Similar Questions

• 12.5.1 ITunes will not load on Windows 10 so I can't sync my new iPhone 7

  12.5.1 ITunes will not load on Windows 10 so I can't sync my new iphone 7

  Right click and run as administrator

  See also this document

  If you see an error message "Windows package install" when you try to uninstall iTunes from your PC - Apple Support

• iOS 9.3 will not load because you are no longer connected to the internet

  iOS 9.3 will not load because you are no longer connected to the internet on my phone 5

  Apple has temporarily removed the update due to activation problems then you won't be able to update at this time.

• ITunes will not update because of a corrupted version. I am not able to uninstall the corrupted version. Someone at - it help him?

  I can't update /download new itunes on my computer as it is said that an old version is corrupted. I can't uninstall the old version, because it is corrupt. I'm now stuck and looking for a solution. Can anyone help?

  See excellent iTunes from turingtest2 for Windows troubleshooting guide at:

  Troubleshooting problems with iTunes for Windows updates

  in particular the section on the removal and reinstallation of iTunes and other software components

  It explains how to remove each component individually and what to do if a component will not uninstall.

• 12.3 iTunes will not load on my PC for Windows 10

  I get "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personal or package vendor. "When you try to install iTunes on my Windows 10 PC 12.3. I downloaded the file to install three times and get the same result. Any ideas?

  Thank you.

  BTB6

  Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  If you get stuck tell me exactly step you up and what error messages you receive.

  TT2

• The site will not load because it is only compatible with the version 6 and 7. How do I downgrade to version 6 or 7?

  The site is billing and a very large company that has their billing there won't update to resolve the problem, they say just download a previous version in order to access the site. However, I can't find where to download a previous version of firefox.

  The previous version is still support for security updates is Firefox 3.6.x.

  All other versions of Firefox 4, up to the current version of Firefox 9.0.1 are updated for security and stability and add new features. It is not recommended to descend to such a version.

  You can install the portable version of Firefox 3.6.x to access Web sites that don't work with Firefox 5 +.

  • http://PortableApps.com/apps/Internet/firefox_portable#legacy
  • http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36

  See also:

  • https://support.Mozilla.org/KB/installing+a+previous+version+of+Firefox

• iTunes will not open because windows 10 updated

  Since I updated to windows 10 I can't open iTunes. When I connect iphone to the computer iTunes doesn't open automatically as it has previously.

  First try Fix unexpectedly closes or launch issues in iTunes for Windows - Apple Support .

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Make sure after you have uninstalled all the components Apple to remove iTunes shortcuts from the desktop, taskbar, or start menu before you reinstall.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Windows Vista start problem, \windows\system32\boot\winload.exe.__Could not load because the app is missing or damaged.

  Does not allow me to do a restore, unable to access all the files.

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  See you soon.

  Mick Murphy - Microsoft partner

• Computer HP laptop windows didn't load because the HAL is missing or corrupt

  I have a HP Pavilion dv6605us

  Windows Vista

  Error message I get is:

  File: \Windows\System32\hal.dll

  Status: 0xc000000f

  Info: Windows could not load because the HAL is missing or corrupt

  The changes that I do is I did a clean install of Linux deleting all partitions including the HP recovery partition.

  Now that I have to go back to Windows, I used the recovery disks that I did when I bought the laptop. It took about 24 hours to completely install, then I got this error message when you restart.

  Help, please

  Best thing to do is to nuke the drive,then reinstall Vista again.

  I know it's a long process, but you should get back to run.

  Linux makes strange recovery partitions does not understand and they are deleted correctly, boot and nuke will take care of it.

• I trashed my mimetypes.rdf file to restore stocks of download, and now Firefox will not open because profile missing, please notify

  Until very recently, when I want to download a pdf file, it will open automatically, and recently, for some reason, it stopped automatically opening and just downloaded on my desktop where I wanted. I found the instructions on Mozilla if files uploaded but not display, displaying my profile and then folder to delete. I've trashed (different from delete?) and now if I try to open Firefox, I get the message that Firefox cannot open/load because the profile is missing. Please tell us how can I get the profile folder in.

  Thank you

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I ran a diagnostic on my dell xps and he said that my network 9 cards and 11 will not work because of windows

  I went to the Device Manager to see if something was not working and the 9 and 11 adapters will not load not because of something that invovles windows, I didn't understand and I wanted to know if these cards need to work. Also my Intel graphics driver kernel slows things should uninstall.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

• Windows Movie Maker (Vista) stuck on 'check project files', does not and will not load past to halfway.

  Hey guys,.

  I have been editing videos using Windows Movie Maker with great success, but I have recently installed the K-Lite Codec pack (http://www.free-codecs.com/download/k_lite_codec_pack.htm)

  and since then, Movie Maker will not load one of my projects.

  I uninstalled and reinstalled the codecs but I feel I did something for the Movie Maker of the program itself, installing the codec pack, it came with a list of files it wanted to replace. As I obviously had no idea what I was doing, I just said yes to everything that was recommended. I don't know for the life of me exactly what files were etc however, it seems Director impact because now it does not load the project files.

  It's such an embarrassment because I don't know what is happening and really need this problem as soon as POSSIBLE. Any help would be appreciated.

  Hey guys,.

  I have been editing videos using Windows Movie Maker with great success, but I have recently installed the K-Lite Codec pack (http://www.free-codecs.com/download/k_lite_codec_pack.htm)

  and since then, Movie Maker will not load one of my projects.

  I uninstalled and reinstalled the codecs but I feel I did something for the Movie Maker of the program itself, installing the codec pack, it came with a list of files it wanted to replace. As I obviously had no idea what I was doing, I just said yes to everything that was recommended. I don't know for the life of me exactly what files were etc however, it seems Director impact because now it does not load the project files.

  It's such an embarrassment because I don't know what is happening and really need this problem as soon as POSSIBLE. Any help would be appreciated.

  =======================================
  Might be interesting to try to open Movie Maker and go to... Tools /.
  Options / compatibility... tab and uncheck all filters.

  If you still have questions... do a Safe Mode system restore
  at a time before installing the codec pack could be useful.

  * Proceed at your own risk *.

  Using Windows Vista
  System restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Inspiron 1525 / Windows Vista replaced but disc will not load the drivers

  Inspiron 1525 (6/2008) hard drive failed.    Bought a Western Digital spare hard drive 500G (WD Blue) SATA III 5400 RPM.   (NOTE: this is the 2nd replacement hard drive because I bought the 1525... the first time I replaced the hard drive, everything worked as it should.) Original hard drive was a Seagate).

  Replacement hard drive installation is installed it will not load the Vista OS from the disk to the operating system (which came with the laptop) because it does not recognize the driver for the hard disk.

  I tried downloading the latest drivers from the Dell site, but which did not work or the other.

  As I said, the previous hard drive replacement (an another western digital) works perfectly when I reinstalled the Vista operating system in 2010.

  Any ideas?

  Thank you...

  Thanks for the detailed instructions.   I tried everything, but it didn't work.

  Then I read about someone trying to install the same on an Inspiron 1545 hard drive and need to adjust the drive to align with the connectors using paper and another person was using the foil which made me realize that it was a problem of 'size' or 'worthy '. I then decided to open the laptop and manually set the new drive in place and everything works now. (Dell 1525 has a side load drive holder therefore had to open to make this setting correctly).  The player on the 1525 is 9.5 mm thick, but the new disc is 7 mm... even though the sales page for this player said he would fit a 9.5 mm slot.

  Everything is good now.

• OfficeJet 8500 Solution Center will not load

  Solution Center will not load.  Error message: "HP Solution Center cannot work because your installation of the device is not complete."  Solution Center has worked for 3 years and no recent update of the software of the printer have been made.  Solution Center has been removed and reinstalled using the CD of HP.  This does not solve the problem.  Model is A909g, number CB023A.

  Hi there @MarianGrad welcome in the community!

  I understand that you see the error 'Solution Center cannot work because your installation of the device is not complete'. I have a few links below for you to view other messages and forums with other users with the same issue. They can help. If the problem persists, let me know which operating system you are running and the troubleshooting steps you have tried.

  HP solutions Center can not run because your device installation is not complete. What should I do?

  "HP Solution Center cannot work because your device installation is not complete."

• iTunes will not random on my iPhone6S after updating IOS

  My iTunes will not BE NOT random at all after I did this 10.0.2 software update!  I mean, if I hit random play on one of my playlists, does not choose a song randomly on the reading list and literally play it over and over and over again.  Basically, it does the OPPOSITE of brewing.  It is a major problem and my phone and my iTunes worked very well before this update! Suggestions?   Please?   Or, is the way to Apple, this to trick me into buying a whole new phone?

  Hello Vesper40,

  I understand that, despite trying to mix a playlist, your iPhone is just to play one song of this playlist repeatedly. In such a situation, you may need to disable the screen playing snooze in the music app.
  

  Control playback. Tap a song to play and show the MiniPlayer. Tap the MiniPlayer to display the now playing screen, where you can do the following:

  

  Repeat steps. Glisser slide upward, then press on to repeat an album or a playlist. Double click to repeat one piece.

  iPhone user Guide - play music

  See you soon!