Jabberguest delay compensation appeal

Similar Questions

• Sync module NI 9205 with NOR-9234

  Hello

  I have a cDAQ-9178 chassis with 4 x accelerometers IEPE PCB 16 absorbent of NOR-9234 (DSA). I have a NOR-9205 I intend to use to acquire the power of 4 problems. The NI - 9234 s are synchronized through their extensions in a single task. I would add the NOR-9205 to the chassis and synchronize it with the NOR - 9234 s. I have the following questions:

  1. Calendar synchronization

  How to properly START and the NOR-9205 CLOCK synchronization with the NOR - 9234 s? PXI I export the master St DSA. WHICH device (OR-9234 or NOR-9205) should export WHICH signals to WHOM?

  2. even or parallel task

  Since I produce a TDMS file in its task of NOR - 9234, it would be nice if I could simply to ADD the OR-9205 to this task to develop this unique TDMS with extra 4 channels of the NOR-9205 file. Is this possible?

  Thanks in advance,

  Hi golubovski,

  > Are you saying my task of canal expansion can fire them OR - s and NEITHER-9205 9234 with its 32 channels of multuplexed HAVE? How to recognize which modules can be combined in this way convinient?

  Yes. With the cDAQ-9178, any set of AI modules can be included in the same task and in most cases that apply to the AO and DIO as well, but you cannot mix a, AO and DIO in the same spot. The NOR cDAQ-917 x manual goes into more details on what combinations of modules, the types of channels and the tasks are possible.

  > I am aware since I worked so far with the PXI - 4472 DSAS. How well can correlate between the NI 9234 - and the NI9205?

  Well, I wanted to make sure that you did not know that it is something that you'll probably need to take into account. On the top of my head, I don't know the answer to this question.

  > As far as I know, in which case I use dummy DAQ with the NOR - 9234 to offset 40 clock cycles I guess I'll need to separate the tasks - how to integrate viewers into a single stream of TDMS?

  If you use two separate tasks and you are using the built-in support of DAQmx for TDMS logging, then you will get flow TDMS separated for each task. Note that a dummy read will still record to the PDM file, then maybe it will not work in your case.

  If you use the TDMS API to write to the PDM file, you can do the preliminary processing of data before it is written in a single stream, but there is some trade-off between ease of use and efficiency: either you write data point floating in the file (easier but less effective), or you have to deal with scaling (most effective raw data (, but harder to do).

  Another approach is to put all the modules in the same task and compensate for the delay of the filter after reading the data from the PDM file.

  > Also, for fixed 3.2 µs I have to calculate how many cycles given the actual sampling frequency or is there another method?

  If you filter delay compensation by removing a whole number of data samples, then Yes. However, there are other methods of data processing that can compensate for a number that is not part of the sample clock periods. I don't have a recommendation, but maybe someone else does?

  Brad

• AA CS 5.5 there clearing time?

  AA CS 5.5 have delay compensation, or will there be any questions about latency?

  Thank you

  Steve

  It checked recently - Yes he delay compensation.

• Text flow create a delay when an overflow creates a new page, which prevents you from reading the page number, in error

  Hi all!

  I create a script to automatically generate a catalogue of photos; the idea is to prepare a master document with a text block in the master full of self flowing, then insert images with their legend by the script, let the system automatically creates the following pages when necessary, by a single stream of text.

  My catalog is divided into sections, each represented by a different master spread; So I know what page I work when the script put there a picture just to link the current page in the master spread appropriate.

  To simplify what I got most of my script here, using text instead of images:

  / * load a master document, only containing a block of empty text in the master spread, connected to the main text stream * /

  var doc = app.open (new File("~/Desktop/mySampleDoc.indd"));

  / * I'm working on the story, thinking that every time that the textframe of first page will be full, we will create another block of text on the next page (automatically created) * /

  var history = doc.pages [0] .textFrames [0] .parentStory;

  / * now, I put a few lines of text in history, pending the creation of a new on the first page will be complete * /

  for (var i = 0; i < 100; i ++) {}

  / * This is the following line: * /.

  .silence story.insertionPoints [-1] = "This is line n." + i + "\r";

  / * here, I want to know what page is the line just created (the error is generated here just in the creation of the new page + block of text) */

  Thispage = story.insertionPoints [-1] .parentTextFrames [0].parentPage.documentOffset;

  / * and now I print the page number * /.

  story.insertionPoints.item(-1).contents = "current page:"+ thispage + "\r"; ".

  }

  The big problem is: when the first block of text is full and overflow is generated, a new page with a new block of text from the main text flow (as the master spread) is generated. but it seems my script requests the page number before the new page with the new text block is born and an error is given.

  It seems that the script goes too fast regarding the creation of the new page.

  If I remove the line thispage = story.insertionPoints [-1] .parentTextFrames [0].parentPage.documentOffset; everything is ok.

  I tried to introduce a delay up to 3 seconds with no effect.

  I tried also to view or zoom in the request of page number, thought new page to force the system to wait for the page is truly born, also without effect (by the way, I wasn't able to view the page in adding the script of the text!).

  Can someone help me?

  A big thank you to everyone

  Roberto

  Have you tried using myDoc.recompose () before the application for compensation?

• Wait the response Message to start the Compensation Plan

  Hi all
  
  I implement a plan of the orchestration of a product, all the functions involved running a process and think that the process has an automated task and this task has a first automator to send a message to a jms queue in WebLogic using the sender of Xquery, and the same automated task has a second automator to receive a response to the request message using a receiver Xquey Automator type of external events.
  
  When the order arrives at the automated task, send a message and waits for the response with the same correlation request ID and process this response to continue to the next activity.
  
  If the process comes to the automated task and send a request message and while waiting for the response arrives an amendment to this order, this amendment is not started until the automated task response message arrives.
  
  Could I start the amendment without waiting the answer comes of the automated task that is currently running process?
  
  
  Thanks again.
  
  AndresG.

  This behavior is controlled by the order lifecycle policy. Life cycle policy order control States authorized order, their transactions to move between States of command, all conditions or roles for these transactions and grace periods for certain order state transitions. For the behavior you want, you must change the default delay setting (the default is to wait indefinitely as the tasks to be performed).

  Specifically, you want to look in control policy, under the State of advancement in State is the change of the process transaction and the tab of the period of grace on the right. This is the operation that controls the State of ongoing change to change an accepted amendment. You can change the duration of waiting indefinitely for a period of time, of a certain value not zero to give him some time to receive the response and complete its work, which is also a known state for the task, or you could it to zero, which will process the amendment immediately and not wait for a response to all your external receiver process and complete the order.

  To decide how to use the grace period settings, it is important to understand that the MSO considers only the tasks completed in its compensation plan for the amendments and all the tasks that are in a State accepted (as yours would be after the message was sent to the external system) at the expiration of the grace period are not considered as completed and therefore are not considered in the compensation plan. This means that these tasks will be performed again (mode of) once the order comes from the state change and return to a State in course, as long as the order remains on the same path in the process after compensation. You'll want to think that in the establishment of your grace period.

  Marc

• How can I delay send SMS in IOS10.0.2?

  How can I delay the sending of SMS in IOS 10.0.2?

  Don't hit the Send button until you are ready to send it...

• Possible to delay the login items?

  Implementation of Adobe to open the connection software has created more problems than it is worth. I use Photoshop, Bridge, first and every day hearing as part of the same project, all related. I thought I would put them in place to open the connection, to save time.

  However, the location of the Cache for all download and also the folder for my Google Backup Drive, on an external drive, and if it is not present when the software tries to open, things go haywire.

  Is it possible to delay the opening of the connection points, by, say, 10 seconds?

  No, it's on or off only, there may be a 3rd party app that can do it, but you will need to check the app store.

• very long delay before printing

  My MacBook Pro is around the age of 18 months. It is updated at El Capitan.

  Maybe a week or two ago, my printer stopped printing normally. I bought the printer at the same time as the Mac. It's a HP Officejet 8610. It is connected with a time capsule wireless newish.

  When I select print, a normal icon on the dock. Opening it displays a message to printer, printer not connected. I fought with him for half an hour or more, then give up in disgust and head to do other things. When I return to my office, there is the impression.

  I deleted the printer in system preferences, then reinstalled. I have reset the airport utility. I turned the printer on and outside.

  I believe the delay between the choice of printing and when the printer starts his work about half an hour.

  Open system preferences > printers and Scanners and then select the print tab then check or right on the printer on the left then click: reset the printing system

  Then try to print.

• There is Airfoil and Airport Express, latency/delay time?

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  But the audio output should be "real time." in other words, no delay or latency at all. Both are in the same room!

  I use notation software (Sibelius) and need to hear what I write immediately. Unlike streaming where I think there is an acceptable delay (2 seconds?) for the buffering?

  Is this possible please?

  If it isn't with AirFoil, any advice on how welcome :-)

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  With AirPlay (or Bluetooth), there will always be a form of delay or latency with streaming audio.

  In this scenario, an audio stream (on AirPlay) will go first to your iMac to AirPort Extreme and AirPort Express Terminal.

  To help understand why there will be delays, let's look at high-level "behind the scenes" about how works AirPlay:

  For the AirPort Express (AX), audio input is provided mainly by iTunes. Of course, it can also get feedback from other sources as you know, as of Rogue Amoeba's Airfoil.

  For streaming, iTunes or wing does most of the work. What is app reads audio content standard (AAC, MP3, audio books, Internet music streams, etc., it decompresses these file formats and creates what is essentially a raw, uncompressed audio stream.) This stream is compressed using Lossless Compression of Apple (via a QuickTime codec), encrypted with AES 128 bits and then listened (airplay) with an AXE. The stream is buffered for about 2 seconds until the stream is sent. The AX deciphers the flow, decodes and exports in a digital or analog PCM (using a built-in DAC) flows to its audio analog-to-digital versatile optical port.

  So, with the above, you can see that the tone does not simply move source to the destination without much more things. You will not be able to entirely eliminate the delay. Sorry!

• Office 2013 on Win7 using bootcamp has delay time

  I use Win 7 teacher on a piece of Macbook Air 2014 with bootcamp 5 and MS Office 2013. Up to 4 weeks everything works well, and the performance was great. And then I got the delay time:

  -Closing remarks is the longest in about 4-5 sec

  -editig one Excel cell and switch to another will cost about 4 to 5 sec

  - and so on

  Thanks to this performance, it is horrible to work. I have also removed Office and install it again without any result.

  Anyone have some advice for me? Is there some patches in which software never cause this?

  Or am I alone with this?

  THX in advance

  Frank

  Your is no longer in a Mac environment, if this side of "windows" because you're not virtualize, you run Windows as a complete solution for Windows. OS X doesn't play not any part of your experience. Windows as OS X should be updated with patches and update securities, the latter is the only support Windows offers for Version 7, it is out of development and was removed by Microsoft for more than a year. All compatibility fixes should come from Microsoft, see microsoft.com for the availability of these.

  Outside the correction and the issues pourraient be caused by:

  Disk fragmentation that is common in windows. (However it is not under OS X, don't defrag on Mac, OS updates will do everything if it you better than anything you can buy)

  hard disk-ragmenting https://support.Microsoft.com/en-us/help/17126/Windows-7-improve-performance-def

  Font management (again, on the side of 'Windows', your OS X fonts do not play in this)

  3rd party Windows applications, such as anti-virus and the litany of bloatware inherent with Windows. Windows has a startup mode for troubleshooting.

  https://support.Microsoft.com/en-us/help/17419/Windows-7-Advanced-startup-option s-safe-mode

  and possibly disk goes wrong, which can be controlled using this method

  https://support.Microsoft.com/en-us/KB/2641432

• Follow-up of applications for security delays

  When you use the private mode on http://www.lensbest.de/ with activated protection of follow-up, most of the requests are delayed by 1 to 2 seconds. Loading animation is not present in this time interval. For example, the links in the menu and in the footer are affected by the problem.
  If I disable the protection followed in the address bar, the delay goes away.

  I found the problem in Firefox 42. Firefox to reset to the default values and creating a new profile didn't help.

  I can do something on the server to resolve this problem?

  h.Klaus said

  When you use the private mode on http://www.lensbest.de/ with activated protection of follow-up, most of the requests are delayed by 1 to 2 seconds. Loading animation is not present in this time interval. For example, the links in the menu and in the footer are affected by the problem.
  If I disable the protection followed in the address bar, the delay goes away.

  I found the problem in Firefox 42. Firefox to reset to the default values and creating a new profile didn't help.

  I can do something on the server to resolve this problem?

  Could be closed. The problem was caused by a Timeout of Google Tag Manager.

• Is currently plagued by the same problems as a Firefox verion it is - delayed tab swtiching paint, etc. of Thunderbird?

  You know, sometimes I'll go to the Lightning Calendar tab and he painted nothing, but I'll move my mouse and to color elements such as the individual calendar days. Very weird, but I know that Firefox has recently set it exactly the same problem of what they see as a 'condition' (see bugzilla #1067470)

  I have the "TT DeepDark" theme but I have confirmed that the problem is still present on the default theme as well.

  (Delayed) Update: looks like to me that this has been resolved in silence with the version 38.1.0, released July 9, 2015. Initially, I thought it was a question of OC with my gpu, but after additional testing, which was not the case.

• How to delay delivery of a message

  Y at - it an option to write a message and press 'send', but delivery delayed until some predefined time, as I do in Outlook?

  Go to the Add-ons page add and search for send later. It allows you to program the sending times.

• delay connection remote control Apple tv siri after reboot

  Hi, when I restart my apple tv, remote siri doesn't respond for like 1 minute

  does anyone have this problem on reboot?

  Once my remote siri has not connect after reboot and I had to unplug my apple tv so she reconnected

  Please can someone he try on his apple tv 4, to check if there is a delay in the remote siri connection after restart of the apple tv

  Thank you

  Probably for about 10-15 seconds here.

• Hello, after installing the latest upgrades have Jutters screen, keyboard delay of response.

  Menus from sites web drop-down flash and go sometimes black. In all sites, the keyboard responses are delayed. Never had this with previous versions.

  Hello

  You use the 33.0.1 version? Users who have experienced the black screen using the 33 version.

  You can download 33.0.1 from:

  • https://www.Mozilla.org/en-us/Firefox/all/

  Alternatively, if you can see your menus:

  • Help (or

    

    >

    

    ) > about Firefox

  If this does not help, run Firefox in Mode without failure. If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  To disable hardware acceleration

  • Click the menu button

    

    then select Options.

  • In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.

  Now, quit Firefox, wait a few seconds and start normally. Sometimes the problem was caused by the old graphics drivers, so if you want to run with hardware acceleration, try to update these drivers to see if that fixes it.