J5780 All in one – "no scan options" message.

Similar Questions

• HP OfficeJet J5780 all-in-One not Scan under Vista 64-bit

  I have brand new HP Pavillion Dual Core processor and 6 concerts computer memory, so I know that my computer is OK.

  I have a computer set up to Dual Boot Windows Vista Home Premium 64 Bit & Ubuntu Linux.

  Under Linux, the printer will print & scan (both)

  In Vista, it prints only

  My wife has Windows XP on his computer & it prints & Scans

  We come to the rear USB cable & before printing on computers.

  I have downloaded the latest drivers & critical updates & installed Vista without result.

  It will not even scan directly from the printer.

  On the printer, it says:

  No scan option, don't refer to the device Documentation. ???

   

  I know the printer is about 2 to 3 years, but it still works except scan!

   

  Please help, thanks in advance

  It is fixed after reading the HP Help Pages

  To scan in Vista... You MUST do it in paint or Windows Photo Gallery.

  Hope this helps someone

• Photosmart C7250 all-in-one no scan option.

  In a previous answer in the forum, it was stated that the installation of the software is incomplete. The analysis of the computer option has worked previously. Where can I get the software? The original disc has not returned to me after work on the computer and the technician who had to cease their activities.

  Hello

  May I know what is the operating system.

  The software can be downloaded from the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lc = in & product = 3204785 & task = &

• HP Officejet J5780 all-in-One printing backwards!

  Hello!

  I have a HP Officejet J5780 all-in-one and had no problems at all since I bought it 15 or 16 months ago.

  However, a strange thing is happening out of the blue - today, everything that I try to print print back - very odd!

  Clues as to what this may be? Maybe a virus?

  I checked all the print settings and they are as they are normally.

  Any help you can lend is appreciated, I should use the printer this weekend!

  Thank you!

  woo2u2

  This problem may occur if you installed Windows XP SP3 recently. If you go to one of the tabs under printing options, you will have an option named "Mirror Printing" or "Mirror Image". try turning it off. I think it's under the "Advanced" tab

• HP Officejet J5780 All in one will not scan

  My HP Officejet 5780 all-in can't scan it copy, fax, print, but has an error on scanning then someone please help me.

  Hello

  1. What is the accurate and complete error message you get?
  2. do you and changes to the computer before the show?

  If you are using HP software to scan, I suggest you try the steps from the following link:

  I can't scan in Windows using the HP software
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02661093&LC=en&DLC=en&cc=us&product=3301296#n56

• How can 7520 all-in-one, I scan to a pdf file?

  I just got a 7520 all-in-one and want to scan documents to pdf format, but the only choices I'm given are all images. I'm doing something wrong?

  hstn9,

  Welcome to the Forum of discussion Forum HP printer.

  Install the Photosmart software 7520 full functionality on your computer to the printer.

  General instructions to install the printer software

  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.
  • Enter your operating system from the menu drop-down
  • Click NEXT and scroll down
  • Find the category driver - software product installation
  • Select the base driver, e-print, or a full features software
  • Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  Next:

  • If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  ·

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  ·  On the bottom half of the main Web page for your printer, you can find useful to help with the installation videos.

  ·  Scroll through the list of videos back until you find the video that best fits your situation.

  ·         If you use a USB connection: download and install the driver software before connecting a USB cable.

  ·         Ethernet: If the printer supports Ethernet, you can connect the printer to the network (and assign the printer an IP address for the router, if you wish).  Once the printer is connected to the network, make sure that the printer is turned on, and then install the printer software.

  • Once the initial installation is complete and functional, don't forget to check and install the relevant updates - check the category - updated

  There is valuable information about the Web site, including manuals, how-to pages and alerts for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Start the wizard printer (program for the centre of alternatives):

  Windows key + R (open the command run) >

  Paste this line:

  'C:\Program HP HP Photosmart 7520 7520 Photosmart series.exe series\Bin\HP' - UDCDevicePage to start

  Opens the Printer Wizard > select "scan a Photo Document or ' > select 'Scan to File."

  The chart in the example:

  

  At the bottom of the "HP Scan" menu, you'd like to put in place a shortcut customized for your scan options - the shortcut contains the parameters for the analysis you select and then appear at the bottom of the list of available scan options.

  Create Shortcut Wizard for the printer on your desktop:

  • Right click on a clear view of your desktop > new > shortcut
  • Select the location (command) for your new shortcut:

  'C:\Program HP HP Photosmart 7520 7520 Photosmart series.exe series\Bin\HP' - UDCDevicePage to start

  • Type a name for the shortcut, for example, 7520 Assistant

  NOTES:

  -Argument from the beginning at the end of the command line keeps the wizard from the ePrint on your browser Web page.

  Once the new shortcut is created, you can right click on it > properties > change icon

  When you select "Change icon" you might see an error message indicating there is no icon for the shortcut - continue on and select from your personal collection or choose an icon from those provided by the system.

  ==========================================================================================

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• HP5643: HP 5643 All in One - how scan you multiple pages

  I can scan my wireless printer unique pages, but for the life of me I can't understand how to scan multiple pages.   I read the other posts on other threads on by clicking on the sign (+) sign to the left of the display after scanning one page, but I don't have a (+) sign to click on.  Someone has this model of printer, that can help me?    Thanks in advance for your help.

  In addition, any way to speed up the scanning process?     My old printer could easily scan a 10 page document in time, that it takes to scan a single page.

  @TXXpress

  Assuming for now your printer to provide the "Document Scan" and the little "+" feature, you don't have to have the "Preview Scan" selected.

  See:

  Scan_Multiple_Documents-combined

  If all else fails, you can try to use a different program to scan multiple pages into a single document.

  Options of the digitization program

  I don't have the same printer model - I can't comment properly on scan "slow".

  • In general, the printers to "do a bit of everything" cheaper still not 'all' as well as more expensive printers, a full service.

  Other things that could cause a "slower than ideal: sweep

  • Wireless, if they are available and used to connect the printer, may cause slow response - which can be attributed to anything between a bad router and a bad signal for a slow wireless card in the printer or the computer.  The answer "slower than snail" may be caused by the network is too busy with other wireless / network diagram.

  Finally, the "so slow I want to die" may be caused by the printing software - programs sometimes even 'good' can develop problems just hanging out on the computer for awhile.  You can remove the program from the printer and then replace it with a new copy of the software service Support full page for the Web site of your printer.

  Printer: printer e-all-in-one HP ENVY 5643

  Full software features:

  File name: EN5640_117.exe

• HP Photosmart C4280 all-in-one no scan

  Although my printer works fine for printing and copying, I get error messages when I try to scan by pressing the button or by using the HP software

  I use the HP Photosmart C4280 all-in-one with a MacBook OSX 10.5.7 running

  I connect to the printer with a USB cable and have used the two USB ports to make sure that this isn't a wobbly port.

  When I push the scan from the printer button, HPScan starts, then an error message is displayed: The HP Communications Application does not run.
  When I run ScanPro the following error message: Sorry, scanner could not be initialized.

  I already downloaded and installed the latest printer driver.

  Any help would be greatly appreciated. My latest project continues upward while I try to scan to run.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• PSC 1350 printer all-in-one: the "scan" button is grayed out.

  I'm looking for just a simple answer to this.

  My 1350 all-in-one (an old model by the way) has all of a sudden the "scan" button grayed out

  He shows me the overview of the analysis, but it does not scan.

  I used this computer and the printer together for many years.

  This isn't a device, just a regular connection.

  Frustrating.

  Hello

  Or select an area on the preview of the scan with the mouse or uncheck the custom size option and choose the required scan size, then you will be provided with the opportunity to complete the scan.

  Kind regards

  Shlomi

• Unable to print - Officejet J5780 all-in-One, connected to the laptop USB

  I bought a HP all-in-one Officejet J5780 in 2008 and all this year I started having problems printing. I am a student online so I need to print assignment or documents related to the class of my laptop, or make other personal business which involves an impression. I connect the printer to my laptop with a USB port. I have Windows 7 Edition home premium on my laptop. When I bought the printer, I used it with another laptop with Vista. Last year, I bought a laptop.

  I'm going to open a document, click on print, a box will appear as if sending information to the printer, and then nothing happens. The file is located in the print queue whose status is empty. Sometimes stop the printer and re - start, it would start printing once reconnected. But no more. Sometimes if I start my printer first, let it sit, start my laptop, let it sit a bit, connect the USB cable, let them rest a bit, then try to print it will work. But it is rare now. Sometimes if I am performing a repair online it suddenly started working. But it becomes harder and harder.

  I guess I need to new drivers or something, but I don't know which ones to download from HP. This new laptop does not recognize the printer software disk came with.

  I try to start printing HP and doctor Scan and it detects my printer at the start, but at the next step, it does not, said that it can not be connected. I can print an alignment page or test page.

  Or is it time for a new printer?

  I know that is not the USB port on the laptop, because I used the plug with other types of USB cables and everything works. I was wondering if the printer USB cable is bad or corroded the output on the printer itself. I bought a new USB cable and tried. The printer has been detected, updated drivers, and until now it works fine.

• Photosmart C6188 all-in-one not scan on the mac with OS 10.6.1

  I just bought a new mac with snow leopard and incapable of having the C6188 HP photosmart all in one analysis images on mac.

  I made the mistake of installing the original software which is come with the printer, and then discovered that it does not get. So I uninstalled the software and performed an update to the Apple software.

  I tried according to your publications/announcement about the leopard snow, preferably using system preferences and applications of image capture.  I can print all right, but unable to scan images on mac.  I get the error message is ' year error occurred while communicating with the scanner.  It's the same message that I get from all three applications (preferably, preferences system and capture image).

  A big thank you to all who can help...

  I'm glad it's working for you now.  Multiple page in one file is a driver problem.  Sorry, you will need to wait for an update.

  In the meantime, it is very easy to combine pages in a file (pdf) with preview.

• HP Photosmart C6280 all-in-One: receives the error message, oxc05d0082, motor pump at a standstill. I have a C6280.

  Screen error bedxc05doo82, engine of the pump at a standstill.  Press the icon (inability to recognize or describe).   How to fix it, or can I still fix this?

  Hello @Munga,

  Welcome to the forums of HP.

  I understand that you have found an error ' 0xc... "on your printer.

  I would like to help.

  Try to go through the following document.

  ' Printers HP - "Problem with print head", "printer failure," 'Ink system failure,' or a ' 0 x ' r a 'C2 '.... "Displays Error Message

  On the off chance that you meant 'choose the motor at a standstill', please see the following document.

  HP all-in-One printers - 'Out of Paper' error and the printer is not get paper

  If you need other assistance please let me know.

• Photosmart 5510 all-in-one: chromebook, scanning, multiple pages

  Several pages on a chromebook scanning is not possible, it seems. I use webscan but installation that only allows you to save a page at a time. I then use PDF love to combine the files, and although it works well there must be an easier way. Is there another brand or model All In ONE that will make a go?

  Hello Automec,
  
  Welcome to the Forums of HP Support!

  I see that you are looking for a more easy why scan multiple page. PDF with the 5510 and a Chromebook. The way you do it is the best, because the Chromebook isn't any software which can be installed for the printer. Here I had a way, but if you find one, let me know.

• 27n190st Pavilion: Pavilion all-in-one with SSD option?

  Hello:

  27 all-in-one is expandable to a 500 GB solid State Drive? I know it's not expandable customizable Web site, but if I buy it can I update? I want to just make sure there is room and no other potential problems with an upgrade.

  Thank you.

  Dobe12 wrote:

  Hi old_geekster:

  I've owned a touch in the past. I work with pictures and as power to swipe from one photo to another. It is much easier to use a mouse. I love being able to pinch also enlarge the photos and text.  This makes a lot of sense.  I didn't want to be curious, just any other interested is the motivation for the purchase of a certain model of computer.  I agree.  I have a laptop HP game Omen.  It has a touch screen, a trackpad.  I use a mouse without a wire with her, too.  It is perfect for viewing photos and anything else.

  It is interesting that envy all in a series allows an upgrade to an SSD. Is there a difference with this series first to those vs the Pavilion?  I don't know why this is, except HP emits different models for all price ranges.

  If it is not expandable, I guess that I would buy a pc because I really like the idea of an SSD. A technician at HP would know?  This is your best option.  I would contact the Service HP customer for using the upgrade information before buy you.  This will ensure I hope you don't buy something that you don't like.

  Thank you

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP ENVY 5530 All in One: what "Scan by means of the computer?"

  I use Windows 10, 64-bit and I have a wireless hp envy 5530 all in one printer on my network.

  I do not understand what "Scan to Computer" means... does that mean I can scan a web page and send it to my computer, it means scan a document and send it to my computer or that mean both?

  Thank you

  Dino

  Hello

  Thank you for using the HP Forums.

  Scan of the computer means "scan a document and send it to my computer.

  You will need to install the FULL features software and activate it before you can use.

  How to scan to computer

  Once you have installed the software:

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)

  Scan to computer

  Hope that helps!