: onMessage Manager call failed
  29-01-2013 10:15:47.379 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:47.379 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:47.380 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996]}
  29-01-2013 10:15:47.381 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:47.388 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 10:17:20.197 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:13.788 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:13.792 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:15.303 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:59:15.308 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:59:15.324 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:15.324: control of the VM has not been created
  29-01-2013 10:59:15.326 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:15.326: control of the VM has not been created
  29-01-2013 10:59:33.283 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:33.284: control of the VM has not been created
  29-01-2013 10:59:33.540 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:59:33.540 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3

  Windows 7 x 32

  That's kinda our old friend is back.

  Two checklists

  1. check the version of the VM VGA driver, if that's the case, you must update the WDDM driver display driver.

  2. make sure that you use HW 7 and more.

  More info here