Similar Questions

• When I want to download the game (the system dll user 32. dll has been moved in memory)

  When I want to download the game (the system dll user 32. dll has been moved in memory)

  Hello

  1. do you remember any changes made on the computer before the show?

  2. What is the service pack installed on the computer?

  3. What is the exact error message you get?

  4. what game you are trying to download?

  5. when exactly you get this error message?

  6. it happens only when you download games?

  Follow the steps mentioned below and check if that helps:

  Method 1:

  Certain programs may not start, and you receive an error message on a computer that is running Windows XP Service Pack 2:

  "Unauthorized system DLL.

  http://support.Microsoft.com/kb/935448

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  Method 2:

  How to fix common mistakes of the User32.dll file

  http://support.Microsoft.com/kb/142676

  I hope this helps.

• Error "The user32.dll system DLL has been moved in memory" when you try to open certain programs.

  lllegal System 32 relocation

  DLL user32.dll system was moved in memory. The application will not work correctly. The move took place as C:\WINDOWS\system32\SHELL32.dll DLL occupied an area of address reserved for Windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL.

  When I open Google chrome, VLC Media Player, an error message show me but the program cannot play.

  Hi Rabi,

  ·         Did you recently install any update of Windows?

  You can check if this article helps.

  Certain programs may not start, and you receive an error message on a computer that is running Windows XP Service Pack 2: "unauthorized repositioning of system DLLS.

• STANDBY.wrf error Exception in thread "main" java.lang.UnsatisfiedLinkError: C:\STAF\bin\JSTAF.dll: cannot load the .dll AMD 64-bit on a 32-bit IA platform

  Hello

  I created a single mosaic and get error below in the file standby0.wrf.

  As stated in the doc, I made a 32-bit windows to watch VM and installed 32-bit staf followed by staf configurations. I have installed all critical updates for windows.

  Exception in thread "main" java.lang.UnsatisfiedLinkError: C:\STAF\bin\JSTAF.dll: cannot load the .dll AMD 64-bit on a 32-bit IA platform

  	in java.lang.ClassLoader$ NativeLibrary.load (Native Method)
  	at java.lang.ClassLoader.loadLibrary0 (unknown Source)
  	at java.lang.ClassLoader.loadLibrary (unknown Source)
  	at java.lang.Runtime.loadLibrary0 (unknown Source)
  	the impossible (unknown Source)
  	to com.ibm.staf.STAFHandle. < clinit > (STAFHandle.java:306)
  	at IdleVMTest.main (IdleVMTest.java:30)

  
  

  I enclose my test log.

  Please let me know how to fix it.

  Thank you

  Suresh

  Hi Suresh,

  In fact, the first client does not generate wrf files. Customer of the tile, client0, generates the wrf files. The first customer runs the harness and brings together the results of each client in the results file.

  The program which ensures the pings is located on client0, and he struggles to leave because of the bad number of bit Java on client0. This program writes to standby0.wrf. Your VMS Eve is probably fine.

  Rebecca

• UnsatisfiedLinkError when using berkeley db in java

  Hello
  I downloaded the Berkeley db version 5.1.19 and wanted to use java to access the db.
  However, during the construction of the subject of the environment, an exception was thrown:
  Exception in thread "main" java.lang.UnsatisfiedLinkError: E:\java\Test\libdb_java51.dll: can't find dependent libraries
  
  What should I do?
  Thank you.

  Hello

  It is covered in the Berkeley DB reference Guide, in the chapter of The Java API .
  Under Windows, you must make sure that db.jar is included in the CLASSPATH environment variable and the path to the BDB 5.1.19 dll is included in the PATH environment variable.

  Kind regards
  Andrei

• Reply to thread-> java.lang.UnsatisfiedLinkError: com.sun.media.vfw.VFWCapture.cacheFieldIDs (Z)

  java.lang.UnsatisfiedLinkError: com.sun.media.vfw.VFWCapture.cacheFieldIDs (Z)

  This issue is no answer.

  

  2827163 , December 20, 2014 12:58

  So I try to start with the java media framework (JMF). Ive installed the jmf 2.1.1e for windows and I am using eclipse IDE.

  I tried to add the jars for the projects generate path files and the DLLs for the path to the library, but I get this error when you try to run the project:

  java.lang.UnsatisfiedLinkError: com.sun.media.vfw.VFWCapture.cacheFieldIDs (Z)

  Here are the details of the full changelog:

  CaptureDeviceInfo: vfw:Microsoft WDM Image Capture (Win32): 0: vfw: / / 0

  YUV video format: = java.awt.Dimension size [width = 640, height = 480] [B yuvType = 32 StrideY = 1280 StrideUV = 1280 OffsetY = 0 OffsetU = 1 OffsetV = 3-MaxDataLength = 614400 DataType = class

  YUV video format: = java.awt.Dimension size [width = 160, height = 120] [B yuvType = 32 StrideY = 320 StrideUV = 320 OffsetY = 0 OffsetU = 1 OffsetV = 3-MaxDataLength = 38400 DataType = class

  YUV video format: = java.awt.Dimension size [width = 320, height = 240] MaxDataLength = 153600 DataType = class [B yuvType = 32 StrideY = 640 StrideUV 640 OffsetY = 0 OffsetU = 1 OffsetV = 3 =

  Exception in thread "Thread of VFW application" java.lang.UnsatisfiedLinkError: com.sun.media.vfw.VFWCapture.cacheFieldIDs (Z)

  at com.sun.media.vfw.VFWCapture.cacheFieldIDs (Native Method)

  to com.sun.media.vfw.VFWCapture. < clinit > (VFWCapture.java:27)

  at com.sun.media.protocol.vfw.VFWSourceStream.doConnect(VFWSourceStream.java:249)

  at com.sun.media.protocol.vfw.VFWSourceStream.run(VFWSourceStream.java:771)

  at java.lang.Thread.run(Thread.java:619)

  Can someone help me?

  Please place the dll files in appropriate locations. This error is generated when the Java class cannot find the required native library.

  Thank you

  Adil

• WebUtil gives no jacob in java.library.path when you try to read an Excel

  I'm trying to run an active WebUtil (10.1.2.0.2) form. The form reads data from a MS Excel 2007 sheet excellent lines. We get this error
  

   java.lang.UnsatisfiedLinkError: no jacob in java.library.path 

  When this line is executed in the code in the form.
  application: = Client_OLE2.create_obj ('Excel.Application');
  
  Unfortunately, I'm not familiar with the Java settings.
  
  Should we add in the CLASSPATH and other configuration such as formsweb.cfg and webutil.cfg files?
  
  Any help would be grately appreciated.

  Hello

  Copy the following files to...
  c:\devsuitehome_1\forms
  or to
  c:\devsuitehome_1\forms\webutil

  d2kwut60.dll
  jacob.dll
  JNIsharedstubs.dll
  

  Run the form and check...

  Sarah

• Explorer.exe restart when moving, copying or deleting files

  I have essentially the same problem as this guy: http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/explorerexe-restarts-when-moving-copying-or/3ba212a7-853b-4a7b-82aa-ae29512d6a69
  Just that my operating system is Windows 7 64 bit

  I followed what "auggy" said and did a dump of the explorer.exe user mode and that's what I got:

  This dump file is an exception of interest stored in it.
  The stored exception information are accessible via .ecxr.
  (22ec.2104): access violation - code c0000005 (first/second chance not available)
  WARNING: Unable to verify timestamp for ntdll.dll
  ERROR: Module load completed but symbols can be loaded for ntdll.dll
  WARNING: Unable to verify timestamp for KERNELBASE.dll
  ERROR: Module load completed but symbols can be loaded for KERNELBASE.dll
  ntdll + 0x5186a:
  76ea186a c3 00000000' ret

  It seems so the fault lies with ntdll.dll and KERNELBASE.dll, but now how can I fix that?
  This problem with the explorer.exe has listen to me for years, btw.

  Using WinDbg (Windows Debugger) shows the module causes the error is the DivXPropertyHandler.dl, a component of DivX:

  BUCKET_ID: X64_APPLICATION_FAULT_NULL_CLASS_PTR_READ_divxpropertyhandler+ 1951

  
  

  0:056 > lmvm DivXPropertyHandler
  start end module name
  00000000' 0f310000 00000000' 0f4f3000 DivXPropertyHandler T (no symbol)
  Loaded symbol image file: DivXPropertyHandler.dll
      Image path: C:\Program DivX DivX Media Foundation Components\DivXPropertyHandler.dll
  Image name: DivXPropertyHandler.dll
  Timestamp: Fri Sep 09 03:51:15 2013 (522D7DF3)
  CheckSum: 001E2968
  ImageSize: 001E3000
  File version: 1.0.0.76
  Product version: 1.0.0.76
  Flags of the file: 0 (mask 17)
  BONE folder: 4 unknown Win32
  File type: Unknown 0.0
  File date: 00000000.00000000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  
  

  You could try to uninstall DivX or otherwise go to the following folder:

  C:\Program DivX DivX Media Foundation components

  
  

  In this folder with the right button of the DivXPropertyHandler.dll and the DivXPropertyHandler.dll and rename it to DivXPropertyHandler.old

  Sign out and then sign in and then back again.

  
  

  
  

  
  

  
  

• Error of JAVA virtual machine when compiling for ios

  I ve created a large project on the implementation of a book.

  Applications consist of a main container (book), that loads external swf (pages).

  Each page can contain some choice of e.g.multiple activities and drag and drop exercises.

  The problem is that everything was fine with the swf external loading until the number of swf is come to a point where this error pops up.

  When I RANDOMLY remove some swf then the project compiles very well even with the AppStore deployment type.

  I tried to change the jvm.ini with higher values for the java heap memory (ex: Xmx4096m) but nothing happened.

  I even used several orders of jvm to disable garbage collection (p. ex. - XX: + DisableExplicitGC) but still the error message.

  The main swf file is 500 KB, and the current number of swf external is 130, and their total area is 50 MB is almost 400 KB each.

  I tested on different machines with 4 GB of ram and a processor i3 and the other with 6 GB of ram and a processor i7.

  I reinstalled flash and used the latest updates as well as the air 4 sdk.

  Could someone help me with this?

  Is there another way to publish the ipa file?

  Thank you.

  

  Sinious thanks for your reply.

  I tried to compile ADT and it worked using this script from the command line.

  @set java_cmd = "C:\Program Files\Common Files\Adobe\Adobe Flash CC\jre\bin\java.exe"

  @set =-Xmx8192m-jar java_param

  @

  @set adt_cmd = "C:\Program Files\Adobe\Adobe Flash CC\AIR4.0\lib\adt.jar"

  @set target = ipa-test

  @

  @set cert = samples.p12

  @set cert_pass = 12345

  @set = samples.mobileprovision provisioning

  @

  @set build_file = Testing.ipa

  @set desc_files = test - app.xml

  @set files = Testing.swf assets externalSWF

  @

  java_cmd %%d java_param % % adt_cmd %-package-target % target %-stores pkcs12-keystore % cert %-storepass % cert_pass %-supply - profile %%%d build_file %%d desc_files %%d Files% provisioning

  @

  pause

  However, there is now a different problem.

  When you try to compile more than a certain number of external SWFs (eg. 350) while the process never ends. The java.exe process consumes all of my memory, and it's just stuck there for hours (I waited so he can compile for nearly 10 hours before I killed the process java.exe). When I remove randomly some SWFs then everything is fine, and the process ends after nearly half an hour or so.

  The pc I use has a processor i7 with 16 GB of ram and the java process consumes everything, even if I set myself a limit using the - Xmx8192m command.

  Is there a problem with the xmx command?

  Do I need still more ram to compile as many sovereign wealth funds.

  Is there a way to monitor the java process in order to intercept errors that occur or may use any other java params to control ram usage limits?

  Thank you for your help.

• java.lang.UnsatisfiedLinkError: nativeSetVisible

  Hi all

  I tried to test a sample application (EmployeeDirectory) on the Android emulator, I use Adobe Flash Burrito and I exported an apk file I tested on the emulator.

  First I tried on sdk 2.2, but it failed as invalid apk, I don't understand why, since adobe air is supposed to support.

  And then I tried on 2.3 that has been successfully installed.

  But, when I try to run the application, it illustrates the exception below:

  E/AndroidRuntime (651): FATAL error: main
  E/AndroidRuntime (651): java.lang.UnsatisfiedLinkError: nativeSetVisible
  E/AndroidRuntime (651): at com.adobe.air.AndroidActivityWrapper.nativeSe
  tVisible (Native Method)

  Since I'm on emulator I do not have access to the market, so I downloaded adobe air from the internet ("AdobeAir_Runtime_Device_Froyo_20100930.apk" and "com.adobe.air.v2.5.1.1774.apk"), I tried all of them, but without success...

  Hope someone can help me, thanks in advance.

  Cleber

  There is a different version of Runtime.apk for use on an Android emulator. The AIR SDK includes the device and emulator runtime APK files. Look in the \runtimes\air\android folder in the SDK.

• Equium A100 (PSAA4E) the system DLL, user32. DLL has been moved in memory - HHCTRL.ocx

  I have a Toshiba SATELLITE A100 (PSAA4E)
  At the start of this notebook get the following message:

  "The system DLL, user32. DLL has been moved in memory.
  The application will not work correctly. The relocation occurred because the DLL C:\WINDOWS\system32\HHCTRL.ocx
  occupied an area of address reserved for windows DLL system.
  The vendor supplying the DLL should be contacted for a new DLL. »

  The audio drivers from RealTek and the latest version 5.10.0.5188
  I don't really know why it happened.
  Any help would be appreciated.
  In addition, any body knows why my voice on Skype seems to be deformed with a high noice height even if the hearing quality is correct.

  Post edited by: Landric

  Thanks for the comments
  I see you found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  The same solution was already posted in the thread suggested.

• Yoga 2 Pro - cursor flashes when moving on some programs

  I have a Yoga 2 Pro with Windows 10. Some programs (for example Thunderbird, LibreOffice), the cursor flashes when moving on the program window. I made sure my screen and touchpad drivers are up to date as well as the BIOS of my laptop. What else could be the cause? It's a bit irritating.

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Went before and refreshed; things seem to work fine now. I guess the moral is 'don't do an upgrade directly from Windows 8.1 to 10'.

• Have mutli worm of LV - 7.1 to LV10sp1 on XP PC. DAQmx - nilvaiu.dll missing when trying to open the CODE of WIN7 32 bit LV10?

  Have mutli worm of LV - 7.1 to LV10sp1 on XP PC.  DAQmx - nilvaiu.dll missing when trying to open the CODE of WIN7 32 bit LV10?

  Should which driver I?  VERSION please - DAQmx works fine in LV8.6.

  Hi Briana,

  I think I understand what you're asking, but what current DAQmx driver use you with LV 2010?  Only the 9.1.5 and above drivers are compatible with LV 2010, while many of the old drivers will still work for you in LV 8.6.  Below, I have linked an array of DAQmx driver compatibility and Labview versions.

  http://digital.NI.com/public.nsf/allkb/F4E76EC05118F72D8625773000672298

  Does that answer your question?

• the "uncdms.dll" error when I restart my computer. How can I fix?

  the "uncdms.dll" error when I restart my computer. How can I fix?

  The file belongs to the software Windows Desktop Search. If you use it, you can uninstall it from Add/Remove programs. If you use it (even if I think it's pretty awful), uninstall and then reinstall. MS - MVP - Elephant Boy computers - don't panic!

• Repositioning of the authorized system DLL: the user32.dll system DLL has been moved in memory.

  ERROR MESSAGE

  Repositioning of the authorized system DLL: the user32.dll system DLL has been moved in memory. The application will not work correctly. The move took place as C:\WINDOWS\system32\SHELL32.dll DLL occupied an area of address reserved for Windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL.

  PROBLEMS

  This error causes my Calculator do not open it, also not allowing my flash drive to date, Chrome, Nokia PC and more. There also cause Chrome, Nokia PC, Flash player and other programs do not to install. Therefore, I would like to Note that system Restore will not restore the computer.

  MY COMPUTER DESCRIPTION

  Microsoft Windows XP

  Home Edition

  Version 2002

  Service Pack 3

  QUESTION

  (1) which can caused a user32.dll / corrupt relocated in memory, dll files are missing?
  (2) the error message says move. What are the step to go to find the DLL that comes to mind? are how we go about replacing?
  (3) how do I fix this?
   
   
  DLL system. User32.dll

  Hello

  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click principally made programs, Accessories, right-click on command prompt and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747