It would make a difference with the network to change to Wireless Broadband?

Similar Questions

• Empty blackBerry Smartphones host routing table, will not register with the network.

  I want to apologize if I put this post in the wrong thread.

  So here's the question. I sent a request to my service provider to upgrade several SIM's have Blackberry service added to them. I asked specifically for them to make sure that the SIM card have been set to BES not BIS. The first SIM card I try to register with the network does the following for me. The phone, before I save it with the BES server can call and surf the internet. Once I have sync the phone with the company's server and I go back outside to check on her send and receive these emails, I try to control the internet and it says that the service is not available. I have 3G (Yes capitol) service and I can make phone calls. The host routing table is empty and when I try to save the phone it just says 'sent message' but I never receives the roads. I wiped the phone and repeat the steps with the same result. I contaced the carrier because all the Google search I did pointed to the carrier but they swear the correct plan is attached. Please if anyone can help me it would be greatly appreciated.

  Hello and welcome to the community!

  In fact, he should persist with the carrier. But first try to remove this BB to your BES, then by the ResetToFactory WIPE to remove the it strategy. Then run everywhere with the BB, ensuring that you can do all the activities of BIS (including filling of the HRT) before activating the BES. If it continues to fail, then you must climb the carrier and BIS get work before you activate BES.

  HRT and the functions of BIS should not be affected by BES, unless there is something in your it strategy that does. It is not very likely but it should impact the devices ALL active BES, not one only.

  Good luck!

• Unable to connect with the network via iphone or ipad

  Unable to connect the Apple TV (2nd generation) with the network via Wi - Fi using the remote app!

  The remote application required the devices to be on the same network, and home sharing enabled on Apple TV. The physical remote control would be necessary for the installation if this has not been done already

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Problem with the network connection Wireless since installation of win 7.

  I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
  And the funny part is that when it detects one network different, other than mine, it connects and works very well!

  I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

  What to do?

  Hi KlinzmannFussballspielerin,

  Welcome to the Microsoft Answers community.

  Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

  I suggest you to update the network drivers.

  Steps to update of network driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the network device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

  To solve your problem, try to turn on network discovery. To do this follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (How to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  7. in the value data box, type 1 and then click OK.

  8. close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Is there a driver for Windows 7 available for this printer? One user in our office was able to make it work with the Vista driver.

  Is there a driver for Windows 7 available for this printer?  One user in our office was able to make it work with the Vista driver.

  According to the website of Epson here

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Epson%20fx-980&OS=32-bit

  the latest drivers are for Windows XP 32-Bit.

  This Epson Web page says drivers

  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=en-GB&kbid=324521

  are available via Windows Update.

  Microsoft Windows 7 Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=Epson%20FX-980%20Impact%20Printer&v=Epson&UID=C276001&l=en-us&pf=0&PI=0&s=Epson%20fx-980&OS=32-bit

  says it's not compatible.

  Clearly, there is an inconsistency in the tips above. I would try the road to Windows Update to see if his list - I would test it myself to see if its listed, but my connection to Windows Update seems to be suspended.

• Windows Media Player cannot play the file because of a problem with the network or firewall settings.

  Windows media player cannot play the file because a prblem with the network or firewall settings, you can help me solve this problem?

  original title: windows media player

  Hello

  1. you remember to make changes to the computer before this problem?

  2. do you get this error when you try to play a specific file or all files?

  Follow these methods.
  
  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: I suggest that you disable Antivirus software and firewall temporarily and check.
  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software Tour

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Note: Firewall and antivirus to protect your computer against viruses and other security threats.  In most cases, you should not disable it.  If you have to disable it temporarily, you should reactivate as soon as you are finished.  If you are connected to the Internet or a network while the firewall and anti-virus are disabled, your computer is vulnerable to attacks.

  
  Method 3: try to change the proxy settings.

  a. open Windows Media Player, press the Alt key to bring up the file menu.

  b. click on the Tools menu and select Options. Click the network tab.

  c. Select a Protocol (HTTP and RSTP), click Configure , and then select Autodetect proxy settings or use proxy settings of the Web browser (available for HTTP protocol only). Do this for each protocol.

• I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  Not compatible with the OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the new OS

  I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  System indicates the computer is not compatible with OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the latest OS.  I think that later models of Macbook Pro 17-inch with processors that allow updates.  I was wondering if these can be swapped or if alternatives were available.

  Only the RAM and storage (HD, SSD) can be changed.  Everything is welded to the map logical and selected specially for the system configuration.

  I'm sorry.

• TCP on PC server with the network interface has 2

  If I need to create a TCP on PC server with the network interface has 2 with a different IP address, for example 192... and 172... and the IP address of the client side is 192..., is there something I need to take care.

  Any suggestion, thank you.

  No, by default the server listens on all interfaces.

• Windows system error: there is an IP address conflict with another system with the network. How do I remove this error message?

  I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.

  This means that all that he says.  Your Windows system has an address that already exists on your local network.  Turn your system off and use a working system to locate this address and to which unit he belongs.  In most LANs, the router's DHCP server.  You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.

  Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system.  You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• continuously appears with the message that my WiFi (Wireless LAN) is disabled

  My HP Connection Manager opens with the message that my WiFi (Wireless LAN) is disabled permanently, but I have no problem to connect my computer to the signal from my Belkin.b23 plug in router set wireless.  I am able to browse internet while I'm typing.  Should I worry about this message?  If so, I don't have the first clue about the activation of this feature.

  Hello

  1. don't you make changes to the computer?

  2. which version of the operating system are you using?

  3. What is the full error message you get?

  4. do the icon windows brand of task red bar see the notification in wireless?

  Try to uninstall and reinstall the HP Connection Manager software and check if the problem persists.

  See the site mentioned below for the procedure to uninstall a program:

  http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program.

  If the problem persists try help on the HP forum site mentioned below:

  http://h30434.www3.hp.com/.

• Since I upgraded to CS6, I had problems with the permissions being changed on my files!

  Since I upgraded to CS6 I had problems with the permissions being changed on my files after that I have download on my server. I don't know how to fix this. My webhosting service says this is an issue on my end and it seems that CS6 has a CS5.5 with no glitch. How can I fix this to happen?

  Have you installed the 12.03 CS6 update yet?

  Adobe - Dreamweaver Support Center: Updaters

  12/12/12 The last update for Adobe Dreamweaver CS6 includes optimizations for the HiDPI screens, improves performance in Code view, rendering Live View and permissions of the FTP transfer problems addresses.

  Don't forget to restart your computer after installing the updates.

  Nancy O.

• Can I make a search on the network with HP Laserjet M1132 MFP that is connected to another computer?

  I can't seem to be able to scan with HP Laserjet M1132 MFP on the network (printing works fine). Is it possible, and I just don't know / are unable to connect or it doesn't have this feature?

  * Everything works fine on the computer that is connected to the multifunction printer over USB cable

  Hi Deividas,

  I can't wait to hear that you have questions.  For the LJ 1130 base series networking is not supported, however for some 1132 models Ethernet network is supported.  It will depend on the exact product/model number for this unit.  Click here to find out how to set up a wired network for 1132 connection the selection of models that supported this option.

  1A configuration of network peer-to-peer sharing of the computer that is connected by USB?

  2. What is the number of product to the rear of the unit, should start with J?

  3. how you analyze (front panel, scanning software, etc.)?

  Let me know and we can go from there.

  Kind regards

• Can someone help me with the problem of Vista Home Wireless (unidentified network)

  I recently replaced my wireless router and now I get "Unidentified network - Local access" when you try to connect to my network.

  This problem occurs only with this computer Vista Home.  (All other wireless devices have any problems (Win7 netbook, iPad, PS3, etc).)
  ipconfig/all shows me a valid ip address, subnet mask and gateway also seems to have a Mac address of zero.
  Norton Internet Security was installed, but I have removed and still have the same problem.

  Hello

  Position of your router would be suspicious here. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.