issues of update 4.0 to 4.1

Similar Questions

• Microsoft has never issued an update for the Win7 disk defragment utility?

  Microsoft has never issued an update for the Win7 disk defragment utility?  Thank you.

  Original title: Win7 updates

  To my knowledge, the Defragmenter from Windows 7 has not been maintained since the liberation.  You have a problem with it?

• Start-up and white screen issue after updating to v10.11.5?

  I can't say 100% that my problems are related to the last update, but I thought I'd ask.

  I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

  Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

  1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

  2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

  3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

  4 computer at boot flashing out to a white screen then restart never

  Thanks for any help.

  Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

  The problems start when my wife logs in to his user account.

  Thought I would mention it.

  Any help/response would be appreciated.

• iPhone 5 netwrok issues after updating ios 9.2.1

  After upgrading to ios 9.2.1 my iphone 5 is not able to register with network airtel cell.

  Hi all

  I am also facing the same issue. My iPhone 5 will not connect to the cellular network AFTER that iOS updated 9.2.1 to level.

  Thank you, Siva

• Qosmio F50 issues after update Bios 1.50

  Hello

  I have updated Bios version 1.50.
  I work with audio software and I noticed the performance issue (about 15%-20% performance reduction!).
  Operational front is also strange.

  Now, I can not turn off the lights or start Media center or something else.

  How can I downgrade the Bios Version 1.30?
  Winphlash doesn't let me do that.

  Help, please!

  Thank you

  May not be the answer you are looking for, but have you tried to do a restore of the software? Remember to back up everything!

• compatibility issue after updating to the latest version of iTunes

  I have windows 7, 64 bit and have had iTunes top for more than a year.  I've just updated to the latest version and now I can't access it.  It is said that there is a compatibility issue.

  I would like to uninstall iTunes, reboot your computer.

  Reinstall again. If you went on an older version, which might be the cause.

  iTunes for Windows Vista or Windows 7: troubleshooting...
  http://support.Apple.com/kb/ts1717

• BSOD issues after update 8.1

  My computer has no problems with Windows 8.0.  After the Windows 8.1 update, the system will BSOD crash leave once all the hours to once every few minutes.  I didn't notice all patterns on the block;. It is not obviously related to the execution of any piece of software. Often, the error message is different from the previous.  Some I've seen include:

  • Structure criticizes Corruption
  • Kernel security check failed
  • Memory management
  • IPF in nonpaged area
  • Unhandled Thread Exception system
  • Attempt to write to Readonly memory

  The research I've done has led to assume that it is a driver issue, but I am not sure. Today, the computer has to reset several times without warning and without displaying any error messages at all.  How can I get to the bottom of what's going on and solve the problem?  Any help would be greatly appreciated. Thank you!

  Thanks for the information.

  Your RAM is faulty and must be replaced.

  Kind regards

  Patrick

• I'm having issues an update of Adobe CS5 hiking version 12.0 installation

  Whenever I try to install the update available, I get the following message:

  "The following updates do not have install." If you want to install these updates, fix the issues below and try again:'

  

  Help, please!

  Try direct updates

  https://www.Adobe.com/downloads/updates/

• Issue by updating the configuration of the specific data of the provider for a virtual portgroup distributed in vcenter 5.5

  Hi all

  We strive to update provider specific data in config spec for a group of distributed virtual ports, we are able to reconfigure the dvportgroup for the first time and data updates are visible in the list of mob (QuerydvsbyUUID). But the second time, if we try to update specific provider we receive error in vcenter below.

  Could not complete the operation due to simultaneous changes by another operation

  
  

  The environment we use is as follows:

  Customer vpshere 5.5 ESXi and Vcenter 5.5 5.5.

  
  

  We use Vijava to update the specific configuration of the dvportgroup seller (reconfigureDVPortgroup_Task). When we looked this error, we found below thread:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2016329

  But we try to reconfigure the dvportgroup with the root user in VCenter.

  Ask you please let us know if I'm doing something wrong.

  Thank you and best regards,

  Aristides Maximilian

  
  

  Found a similar question in the communities,

  https://communities.VMware.com/message/2342966#2342966

  The issue is a bad configversion.

  Using the last ConfigVersion (the real value of the ConfigVersion from the portgroup extraction) in ReconfigurePortgroup_Task worked well.

• Strange codec / import issues after update 20141

  Well, I'm bit clueless about a rather odd behavior since the update to 20141.

  Somehow first has problems with multiple codecs that work fine with 2014.0.0 and 0.1

  for example: AAC-Audio in many forms.

  
  

  Audio

  ID                                       : 2

  Format                                   : AAC

  Format/Info: Advanced Audio Codec

  Format profile: LC

  Codec ID                                 : 40

  Duration: 19 minutes 29 seconds

  Duration of the source: 19 min. 29 sec.

  Bit rate mode: Variable

  Flow rate: 192 Kbps

  Maximum bitrate: 251 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling: 48.0 KHz

  Compression mode: lossy

  Stream size: 26.4 million (0%)

  The video stream corresponding (h264) works very well. The same file works without any problem in 2014.0.1

  Even made an another file mp4/h264 + aac right out of first 20141 results in the same issue that I can't import the file back to the first without losing the audio stream.

  The next strange thing is a file just with an Mpeg2 Video stream:

  General

  Full name: D:\Output.m2v

  Format: MPEG Video

  Format version: Version 2

  File size: 362 MiB

  Duration: 10 min 0 sec

  Overall bit rate mode: Variable

  Overall bitrate: 5 058 Kbps

  Video

  Format: MPEG Video

  Format version: Version 2

  Format profile: Main@Main

  The format, BVOP settings: Yes

  Format settings, matrix: Default

  Parameters of the format, GOP: M = 3, N = 12

  Duration: 10 min 0 sec

  Bit rate mode: Variable

  Flow: 5 058 Kbps

  Maximum bitrate: 7 000 Kbps

  Width: 720 pixels

  Height: 576 pixels

  View picture format: 16:9

  Frame rate: 25.000 fps

  Standard: PAL

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  Compression mode: lossy

  /(pixel*Frame) bits: 0.488

  The first frame of time code: 00:00:00:00

  Stream size: 362 m (100%)

  The file has been exported with first 2014.0.1 and I'm able to import it ti 2014.0.1 without any problem. But 2014,1 indicates that the file contains no supported formats.

  All this is repeatable that I re - install 2014.0 and everything works - and 20141 with these problems. This problem appears in new projects as well as in the 2014.0 - imported projects.

  I found another statement of this kind of problem here: https://forums.adobe.com/thread/1595720 - but the proposed solution does not work for me.

  So - any suggestions?

  PS: 2 screenshots (same file in 2014.0.1 and 20141) and link to the .mp4 file used:

  

  

  File: https://www.wetransfer.com/downloads/6a22bbc6e0bf4e6eb4ee52c4f710922220141013131512/699af4 628ca4c2579b20903f4a4918d820141013131512/833bd0

  Hello

  You can try and reset the preferences. Go to adobe documents. Rename the old adobe adobe folder.

  By doing this, you will lose the custom keyboard shortcuts.

  Check whether or not this step allows.

  Thank you

  Arjun

• YouTube embed issues after update

  I ran the update of the generator required for CS6 folio and now when I try to embed a Youtube video using "insert html" under object, the youtube video does not work once I update the folio and try to post from my IPad.  It's just a black screen.  No idea what happened? I use the proper embed code (not flashing)
  It worked fine until I updated.  I rebooted everything-computer, inDesign, etc.  Thank you, Mark

  We just released an update for DPS tools dealing with issues around HTML/iFrame and version 25 buttons. You can download the updated components by following the links to http://www.adobe.com/go/learn_dps_install_en.

  Neil

• What happens all by issuing the UPDATE statement

  Hi all
  
  Can you please tell me, what happens when problem user update statement in sga with background process?
  
  Thank you
  Sanjeev.

  Hope you've finished reading your old post. "what happens all by issuing the select statement.
  What happens all by issuing the select statement

  Open the document since the last post and search "how Oracle database of the LMD processes."

• MacBook pro issues after updating to Mac OS siera

  I have problems with the new model MBP retina 15 inch Mid 2015 with Force Touch.

  Even I have the same problem. Prior to Macos Siera update everything worked well. After OS update am unable to run my java applications with netbeans. If I start to run any project in netbeans after a time tomcat server does not start and displays tomcat port XXXX is already in use and could not start.

  As well as the sound noisy fan and macbook pro gets hot on the back side. If I stop NetBeans sound fan stops and the macbook to cool in a few minutes.

  After the closure of the tomcat server netbeans IDE does not stop. If you put localhost:XXXX on browser it shows success of tomcat installation page.

  Help us please if you have an idea to solve this problem.

  Having the same problem also.

  Updated since a Yosemite perfectly work for OS X for this!

  The same phenomenon occurs when you try to start Glassfish and vampire tetra using netbeans. Themselves (Glassfish and Payara), they work perfectly well if started via the terminal. I don't really know where there is discord.

• I have an iMac, but no other Apple products, and keeping in mind the long list of issues of update for Sierra, is there an advantage to update me?

  I have an iMac, but no other Apple product, and given the long list of problems on the pages of the community regarding the update for Sierra, is there an advantage to update me?

  You won't see anything, but the problems reported here most of the time. This is a support forum. People without problems, much more numerous than those having problems, but they are not seeking this community to report this fact.

  I have updated both my 2014 11 "MBA and my iMac 2011. No real problem. Performance on the iMac has been well below normal after the upgrade, but pretty much a reboot fixed that.

• Card SD & USB issues after update of El Capitan

  Hi all!

  Just updated to Yosemite's El Capitan.  Running iMac (21.5 inch late 2009) - to update of Yosemite point has been completely up to date as well as all software and drivers.  Now problems after the iMac to wake up in the morning with some of the built-in ports.

  1. SD card reader - have to restart so that this works, but only works for an hour or two, it is more readings.

  2 ports USB - external HD holding that nothing else than music files must be disconnected and then reconnected to be recognized and to mount.  Anomaly is that Time Machine on back of the iMac USB continues to function properly and rises when waking from sleep in the morning.

  3-4 ports USB hub plugged back has only 2 operational ports in the morning, must either be disconnected and then reconnected to have all four ports work.  It works sometimes for the rest of the day or only works for one hour UX as well.

  4 keyboard (yes I prefer a cable on BT) takes a minute or two to be recognized after the awakening of fashion 'sleep' in the morning.

  I tried to reboot my machine?  Yes, several times.

  I tried to reset the SMC?  Yes, several times.

  I tried to reset the NVRAM/PRAM memory?  Yes, several times.

  Any suggestions on additional solutions without getting really heavy in the Terminal?  Not really keen to try some of the recommendations Terminal found here on communities, as I do not play with the programming of the OS.

  Thank you!

  Thanks for the nine people who have seen this post.  Unfortunately no one answered, so I 'solved it' of it the only way I knew how.  Rolled back to Yosemite.  I hope that the new Sierra OS will be an improvement on El Capitan.