Similar Questions

• Bootcamp update fails after El capitan (please help me alone!)

  Hello

  I think I have the same problem postedBootcamp update fails after Yosemite (please help me alone!)

  But like the other user, I'm a little scared, and I don't want to lose my Bootcamp partition.

  That's why I ask you to help for solitaire (thank you much in advance).

  I upgraded my MacBook Pro 13 "(mi-2010) at El Capitan 10.11.5."

  Then I noticed that I could not find Bootcamp.

  Regarding the other question, the score was still there, but now under the name "disk0s4".

  I used Testdisk, following the advice, and I discovered the missing partion and data (I could make a copy)

  Now, I would be sure to make the right steps to retrieve the situation.

  Here is the output of Testdisk

  

  

  The partition does highlight is the right one, here's where I found my data.

  

  Now, what I'm supposed to do is follow the same steps that I read in the old post with 508484288 to step 7 and + 468284272 in step 8, in this way:

  GPT4 to rebuild using start/end offsets

  1. Sudo gdisk/dev/rdisk0
  2. P (print the complete list of parts)
  3. D (delete)
  4. 4 (part 4)
  5. N (new part)
  6. 4 (part 4)
  7. 508484288 (-start offset in the sectors or the starting point for the Bootcamp part)
  8. + 468284272 (-size offset, rather than the end offset)
  9. 0700 (part of Windows type)
  10. P (list of all parties just to see what changes will be)
  11. W (Write the new GPT)
  12. Y (Yes! really write the new GPT)

  And then I need to rebuild the MBR (as the old post)

  1. Sudo gdisk/dev/rdisk0
  2. P (print from parts list)
  3. R (Recover)
  4. O (current MBR hybrid in block letters)
  5. H (chooses hybrid)
  6. Partitioning numbers be hybridized: 2 3 4
  7. Y (good for the GRUB question)
  8. (Indicator boot part 2) N
  9. N (part 3-flag of boot)
  10. Y (boot indicator part 4 make the bootable NTFS partition)
  11. O (current MBR hybrid in block letters)
  12. W (Write new MBR)
  13. Y (yes! write the new MBR)
  14. Reset

  I'm sure I'm in the right direction, but...

  Many thanks for any help

  Excellent work. The two sets of Gdisk steps are correct. If you are on El Capitan, these two sets of measures Gdisk will fail because of the Protection of the integrity of system being activated. Please disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

• CD/DVD on Satellite U500 drive failed after installing Windows 10

  My CARPET * drive dvd DVD - RAM UJ862AS failed after W10.

  I told myself I need Toshiba ' * 86 device ACPI Compliant added logic and general use "BEFORE I can install the driver for the DVD drive.
  I tried Microsoft idea to remove the pilot of regedit and restart the laptop that should logically result in reinstalling the driver... with no luck.

  I'm about to give up the laptop but am wondering if anyone can help me?

  I am extremely reluctant to lose a lot of money on several unnecessary drivers (generally unreliable) providers!

  U500 is old piece of hardware and not supported for Win10, right?

  In any case, what is the status in Device Manager? Is ODD listed here or you just entered with device "unknown"?

• Receive emails "there is a technical problem. Try again"fails after after many attempts to open.

  Two problems: -.
  1. certain emails receive State "there is a technical problem. Try again"fails after after many attempts to open.

  2. I get Emails with Photos as attachments or a text document. When I send teas on friends the recipient says - no image received

  7 Windows Yes uses customer access to Emails
  Provider is TalkTalk

  
  What client? If WLMail, ask here.
   
  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• Microsoft wireless intellimouse 3000A failed after 3 months, two within an hour and a third a week more later all computers portable differnent

  I bought 4 intellimouse to 4 laptops.  After the failure of 3 1/2 month three of appoximately transceivers, quite warm to the touch you can not hold them as if a diode were burned.  Two of the transceivers has no less one hour of each other and the other a week later.  The first sign was an on-screen error message (windows 7) that a usb driver failed after detecting a device.  Did I just get a bad batch of peripheral mouse (Best Buy in Auburn, ME)?  Only one of the original devices 4 still works.  We have replaced the three different failed with wireless mouse devices and they worked.

  Hello JohnMCronin,

  These mice come with a warranty. I suggest you contact the Microsoft warranty service to help you with this. You can consult the manual for more information on this warranty. Here is a link you can follow and which will give you information about this:

  http://www.Microsoft.com/hardware/warranties.mspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• Computer Acer laptop failed after Vista SP1 update

  original title: computer Acer laptop failed after Vista SP1 update - help!

  I accepted an update from Microsoft for Vista SP1 on my Acer 5920 laptop. After re-boot to complete the update, the Acer is no longer wakes up. What happened and how I can fix itplease?

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• communication manager fails after installing vista 64 sp1__

  communication manager fails after installing the vista 64 sp1. If I try to uninstall the sp that the entire system crashes

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• FireSight/User Agent Error: [2201] - login information from IP to IP report failed after TIME [a call to SSPI failed, see inner exception.]

  We have a system of FireSight with a version 5.4.0.5 Virtual Data Center and several ASA devices. We have set some user Agents for the session and closing of session servers MS AD user logon information and met 2 problems:

  (1) all servers user agent (Windows server 2008R2/64/SP1 and Windows server 2012R2) report error 2201. They can pull the AD server logon information correctly and export the correct user card, can communicate with the virtual data center, but just cannot send data to it. Meanwhile, a user on the Windows 2008 STD/SP2 Server Agent works perfectly. Have you tried 3 other servers, 2 versions of the User Agent, en - us locale and 2 versions of .net. Nothing has changed.

  (2) we prefer to have only 1 User Agent but 1 User Agent supports 5 servers DC Max. We set up a central AD server to register the security logs of all servers of ads with success to his 'Reported events' event log file and set the User Agent to extract data from this central AD server. User Agent shoots the opening session, but only events folder "Windows Logs - security", never "reported events." The User Agent is designed from "Windows Logs - Security" read-only?

  2201.gif

  

  [2201] - report of the login information of the USER-AGENT-SERVER to 10.xx.xx.xx failed after the 14/07/2016 09:08:55. [A call to the SSPI failed, see inner exception.].

  This problem is known.

  Please uninstall the update from Microsoft

  KB3161606 and KB3161608

  After inspection, the question seems to be a specific change to the default Cipher Suites:

  https://support.Microsoft.com/en-us/KB/3161639

  There is created for this bug.

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCva32331

  Rate if helps.

  Yogesh

• fqdn ping fails after recovery from sleep mode

  client system is win7 64 bit

  Server DSN is isc bind 9.7 works on win 7 64 bit

  local system of fqdn ping fails after recovery from sleep mode.

  I do not think that the ping never hits the network.

  Nslookup of full domain name or name of the system only exists.

  the system name ping only succeeds.

  then after ipconfig/release, ipconfig / renew, successor to ping the domain name full local system.

  someone at - it thoughts or ideas?

  Hello

  From the description of the problem, it seems that your computer is on a domain. I suggest you post the same question on the link below. The link given below is link TechNet Support for Windows 7. The question facing you is best for TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Feel free to write us if you have any other issues related to Windows.

• Windows Activation failed after years of work

  Hello.

  I bought my laptop 3 years ago. There were license version installed Windows (all stickers have been in their place). Over the years I did the regular system updates. I did re-install Windows. Has no repair of the laptop. ' ' But 23.12.12 after the regular update of the system told me that my version of Windows is not allowed - my product key "is used on another laptop or has been blocked by Microsoft. When I tried to enter the key again (as suggested by web page), he said that the key was not for Windows 7 Max.

  Sorry for the quotes - Windows is in Russian.

  This seems to be the code for Win 7 Pro, as expected - that explains why the system does not accept the key.

  The probability is that the vondor deliberately obfuscated Version/edition data, knowing that they would be missing for a long time until the system has shown as non-authentique, and that they would get a higher price for a ultimate a Pro machine.

  Or maybe someone has tried to apply an Express upgrade to ultimate using the stolen key.

  In both cases, the necessary of Loader fails after an update (possibly SP1) removed some of its changes.

  You will either need to reformat and reinstall Pro, or purchase a license full for Windows7 and exchange the key in (I could not recommend trying a direct upgrade to Win8 without knowing a lot more on the system)

• ODI-1226: Error_log_procedure step fails after 1 attempt. ODI-1232: the execution of the procedure error_log_procedure failed. ODI-1246: the logical schema has not been defined for error_log_procedure.

  I created a procedure running during the mapping fails but I am facing this error

  ODI-1226: Error_log_procedure step fails after 1 attempt.

  ODI-1232: the execution of the procedure error_log_procedure failed.

  ODI-1246: the logical schema has not been defined for error_log_procedure.

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.getCollectDwgConnectConnection(AbstractSessionTask.java:754)

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.getCollectDwgConnectConnection(AbstractSessionTask.java:730)

  at oracle.odi.runtime.agent.execution.SessionTask.getExecutor(SessionTask.java:239)

  at oracle.odi.runtime.agent.execution.SessionTask.processTask(SessionTask.java:152)

  at oracle.odi.runtime.agent.execution.SessionTask.doExecuteTask(SessionTask.java:111)

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.execute(AbstractSessionTask.java:864)

  to oracle.odi.runtime.agent.execution.SessionExecutor$ SerialTrain.runTasks (SessionExecutor.java:2024)

  at oracle.odi.runtime.agent.execution.SessionExecutor.executeSession(SessionExecutor.java:562)

  to oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor$ 1.doAction(TaskExecutorAgentRequestProcessor.java:718)

  to oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor$ 1.doAction(TaskExecutorAgentRequestProcessor.java:611)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:203)

  at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doProcessStartAgentTask(TaskExecutorAgentRequestProcessor.java:800)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 1400 (StartSessRequestProcessor.java:74)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:702)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:180)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:108)

  to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:471)

  at oracle.odi.runtime.agent.execution.job.OdiJob.call(OdiJob.java:73)

  at oracle.odi.runtime.agent.execution.job.OdiJob.call(OdiJob.java:73)

  at java.util.concurrent.FutureTask.run(FutureTask.java:262)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615)

  at java.lang.Thread.run(Thread.java:724)

  Navigate to the ODI object with the name error_log_procedure , which I assume is an ODI procedure. On the target tab (and if this source) make sure that you have specified a logical schema in the appropriate drop-down box

• Ping IP of ESXi host fails after reboot? Newbie

  VMWare ESXi 4.0.0 ReleaseBuild 171294 - HP ProLiant DL360 G4

  The server turned craps so we got a used that even make and model and shared disks.  Now we cannot connect with the customer and we cannot ping, ping times out.  When we ping from the console we get inconsistent results, can ping ok, the first IP addy and then fails on the second ping, or it connects to the second IP addy, but fails to ping first that it resolve the hostname constantly.  We stopped and started the management network and Management Agents a couple of times but no joy.

  I have the Articles KB 1008446 ping to the ESXi host IP fails after reboot, 1003490 restart the Management Agents on an ESX or ESXi Server and 1003677 Tech Support Mode of emergency support.

  What must we do to recover the server to an operational state? If there is other information needed to help us please let me know.

  And, what distro and version is ESXi 4.0.0 inspires?  I read that it is Redhat, but I couldn't find the version.

  I have worked with Soloris, Linux and Aix over the years, so I am comfortable working from the cmd line if need be.

  Thank you

  ESXi is not Linux. The VMkernel is VMware. The small console that runs the VMkernel is busybox. ESX has a VM management based on RedHat 5, but here again the VMkernel is all VMware.

  I would check that the embedded NICs are working properly. Start with a linux rescue disk and test.

  If all extracted would reset the system configuration from the yellow Console screen. Your configuration will be lost, but your machines virtual etc. will be OK. You will need to add to the inventory.

• Navigation fails after validation

  Hello
  
  I built a form in which I have several tabs (Web tab).
  Different tabs referring to different blocks.
  I use trigger when-tab-page-changed to navigate from one tab to another using go_item('Block.item').
  It works very well.
  
  However, even navigation fails after the update on one of the block or after saving changes to one of the tab.
  Is it possible to find out why go_item() is a failure?
  
  Thank you

  Is your default go_item, or it goes to an element on a page of tabs that is not the topmost_tab_page?