Example of control simple tree

Similar Questions

• Is there a way to make transitions from State/animations of a States - button for example fl.control?

  Is there a way to make transitions from State/animations of a States - button for example fl.control?

  All I can do now is to change the structure of the skin and that's it, I can't do an animation between States as I can with Flash Builder skins. So is it possible to do so, any technique or I need to create a button from scratch?

  Thank you!

  simplebuttons have properties upState, etc., that you can use to assign some movieclips to the 3 States.  You can use the property movieclps currentFrame (seem to) smooth the transition from one State to another.

• Creating a control simple closed loop

  Hello world

  I need a little help to create a (very) simple closed loop control.

  Note: I use 3 boards of Measurement Computing: a USB-2416 and two USB - TC. Measurement Computing with their own driver (called ULx), it might be a little harder to understand than the drivers NOR, but keep in mind ULx is the equivalent of DAQmx.

  I need to be out in a binary value 0 or 1 based on measures of input voltage compared to the constants of 4 channels. That is to say. If the measure of tension< 3.5="" (constant),="" send="" a="" boolean="" value="" (see="" a,="" b,="" c,="" d="" in="" attached="" photo)="" which="" in="" turn="" gets="" sent="" to="" the="" ulx="" write="" vi,="" and="" that="" outputs="" the="" binary="" value="" of="" 0="" or="" 1.="" the="" problem="" i've="" run="" into="" is="" that="" i="" need="" to="" "compare"="" single="" chanels="" from="" different="" boards,="" which="" gives="" me="" single="" boolean="" values="" for="" each="" channel.="" the="" ulx="" write="" vi="" only="" accepts="" boolean="" arrays.="" is="" there="" a="" way="" (and="" there="" probably="" is,="" i="" just="" haven't="" been="" able="" to="" find="" it)="" of="" arranging="" these="" lone="" boolean="" values="" into="" a="" boolean="">

  (see attachment for what I have so far)

  PS. I'm a COMPLETE beginner, only used LV for a week or two, so please explain everything as if I have no idea what's going on.

  Thanks in advance!

  Hello

  the attached example I did should demonstrate what you need to do.

  A few things to think about:

  1. it seems that the vis ULx return tables of signals. If so, you can select signals with the "index Board" as done in my example. Which consumes less space and does not change the type of the variant signals.

  2. If we compare the signals to your constants you will receive Boolean tables because each element of the measured signal is compared to the constant (see my example). You can then decide how to deal with this info - an another Hooray for signals :-)

  Concerning

  Florian

• Control Panel Tree

  Hello

  I have a tree control that I use to view a test sequence.   I want to put the tree controls in a picture to display several (different) sequences.  I have problems for populating the controls.  When I get the reference, he fills all the controls in the table, rather than a single element.

  Is there a way to fill that one item in the table?

  Thank you
  John

  CPDP says:

  Fine thank you.  If a picture of tree control would work?

  No, that no longer works. Wrap the tree control in a cluster in order to put it in a table always will leave you with the restriction that the properties (for example, tree items) will be the same for each element.

• Question simple tree

  Hello

  I have a tree control that currently just lie all the time by using the following code:

  the tree (tree) updateComplete event, I call it:

  private void expandAllNodes(e:Event)

  {

  If (tree! = null) {}

  If (tree.dataProvider.length > 0) {}

  tree.expandChildrenOf(tree.dataProvider[0]);

  }

  }

  }

  It works exactly as I want it, and it keeps the open tree all the time. So far so good.

  But I want to do instead:

  When an item is added to the tree (in fact the dataProvider), expand all of the nodes (as it does now). But I'd also be able to reduce the nodes if the list is really long (which it may).

  However whenever I reduce a node, the updateComplete fires and opens upward. Is there something else I need to use instead of the updateComplete which would not cause develop it all getting them called again?

  Thanks in advance,

  Jeff

  A simple solution would be to set a flag:

  private var enableExpand:Boolean = true;

  In your build Manager add:

  If (tree! = null & enableExpand) {}

  If (tree.dataProvider.length > 0) {}

  tree.expandChildrenOf(tree.dataProvider[0]);

  }

  }

  enableExpand = true;

  Then, in your addItemToTree all function where you want to, you can set the property enableExpand to false.

  Then, it will prevent the Manager expand to run only once.

  Dany

• Toggle controls simple form based on the value of an element

  Is it possible to toggle the controls on simple form based on the value of an element?
  
  for example, if P21_stat = 1 5 controls behave as type "View as text (saves the State)", otherwise they must be of type "text field"?
  
  No work around if not?

  Hi Alex,

  Look at the definition of the article page, you will find a 'readonly' section where you can specify a condition that this point should be readonly (in all other cases, it is a normal entry point).

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  Work: http://www.click-click.at

• Control of tree cell fonts problems

  Hello

  Once more, I am struggling with issues of tree control.  I am trying to format a tree control the alternation of colors for different lines for readability and also I need the first and last cell to have colors different fonts.  At the time of VI the first seal that I run it, it works fine.  During subsequent runs, font colors change to black, and then I am unable to change them again.

  Any advice would be appreciated

  

• Example of a simple RESTful POST service?

  Hi all

  I wish Oracle had provided an example simple RESTful POST service and does part of the Apex 4.2.x documentation rather than put the only example of a POST in the Apex listener (now Oracle Data Services) developer documentation.  Also, why not complete the lovely examples in the "oracle.example.hr" with additional methods supported as POST instead of using a more complex example in the documentation for the listener - the sample picture gallery?

  So my question is: someone at-it a fine example of text, data digital POST method that includes the creation of RESTful services and then the code needed to perform the JOB to the RESTful service - with an example application Apex or even the content of the URL which must be passed to the RESTful service to get the data in the table (for example, EMP or models of tables DEPT).

  Thank you

  PM

  All,

  Decided to meet myself in case someone else was looking to meet that time - found a very good example, exactly as I described above.

  I was able to create the RESTful POSITION myself, but this thread has been very helpful in leading me to test the MESSAGE in an application and create the Web service reference.

  RESRful POST method

  I guess that it does not appear in the search because of the misspelling in the title of the question.

  Thanks Anthony!

  PM

• How to add examples of control flow in the bean to support?

  Hi all
  I use a template for all my jspx pages in my application. This model provides a header which includes the menu of the page all the others. So when I click on a menu it will redirect to the related page. But my problem is that there are so many cases of Flow Control adfc-config.Xml file. For example, 64 cases of control flow must be if there are 8 menus. How can I when a user has clicked on a menu, the case of control flow will be created in the CommandMenu action method?
  Thank you

  Hello

  No you don, t, you can use rules of global control flow, simply do not define the "of-activity-id". Then, if the result occurs, where he come, the user will be moved to the target activity id. 8 pages should probably be 8 control-flow-case within a single global-flow-control rule.

  Kind regards

  ~ Simon

• simple tree B + javacode

  Hey guys
  the code for B-trees a +?
  I spent a few days and I succumbed do myself or fiding a code refrence that helps
  
  Published by: Zeinab June 8, 2011 22:40

  They will almost certainly be B +-trees despite what he says. B - Tree are not really that well serve their sequential access performance is terrible.

• The control test tree

  When I run FlexPMD 1.1 via Maven, it only checks the tree main source (src/main/flex).  How can I get to also check the test (src/test/flex) source tree?

  We have removed the read-only on this setting indicator. It is still by default the sourceDirectory well build.

  Tom's solution would work now then.

  The trunk and the snapshot repository have been updated.

  See you soon,.

  Xavier

• Example of the next tree: is this feasible?

  It is possible to create a report that contains a feature similar to the excel is a grouping that masks a detail section until a [+] is clicked to expand the area?
  
  
  When collapsed.
  

  Employee Hours_worked Hours_productive Diff
  [+] Joe Blow        48                  45.8            2.2
  [+] Popeye Sailor  64                  62.9            1.1
  ...

  When it is developed
  

  Employee Hours_worked Hours_productive Diff
  [-] Joe Blow        48                  45.8            2.2
       Joe Blow       12                  12.0             0.0
       Joe Blow       12                  11.0             1.0
       Joe Blow       12                  12.0             0.0
       Joe Blow       12                  10.8             1.2
  [-] Popeye Sailor  60                  62.9            -2.9
       Popeye Sailor  12                  12.1            -0.1
       Popeye Sailor  12                  13.1            -1.1
       Popeye Sailor  12                  12.0             0.0
       Popeye Sailor  12                  12.5            -0.5
       Popeye Sailor  12                  13.2            -1.2
  ...

  Hello

  See if the example of CARL help
  http://Apex.Oracle.com/pls/OTN/f?p=11933:1

  BR, Jari

• JDeveloper 11 g installation example: FOD control failure

  Do not have any previous experience in JDeveloper. Downloaded version 11g. Try to follow this link: http://www.oracle.com/technology/obe/obe11jdev/11/common/connection11g.htm to install an example of schema DOM for a tutorial. However in the next step:
  
  5. in the navigation Application, right-click the build.xml file and choose Run Ant Target-> buildAll.
  
  I got:
  
  BUILD FAILED
  C:\FOD\Infrastructure\Ant\build.XML:52: The following error occurred during the execution of this line:
  C:\FOD\Infrastructure\DBSchema\build.XML:91: The following error occurred during the execution of this line:
  C:\FOD\Infrastructure\DBSchema\build.XML:56: The following error occurred during the execution of this line:
  C:\FOD\Infrastructure\DBSchema\build.XML:28: C:\FOD\Infrastructure\Ant\wlserver_10.3\server\lib not found.
  
  Appreciate someone can help out me.
  
  -Denis

  Hi Denis,.

  Just check if you have this directory. Otherwise, edit the build.xml (C:\FOD\Infrastructure\DBSchema\build.xm) and (oracle.xdk_11.1.1) entry to one you have. I guess it should be oracle.xdk_11.1.0.

  Arun-

• Problem with the example of a simple list

  Hello

  I use the Flex SDK 4.5.0.17855 kit (Fri Sep 24, 2010).

  <? XML version = "1.0"? >

  < s:Application

  ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  >

  
  

  < s:RichText >

  < s:TextFlow >

  < s:list >

  element < s:li > < / s:li >

  element < s:li > < / s:li >

  element < s:li > < / s:li >

  < / s:list >

  < / s:TextFlow >

  < / s:RichText >

  
  

  < / s:Application >

  When running, it gives me the following error:

  ArgumentError: "Newelement" not of a type that this can be the parent of

  to flashx.textLayout.elements::FlowGroupElement/replaceChildren() [C:\Vellum\dev\output\openS ource\textLayout\src\flashx\textLayout\elements\FlowGroupElement.as:784]

  to flashx.textLayout.elements::FlowGroupElement/set mxmlChildren() [C:\Vellum\dev\output\openSource\textLayout\src\flashx\textLayout\elements\ FlowGroupElement.as:187]

  to flashx.textLayout.elements::TextFlow/set mxmlChildren() [C:\Vellum\dev\output\openSource\textLayout\src\flashx\textLayout\elements\ TextFlow.as:563]

  to spark.components::RichText/createTextFlowFromContent() [E:\dev\hero_private\frameworks\pro jects\spark\src\spark\components\RichText.as:1219]

  to spark.components::RichText/commitProperties() [E:\dev\hero_private\frameworks\projects\spa rk\src\spark\components\RichText.as:1015]

  at mx.core::UIComponent/validateProperties() [E:\dev\hero_private\frameworks\projects\framewo rk\src\mx\core\UIComponent.as:8095]

  at mx.managers::LayoutManager/validateProperties() [E:\dev\hero_private\frameworks\projects\f ramework\src\mx\managers\LayoutManager.as:597]

  at mx.managers::LayoutManager/doPhasedInstantiation() [E:\dev\hero_private\frameworks\project s\framework\src\mx\managers\LayoutManager.as:783]

  at mx.managers::LayoutManager/doPhasedInstantiationCallback() [E:\dev\hero_private\frameworks \projects\framework\src\mx\managers\LayoutManager.as:1180]

  Any ideas what to do to get this to compile?

  see you soon,

  Jan

  It won't work if you remove the TextFlow element and make a child of RichText. I think that in this case the will have a TextFlow, so if you put the TextFlow in you have a too big number. Try this:

  Agenda

  Agenda

  Agenda

  -robin

• How to resize / stretch XIB controls in the catalog?

  OK, maybe this is a silly question, but I simply can't understand!.

  What setting should I put in XCbode Interface Builder (using XIB to the catalog, no Storyboard) to have a repeating control / resize with parent control.

  Setting the option left / right in the dock just option autoresize left or right, it is not stretch it.

  For example, in the simple Hello everyone, I want the box to stretch with the size of the window main and the label and button to stretch in width. This should be so simple.

  

  Welcome to the wonderful world of constraints.  Control-drag between two user interface elements will give you a list of constraints to choose from, allowing you to define the relationship between the objects.  See using Xcode or Apple Auto layout Guide for more information.

  Alternatively, you can disable the automatic layout (in the file Inspector tab) and use the old shock absorbers and springs.