JavaFX Tableview not link with the controller class (JDK 8)

Similar Questions

• 2602AP will not register with the 5508 controller

  Hello all-

  We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

  Capwap debug events:

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  Debug Capwap errors:

  * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

  * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

  Debug Capwap Details:

  * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

  * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

  Journal of the Console from the AP:

  Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

  * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

  * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

  * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).
  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller
  *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246
  *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
  

  Get much better.

  WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

  Firewall?  Routing loop?

  What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

  You know what?  Can you post the output in the following commands:

  1 WAP: sh of stocks;

  2 WLC: sh sysinfo

  Nuts, I should already posed for these info before.

• I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials.

  I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials (example below):

  Your MC ID: xxxxxxx

  Your temporary access code: 18995EBE-BDAF-4883-8F95-64D18D261848

  I created a new account with the e-mail MC ID has been sent and it was not recognized.  I would like to merge (link) the news and be able to get a fresh copy of my cert.  Thank you.

  Hello

  I suggest you contact Microsoft Learning support team to improve assistance:

  http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx

• dynamic link does not connect with the aftermath?

  Dynamic link does not connect with the aftermath?

  Hi Robert,.

  Dynamic link works between versions of similar applications. Make sure you have the same version of both applications.

  For example, Premiere Pro CC 2015 won't work in dynamic link with after effects CC 2015

  First Pro CC 2014.2 will work in dynamic link with after effects CC 2014.2 and so on...

  Thank you

  Regalo

• class does not not with the document class

  I created classes that is available to my level. So level 1 includes a table like:

    floor1[0] = [2,1,1,1,1,1,2];
  floor1[1] = [1,1,1,1,1,1,1];
  floor1[2] = [1,1,1,2,1,1,1];
  floor1[3] = [1,1,1,1,1,1,1];
  floor1[4] = [1,1,1,2,1,1,1];
  floor1[5] = [1,1,1,1,1,1,1];
  floor1[6] = [2,1,1,1,1,1,2];


  And level 2 would contain a different as configuration:

  Floor2 [0] = [1,1,1,3,1,1,1];
  floor2[1] = [1,2,1,3,1,2,1];
  floor2[2] = [1,1,1,3,1,1,1];
  floor2[3] = [1,1,1,2,1,1,1];
  floor2[4] = [1,1,1,3,1,1,1];
  floor2[5] = [1,2,1,3,1,2,1];
  floor2[6] = [1,1,1,3,1,1,1];

  Here's my problem. These classes are not connect with my document class. My document has an empty array named createFloor which will equal level 1 first. Once this level is completed, it will be equal to floor2 and so on. The code is below:

  for (var y = 0; Y < createFloor.length;. Y++)

  {

  for (var X:int = 0; X < createFloor [Y] .length; X++)

  {

  var cell: MovieClip = new Tile (X, Y);

  cell.gotoAndStop(createFloor[Y][X]);

  Cell.x = ((X-Y) * tileh) 365;

  Cell.y = ((X+Y) * tileh/2) + 70;

  addChild (cell);

  cell.addEventListener (MouseEvent.CLICK, mouse click);

  cell.addEventListener (Event.ENTER_FRAME, onGame);

  }

  }

  I don't know how to get the document classes and level to talk with each other. I tried to do the level class to extend the hand, but I fugre that had nothing to do with it. All ideas
  

  change your class Level1:

  package {}

  import flash.display.MovieClip;

  SerializableAttribute public class extends MovieClip {} Level1

  public var floor1:Array;

  public void Level1() {}

  Level 1 = new Array();

  LEVEL 1 [0] = [2,1,1,1,1,1,2];

  LEVEL 1 [1] = [1,1,1,1,1,1,1];

  LEVEL 1 [2] = [1,1,1,2,1,1,1];

  LEVEL 1 [3] = [1,1,1,1,1,1,1];

  LEVEL 1 [4] = [1,1,1,2,1,1,1];

  LEVEL 1 [5] = [1,1,1,1,1,1,1];

  LEVEL 1 [6] = [2,1,1,1,1,1,2];

  }

  }

  }

  until level 1 is in the same directory as your document class, in your document class you can use:

  private var level1:Level1 = new Level1();

  trace (Level1.Floor1);

• [JS, CS4] TextFrame.extractLabel () does not work with the instances of this class

  I have the script, which works very well in CS3. In CS4 (app.version = 6.0.1.532) However, I get an error using extractLabel, after reading a few other a textframe properties:

  frameObject.extractLabel ('name')
  Error: TextFrame.extractLabel () does not work with the instances of this class

  Until the reading of one of the 'normal' properties, such as (frameObject.) content I can call frameObject.extractLabel ('name') without errors, but after "watching" (assign it to a variable in the code, or by getting the value in the javascript console), the content property (or as it seems any normal property) the extractLabel method generates the above error.

  It seems to work to move all frameObject.extractLabel at the beginning of the function calls, but I don't think that I would need to do this.

  It could very well be the case that the label read by extractLabel has no content and never received. Will there be a change in behaviour of CS3 in this sentence? If so, and if this is the reason for the error, is there then a way to determine if the label has been assigned?

  This error is familiar to someone else?

  Best regards

  Andreas

  It works if you use:

  var pgItm = app.activeDocument.textFrames.itemByID(parseInt(myId));
  

  Otherwise, this might work:

  var pgItm = app.activeDocument.pageItems.itemByID(parseInt(myId)).getElements()[0];
  

  Although, generally, itemByID gives you the question no matter what it is as long as there are, so I'm bit puzzled that neither of them will be necessary.

  Dave

• How to get the controller class of the a fxml file open in a tab?

  Hello.
  First of all, sorry for my bad inglish, that is not my language.
  
  Introduction:
  I work in the skeleton of an enterprisse application in javafx. Generally (in the past), I used swing with InternalFrames MDI form. Search in the web site on how can he do this, I found that the concept of the MDI form is obsolete, is recommended to use a tabpanel structure. I started to develop the application with this concept, but I have a question.
  
  Scenario:
  I have a main window with:
  -Menu: To access the different options
  -Toolbar: To run the day-to-day operations (open, save, edit, delete and print)
  -TabPanel: To display the dashboard and fxml files opened from the menu.
  -Status bar: To display information.
  
  [http://www.blueboxmicrosystems.com/fxml.png |] See the image]
  
  The problem:
  I don't know how to access the methods of the controller of the fxml file on the active tab.
  
  Note: I have an interface with operations (open, save, edit, delete and print) and the tools of the interface controllers.
  
  The question:
  How can I me the controller class of the file fxml in the active tab in order to call methods?
  
  Kind regards
  
  Published by: user10311523 on 31-mar-2013 20:36
  
  Published by: m_ilio on 01-Apr-2013 05:40

  Instead of

   Parent root =  FXMLLoader.load(getClass().getResource(fxmlFile));
  

  do

  FXMLLoader loader = new FXMLLoader(getClass().getResource(fxmlFile));
  Parent root = (Parent) loader.load();
  MyControllerType controller = loader.getController();
  // now you'll need to keep track of the controller somewhere, maybe a Map
  

  where of course you replace MyControllerType with classname of your controller.

• How to join a network domain with the controller rt PharLab running?

  I have a PXI system that I would like to be able to access anywhere in the corporate network. Currently, I'm access via the IP address, but want to use the host name instead. Unfortunately, I couldn't find a way to join the network with the controller running PharLab area.

  Any suggestions in this regard would be welcome.

  Respect,

  Česlav

  Hello Bob and Česlav,

  I think Česlav was looking for / ask something different. (please tell me if I'm wrong)

  He really wants to do its PXI RT "look-uppable" via its corporate network without necessarily be on the same subnet (and use the IP address).

  In light of the additional information you (Česlav) provide that I would say again that you contact your IT Department first to see how they prefer it.

  They will generally the method of choice to do this. (both for desktop computers with respect to other devices)

  Sometimes it comes down to add to "add your host name and IP address to a list of DNS.

  The page that you link to is a specific way of Windows, adding yourself to a domain.

  Note that add you to a domain should provide you with the ability to use host names.

  However, he also did other things, which may not be possible or even allowed for other types of devices.

  In most companies you don't even have your desktop admin rights necessary to add your own pc (following this way) to the area, as it may cause a lot of security issues and risks.

  Because I don't really know what the establishment IT is by your side I can't really (with certainty) comment on what you should be able to do (and is not).

• Bug trying to create the link with the Cyrillic characters in URL

  I'm transforming words in my text on the links, but with Cyrillic characters in their URL (such as https://en.wiktionary.org/wiki/ хорошо). The problem is that, depending on how create the link, the page refuses to accept the URL.

  It's my preferred method (which accepts not the Pages):

  1. Write or select the text to be transformed into link;
  2. Press cmd + k;
  3. Paste the URL (https://en.wiktionary.org/wiki/ хорошо) in the field;
  4. Hit enter or click out;
  5. When I check the link, it is www.apple.com.

  The strange is that other methods work very well.

  1 against nature (accepts Pages):

  1. Delete my word;
  2. In its place, paste the URL (https://en.wiktionary.org/wiki/ хорошо);
  3. Hit the space bar (a link is created automatically with the correct URL);
  4. Edit the link that is created and change its text;
  5. When I check the link, he kept correct.

  2 against nature (accepts Pages):

  1. Write or select the text to be transformed into link;
  2. Press cmd + k;
  3. Find a way to build a version with my URL (https://en.wiktionary.org/wiki/%D1%85%D0%BE%D1%80%D0%BE%D1%88%D0%BE) escape sequence;
  4. Paste the URL with escape sequence in link field;
  5. Hit enter or click out;
  6. When I check the link, ironically, is хорошо https://en.wiktionary.org/wiki/.

  To stretch more:

  1. Editing a link created successfully (with any success methods above);
  2. Changed its URL (from хорошо https://en.wiktionary.org/wiki/ to https://en.wiktionary.org/wiki/ плохо)
  3. Hit enter or click out;
  4. When I check the link, it's still хорошо https://en.wiktionary.org/wiki/;
  5. Finally edited and changed its URL still once, now remove the Cyrillic (https://en.wiktionary.org/wiki);
  6. Press enter, click out and he finally accepted the URL.

  Pages seems to be denying the creation of links with the URL that contains Cyrillic characters (only?), but exclusively through his little creation of link popup. I think it's a simple problem, but I'm sure it's very annoying.

  Everyone knows the same?

  Cyrillic characters in the range of table encoding UTF-8 code points u + 0400 - u + 04 FF are represented by two bytes. These people must be encoded as a percentage (read the two paragraphs of the current standard of article), as the Pages v5.6.2 will convert automatically URI to this encoding for you in the link Inspector. It will simply ignore what it considers incorrect URI links, they are Cyrillic, or even English.

  Use what is easier for you, and that Pages v5.6.2 accepts.

• Issues with the controller of Siri

  I got the last Apple TV since Christmas, and lately, it seems that I might have a problem with the controller of Siri. When you place your finger to use the contact surface, for that one click-much like the glass mini is not defined in law if that makes sense.

  Does not really affect the operation but is off-putting. If you want to just to click and press down, basically click twice on it records only one. He did not have it to begin with and has not been abandoned or anything - is always in perfect condition. Don't know if anyone has similar problems or if I have an error with mine?

  Sounds like it is damaged or defective for me

• 16.0.2 Firefox is not compatible with the zone alarm Forcefield AGAIN. Please, help users with that. No current positions

  Before I updated to the current version, I checked for "reserves" and found nothing to indicate that the Zone Alarm Extreme Security, ForceField was not compatible with the Version 16.0.2. If I had known that I would not have updated. Y at - it no use for those of us who have this problem. ? The only post I noticed on this problem is 'closed' and dated about 8 months ago.

  Thanks for the reply, the old Fox!

  I agree with you 100%. This occurred without fault to each new update of Firefox.

  I wish that Firefox had warned users of the incompatibility issues with ZA ForceField, as they have done with other problems before users downloading the latest version of Firefox.

  Thank you also for the link to the "release notes", which I didn't have before. It is a help in the future.

  Warm greetings,

      Boudica
  

• DASYLab is not communicating with the hardware dbk25a3

  Hello:

  I'm trying to troubleshoot a high pressure processing equipment. This system uses a PID controller. The level of pressure does not stop at the set point, but continue to increase. I am trying to solve this problem. As the program was written by someone else and there is no documentation on what each represent module and done. It is very difficult for me to solve the problems. Therefore, I decided to start all over again with my own module.  However, I have a problem. My hardware (DBK25 and others) is not communicating with the module of Dasylab. I tried several different things, that nothing seemed to work. I get this error.

  DBK25A3O

  An entry of a module is open.

  Any help is highly appreciated

  Thank you

  Krishna

  The error message indicates that you have a module that has one input open - nothing is connected. You must have a data wire to all entries.

• Fail to communicate with the controller of pump ISCO D series

  Hey everybody,

  I have an ISCO D pumps controller (which is connected to a syringe model 100DX ISCO pump) series I want to control using RS232 on Labview. I don't have their LabView Toolkit that Teledyne has mentioned in their technical Bulletin (TB06). In addition, I would like to automate my test, so using the Labview Toolkit will be not too useful.

  The problem I face is not being able to communicate with the controller via hyperterminal or LabVIEW.

  I ran their (mentioned in TB06) integrated series test and communicate as expected. I also tried to run their program remote pump (mentioned in technical Bulletin 19 of Teledyne - TB19) which seems to do what is expected as well.

  I tried to talk about using LabVIEW first using the vi that I joined, and I saw nothing on the buffer. So, I moved to hyperterminal.

  But when I try to send the command 'remote' listed in TB19, it doesn't seem to do anything. There is no answer on the hyperterminal.

  There is mention of a DASNET Protocol, and I found the .dll file that I also moved in my Windows System 32 folder. It did not work even after that too.

  I have attached TB06 and TB19. Let me know if you have other ideas how to do to test it.

  Please let me know if you need further information.

  Thank you

  Sandeep

  Hey everybody,

  After going through their best manual, I found the way to correctly send a frame. The manual at, www.isco.com/pcfiles/PartPDF/SL000004/UP00194U.pdf, section 7 specifically, it is intended.

  For the purposes of anyone who stumbles across this thread, here's an example.

  If you have your.

  Destination (the pump regulator) ID = 1

  the source of the (computer) message = 00

  and you try to send the message to DISTANCE that would turn the controller in "REMOTE" mode

  Then you would send '1R006REMOTE1B', where 1 is the ID of destination
  R is right to recognize the previous received message

  00 is the ID of the computer

  6 length of command

  "REMOTE" the command itself, must be uppercase

  Checksum 1 b (which changes with the command of course)

  And you can do the same thing in LabVIEW, you can enter '1R006REMOTE1B' in the VISA write while keeping everything else the same as the snapshot of the vi I sent previously.

  Dennis, actually do not have the CD itself, but I assumed, would nothing more than an executable since I downloaded the demo driver for LabVIEW (http://www.isco.com/products/appnotes.asp?PL=105 under utilities) pump. I am currently trying to locate the CD here at the lab, and I will update this thread if I find something useful.

  I guess that my problem has been resolved.

  Thanks for your input in this Dennis.

  Kind regards

  Sandeep

• Running game - this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program

  I'm having the same problem that is described in this topic: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f15edea1-f88f-492e-bb42-4db2b06fdf05

  My error message is: "this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program and then contact the software publisher. »

  I tried to run the program in question (Castle of the winds) in each mode of compatibility that is on the list and it is giving me this error message every time. Other people have managed to get the program to work, so I don't know, it does not work on Windows 7, but I can't make it work for me.

  Help?

  Hi autohaptic,

  (a) on the computer what Edition\Version of Windows 7 operating system do you use? What type of system? 32-bit or 64-bit

  If you are running Windows 7 64-bit operating system, you can install the 64-bit computer game program.

  (b) on the computer which the castle of the winds game version are you running?

  I want to clarify, if you try to install the program or trying to run.

  Step 1: Put the computer in a clean boot, and then try to run the game

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  You can consider the right version of the game for your computer relocation program.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.