It's training institutes VMware asks for VMware id if sign up for class VCP - ICM
Currently, I am a VCA and preparation for VCP510-VTC, can I use my VMware certification id even VCP training or should I get a different category id (id VMware) to apply for examination VCP.
That's because you've been trained in VMware portal mylearn, btw I got my answer in another thread
anyway thanks for your reply Mustafa...
Tags: VMware
Similar Questions
-
Classroom training cheap VMware
Hi all
I am 100% interested in Vmware and seeks to be certified VCP. However, I'm low budget so I am looking for a very inexpensive authorized Vmware HPV 5.1 or 5.0 classroom training.
My budget is £ 1,000.No idea where I could get the training at this price or below ?
Thank you very much
Your only realistic option with this budget is to take the training with an Academy VMware IT (VITA) rather than a certified training center VMware (VATC).
VATC is companies of training that will make the class install configure manage in 5 days, and their instructors must be certified for VMware (VCI) monitors also although VCPs. VCIs have been evaluated by VMware or VCI of Mentor for the quality of their provision of training as well as their technical knowledge.
VITAs are institutions such as colleges and provide training in general over a period of the whole College. Their instructors should only be qualified VCP.
You can find a training center of VATC here: http://mylearn.vmware.com/mgrreg/locations.cfm?ui=www_edu
You can learn more about Vitaa here: http://www.vmware.com/partners/programs/vap/academy-program-participants.html
-
Hi all
I created a computer virtual Windows 8.1 on October 1, 2013 with the current, at that time version of VMWare Fusion (not Pro, who has the tab network preferences and the check box associated to whether to display it's fast) on my Mac.
Since then, I upgraded the version of OS X to Yosemite and the version of VMWare Fusion to 7.1.1.
At one time, months or years, I started having the prompt below:
A virtual machine tries to monitor all network traffic, which requires administrator access. Type your password for this purpose.
I don't want to allow this, I never asked for this virtual machine to use the "Promiscuous" mode, I don't want to do, and I can't find anyway to turn this off!
I always leave the command prompt and everything works fine. Discussions only I can find this in the forums are all related to people using ESX to vSphere, neither of which I have no knowledge where all used.
I had an another VM Windows 8.1 on another Mac during the same time, which has crossed all the same updates, and it never shows this prompt.
Please help make this stupid, quickly go and stop this virtual machine to try to use the "Promiscuous" mode!
Thank you - Harold
You have the Hyper-V role installed in the virtual machine?
-
How to make the Connect-VIServer cmdlet to always ask for username password
Hi all
I use the connect-viserver cmdlet to connect between host windows to my vcenter server.
using
The host - Powershell - 2.0, Windows XP, Powercli installed machine.
Target machine - Vcenter server 4.1.0 on windows 2008 server, in the other subnet
I want to have a provision that it must always ask for user name and password to connect.
I took a look at
But failed to get the relevant information.
Any ideas?
Thank you
Madalena
Bangalore-India
My mistake, Connect-ViServer does not accept a SecureString. You first need to convert it
Try it like this
$userName = "username" $passwd = Read-Host ("Password for " + $userName) -AsSecureString:$true $cred = New-Object System.Management.Automation.PSCredential -ArgumentList $userName,$passwd Connect-VIServer -Server MyServer -Credential $cred
-
iPhone keeps asking for password hotmail (iOS 10)
Hello
I had this problem since upgrading to iOS iOS 10 9. I have 3 accounts hotmail on the iphone, once I get the password it will work properly for a period of time (usually one day) and then ask for passwords with a message indicating an error has occurred and iOS needs approval from hotmail again.
I noticed that this often happens when I wake up in the morning and I haven't used the iPhone for a few hours. This problem never arose on iOS 9. I've recently updated the iPhone 6 7 and the problem persists.
Is this a bug of iOS 10? I also tried to delete all my accounts and adding them again without success. My accounts do not use a two-step verification.
I am currently using iOS on iPhone 10.0.2 7
Hotmail is notoriously buggy. For years. Have you tried their forum for iOS 10 compatibility issues? There may be suggestions from there.
Best,
GDG
-
Share documents via link pages without asking for user name
Hello, it is possible to share the page via link document without asking user name when someone opens the link? I only want to share the document for reading does not work. So I don't think that it is necessary to request user name.
Hi erino72,
Thank you for using communities Support from Apple!
I understand you want to share a Pages document with someone, without him asking for request a user name. Given that you're just trying to share a document for reading instead of calibration, then I recommend that you just send a copy by following the steps in the link below:
Take care.
-
I was charged for my coffee game update, which I wasn't aware of. I do not accept to pay about $ 8 for only an update, this game in the first place was free. I want to ask for a return and I will delete the game
Apple or App developers read this forum. If you want a refund, contact the developer to the email address. It is to them that they will refund your or not.
-
Stop tvOS ask for connection of
Each time tvOS turns on, it presents a dialog box connection obscuring who must be cancelled by using the remote control. I don't want this device associated with my Apple ID, nor do I want to perform automatic connection. How can I stop the he asks a login?
Manually configure your Apple TV
- After selecting the value manually, choose your Wi - Fi network and enter your password.
- Wait your Apple TV to activate, and then sign in with your Apple ID. If you prefer to connect later, choose Skip this step.
- If asked, choose a device to send a verification code to. then enter the code on your Apple TV.
- Complete the steps on the screen to choose the parameters for location, Siri, screensavers and sharing analytical Services.
If you do not skip this step, you will be asked for your Apple ID.
-
Some programs using windows 10 ask for flash has to be installed, but it is already!
10% of my programs (e.g. Pandora) ask for the Flash needs to be installed, but the last Flash is already installed. These programs run on Chrome. Technical support for these programs say just move to Chrome. Any ideas?
It's crazy, but there are separate installers for Flash for Firefox and IE, Chrome, he joined and Edge might as well.
To see if Firefox has detected a plugin compatible Flash on the system, you can check on the page modules, either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click on Plugins. On the right-hand side, scroll down to the gray at the bottom area and are looking for "Shockwave Flash". You can change it always be 'activate' to 'ask to activate?
If he is too old to activate, or completely absent, you can get the latest version on this page:
https://www.Adobe.com/products/flashplayer/distribution3.html
In the first table, find the row corresponding to "browser plugin", and you can use either the EXE or the MSI installer.
Or if you want to check first on the disc, it must be found here on the 64-bit versions of Windows for 32-bit applications like Firefox:
C:\Windows\SysWOW64\Macromed\Flash => NPSWF32_19_0_0_185.dll
Can you get enabled and running?
-
Apple Watch does not ask for password
In recent days, I discovered something disturbing. If I take off my Apple Watch and put back on without having to type in the code 4 digit, even after an extra charge per night, it will not ask for a password after an hour or two and works normally. If it's supposed to happen? I couldn't find anything in the support forums.
I got my setup shows to use a password because I got it last December.
Suzanne
Hi Suzanne
If you use the following settings:
-On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - on.
-On your iPhone, in the application of Eve, go to: Watch My > password > enabled.
-Also on screen settings of password - unlock with iPhone turned on.
Then, after putting on your wrist, your watch will unlock after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.
Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.
More information:
-
Thunderbird, constantly asking for passwords by e-mail
Thunderbird has worked for years OK but recently decided to ask for passwords of e-mail, and then ask again, several times, even though I told it to remember using pw Manager. When pw is given, he just keeps asking until I have abandon. Receives emails from Gmail, but I can't send Tbird. No problem with gmail itself as I can connect directly and send and receive mail, but then I get a message from gmail on Tbird telling me that I just connected via my browser. All very disappointing.
most common cause defective or reach products anti antivirus.
Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
- Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX
- If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.
The other option is that your provider has changed the parameters required to connect.
Please add the troubleshooting information to your post
To find troubleshooting information:- Open the help (or click Help three-line-icon and select)
- Choose troubleshooting information
- Use the copy button in the Clipboard to select them all. Do not check box "include account names!
- Paste this into your post.
Please post back with that information and any other questions you may have.
-
Firefox keeps asking for password when I send emails
Firefox version 35.0. When I open Firefox and do pass on messages, no problem. When I write an e-mail and send it, Firefox asks me password. I am able to send and receive e-mail while open. If I close Firefox and open, it ask password when I send. Months ago, I changed my password to connect to Netzero.com (which made more secure). Since then, I had this annoying password request. How to satisfy the password login server for receive/send emails?
Is it asking for the password, or the web site of Firefox? The only time that
FF you will be asked a password is if you have the active master password
in the Password Manager.Open the Password Manager. There is a search bar on top of the
page. Enter the name of the site. Press the button view passwords.
What's the correct information? Note: maybe more then one entry there.Left on the icon in the address bar. A display of site information window should appear. Select more information. At the top of the window, select Security. Now select passwords saved view.
-
A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password. This started after I changed the password of Apple resulting for the purchase of a new iPhone.
My iPhone 5 has been damaged and the screen was not visible. As a result, I couldn't open the iPhone. I bought 5 s iPhone and when I got to connect with the iCloud
I remember the answers to security questions. The seller must change the password and enter new answers to security questions, I did. This happened in Bangalore. When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.
Four Messages are appearing: the first is on the top.
Other messages are:
2. ' cloudd wants to use the kenchain 'local products '. '
appearing on the screen and ask for Keychain password password.
3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.
4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.
It of an upheaval and please suggest how to solve this problem
Hello remy!
I see that you are either prompted by iCloud Keychain with various alert messages. I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you. Please follow the instructions in the following support article:
If your Mac keeps asking for the password in the keychain
Thank you for using communities of Apple Support.
See you soon!
-
My SMTP server Govind always ask for a password when I send the mail, why?
I receive email fine. But when I try to send an email on the Server SMTP Out going for a password. I put a password when I change the configuration server. But it still for a password for each outgoing mail. This problem, I first noticed around Nov 17 14. It was just after a few dates for Thunderbird.
I NEED HELP PLEASE, WHAT IS THE SOLUTION TO THIS PROBLEM?Next time it asks for a password:
- Enter the password
- Select the check box to "use Password Manager to remember the password."
- Then click OK
-
mail for Mac keeps asking for my gmail password.
Why mac mail keeps asking for my gmail password?
Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.
The problems of Keychain - see post of khati
Maybe you are looking for
-
Since the upgrade to El Capitan, I can't drag and drop correctly to my reader network backed within the same window of the finder. Now the file on the device of destination for a while used to view lower-level items such as drives, folders, etc. subf
-
Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.
-
What microsoft software is locked/hidden registry entry "DbgagD" used with?
My antivirus software informed me that I have a locked/hidden registry entry, which is not common. What microsoft software is this registry entry with that dbgagd used? I use vista 32 bit. My computer works without any problem, but I'll try to find t
-
My command prompt does not recognize the command h
I have Windows 7 Ultimate and I tried to solve a problem without report with generated by an SD card (content appears to be empty on computer, but the exhibition of photos on a camera). Among the solutions proposed on my card SD card problem was the
-
Select the security setting in the Bios Menu
Hello I have a 4545 s Hp's Probook all the security in Bios setting options are disable and I don't change them How should enable security options in the bios menu