ITunes can't connect after update to iOS10 - invalid response

Similar Questions

• IPad 2 Air after update to iOS10 wifi turns off automatically.

  IPad 2 Air after update to iOS10 wifi turns off automatically.

  Hello. Could you please identify your router? Also try to describe a little more when it stops, and you can reconnect after that.

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• iTunes can't connect to the store purchases.

  I'm getting the following in a pop -: iTunes can't connect to the store purchases.  If you have any firewall software, make sure it has been set to allow communication on port 443. I had not even the firewall on when I got the message. I have

  Hello!

  You should check the many discussions we have already obtained, like this one video playback iTunes 12.3.1.23 does not or presents an error Itunes - iTunes could not connect to the store purchases - if you have any software firewall, make sure that it has been set to t...

• iTunes can't connect to store purchases. allow communication on port 443

  iTunes can't connect to store purchases. the msg States allow communications on port 443. I did this and still get the same message

  I started having this problem today, I know its nothing I did wrong on my end, it was beautiful before glad im not the only one having this problem

• Older versions of the improved Adobe taking place HD can be deleted after update?

  Older versions of the improved Adobe taking place HD can be deleted after update?

  Update from the upgrade - two different animals.  Updates the software that they update.  Upgrades of Adobe products do not need previous versions.

  Improved versions are better off removed before installing updates.  There are occasions where different versions share a file where deleting an older version after installing the newest one can delete a necessary file.

• My Macbook Pro does'nt connect after update to 10.11.6

  Hi all.

  After update from my Macbook Pro to 10.11.6 he starts, but after entering my password, then pressing enter shows the loading animation and it is.  I let him go lastnight believe he worked at something after the update, but this morning, nothing...

  An advise, please.

  Kind regards

  Fabio

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

  If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Satellite C660 - no Internet connection after updating BIOS

  I am a novice user and have a Satellite C660 under warranty that I don't use for surfing the net and Ebay so I hope I can explain my problem!

  Toshiba bulletin board said that the need to update BIOS, so I followed the instructions but since then I have no internet connection, and cannot restore the connection that I lost all help Toshiba Bulletin Board today lost and none of the programs to sort the problems work - e.g.set assistants etc. I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?

  Can someone tell me if it's a failure caused by the BIOS update or I would return laptop to John Lewis for repair? Thank you very much for reading this

  Hey Buddy,

  The default settings in the BIOS load after update? If this is not the case, go into the BIOS and load the default settings. You can enter the BIOS if you press F2 before Windows start and then press the F9 key to load defaults. Then save & exit the BIOS Setup.

  You can access the Internet now?
  You try to access the Internet with LAN or WLAN connection?

  Also check device manager if all devices are recognized correctly.

  > I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?
  You can create the Toshiba Recovery disk every time. Just launch the pre-installed Toshiba Recovery Media Creator and follow the instructions on the screen. You need just a few blank DVDs to create the discs. Disks contain a factory image of settings which can be restored each time and how many times you want to so with these disks, you are on the safe side ;)

• Pavilion Sleekbook 14-b000: unable to connect after update

  Hello.. I'm at my wits end trying to "fix" this problem of mine.
  It all started when I got a Ransomeware virus, I downloaded some antivirus software (AVG, kaspersky, Malwarebytes) to remove the virus from my laptop. He worked in a way if my files are gone. I read on a site that I have to reformat my laptop to completely eradicate the virus. So after that Kaspersky did a complete and all analysis, I got an update from Microsoft. Without thinking too much, I clicked on "update & Restart', which was a big mistake I guess... the patch was fine til he was stuck or frozen for 6 hours... looked up Google again and I just did a hard reboot for it. Laptop was fine again til when I tried to uninstall Kaspersky, when suddenly the blue screen appeared with a sad smile, saying: you need to restart... and I clicked on restart. After the reboot, I was sent to the usual display of the Date and time before entering the login screen. That's when I noticed now that my keyboard, touchpad and external mouse doesn't seem to work. I couldn't connect anymore. Looked up on Google on top of many sites for this correction... seems simple enough... all I had to do was either do a system restore, refresh or Reset... you all one by one... and none of them worked. Could not do a refresh or back to zero because the message says I have no drive partition or something and my drivers are blocked... System Restore didn't work cos the message said that an Antivirus program blocked or something and that I should uninstall it antivirus software FIR... But I can't connect even in safe mode... and I checked if it's just like the keyboard material that gives me this problem... It's not like I tested it in the recovery menu or something... can't remember I'm so tired
  So now I'm stuck with a brick of a laptop that only shows me the time and date of the day... I don't know what else to do... and I'm not a computer person... so I hope there is a way to fix this big mess...
  And thanks for reading the whole problem of long breath of my friends... I'm sorry.

  Have you tried a system recovery? See section-"recovery when Windows does not start correctly:

  http://support.HP.com/us-en/document/c03489643#n144

• work gifts ' n iTunes on my iphone after updating

  After updating my iphone c5 that I now trying all the time to open my itunes on the phone but it dosent work its show me only the photo of the girl and then frozen in this photo

  Try double-clicking it on the home button to bring up the app selector. Slide up and close all apps here. Then do a reset of the device. Hold down the home and sleep/wake together until you see the Apple logo and then release. The phone should restart. Back in music. You may need to wait a minute or two, and the link to Apple music and my music should appear under the writings after that.

• Video (movies/tv/iTunes store previews) in iTunes has stopped working after update 10/12/15

  After update 10 December 2015 for OS X version 10.10.5 - video not playing not in iTunes - no TV doesn't show (time at the bottom of the black screen counter remains at 0:00), movies (video meter at the bottom of the black screen ACCOUNT BEFORE, but no picture/no sound) and no previews film/TV on iTunes Store (time at the bottom of the black screen counter remains at 0:00)

  Hello

  You are not alone! Please visit this community of Apple Support with the link below. And please telephone tech support at Apple and establish a record of the case. The case of several files the fastest, that this will be resolved. It is more likely that the last security update actually crashed the video look at a capacity of iTunes for users of Yosemite. This is a BIG PROBLEM.

  Re: no video on iTunes movies or shows television

• PC Cleaner, Ouch! Can't connect after I use it? I'll have to use another computer. Can't access mine?

  Good yesterday, I decided to come here to try to find out why I kept getting "Windows Explorer has encountered a problem and needs to close." Does this every time I tried to access my computer the files/folders. (downloads, program files, etc...). Well, saw some success messages on PC cleaner and how he solved this problem and others. So I downloaded and executed. Once he was done, I clicked on the option "Fix All". Has done his thing, and then I restarted my computer. Well when I get to the Log-In and click on my user icon, it says connection... and returns immediately (as fast as a breath), once told your settings, the exclusion by the vote? I have not been able to log on since. Help. This happened directly after PC Cleaner has done what ever he did (after restart). Connect to my computer makes me nowhere.

  I can access BIOS but nothing to change there.
  I do not use the password option in the configuration, so it isn't that. Safe mode has no effect. Still can not connect. «Your parameter of loading '... then once 'your settings' "Logging Off".»

  Windows XP SP 3
    
  Help and thanks to whom ever can tell me how to fix this problem

  Do you mean that no matter what you try to do to log in normal or any kind of safe mode, you continue to see a message loop that look like this:

  Starting Windows...
  Loading your personal settings...
  Once your settings...
  End the session...
  Loading your personal settings...
  Once your settings...
  End the session...

  If so, it is usually a sign that your system is currently or has been reached by malicious software.

  I don't think that these links KB will work and KB307545 there's a lot of work - and you don't have symptoms suggestive of a necessity to implement KB307545.  You have symptoms of a file userinit.exe lack.

  There is a malware that removes, corrupts, or replace the file c:\windows\system32\userinit.exe and/or some registry settings associated with it.  It is also possible that your anti-virus quarantined (actually deleted) file c:\windows\system32\userinit.exe, thinking that he was in some way afflicted.

  The userinit.exe is the file that processes your login in normal mode or any kind of Mode safe, so if it is missing or broken in some way it creates a never-ending cycle of failed logon attempts in any mode for all users.

  If you have some other affliction and used the Configuration System (msconfig) utility to add the option/SafeBoot for STARTING systems. INI to solve some problems, it will present the same symptoms a userinit.exe file missing.

  Did you use the Configuration System (msconfig) utility to add the /SAFEBOOT option to the BOOT. INI on your system?

  If the userinit.exe file is missing or damaged in some way, it is usually easy to just replace. Even if the replacement of the file will let you log in again, just replace the file is not solved the problem - it fixes the symptom of the problem.  When you log in again, you must do a little more work to relieve your system of any malware got your system distressed in the first place.

  It can also modify your registry so instead of the registry pointing to userinit.exe, that it points
  in another file called wsaupdater.exe.  Sometimes scanning programs can find and replace the wsaupdater.exe file but not to repair the registry you will need to somehow get the system to start and fix the rest of the problem at hand.

  It is quite popular to have Microsoft create a knockout that describes the problem of wsaupdater:

  http://support.Microsoft.com/kb/892893

  I have not seen the problem of wsaupdater in a long time, but the absent userinit.exe is common.

  The following guidelines cover situations more than the article, but you should read the article anyway to figure things out a little better.

  AprΦs the dΘmarrage on the Console and recovery after run chkdsk/r with success, you should be in the C:\WINDOWS folder and the userinit.exe file is in the SYSTEM32 folder then change to the system32 folder by typing:

  CD system32

  Check the presence of the userinit.exe wsaupdater.exe. They may be there or they may not, but we need to know:

  Userinit.exe dir (post results - the file exists or not)
  wsaupdater.exe dir (post results - the file exists or not)

  No matter what you find, replace in any case the userinit.exe according to a copy elsewhere on your system.

  There is a copy backup of the userinit.exe in the c:\windows\system32\dllcache folder then copy it to the
  the c:\windows\system32 folder.

  In the c:\windows\system32 folder, enter:

  Copy c:\windows\system32\dllcache\userinit.exe c:\windows\system32

  If the file is not found is dllcache, this can work according to your installation:

  copy c:\windows\servicepackfiles\i386 c:\windows\system32

  If even that fails, you can get a userinit.exe on a Flash DRIVE or a floppy disk and replace it.

  There are a userinit.exe XP SP3 on my SkyDrive, you can download:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39%21311

  Answered in the affirmative if invited to replace the existing file and then you should see a
  message 1 file (s) has been copied.

  If you have a bootable installed genuine XP installation CD and the CD is drive X, unzip the file
  leave the CD-ROM i386 folder to the c:\windows\system32 folder by entering this command:

  Expand x:\i386\userinit.ex_ c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a
  message 1 file (s) has been expanded.

  Remove the CD and enter the command "exit" at the Recovery Console prompt to reboot your system.

  Report your results.

• I want to renew my teacher subscription, but I can't connect to update my payment method

  I received this message on last week:

  Your Creative cloud membership will expire on 18/09/2016. We hope that you have been getting the best out of all that creative cloud has to offer. To extend your subscription, please update the billing for your account information, or add a prepaid card.

  Update your billing information (https://accounts.adobe.com/plans//edit-payment?deeplink=true & puser =

  Thank you for being a part of the creative cloud, The creative team Cloud

  The problem is that I can't connect using this url, its towers indefinetly... your systems are down?

  Thanks in advance for any help you can provide

  Jim

  Hi JimTheKing,

  Please try using another browser or restart the same browser.

  If nothing helps, kindly Contact Customer Care.

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• Why the network does not work after update to ios10?

  I can't make and receive calls. In addition, I can't send and receive messages.

  Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  If this does not help, try here > If you can not connect to a cellular or cell - data Apple Support Network

• Why is there a second (new) tab, you can not delete after update to 6.02?

  I am running Windows XP. After updating to Firefox6.02 a second tab was there after my 'Google' default tag. The second tab contains the words "New Tab" on this issue, and when you click the 'X' button in the tab, it does not close. When you go to for closing of Firefox a warning window/box will appear to tell you that you have 2 tabs open and asks if it's ok to close. I thought that there is a problem with the update. So I uninstalled Firefox and then re-installed. Same thing happened, 2 tablets. Any ideas?

  It is possible that there is a problem with the sessionstore.js and sessionstore.bak files in the Firefox profile folder.

  Delete the sessionstore.js file [2] and sessionstore.bak in the Firefox profile folder.

  • Help > troubleshooting information > profile directory: opens showing the file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  If you see files sessionstore-# .js with a number in the left part of the name as sessionstore - 1.js then delete those as well.
  Delete sessionstore.js will cause App Tabs and tab groups and opened and closed the tabs (back) to get lost, so you will need to create them again (take note or bookmarks).

  See also:

  • [1] http://kb.mozillazine.org/Session_Restore
  • [2] http://kb.mozillazine.org/sessionstore.js

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes