Issue with XPS 630i nvstor SSD

Similar Questions

• My Dell XPS 630i cannot manage a 960 GTX GPU?

  Hi, I've been a fan for a long time in this forum, it has helped me MANY times! -I hope that it can help with this problem. I have a Dell XPS 630i, and I would like to upgrade the graphics card for a GTX 960. -Can the system handle it? Is it compatible?

  My system:
  Dell 630i XPX
  Win 7 Pro
  4 GB OF RAM
  Stock power supply 750W
  SATA 500 GB hd
  two 8800 GT SLI vid cards
  1.0.12 BIOS that is installed on the PC.

  If you have any other questions, feel free to ask. Thanks in advance.

  P.S. I know that there is a new version of BIOS on the Dell Web site for this (1.0.13), system but before the upgrade, I would like to know if this installation is possible even first (never updated the BIOS before and no sense to do if not compatible). Thank you.

  I just did this, Dell xps 630i 2.4 ghz x 4 8 GB ram. installed the evga gtx 960 only problem is this card takes a pcie 8 pins. the seller has provided adapper taking two 6-pin pCI to a 8 pins. works very well...

• (Redirected) XPS 630i

  I have a xps 630i with 2 x radeon hd 3870's, graphics cards crossfire caught in charge. What can I put my graphics cards?

  I could fit a radeon 270 r9 or a nvidia gtx 760 or y at - it a duel map update I could go for.

  Any help would be appreciated .i know my pc is old, but id like if possible upgrade.

  Hi vickerscs,

  Please repost this in the forum faster assistance office.

  http://en.community.Dell.com/support-forums/desktop/

• CrossfireX, ATI Radeon HD 3870 + XPS 630i Windows 7

  Hello

  I have a Dell XPS 630i with (2) ATI Radeon 3870 HDs in CrossfireX configuration (by default when bought). It originally shipped with Vista 32 bit and worked very well under all future versions of updated drivers and catalyst and catalyst.

  I recently installed Windows 7 64 bit on a separate partition, and that's where the trouble starts. Windows 7 recognizes both of my cards under Device Manager, however during the installation of the latest catalyst suite and drivers (9.1); It does not recognize that there is a CrossfireX configuration and therefore won't give me CrossfireX option in the menu drop-down graphics (in advanced view). Under information, it shows that one of my cards is the main Board (which is my monitor is attached to) and the other (secondary) is set to disabled.

  I read a little about these cards, as well as the ATI that Dell uses a tweak of specific motherboard (and thus a specific driver) cards to make these cards work in crossfire on a so-called nVidia motherboard, as I understand it. However, I have no idea about the validity of this claim.

  My question is: what exactly should I do to activate my card secondary catalyst so that the CrossfireX option will appear in the drop-down list in the view advanced in Windows 7 64 bit?

  I am ready to provide any other information if it will help find a solution to this problem.

  Thanks in advance for any information submitted.

  I solved this problem yesterday. You need to download the original video drivers on the site of Dell XPS 630i section and install them. This measure of Crossfire on the cards, you can then uninstall the old drivers and use a program like Driver Sweeper to remove all the remains of drivers. Then install the latest version of the suite Catalyst and after restarting it should recognize your Crossfire configuration.

  Kind regards.

• XPS 630i rehabilitation project - what can be done to modernize an old computer

  7 years on a single computer without difficulty is pretty cool, but its slow significantly, can't do recent games, video stream teams all the time, move files and using video editing software is almost eternal.

  The system is XPS 630i, CPU = QX6850, 3 GHz, 8 MB, CDKE, G0. RAM is 4 GB. video card is two cards of the crossfire Radeon 3800 series.  Vista Home premium 32-bit. storage is disk 920 GB internal and external two drives of 1 TB Buffalo (1 is the backup of the system)

  (1) is there a CPU upgrade option?

  (2) update of what graphics card?

  (3) should move from Vista to another help system?

  (4) is there an option to upgrade to RAM?

  I can still a few years out of this system, with say, $500?

  Thanks for the tips

  JMNessel3

  Thank you Philip for your thoughts.

  My 630i has 4 GB of RAM installed.  Dell said it's the max.  Evolution of operating systems that would change?

  Change to a 64 bit OS you will allow more than 4 GB of RAM and Crucial says that the maximum is 8 GB address:

  http://www.crucial.com/upgrade/Dell-memory/XPS/XPS+630i-upgrades.html

  However DDR2 RAM has increased a lot in price recently and the $142 - $208 maybe not worth it. That money would be better spent on the Solid State Drive.

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN

• iPod Touch 5 Gen - iOS 9.3.1 lightning connector issues - with accessories

  Has anyone seen a problem using iOS 9.3.1 on an iPod Touch 5th generation with lightning connector devices?  Specifically, I use the iPod in a cradle of scanner which connects via the connector of the lightning, until iOS 9.3.1 the cradle was visible to the application, but once it has been updated the scanner loses communication to the iOS device and application.  IPod charge and connect to iTunes, no problem, but refuses to see the cradle, I have another iPod on an older version of iOS, which connects to the cradle even without problem.

  To try to find, I've updated the iOS to 9.3.2 beta fault from the site of the developer, this problem has now fixed the issue with the cradle.  I can't that assume Apple broke the connection in iOS 9.3.1?

  Sometimes an iOS update breaks compatibility with accessories. Since then, he has worked with next beta which seems to be the cause.

  All yo can do is to continue using the beta until the version is rejected in the pubis.

  Have reported the problem to Apple to ensure that the beta version is not yet revised to cause the same problem?

  https://www.Apple.com/feedback/iPodTouch.html

• HP Pavilion Gaming 15 - ak155nm: problem with detection m.2 SSD

  Hello

  I built a computer with M.2 Intel SSD 256 GB 600p and for some reason it does not detect the SSD m2. I have HP Pavilion 15 - ak155nm portable Gaming. Please help.

  Thank you

  Toni

  Yes.

  The Samsung 850 Pro is compatible with the motherboard of your laptop and the BIOS.

  A 256 GB SSD would be a better choice if you can afford it. You can install the operating system of the laptop to it.

  The ability of a DSS must be 160 GB or more to allow using the recovery USB key that you need to have created now.

• Pavilion g6: Atheros connection issues with Arris Modem

  Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

  @s_z,

  Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

  Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

  Please let me know how things are going.  Thanks again for posting and have a great day.

• issue with tables and clusters

  Hello

  Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.

  Concerning

  You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.

  This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.

  

  Have fun

  Ben

• problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

  problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

  See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

• XPS 2720 - replace SSD of 32 GB to 500 GB SSD to use as a boot drive

  I bought a new mSATA 500 GB SSD with the intention of replacing the current 32 GB SSD, but instead of using it for caching as is currently the case, I wish it were my boot drive. I got from crucial and they provided a license for acronis help to mgirating my data.

  But when I tried to replace it, and I changed RAID AHCI in the BIOS, the system could not start (inaccessible Boot device). Even with the 32 GB SSD, it will not start if the AHCI value. It only works when the RAID option. I would have thought that my 1 TB HARD drive was the boot drive and so this should allow the system start just by allowing me to access the SSD within Windows where I could transfer a disk image and put the SSD as a boot device.

  Y at - it a guide step by step that will allow me to do so without having to start over from a clean install. I'm running Windows 10 and prefer not to start Windows 8 and upgrade again.

  Any help would be greatly appreciated.

  Hi Fergoc,

  There is a simple solution to change AHCI RAID, as described here. Let me know if that helps!

• Docking station issues with power - power of the outdated USB hub

  We get an outdated 'USB hub power' error on my docking station with an E7440 anchored in it.  Worked fine, since I have received the device, but all of a sudden it-error when I try to access any flash drive.  Swapped out with a new one, number the same dock.  Also swapped power adapter, also with no effect.  Any ideas on the problem or resolution?

  Did you by chance install or upgrade of Citrix Receiver recently?  I did and my USB ports no longer works in the docking station.  This link has Details of why:

  blog.wisefaq.com/.../USB-Power-issues-with-Citrix-Receiver

• XPS 8500 drives (SSD and HDD)

  I have a XPS8500 that I bought new Dell a little over a year. It came with a 256 GB SSD and a 1 TB HARD drive. When I got it, I noticed the SSD was drive C: and drive D: drive.

  I called Technical Support at the time and asked if the SSD is to fill quickly, given that the Documents and the music are mapped to C:. The person tech says, no, the software Intel would automatically move files little used on the D: drive and keep frequently used on the C: drive.

  Well, I finally filled the SSD and nothing moves to D: was advice I got from Dell Support is incorrect, or there at - it a way to make this work? If this isn't the case, I remap manually the folder music on the HARD drive.

  Hi Steve8500,

  You must move your document on the drive d. records here is a link to help. Don't know you say Windows does this automatically, but it doesn't.

  With a 256 GB SSD, you should have enough space for the operating system and applications.

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner