Similar Questions

• RT: fault 9512 module when you use the hybrid mode

  Hello, I have a problem with my configuration of hyrbid cRIO. I am currently using Labview 2010, cRIO-9074, x 1 NI 9234, and NI 9512 3 x.

  Summary:

  What you trying to accomplish?

  -J' built two screws, one who acquires the data of a NI 9234. This vi is one that uses the FPGA due to 51.2 kHz sampling frequency needs. The other is to playback motion and three NI 9512 s (scan mode) encoder. Both work fine separately (on the same FPGA bitfile), but when I copy and paste the VI for the NI 9234 in VI for the 3 9512 x s and click Run, the fault of motors.

  What are the steps needed to reproduce the problems?
  Click on execute in the joint (prepared program_2VItesting.vi).

  What measures, if any, you have taken to solve all the problems and the results of your attempts
  -J' have confirmed that if I turn the two screws separately, they work fine. The first time I combine work 9512 s for a second (i.e. the engines a bit) on the two screws. Then he cracks. I then used the distribution manager to clear the fault and run it again (note: there is no error code, I just erase the Red led on the module by changing the configuration mode and active mode). Every time the first time the engines do not move at all.

  -J' have confirmed that I have properly configure this kB from hybrid mode:
  http://digital.NI.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690

  I have attached the vi of two combined screw (prepare program_2VITesting.vi) together. Half upper is program FPGA copied and pasted (as noted by the reference open VI) and the bottom is the scan mode (as noted by the timed loop). I've also attached the separate screw (program prepared and JustDAQ) that can also work well now by pressing justing run.

  Am I missing something simple here right?

  Thank you

  Troy

  So it turns out that you just put the cRIO in Setup mode when you set up your open your ref FPGA and reset. Then change to the active mode (any program) before you do anything else in your program (i.e. the very very beginner). A picture is attached.

  -Troy

• Determinations of web OPA shows white screen when you use the data model

  Hello

  I use Oracle Policy Modeling 10.5.5.40 on windows 7. I use embedded apache tomcat to test.

  I have started a new project, added a simple rule:
  

  [b1] the parent is eligible for the benefits of compassion so

  [b2] parent has a child

  I chose 'Build and Run' selected web determinations, work very well.

  When I added a data model, created two entities, parent-child, and the child is contained in the parent as to-many, then ran the project, it won't work any more. The section that says:

  =====

  The screen automatic

  • Is the eligible parent to compassionate care benefits?

  =========

  is absent.

  I also tried to open an example of "MembershipDemo" that comes with OPM, same problem.

  Any ideas how can I fix?

  Thank you very much

  Looks like you have probably changed the Boolean value "the parent is eligible for compassionate care benefits" from the global to the parent. This means that is no longer a goal because it is a single Boolean value that can be determined, it is now a Boolean value for each parent in the rule template.

  The goal that presents itself as the first screen in your interview display all the high-level objectives - that is, all objectives at the global level.

  Some possible solutions to get a goal for your interview may are:

  1. If you try to determine cbb for 1 single parent, then you probably shouldn't introduce a parent entity, use the global as a parent

  2 introduce a global "all determined the eligibility of the BCC of parents" trying to see if "the parent is eligible for compassionate care benefits" is known to all parents

  3 decide which is the highest level (s) for your interview and to introduce these Boolean values to the global level.

• When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang

  When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang up LR

  Doing a lot of brushing up on an image using Lightroom is known to have this problem. The first thing to try is to turn off the graphics acceleration (go to Preferences/Performance tab and then uncheck the box here). IF this does not help, then you can consider doing your brush in Photoshop Elements or Photoshop, instead of brushing in Lightroom.

• MainStage "lag" when you use the SPACEBAR as 'play '.

  Hi all, I'm relatively new to Mainstage (V3), and I'm hoping to use it for the first time this weekend to play the extra backing with a band tracks

  The issue I'm having, is that with the SPACEBAR of laptops on 'PLAY '. It is often "lag". or simply does not start the song. I have to wait a second, then hit again, it will work.  It is almost as if in Performance mode, when you use the down arrow key to select the next song, the 'focus' is on the list of patch, and if I click in the background where are playback buttons and stop, THEN that will work. I have not, however, been able to reproduce this particular behavior on a consistent basis.

  Everyone knows the same thing? Or why it is so 'all or nothing '?

  And a question important much donor... I gave all my reading titles to the waveform appropriate the other night (so I could visually see the waveforms above the attenuator as offers of backing track model), however, once I was moving songs in a different order, which stopped working. No idea why?

  Thnaks in advance

  About the offset by hitting the space bar, a thought occurred to me.

  How Mainstage allocates 44.1/16 bit wave files used in the reading plug-in? Which means, when a song is selected, which uses, for example, to separate the 5 cases of reading, one can assume that these audio files used in that song would need to "load" first.

  Anyone know if this is how Mainstage works?

• ORA-01789 - when you use the operator of TABLE and SEM_MATCH

  Client version: 11.1.0.7 on Windows 7 (32 bit)
  Server version: 11.2.0.3 on Windows 7 (64-bit)
  
  I am model prototyping a simple RDF, and I'm getting a ' ORA-01789: block has an incorrect number of columns in query results "when you use the SEM_MATCH with the SCOREBOARD operator.
  
  I can run this:
  

  select id, a.triple.GET_TRIPLE() from drik.rdf_data a

  and the first line is:
  

  (<http://www.ihc.com/drik/term#2>, <http://www.w3.org/2000/01/rdf-schema#subClassOf>, <http://www.ihc.com/drik/term#1>)

  Now, I want to use the TABLE like this:
  

  select
    c
  from 
    table(sem_match('{ <http://www.ihc.com/drik/term#2> <http://www.w3.org/2000/01/rdf-schema#subClassOf> ?c . }', 
          sem_models('Prototype'),
          sem_rulebases('RDFS'),
          sem_aliases(sem_alias('rdfs','http://www.w3.org/2000/01/rdf-schema/')),
          null
          ))

  But this performance gives the ORA-07189. Even try SELECT * gives the same error.
  
  I expect to get a refund:
  

  <http://www.ihc.com/drik/term#1>

  How should I approach troubleshooting this?
  
  Thank you, Steve

  Thanks for posting the script. I was able to reproduce the error locally.

  The problem is the use of the sem_apis.create_rules_index () procedure, which has been deprecated:
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25609/sdo_rdf_newfeat.htm#autoId26

  Please use sem_apis.create_entailment () instead, and the error should disappear.
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25609/sem_apis_ref.htm#CHEHDGBD

  Thank you
  Matt

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• How to enter the character ü when you use the pinyin keyboard?

  How can I enter the character u when you use the pinyin-simplified keyboard, for example, for the opening of the syllable nu with your 3.

  The keyboard pinyin-simplified is for entering the characters han, not latin.  If you want to type the latin pinyin, you must use the extended ABC keyboard configuration.  A list of the shortcuts is to

  http://symbolcodes.TLT.PSU.edu/accents/codemacext.html

• Is cell required when you use the map applications of conduct?

  Is cell required when you use the map applications of conduct?

  Yes. GPS does not work with a Wi - Fi connection.

• WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  https://support.Mozilla.com/en-us/KB/granting+JavaScript+access+to+the+Clipboard

  This extension will help you implement the security policies for access to the Clipboard.
  
  Allow the extended Clipboard support:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/852

• Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

  Hi all

  As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

  I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

  Any assistance received very warmly.

  Thank you!

  Hello

  Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

  Maybe's external screen connected to the docking station?

• M40X-141: black screen when you use the WiFi network

  Since I bought my M40X 141 in July 2005, I got black screen frequently when you use the wifi.

  You know this black screen with typical noise from the hard drive.

  I did all the updates without effect. The local seller understood nothing black screen, associated with the use of wifi.

  In the XP world, nobody seems to find this kind of abnormal things so I'm desperate to find a solution to stop the frequent black screens. Recently try a usb dlink wifi dongle (dwl-G122) the constant flow of black screens disappeared
  (An Xp session 10 days was previously impossible).

  Now, I know this is a bug in the original software and I try desespartely to find a patch or updated driver or professional advice.

  Is there someone here who can help a tired multi restart man to use his laptop with the original material?

  Your laptop should still be guaranteed if you bought in June 2005. Take it to your authorized Service Provider nearest and have their say. They should already provide for a procedure for this and know what to do. Sure the frequency that uses WIFI and display inverter coincides, and you get the black screen. Change them should fix this problem.

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• Satellite L40 crashes when you use the product recovery disc

  When you use the product recovery disc to repair my laptop it hang after language page display.

  Select meaning when it displays the language, I select language and press next, no action more far there... I can move one pointer.

  Some may help how to solve the problem.
  Thank you

  > Select sense when it displays the language, I select language and press next, no action more far there

  Perhaps, your recovery disk is corrupt. What happens if you try with Windows disk copy?

• No bass when you use the docking station to not probe

  When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

  

  Yes! I finally solved it on my system:

  • Go to the control panel
  • Choose the material and audio

  or simply to display all Control Panel items

  • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
  • Wait for the program to come black EQ
  • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
  • Uncheck the 'improvement of Audio '.

  Fact

  In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.