It was a blur or a black bar 'offensive footage', help!

Similar Questions

• black bar more close, minimize and full page.

  Even so, the close, minimize and full symbols page still work, they are hidden by a black bar in the upper right of the screen. This showed up a couple of days. I've just updated to Firefox 30.0, but it does not eliminate the black bar.

  I appreciate your help, I found the problem in safe mode! That was the theme, Aeon Big7.1. It is odd that what happened out of the blue, without changing anything. I'll see if I can contact the developer to see if he has any suggestions.

• Qosmio G10-133: black bar in the middle of the screen

  I had a display of my G10 problem before, last year the malfunction just screen to a point where it would remain empty and I have to constantly push the display button to make it work. Needless to say that I sent and Toshiba has replaced the graphics card.

  But now I have another problem of display. An hour ago, I was using my laptop and all of a sudden a massive black bar, would say about 7 to 8 cm wide appeared in the middle of my screen. I tried a fresh install of the operating system, update of the graphics drivers, but its still there. If I turn on my laptop to the phases of the white bar to really show the full screen again in a black bar.

  Someone has an idea? Any help would be greatly appreciated.

  Kind regards
  Rhys

  Hello

  before we can send you a better feedback, will you please connect an external monitor to your laptop and let us know if you have the same black bar there?
  Could you also start your laptop and enter directly into the BIOS settings. Is there a false image, too?

  Concerning
  chain

• Calendar resumes always full screen with black bars at the top and bottom

  Calendar always starts like that. I can reduce and enlarge the window, and the problem disappears when the application is open. But once I leave the app and re - open, I have the black bars and minimize/maximize again to get the calendar view full-screen. Seems to happen on the screen of my Air and when you are connected to an external monitor.

  Thanks in advance

  

  Hello

  I have the same problem.  I had this bug with 10.11.x for awhile and then he suddenly stopped.

  I don't really know how...  Maybe it was a cleaning with Onyx, but I'm not sure.

  Since the upgrade of 10.11.4 today the bug came back.  I ran Onyx on the system without a bit of luck so far.

  @xryancx: do you have that you have installed a beta version of Mac OS X?  It was my case (El Capitan GM) but I did upgrade to the official, as soon has - it is available on the Mac App Store.

  Some people think that I've noticed is that the bug does not affect view DAILY.

  Step to reproduce:

  1. Calendar launch (you'll get the bug full screen)
  2. Exit full screen
  3. Click on daily view
  4. Return to full screen mode
  5. Calendar of quit smoking
  6. Calendar lunch again (there is no bug with day mode)

• Black bars moving on the screen, flickering screen

  Hello everyone, I have buyed this summer than a laptop and I noticed several times some Black bars moving on the screen, I tried a few methods how to remove the battery, restarting the computer, etc... After the reboot, everything seems to be ok, what guys do you recommend me to do? I live in another country (Romania) and the laptop was buyed Austria - MediaMarkt, I can't get the laptop to the place where I buyed of... The laptop is a HP Pavilion 1352Eg G6, I expect answers, thanks in addvance, best regards.

  I would like to start by assuring the BIOS and video card drivers are updated here.
  
  Since it is temporarily resolved by restarting, it might be a software problem and driver updates help in general.
  Have you noticed if it seems to happen after using a certain program?
  
  You can try to connect the laptop to an external monitor. If the same behavior is on the external monitor, then it's a video card problem. If it only happens to the screen of the laptop, then it might be software or a hardware in the Control Panel, motherboard problem or somewhere in between.

• Designjet C1633b: Test Page shows only the black bars

  I followed the instructions of Bob and actually got my Designjet wake up!  I have his parallel cable connected to a USB adapter and programmed to the USB001 virtual port in my computer of latest windows 7-64 bit.  I use the driver for the HP Designjet 600 (E/a0), which has always worked well on my old xp 32-bit windows computer pro.  Plotter responds to the command "print test page" but shows solid black bars instead of text.  Suggestions anyone?

  (I paid $5500 for this beautiful machine and it works like new.  I refuse to throw in the landfill.  My deskjet 882c original still works perfectly, despite all the improvements of windows over the past 30 years.  If they are unwilling to keep their drivers, HP must indicate their tracers have limited life no matter how much they cost.)

  I'm no computer expert, but I solved my problem getting my Designjet c1633b to print designs new autocad via my 64-bit computer.  All I had to do what trace my drawings to pdf files.  I was then able to print the PDF on my HP Designjet 24 years, as if it were brand new.  I had a little problem at the beginning: my designs were narrowed and margins have been oversized so the scale of the printed image was off.  I solved that by defining the pdf print command to "full size".

  Sorry HP, but as long as this beautiful machine continues to run, I'll continue to use it.

• Black bar on the side of the monitor after the computer restarts

  Hello to all, after uninstalling Android Studio last night, I was asked to restart my phone to apply the changes. I clicked Yes, after reset but I didn't have my display (1280 x 800) full screen and there is a black bar on the right side of the screen.

  I tried to day/uninstall/reinstall my graphics driver (Intel Hd Graphics 3000) and the bar is still there. No option of scaling (fixed to maintain display scaling)

  I tried to take a picture to show the black bar on the monitor m using screenshot, but the black bar does not appear when I paste in paint.

  Can anyone help me please with my problem at hand?

  OS: Windows 8.1 64bits

  Laptop: HP Pavilion 2230us g6

  Thank you for your response. I fortunaely found a fix before I can get to your answer. I tried to uninstall the graphics driver originally from Device Manager > graphics cards > intel graphics hd 3000 > right click and uninstall > then reinstalled the driver.

  Fixed what he was going to the control panel > programs and features > uninstall intel Hd graphics driver > and reinstall the driver.

  Once more, thank you for your answer

• How to add black bars to a screen play?

  I use a Windows 7 15-inch labtop.

  When I was playing a game, he had black bars on the sides (which I liked).

  When I changed the color to 32 bit and 16 bit, the game went in full screen
  

  When I changed it to 32 bit, but it still shows the game in full screen.

  Please show me how to restore it. Please give me specific and clear instructions.

  I want to change it to:

  To this (with black margins on the side of vid):

  

  Too bad. It's actually maintain proportions (after the test of things). Center gives my game of black bars on top too. So after that my game got adjusted to the setting, I used the idea of BossDeeebe, and he came back to 1366 x 768. Thanks anyway.

• Black bars on the left and right sides of all my games when they are full screen mode

  While I was running a game after upgrading vista to windows 7, all the games now have black bars on the sides of the screen that looks to when you watch movies in format wide vs full screen.  What is a display problem? DirectX problem? How should I do? It gets annoying when I want to play in full screen but technically can't because of these bars.

  so I think it is a problem of resolution because I could put in effect of mass of my laptop and now its full screen... I hope I tell me something on warcraft since it can go to lik 1024 x 720 lol... and I won't change my max resolution on my desk... I still think its strange that the game was full screen when I was playing it on vista with the same settings.  I guess that ill just wait for a patch or something and just in front of her.

  Thanks for the help.

• There is a black bar thumbs who took over on the side of my screen

  Original title: the lost part of screen

  Hi I have a laptop advent 8117 and suddenly I lost about 2 inches from the right side of the screen, now it just displays a black bar, any help would be appreciated.

  Thank you

  Hello

  -Did you change to your laptop, after which the issue started?

  I recommend you to follow these steps and check if they help.

  Step 1:

  Reinstall your display drivers, and check if that helps.

  You can also uninstall and reinstall display drivers and check.
  
  a. Click Start, type device manager in the search box of start and press ENTER.
   
  b. locate graphics card and expand the same.
   
  c. Select the graphics you want to uninstall.
   
  d. right-click and choose uninstall.
   
  Follow the on-screen instructions. Restart the computer, if prompted.

  Step 2:

  Perform the System Restore to the point that your computer was working normally.

• Black bar on the right side of my screen! Someone help me

  I have a HP Pavilion dv5 - 1234 portable ca (2009) which has Windows 7 installed on it. Everything was perfect until a couple of weeks, when I connected a HDMI cable for the first time. Since then, I have a 3 inch black bar on the right side of my screen. I've tried so many things, and nobody seems to have the answer for me, so I hope to post this will help! How can I get my monitor back normal?

  Kierastillwell

  Because the problem occurs before Windows loads, you should contact the HP Support for hardware.

  For the HP consumer Support Forums

  http://h30434.www3.HP.com/PSG/

• How to go around the top and bottom black bars?

  Hey, I've been doing video games youtube for about 2 years now and recently noticed something.

  How I used to get rid of the black bars using all my settings and then using the "Stretch to fill" function to the exporter, I quickly found that it sacrifices quality I would like to make the edges soft and causing a look less in my game videos. I would like to know a fix as soon as possible so that I can continue to make the content of the strong research!

  Parameters:

  

  The original video was recorded with an aspect ratio of 16:9, but is still the quality of the 1080 p 60 (HD 60 fps). I would really like a specific fix for this soon and maybe some tips for rendering in the PPCC region.

  Thank you!

  ~ Alex

  The other option would be to just scale manually first.  Looks like it would be on a 3-5% of premium.  You lose a little bit on the left and right edges, but it shouldn't cause much loss of quality at all.

• Remove the black bars on the sides of the clip?

  Hello

  I am changing a clip in Prime Minister 11 elements. It is a file of 25 frames per second. I haven't shot the clip, but I was told that it was a normal life (not widescreen) video PAL. The clip looks like this when I'm editing (screenshot).

  What concerns me are the two thick black bars on both sides of the clip. What are the causes, please? What is the clip was really wide and I am editing in normal mode and the best way to remove because I imagine they will be visible when the final product is show on a DVD or TV.

  

  Thank you very much.

  Steve

  Steve

  Summary

  Thanks for the great information that points to how you create your video source.

  You seem to have no correspondence between the video properties and pre-defined description of the project and still have black borders.

  Solution: To scale the video in the box monitor Edit just at the point where the black borders have disappeared.

  Details

  If you have a PAL DV Standard or PAL hard drive Flash memory/Standard 48 kHz project screening and have

  an import of video files with properties, then you should not see black borders on the video screen, in the

  Change the monitor in the region.

  The only explanation I think is likely is that the person that you gave the video intentionally or not

  exported without the right scale, in the edit box, before exporting it.

  At this stage, then you the intensification of the video to remove black borders is the answer. Click on one of the handles

  the bounding box and make hanging them just to the point where the black borders have disappeared. Depending on the export destination

  more attention needs to be addressed with the dealer of securities video creation with regard to the safety limits for

  text.

  Please see the bulletin and review, and then let us know if what I suspect is likely.

  Thank you.

  RTA

• How to remove the black bars after image rotation

  I am very new to the use of first pro. I took a video with my smartphone like the contents of a project.  The original size is 1280 wide and 720high.  I imported the video and needed to rotate 90 degrees.   Instead of the scale I need tall. I imported and then under effects control - motion - rotation to rotate how I wanted.

  But now on the screen has black bars on the sides from the turn, and when I export the video basic settings is grayed out so I can't change it. It is game/set at 1280 x 720 with black bars.

  How can I remove the black side bars in first pro to fit the dimensions of the video shot recently?

  Great! I'm glad to hear it. Thank you for the presentation of reports. If you don't mind, please mark my answer as "Correct".

  The reason for which the clips were 56% was so that they would hold the frame of landscape size. Once they were they belonged, they were happy to 100%.

• Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Bring her back. It's new, it's at the shop for sorting or replace it, not you to try to fix it.