very long delay before printing

Similar Questions

• Want 5530: Long delays want printing 5530 All in One

  Our printer worked beautifully for a long time.  Now, he seems to have an unusual problem.

  When print us something, there is a long delay before the start of printing.  Once printing begins, sometimes to normal speed.  I have not measured the delay to see if it is still the same amount of time.  The delay is measured in minutes.  Often I'll print something and then go do something else until I hear the printer start printing.  During the time I am waiting, responses to the ping packets very good printer.  It is suitable to the management tools and access via its web page (as long as you do not ask to print something).  That tells me that it is not a network problem.  T.He network in our House is wireless.  We tried printing from several different computers to Windows 7, and the behavior is the same.

  The version of the firmware on the printer is ORL1CN1547AR.  Updated HP says that there are no newer drivers available for my system.  I find anywhere that my computer is going to give me the version number of the installed drivers.

  I tried power cycling the printer several times.  My laptop is restarted daily.

  No idea where to go from here?

  Hi ppeters86,

  Please try printing HP and the Scan doctor for me!

  What happens if you make a copy of the glass of the scanner of the printer? You get the same type of delay? Copy of Documents or Photos.

  In the meantime, we will try to disable IPv6 on the printer to ensure that IPv4 is used by your printer and your router on your network.

  • If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it Off orDisabled.

  • If your printer does not have a display, use the built-in webserver (EWS) to disable IPv6.

    1. From a computer on your network, type the IP address of your printer in the field URL of your Internet browser.

       NOTE:

       If the Web page appears empty, try another Internet browser.

    2. Click on the network or network tab and open the section or page corresponding to your type of network: wired or wireless.

    3. Select enable IPv4 only (or similar).

       Figure: Example of IPv4 configuration

       

    4. Click on apply and wait for changes are confirmed.

    5. Try to print again.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• a long delay before video begins to play, remote only

  Hello

  My problem is that there is a long delay before that we can see the beginning of the video when connect us to the server from a long distance.

  When I connect from the same subnet, it's ok: less than 1 second.

  When I connect to a nearby location (2 km from here) the delay is 15 seconds

  When people connect to places very far away, it can be 2 minutes or sometimes the video does not play.

  y at - it a parameter to change this?

  Thanks for help.

  This Protocol is being negotiated in different places? RTMP, rtmpt, rtmpe, rtmps?

  I guess you have a proxy server or a firewall in place which prevents the default rtmp connection (using port 1935) put in place and the logical kicking of retry in and subsequently another protocol or port is finally working.

• really long delay before rendering starts?

  I have this ongoing problem (CC2014) where there is a long delay before rendering starts. Nothing fancy or heavy, no effect, MacPro/Yosemite/64 GB of ram, made to the internal SSD flash drive. Sometimes I see a 2, 3, 4, 5 minute delay before construction starts, then my comps short and simple, restore in seconds. Just AE text, shape layers and files placed. No business network, no other applications running.

  Any ideas?

  Mike

  If you use multiprocessing, turn it off & see what happens.  If the time-out period goes away, you may need to reassign your processors & memory for multiprocessing in the AE preferences.

  And it never hurts to purge the memory & cache before a final.

• My HP OfficeJet 6500 wireless printer prints slowly with very long breaks during printing...

  I saw a very old post on this but no solution so I'll try a new position.

  Also, I'm not sure I'm even barking to the top of the tree on the right.

  My PC is running Windows 7 Ultimate 64-bit and is up-to-date with all the updates.

  Recently my Officejet 6500 a more printer E710n-z began to print very slow with long breaks and, in some cases, falling output and in other cases simply do not print.  If I print the various printer and cartridge of test pages from the printer itself, they have long breaks but seem to finally print correctly.  I've been playing with that try to circumvent the problem as long as I'm not really sure print the (from the front of the printer) are always correct.

  I uninstalled the printer and all its associated and software reinstalled using the latest download available on the HP support site, but it made no difference.

  After sanding my teeth to a measure of costly troubleshooting, I bought a set of completely new and installed HP cartridges.  Once again, no difference.

  You don't know if it is a herring or not but when I printed him using both iPrint from my iPhone, as well as the HP ePrint feature email, while still having the very long pause he eventually print a text message only correctly.

  Finally, on the first time I printed the properties/test page it printed the HP, logo, displayed while the ink was drying for what seemed like a minute ago, powered form to another page, delayed for awhile and then printed broadband nonsense, form fed once again, and after another long break printed what appeared to be the upper third or the word Windows.

  Sometimes when printing from the iPhone, it will display a low ink message - even if it has a new set of cartridges HP - and sometimes the PC displays an error saying: he can't communicate with the printer.  Can I still access the printer with the function of Windows printer or HP web access so clearly the wireless network connection is still viable.

  What do you think?  This old printer a year and a half has simply turned into an opportunity to mimic the famous scene copied from office space?  Or has someone else observed or experienced this and knows how I could solve this problem?

  Thanks in advance for help you what can offer?

  Howard

  Redmond, WA

  Thank you.  The article that you included was one of the first I found when I started researching this issue.  I also found articles on other uninstallation methods, as well as to remove and clean the printhead - everything I tried.

  Only, the printer is connected to the wireless network.  The power is connected directly to a wall outlet that I follow for the level of tension and the power used.

  The problem seems to be resolved now.  If she does not return to its recalcitrant ways in a few days, I will consider this closed.

  Here's what I did...

  I was trying to uninstall from the control panel.  I noticed that when I would get the ini file, read all entries in the menu 'Start' mistake had been removed, but immediately after recognizing the error it would make it back to the starting point and put everything back the way he found.  I tried to use the Task Manager to kill msiexe point of error, but it could still roll back.

  Then, for who knows what reason, I tried running uninstall directly from the menu start.  This time, when he stopped and I killed the uninstall process, he stayed collapsed.  I then used the Fusion driver to remove any HP printer drivers that followed RevoUninstaller Pro to find and remove all files followed by CCleaner to clean the registry and associated registry entries.  I'm not advertising or advocating, these are just the tools I've used.

  After a reboot, the printer seems to be [finally] completely gone.  I installed the software again and this time it seems like it should be and [so far at least] works properly as well.  I do not think that I messed up [voluntarily] with this printer because I bought a few years ago.  I don't know what caused it, but it seems that I had several instances of competitors or software drivers in layers.

  I made a clone of the disc and then tried again to uninstall the printer.  Even if it was just after a successful installation and a reboot he would always leave with the same error "Unable to read" in the same place.  The error code in the case where the file is the same as that used by other systems for "not enough contiguous disk space.  I have 384 GB free on a 1 TB drive and Norton reorganizes the disk every week so that the error number can be a distraction, but I have yet to find something better to inform me.  What initially may also be why the restore will not complete successfully or the other.

  Ah the joys of PC ownership.  You have to wonder how many PCs get retired every year simply because the owner has not been enough tech-savvy and pay someone else's expensive with no guarantee of success.

  Sigh...

• computer laptop w very long delay Vista at startup

  laptop with Vista starts hard disk only after long delay - 10 min or more.  Boots immediately on a bootable CD.  Hard disk is defined as startup option.  Food has no effect previous restoration has no effect.

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  More troubleshooting:

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3 I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why Windows 8 have a long delay before the launch of startup programs

  In Windows 8 there is a long enough period for the launch of the programs in the startup folder or in the register as startup items. Why is this? And how can I remove or reduce the delay? Please note that this is not a problem with too many programs trying to launch. There is that one program listed on startup with a new installation of Windows 8 and the system is running on an SSD. It's so clear and deliberate, time not only a slow system.

  Reading this thread, I just want to point that Microsoft quality replies here, it's horrible, beyond and Microsoft should be embarrassed to make them like that in public. I recommend delete them all and by publishing an adequate solution.

  Reminder: The OP says that he is a clean install. They moved just a program in the startup folder and they're asking why - this delay, indicating precisely is not a slow computer. The advice they get is:

  -Run the diagnostic system

  -Start in Safe Mode

  Hello? This is a clean install! Of course, none of this assistance.

  What actually happened is that there is, as the OP stated, before advisement in Windows 8 delay as all the start-up programs are executed.

  It can be flown in the key HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize\Startupdelayinmsec in the registry (including the set to 0, then the programs are executed immediately).

  It is the response that should come from Microsoft. Everything else is a rubbish - model answers that everyone make Microsoft look green, as if they a) don't know their own product and b) don't care even clients who need assistance.

  The Bing team should also be ashamed of this site as their best result. Google does not work.

• HP LaserJet P1102W long delay between pages with narrow (4 "wide) paper stock

  I use Adobe Acrobat Reader X (on Windows XP) to print a page 100 PDF on HP P1102W, with 4 "wide x 11" long paper in the main tray.  There is a delay of approximately 15 seconds between pages.  As soon as I share the narrow paper for regular 8.5 "x 11", the printer takes the job at normal speed.  The PDF itself has a page PDF 4 "x 11" size.

  I tried implementing a custom 4 "x 11" paper size in the print preferences and setting the paper type to envelope, but nothing done.

  I tested with 5.5 "wide and 7.5" wide paper stock, and they have the same 15 second delay.  As soon as I put 8.5 "wide stock in the status bar, the printer goes back to full speed.

  Note that even with the thin paper stock, the first page of the job prints immediately.  The delay occurs between page 1 and 2, 2 and 3, etc.  So it seems strange that the printer does not have the 'calibration' delay before printing the first page, it delays only on the following pages.

• Problem with the listening Service: Long delay beginning listener, intermittent connections

  I have problems to connect to my Oracle database.  I don't know what was the cause, but now when I connect to a database that has been working well for the past two years, I usually get an ORA-12541 error.

  I run lsnrctl status on the server and get a prinout like this:

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dqaswn02) (PORT = 1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 61: unknown error
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 2: no such file or directory

  I also tried to manually stop the service through services.msc, then by restarting via lsnrctl start, but when I do this I get a very long delay (10 + minutes) before he comes back with something like:

  TNS-01153: failed to process the string: 0i ≈ ♥
  

  I'm quite lost as to what is wrong.  I've been messing around with listener.ora, but I don't see anything difficult in there.  Here's a copy:

  listener.ora # Network Configuration file: E:\app\myc0714\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = E:\app\myc0714\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:E:\app\myc0714\product\11.2.0\dbhome_1\BIN\OraClr11.dll")
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = dqaswn02) (PORT = 1521))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )

  # ADR_BASE_LISTENER = E:\app\myc0714
  LOG_FILE_LISTENER = LISTEN PORT
  TRACE_LEVEL_LISTENER = SUPPORT
  TRACE_FILE_LISTENER = LISTEN PORT

  A few times during that time, I was able to connect to the server, via sqlplus, however, it took 10 minutes before the connection is online.  Once I'm connected, I can ask my paintings as expected, but I need an application to connect.

  If anyone has any ideas on what could be the problem, please let me know.
  

  In fact, there was another thing, I changed when I finally got it works, although I don't know if it was related or not.  In my folder with my track logs, I had a huge (> 4 GB) listener.log file.  I deleted this file right before that I ran the command netsh command to reset and then restarted.  This file was also a bit special, because it had not been updated since around the time that I first encountered this problem.  It seems to be updated on a minute by minute basis, now that I've removed the old.  Is there a problem with this file becomes too big?  My drive was not out of space, but it is very curious that this stopped file update on the same day as when I started having the problem and now works properly again.  I wish I had noted the exact time until I deleted it.

  Link:

  Problem of Listener.log & #8211; large file | Obtained & #039; s Blog

• Keyboard a long delay by typing, made noise of rattling on speakers for each trait.

  I am running Windows XP on a Dell XPS 400 desktop computer. My keyboard developed a very long delay by combination of keys and would make a clicking sound on the speakers every time that a button is pressed. I used a Logitech wireless keyboard, so I changed the batteries, checked the range to the receiver, still nothing. I bought a wired keyboard USB (new Logitech), thinking that my wireless keyboard was bad. The wired keyboard does exactly the same thing. I checked keyboard settings and everything is set to the fastest setting. I have troubleshooted the device, and that it works correctly. I guess it's some kind of virus or malware, but I use McAfee and I didn't do anything. Also, I tried to do a system restore and I can get the system restore menu, but my mouse moves sporadically and the keys are unusable (it works fine everywhere else). The only command that I can navigate to with the keyboard is the RESTART button. So I can't run a system restore. Any ideas on what it is or how to get rid of?

  Hello Skico25,

  Thank you for your message.  This could be a driver problem.  Access the Web from Logitech site and download/install the latest driver for your device.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• October 11, 2011 updated catchy so long delays for IE8 and Outlook Express

  After you install Microsoft Updates on October 11, 2011, after a system reboot, Internet explore 8 and Outlook Express experience long delays before starting. During this period, the Task Manager is also locked, so I don't see what process is at the origin of the problem.

  I narrowed down it to KB2564958 or KB2592799.

  I've uninstalled and reinstalled the KB2564958 and the KB2592799 and the problem disappeared.

• Right click menu was very, very long which it wasn't before

  After upgrade to version 20, made a right-click menu got very, very long that it wasn't before. That's happened? Therefore, it is easier to use. All my Add-ons are up to date, if it's important.

  Thanks, I did check the updates also from the page modules. I have Firebug 1.11.2.

  However, now it seems that the problem has been fixed when I started Firefox in safe mode, all modules turned off, then switced on one (try to find who was, I have not), then restarted Firefox again normally: bing, returned to the normal menu.

• By clicking on the file and print preview is no longer gives a preview before printing.

  I'm used to be able to click on file, then on preview before printing. Now all of a sudden it no longer works. There is no preview before printing.

  How did the extension HP Smart Web Printing4.51 true [email protected] enabled?

  As far as I know, this extension did not work in Firefox since version 3.5 of Firefox.

  Try disabling this extension and see if print preview works.

• How to cancel the option "copy of documents before printing?

  I bought a HP Officejet Pro 8600. When I was setting it upward, I clicked an option that said I could copy all documents before printing. I would like to know how to cancel this option because delays copies my printing time and the printer pushes on a blank page between every page it prints which is rather annoying. Help, please! Thank you

  Thanks for your help! I'm fiddling around with it the other day, and in some way, I solved the problem. So it is no longer a copy before printing - success!

• After installation clean on a new processor, preview before print still crashes FF

  Print Preview worked fine on the old computer, but on the new, he always causes Firefox to crash. This happens if I use the 'Print Preview' command separate from the drop file, or use the button print in the toolbar that opens automatically in the preview. Both the old and new computers use Windows 7 as operating system. Other programs can do a preview before print very well, it's not likely to be the printer driver or the printer. Is there a solution?

  It's a problem with a component of your security software from Trend Micro for Firefox (TmBpFfCore.dll).

  Your System Details list displays the installed Trend Micro extensions, then you can try to disable those.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes