Pavilion Sleekbook 14-b000: unable to connect after update

Similar Questions

• Unable to connect after update of the preflight IOS app

  Since the last update of the application of DPS preflight on iOS, I am unable to login to see the projects. I am able to connect to the DPS dashboard with the same username/password.

  What should do?

  Thank you

  Ulrich haha

  The app apple approved is not oriented to our production department. The dev team is aware and is working to solve this problem and get a new construction submitted to Apple for review.

• The PC HP Pavilion Sleekbook 15: Blurred and static Audio after update of Windows 10

  I was using Windows 10 quite a few months now with no problems. My sound has been clear until this morning when my computer automatically updated itself. After the update, I noticed that my sound (which worked perfectly fine before the update) was blurred and subdued, with a noise static when the music I listened to hit a higher mark. This had not happened before. Not until I've updated. So far, I checked to see if I need to update something new for my audio device in Device Manager, but I was told that everything is up to date.

  Previously, a few years ago I had a similar problem when updating from Windows 8, but rather my audio is completely out. Waiting to see if something like that happen again. I'm not sure what to do on my audio now, but I'm afraid to uninstall my sound card where I can bring him back despite says he's coming back. In addition, I don't know what to do for my specific product. I've read that many others have had similar problems, so if someone could help me I would be very grateful.

  Thank you in advance.

  Hello

  You can update driver Audio IDT high definition (HD) and check?

  Version 6.10.6425.0

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59802.exe

  Also, I suggest you to disable all the improvements in the properties of speakers and check out. See the steps below:

  1. Press on the key Windows + X.
  2. Click on Control Panel.
  3. Double-click the sound icon and click on speakers.
  4. Click on Properties.
  5. Click the enhancements tab.
  6. Now, click on "disable all sound effects.
  7. Click OK , and then check if the problem persists.

  If the problem still exists, as a solution, I suggest you uninstall and reinstall the sound drivers in compatibility mode and check if it works for you,. Refer to the steps below:

  Follow the steps to uninstall the audio driver:

  1. Press the Windows key + X key , and then click Device Manager.
  2. Expand 'Audio Video and Game Controllers'.
  3. Right-click on the audio device listed and click on 'Uninstall'.
  4. Select the option to remove the software driver.
  5. Restart the computer after its uninstalled.

  Now download the drivers from the manufacturer's Web site and install it in Windows 8.1 compatibility mode. Follow the steps below to install the drivers in compatibility mode:

  1. Right click on the driver configuration file and click on 'Properties'.
  2. Click on the "compatibility" tab and check the box ' run this program in compatibility mode for "and select operating system Windows 8.1 since the menu drop-down."
  3. Click 'Apply' and click on 'OK' and run the file to install it.

  Hope this helps you...

  Click on Bravo and accept as a Solution if my answer was helpful and answered your question.

  I am an employee of HP!

• Unable to connect after update

  I was invited by my Ipad it needs to update. I ran the update and received a message that he was successful, and I have to follow a few steps. When I choose my network, it won't turn on. It worked 100% before the update

  If the notice you received is on an error with Apple's Activation servers,

  There is a problem known/glitch with Apple activation servers.

  Apple, I think, recognize and acknowledged this problem with difficulties with some models of iPad activation server and have stated that they are working on this issue and it will be resolved as soon as possible.

  I hope more early.

• Pavilion Sleekbook 14-b000: try to install win7 64 bit

  Hey all, uh I got a "hp Pavilion sleekbook 14-b013au" to fix/installation of the new operating system, on, with a formatted hard drive, none of the scores of original disc hp exist.

  They had the hard drive out, he reformatted into partitions of 2 x 250 GB and tried to install win7 64 bit on it, without success.

  They tried to hook up the hard drive on a pc, installed the operating system that way, then tried plugging it back into the Sleekbook and should work.

  They won't win 8.1 back on it.

  I have a copy of work of this OS to a flash drive (used the "Windows USB/DVD Download Tool" to create a bootable flash drive).

  I am unable to install this, as the laptop will not recognize the flash drive, after that Windows Setup starts. Help, please

  Hello:

  I have a few suggestions...

  1. you must ensure that the secure boot is disabled and legacy mode is enabled in the BIOS to be able to install and run windows 7.

  2 make sure the flash drive is plugged into a USB2 port.  It will not work on all USB3 ports.

• Unable to connect after firmware update

  Hello

  I just update the firmware on my R8000, reset a factory and now I am unable to connect to the router with username: admin password: password

  I tried the default factory reset several times and still nothing. My internet works, but that's all, engineering connects, but don't administer the router as it says that the password is incorrect.

  Ideas/Suggestions?

  Thank you

  Jeff

  After about 1 hour and 10 factory reset, I unplugged the modem router and all other connections, I was able to connect...

• HP Pavilion 15 laptop: Solved: unable to connect to my wireless network

  I have problems connecting to my wireless network. In available connections, my network is there with an x next to it. I can click on it and put my security key in, but it says unable to connect to the network. I've updated ready network cards. Any help would be greatly appreciated.

  Bobby

  Thank you for all your help. I'm back on now. I started having trouble a few weeks ago. My wifi connection would pass, and I have to disable and then re activate my network card back. This has been relatively shortly after my upgrade from Windows 10 but not immediately after. Then the other day which didn't work and I could not connect at all. I read somewhere to try to uninstall the network adapter and then restarting. It did not work. I also read to find updates for the network card and install those which, as mentioned by ichi730 as well. This no longer works. Then, I realized that I had not tried to restart the router after reading the post of WyreNut. It worked, thank you! I feel that it is a combination of the two pieces of advice that have worked so.

  Thank you all for your comments, it's much appreciated.

  Bobby

• Pavilion 140 550 - t: unable to connect to the windows service

  Not sure if it's the good advice of post, but here goes.

  Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Windows Service" pop up and WLM crashes when I try to open it. What the DEVIL?

  Had the same problem on the one I just replaced. My laptop became the 'Group Policy' error thing, but I think I fixed it.

  Any suggestions? Windows is a joke!

  If it is Norton Security, then it's a firewall as well and firewalls blocking things, it's that they are supposed to do. So demand for three, you said that this is probably the cause.

  But if you do not want to test it, then try the system restore I've mentioned or reload the image origin, then just put in place the email again and see if it works without the other two installed, first to see if it will work with anything else in the picture.

• Unable to connect after restoring my computer

  Original title:

  Paul

  Why my tom tom used to connect after restoring my computer

  Hi Paul,.

  How do you try to download the drivers for your TomTom? He comes from a Web site?

  I suggest you run the peripheral hardware troubleshooter in Windows 7.

  You can see the help article following Microsoft on how to run the tool for troubleshooting hardware and devices:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also make reference to article Microsoft help at the following address:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Try the above steps and get back to us.

  Thank you

• My Macbook Pro does'nt connect after update to 10.11.6

  Hi all.

  After update from my Macbook Pro to 10.11.6 he starts, but after entering my password, then pressing enter shows the loading animation and it is.  I let him go lastnight believe he worked at something after the update, but this morning, nothing...

  An advise, please.

  Kind regards

  Fabio

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

  If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Cannot connect after update monthly weather gadget.

  Hello, my weather of MS gadget just stopped working right this morning after the reboot required by the monthly batch of updates that happened recently. It just says: unable to connect to the service. Any attempt to change the city just returns not found location. No other changes have occurred on the machine outdoors updates MS. Suppression and relocation of the gadget have the same results. The gadget, however, works very well on the administrator account, but all the standard users see the just failed to connect to the service. I even added a new standard user account and the problem persists. I tried most of the things that I could find in the forums but no luck...

  Have you checked if your Internet Explorer is not set to work offline.

  Update:
  Microsoft has DISABLED the weather gadgets and currency via a recent update of security, because of worries about the vulnerability associated with these gadgets running on your computer. You can read more here: http://support.microsoft.com/kb/2719662 . Adjust the settings of your computer and all these other 'suggestions' people are, will NOT work. The function has been REMOVED from the operating system. It has also been removed from Windows 8 operating system. There are "theorists" who agrees that there is a security problem in the gadgets or Microsoft just doesn't support gadgets (usually from third party software) and has therefore disabled them in Windows 7 and eliminated in Windows 8.
  Thanks to DaveNYC for the Info. Pass the word, because a lot of people is facing this problem just like you.

• Satellite C660 - no Internet connection after updating BIOS

  I am a novice user and have a Satellite C660 under warranty that I don't use for surfing the net and Ebay so I hope I can explain my problem!

  Toshiba bulletin board said that the need to update BIOS, so I followed the instructions but since then I have no internet connection, and cannot restore the connection that I lost all help Toshiba Bulletin Board today lost and none of the programs to sort the problems work - e.g.set assistants etc. I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?

  Can someone tell me if it's a failure caused by the BIOS update or I would return laptop to John Lewis for repair? Thank you very much for reading this

  Hey Buddy,

  The default settings in the BIOS load after update? If this is not the case, go into the BIOS and load the default settings. You can enter the BIOS if you press F2 before Windows start and then press the F9 key to load defaults. Then save & exit the BIOS Setup.

  You can access the Internet now?
  You try to access the Internet with LAN or WLAN connection?

  Also check device manager if all devices are recognized correctly.

  > I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?
  You can create the Toshiba Recovery disk every time. Just launch the pre-installed Toshiba Recovery Media Creator and follow the instructions on the screen. You need just a few blank DVDs to create the discs. Disks contain a factory image of settings which can be restored each time and how many times you want to so with these disks, you are on the safe side ;)

• HP Pavilion TouchSmart 14-n013: touch not working after updates on Windows

  Hello

  My touch screen stopped working after updates of Windows on my laptop froze. I went through all the parameters of the pen and touch, and others to resolve this issue, and unfortunately it still does not. I also rebooted the laptop to factory settings and update all the necessary things in the software updated and updates on the HP site recommended and I've updated the BIOS, but still the touch screen does not work.

  I hope you can help.

  Thank you

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Pavilion 14-ab051tx N4G24PA: unable to connect to any wireless network after the upgrade to Windows 10

  I recently bought a 14-ab-51tx Pavilion N4G24PA, this is my first laptop from HP, it comes with Windows already installed 8.1 and it worked fine.

  The thing is, I kind of get used to using Windows 10 on my previous laptop, so without further hesitation I upgraded to 64-bit Windows 10.

  Here's what I did wrong:

  Instead of update Windows 8.1 for Windows 10, I indeliberately he installed fresh, with couple of mouse clicks, I didn't realize that I also remove the recovery partition.

  I realized only after the installation process is complete, but then it was too late. I look forward to using my laptop with Windows 10 freshly installed inside to make some games just noticed that I couldn't connect to any network without wire, House or public. It recognizes my wifi at home, but the signal bar is bizarre, there is only 1 bar of signal even if the wireless router is only about 10 feet from him, so I checked my other computers and smartphones, but the signal on them is ridiculously high (full bar), it also detects another wireless network that are further away than my wireless router.

  But back to my HP laptop, I tried to connect to my home network despite the signal bar with the right entry security key, but it does not connect, it says "Cannot connect to the network".

  Tried updating drivers with HP Support Assistant and no luck, the problem persists, tried all the solution on the internet, int ip reset, reset winsock, checking and unchecking, always without success.

  Can someone help me please...

  Hello:

  The BOM indicates that your laptop comes with a Broadcom wireless card.

  Have you tried the last W10 driver for this card to support your PC and driver page?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  Exit the: December 17, 2015

  Version 7.35.317.0 Rev.A

  File name: sp74241.exe

• HP Pavilion Sleekbook 15-b000: my laptop makes buzzing noise

  My laptop makes buzzing noise while playing music or video on both headphones and speakers

  Hi @vineeth_7,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion 15-b000 Sleekbook sizzling/buzzing noise. You can try:

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window. Restart your laptop and try the sound.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Reboot the laptop twice to make sure that all updates are completed.

  I recommend to restore the default BIOS settings. You could restore the BIOS withthis document by selecting the reload the default BIOS settings. This helped other people.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.