JDeveloper 11 g installation example: FOD control failure

Similar Questions

• / pps/system/development/control failure 500: development has failed

  Hi, I have the latest version of the native sdk and wanted to use stunts.

  I started a new application and choose the Hello World project.

  now, I wanted to deploy it on my dev alpha, but I still have these messages:

  / pps/system/development/control failure 500: development has failed

  How to solve this problem?

  Have you tried to reboot the device? Or not it fails again on your first attempt after a reboot?

• Windows cannot complete the installation in Mode without failure. To continue installing Windows, restart the computer.

  HP Desktop, Windows 8.0.  Do a restore of Windows 8 on the hard drive.  Everything is progressing very well until I get this dialog box message: "Windows cannot complete the installation in Mode without failure.  To continue installing Windows, restart the computer. "When I restart the computer the same message appears in a new dialog box.  Before the restoration of Windows, I tried to reset mode without fail to start to get the operating system will once again but failed to get the operating system to boot at all.  Finally resorted to restore to get the computer working again.

  How to exit this loop?

  OK, here's what I discovered.

  When you get the error message mentioned above, you can hold down the SHIFT key and press the F10 key.  This will put you in the command prompt.

  At the command prompt, type: bcdedit [then press enter]

  so to solve my problem I hade type: bcdedit /deletevalue {current} safeboot [then press enter]

  This put the loop I lived and finished restoring Windows 8

• Is there a way to make transitions from State/animations of a States - button for example fl.control?

  Is there a way to make transitions from State/animations of a States - button for example fl.control?

  All I can do now is to change the structure of the skin and that's it, I can't do an animation between States as I can with Flash Builder skins. So is it possible to do so, any technique or I need to create a button from scratch?

  Thank you!

  simplebuttons have properties upState, etc., that you can use to assign some movieclips to the 3 States.  You can use the property movieclps currentFrame (seem to) smooth the transition from one State to another.

• KB977185 & KB981852 security update repeated successful Installation loop / KB954430 & KB973688 failure

  After weeks of searching, I finally decided to seek professional help here... As an important aside, the resolution of this problem is necessary for me to install iTunes (10.0.1) which systematically fails "dissemination of product information. Based on my research online, this problem is rooted in problems with Windows Update. Which brings me to my question...

  (1) KB977185 & KB981852 security updated repeat successful loop Installation

  KB977185 and KB 981852 updates (both "Security Update for Windows 7") "installed successfully" by Windows Update of dozens of times since the 20/08/2010, always as a pair.

  (2) KB954430 & KB973688 failure

  KB954430 ("day of security for Microsoft XML Core Services 4.0 Service Pack 2") and KB973688 ("update for Microsoft XML Core Services 4.0 Service Pack 2") attempted to be installed by Windows Update and not the dozens of times since 08/19/2010. Strangely, it seems Windows Update gave since 26/08/2010, because the most recent entry 'Fail' and Windows Update did not try to download and install since then.

  This whole ordeal has been extremely frustrating. Can someone please?

  Also, my computer is: Dell Latitude E6500 laptop, Windows 7 Enterprise, Intel Core Duo 2 processor T9600 2.80 GHz, 32-bit operating system. Microsoft Security Essentials antivirus protection.

  [repost]

  If the computer belongs to your employer...

  Contact your IT Department for assistance. (Also their saying that the version of Microsoft Security Essentials, you have installed is NOT supported on computers belonging to the company and install on a machine of this type was a violation of the EULA).

  If the computer belongs to you...

  See the section "How to get help", for example, http://support.microsoft.com/kb/981852

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates

  Or you can...

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Example of control simple tree

  Someone at - it a basic vi to show how to create a tree control. Looking for an example showing how to create a parent with little children or a root with some sublevels, whatever the correct terminology is...

  I looked at the example provided with labVIEW but it is quite complex, I played a bit with the tree control methods but get errors...

  Stroke

  Hi the shots.

  See a more simple: -.

  https://decibel.NI.com/content/docs/doc-7248

• Visual Studio 2010 Tools for the Installation of Office Runtime failure

  Hello

  the installation fails with the error code 1601. I studied this code but received no responses that could solve my problem. complete logs are pasted below. any help it will be appreciated.

  The following properties have been defined:
  Property: [AdminUser] = true {boolean}
  Property: [InstallMode] = {string} SameSite
  Property: [NTProductType] = 1 {int}
  Property: [ProcessorArchitecture] = {string} AMD64
  Property: [VersionNT] = 6.1.1 {version}
  Controls running for package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)", phase BuildList
  Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4' registry key value
  Read the string value "10.0.40820".
  "Definition of value ' 10.0.40820 {string}" property "VSTORuntimeVersionOfficeInstalled".
  Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R' registry key value
  Failed to read the registry value
  Do not set value for the property "VSTORuntimeVersionInstalled".
  The following properties have been set for the package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)":
  Property: [VSTORuntimeVersionOfficeInstalled] = 10.0.40820 {string}
  Execution of the command controls 'VSTOR401\vstor_redist.exe '.
  Jump ByPassIf because the 'VSTORuntimeVersionInstalled' property has not been set.
  Result of operation operator 'VersionGreaterThanOrEqualTo' property 'VSTORuntimeVersionOfficeInstalled' and the value ' 10.0.60724': false
  Result of operation operator "ValueEqualTo" property "AdminUser" and the "false" value: false
  Result of the 'VSTOR401\vstor_redist.exe' command controls is 'Install '.
  "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" RunCheck result: installation required
  EULA for components "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" has been accepted.
  Copying files to the temporary directory 'C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\ '.
  Copy "C:\Users\rchand02\Downloads\UnifyOffice_x86\VSTOR401\vstor_redist.exe" to "C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe".
  Check the integrity of files C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe
  WinVerifyTrust returned 0
  Trust file
  Controls running for package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)", phase BeforePackage
  Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4' registry key value
  Read the string value "10.0.40820".
  "Definition of value ' 10.0.40820 {string}" property "VSTORuntimeVersionOfficeInstalled".
  Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R' registry key value
  Failed to read the registry value
  Do not set value for the property "VSTORuntimeVersionInstalled".
  The following properties have been set for the package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)":
  Property: [VSTORuntimeVersionOfficeInstalled] = 10.0.40820 {string}
  Execution of the command controls 'VSTOR401\vstor_redist.exe '.
  Jump ByPassIf because the 'VSTORuntimeVersionInstalled' property has not been set.
  Result of operation operator 'VersionGreaterThanOrEqualTo' property 'VSTORuntimeVersionOfficeInstalled' and the value ' 10.0.60724': false
  Result of operation operator "ValueEqualTo" property "AdminUser" and the "false" value: false
  Result of the 'VSTOR401\vstor_redist.exe' command controls is 'Install '.
  "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" RunCheck result: installation required
  Check the integrity of files C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe
  WinVerifyTrust returned 0
  Trust file
  Installation using the command "C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe" and «/q /norestart» parameters
  Process came out with code 1601
  Status of the package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" after the installation is "InstallFailed".

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• JDeveloper and tutorial Installation and problem

  Hi, I'm currently said with Jdeveloper, and I am following the tutorial at http://docs.Oracle.com/CD/E37547_01/tutorials/tut_ide/tut_ide.html . When I get down at the bottom of this tutorial, it asks me to take a JSF page and drag it on the screen. Name page1.jspx and click Preview in the background; However, when I do that, I get an error: NoClassDefFoundError in org.netbeans.modules.netbinox.NetbinoxLoader:97 I tried to install Jdeveloper on three different machines, and I will still meet this issue. I think that I am ignorant something in the installation. Someone at - he no clue as to what a solution might be?

  I feel embarrassed. I finally realized that the use of Java jdk 8 +. He gave me the question. I switched to Java 7 and it works perfectly now.

• I HAVE 2 ERRORES AL INSTALAR LIGHTROOM 1) installation of the Package failure redistributable Microsoft Visual C++ 2012 (x 64)... Third party 2) payload Installer vcredist_x64.exe failed with exit code:-2147024546 - No. YANG UNA IDEA OF Q SEA ESTO, AYUDAA

  I have two specific errors to install lightroom 1)

  Third-party installer vcredist_x64.exe payload failed with exit code:-2147024546

  2)Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64). I don´t have any idea what to do, heeeelp!! please!!

  Leave the creative Cloud desktop application.

  Go to Control Panel > program and features.

  Under the list of programs, look for " 2012 Microsoft Visual C++ Redistributable package (x 64)" and uninstall the same.

  When you are prompted to " reboot" the computer.

  Then uninstall " package redistributable Microsoft Visual C++ 2012 (x 64).

  Once you had uninstalled package redistributable Microsoft Visual C++ 2012 (x 64). Click on the link below and "vcredist_x64.exe" download and install the same.

  http://download.Microsoft.com/download/1/6/B/16B06F60-3B20-4FF2-B699-5E9B7962F9AE/VSU_4/VC redist_x64.exe

  Then launch application creative cloud and try to install again and check.

• installation of grid control Agent (11.1) on a node RAC 2 (11.2)

  Hi, I am preparing an installation of push (11.1.1) Agent of the grid on a 2 DB of RAC (11.2.0.3) node as user 'oracle '. Is there a problem with using id 'oracle' for push Agent too? (oracle is the owner of the RAC cluster too).
  
  Kind regards
  Lily

  Hi Lily,

  You can use the accounts to the same users or different OS to install a database, a CMS or an agent. If you use different user accounts, ensure that the owner of the agent software is in the same group of BONE as the owner of the software of the monitored targets (for example to read the file journal alert a target database).

  Kind regards
  -Loc

• 12 c EM Installer fails 20% - control must never come here

  I try to install EM 12 c on Centos 64-bit 5.7, but when the installer about hits 20%, it stops.
  

  [oracle@gc2 db_downloads]$ ./runInstaller 
  Starting Oracle Universal Installer...
  
  Checking Temp space: must be greater than 400 MB.   Actual 61226 MB    Passed
  Checking swap space: must be greater than 150 MB.   Actual 4095 MB    Passed
  Checking monitor: must be configured to display at least 256 colors.    Actual 16777216    Passed
  Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-11-16_08-42-08AM. Please wait ...[oracle@gc2 db_downloads]$  Unzipping operation is succeed..
  the location is : /u04/app/oracle/middleware/oms/install/tmp_installer/oracle.sysman.db/12.1.0.1.0
   Unzipping operation is succeed..
  the location is : /u04/app/oracle/middleware/oms/install/tmp_installer/oracle.sysman.xa/12.1.0.1.0
   Unzipping operation is succeed..
  the location is : /u04/app/oracle/middleware/oms/install/tmp_installer/oracle.sysman.emas/12.1.0.1.0
   Unzipping operation is succeed..
  the location is : /u04/app/oracle/middleware/oms/install/tmp_installer/oracle.sysman.mos/12.1.0.1.0
   Unzipping operation is succeed..
  the location is : /u04/app/oracle/middleware/oms/sysman/install/plugins/oracle.sysman.csa/12.1.0.1.0
   Unzipping operation is succeed..
  the location is : /u04/app/oracle/middleware/oms/sysman/install/plugins/oracle.sysman.beacon/12.1.0.1.0
   Unzipping operation is succeed..
  the location is : /u04/app/oracle/middleware/oms/sysman/install/plugins/oracle.sysman.oh/12.1.0.1.0
   Unzipping operation is succeed..
  the location is : /u04/app/oracle/middleware/oms/sysman/install/plugins/oracle.sysman.emrep/12.1.0.1.0
  Control should never come here

  When I look at the tail of the oraInventory/log file, the only details pointing to a question is the following:
  
  [oracle@gc2 log] $ cat cloneActions2011-11-16_09-03-19-AM.log

  <snip>
  INFO: SaveInvWCCE JRE files in Scratch : 0
  INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
  INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
  INFO: Config Initialize JRE files in Scratch : 0
  INFO: no env vars set, no envVars.properties file is generated
  INFO: none of the components are configurable
  INFO: encapsulating aggrname: 
  INFO: encapsulating aggrfile Name: 
  INFO: encapsulating aggr file loc: 
  INFO: copying  from /
  INFO: OUI-10185:Unable to copy '/' to '/u04/app/oracle/middleware/agent/plugins/oracle.sysman.xa.discovery.plugin_12.1.0.1.0/inventory/ContentsXML/ConfigXML/.1_0_0_0_0.xml'. OUI-10187:/ is a directory, specify a valid filename.
  INFO: This is a shared oracle home or remote nodes are null. No copy required.
  INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
  INFO: Install Finished at: 2011-11-16_09-03-42-AM

  [oracle@gc2 logs]$ cat oraInstall2011-11-16_09-03-19-AM.out
  Control should never come here

  I already installed 11.2.0.3 on this server and followed the requirements of 12 c (RPM, limits.conf, unset ORACLE_HOME, ORACLE_SID, ORACLE_BASE variables (not to mention db stuff, like the installation program does not get this far yet)).
  
  Initially I thought it was a problem of java, so installed the JDK 1.6.0_29 and set JAVA_HOME, but still get this error.
  
  Short opening a SR with Oracle, someone of suggestions on what I might be missing?

  I came across the problem yesterday (being on RHEL5.7,) so attested. In my case, it's the redownloading, that did the trick, did not use uncompress.
  Who taught me to always to the cksum check :)

• IDP_JMS_Bus / engine on the new installation of e-mail failure

  Greetings:

  I'm trying to get a new installation of 8.2 in a WebSphere 6.1 win 2003 / SQL Server clustered environment.

  Currently the IDP_JMS_Bus does not start, and SystemOut messages point to 'No current e-mail of execution engine'.

  I tried to start the engine, without result on several reboots.

  This facility has taken a number of attempts to complete due to errors in installation.

  The first message in SystemOut autour is:

  [12/05/10 10:52:40:359 CDT] 0000003 has SibMessage W [:] CWSIV0775W: creating a connection to destination adobe_PECommandQueue on bus IDP_JMS_Bus for activation of the endpoint [com.ibm.ws.sib.ra.inbound.impl.SibRaStaticDestinationEndpointActivation@39723972 < active = true > < connections = {} > <messageEndpointFactory=com.ibm.ejs.container.MessageEndpointFactoryImpl@9496c24e> < endpointConfiguration = [com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl$ JmsJcaEndp ointConfigurationImpl@1642750442 < JmsJcaActivationSpecImpl.this=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl@18 66755908 < = null username > < password = null > < = null xaRecoveryAlias > < destination = queue://adobe_PECommandQueue?deliveryMode=Persistent & busName = IDP_JMS_Bus >]] [[< durableSubscriptionHome = null > < destinationType = javax.jms.Queue > < messageSelector = null > < acknowledgeMode = Auto-reconnaître > < subscriptionDurability unsustainable = > < shareDurableSubscriptions = InCluster > < clientId = null > < subscriptionName = null > < maxBatchSize = 1 > < maxConcurrency = 10 > < busName = IDP_JMS_Bus > < shareDataSourceWithCMP = false > < = null targetTransportChain > < = Default readAhead > < target = null > < targetType = BusMember > < targetSignificance = Preferred > < = null providerEndpoints >] >] > <endpointInvoker = com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl @. [68f268f2> <workManager = com.ibm.ejs.j2c.work.WorkManagerImpl @ 170e170e> < endpointMethodTransactional = true > < remoteConnection = null > < remoteDestination = true > <timer=java.util.Timer@4c0c4c0c>] failed with the exception com.ibm.websphere.sib.exception.SIResourceException: CWSIT0088E: there is currently no messaging engine in the IDP_JMS_Bus bus race. Additional failure information: CWSIT0103E: no messaging engine were found that matched the following parameters: bus = IDP_JMS_Bus, targetGroup = null, targetType = BusMember, targetSignificance = Preferred, transportChain is InboundBasicMessaging, close = Bus...

  Then:

  [12/05/10 10:52:46:266 CDT] 0000003 b SibMessage W [:] CWSIV0775W: creating a Default.Topic.Space destination connection on bus IDP_JMS_Bus for activation of the endpoint [com.ibm.ws.sib.ra.inbound.impl.SibRaStaticDestinationEndpointActivation@12521252 < active = true > < connections = {} > <messageEndpointFactory=com.ibm.ejs.container.MessageEndpointFactoryImpl@7aff2ec6> < endpointConfiguration = [com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl$ JmsJcaEndp ointConfigurationImpl@303436310 < JmsJcaActivationSpecImpl.this=[com.ibm.ws.sib.api.jmsra.impl.JmsJcaActivationSpecImpl@16 80368680 < = null username > < password = null > < = null xaRecoveryAlias > < destination = topic://adobe_TaskEventTopic?busName=IDP_JMS_Bus > < = null durableSubscriptionHome >]] [[< destinationType = javax.jms.Topic > < messageSelector = null > < acknowledgeMode = Auto-reconnaître > < subscriptionDurability unsustainable = > < shareDurableSubscriptions = InCluster > < clientId = null > < subscriptionName = null > < maxBatchSize = 1 > < maxConcurrency = 10 > < busName = IDP_JMS_Bus > < shareDataSourceWithCMP = false > < = null targetTransportChain > < = Default readAhead > < target = null > < targetType = BusMember > < targetSignificance = Preferred > < = null providerEndpoints >] >] > <endpointInvoker=com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl@12441244> <= workManager [com.ibm.ejs.j2c.work.WorkManagerImpl@170e170e> < endpointMethodTransactional = false > < remoteConnection = null > < remoteDestination = true > <timer=java.util.Timer@12bc12bc>] failed with the exception com.ibm.websphere.sib.exception.SIResourceException: CWSIT0088E: there is currently no messaging engine in the IDP_JMS_Bus bus race. Additional failure information: CWSIT0103E: no messaging engine were found that matched the following parameters: bus = IDP_JMS_Bus, targetGroup = null, targetType = BusMember, targetSignificance = Preferred, transportChain is InboundBasicMessaging, close = Bus...

  She is followed by many messages of connection creation failure.

  Can someone provide pointers on how to fix this installation?

  I have had advice for the cluster, remove the SIB tables and restart the cluster, but do not try this without a verification it is recommended.

  Thank you in advance!

  Mark

  If this is the case, looks like the messaging engine has trouble getting an exclusive lock on the message store tables in the DB (all start with SIB *):

  http://blogs.Adobe.com/LiveCycle/2007/07/what_are_those_sibtables_in_my.html

  Since it is a new installation, you can drop them safely.  Stop the JMS cluster members, delete all tables SIB, and then restart them.  Watch the SystemOut.log of the members of the cluster for the messages that tell you that the messaging engine has acquired an exclusive lock on the table.  Only one of the members of the group will have this (since the messaging engine is a singleton and can run on one but not both of the JMS cluster members).  If you see this message, check the DB - SIB tables should be recreated, and you won't have this particular problem.

  Essentially, must match the MEUUID in the table SIBOWNER and UUID of the messaging (as determined by the console WAS) engine.

• How to add examples of control flow in the bean to support?

  Hi all
  I use a template for all my jspx pages in my application. This model provides a header which includes the menu of the page all the others. So when I click on a menu it will redirect to the related page. But my problem is that there are so many cases of Flow Control adfc-config.Xml file. For example, 64 cases of control flow must be if there are 8 menus. How can I when a user has clicked on a menu, the case of control flow will be created in the CommandMenu action method?
  Thank you

  Hello

  No you don, t, you can use rules of global control flow, simply do not define the "of-activity-id". Then, if the result occurs, where he come, the user will be moved to the target activity id. 8 pages should probably be 8 control-flow-case within a single global-flow-control rule.

  Kind regards

  ~ Simon

• Portege M800-PPM81E - installation of remote control problem

  Hello guys,.

  I have a problem to install the remote on this laptop.
  First the winbond CIR driver does not work, I try on different OS... the same message... "There is a problem with this Windows package install."

  A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".
  I've now installed Vista x 64... doesn't work.

  Thank you
  M.G.

  Hello

  Remove the old software on the remote control of the system.
  Then, visit the page of European driver of Toshiba and download the drivers and tools.

  On the Toshiba page I found the Remote Control Manager v.2.4.0.1. This driver is required for the remote control work.

• Example: J8X12UA #ABA: failure ID 0K1G9T-7787SP-MFPV7F-60EG03

  Received this ID of failure during the test drive. Tried to recover with recovery usb but failed during the process.

  What does that mean? New hard drive?

  Hello

  Unfortunately to say: most of the time the 24 tank failure id indicates the drive is defective and must be replaced. It is still under warranry? In the affirmative, please call HP for a replacement.

  In the United States:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  or the HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://welcome.HP.com/country/W1/en/contact_us.html
      
  Kind regards.