JDeveloper 11 g - value of bean to access after the method call.

Similar Questions

• To access a page method call parameters jsf page fields

  I have a workflow with a single method, call the execution after a point of view (jsf page).
  
  The view is a jsf page that allows to edit several fields to then filter a view object. This inputtext fields - components in general-have no connection.
  
  The next step in the workflow is executing a method call that takes these parameters - values entered previously in the jsf page - and to run a vo.setwhere and then a vo.exeuteQuery methods but I need the input provided in the previous page. I don't know what is the best method to get access in the ADF.
  
  I usually pass parameters to the method call in the page 'Change the binding of the Action', section 'settings' via EL expressions.

  You can have a support with scope pageFlow bean and bind the attribute to the property value as John mentioned. However, if you do not want to generate a bean, you can simple binding to a pageflow scope variable (might be created automatically).

  Something like

  value="#{pageFlowScope.someVariable}"
  

  and then for the methodCall activity, set the value of the parameter to the same as above EL.

  Arun-

• How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  I use JDeveloper 12.1.2.0.0

  < af:button id = "tt_b2".

  rendered = "#{attrs.nextRendered} '"

  partialSubmit = 'true '.

  action = "#{attrs.backingBean.nextAction} '"

  Text = "next".

  Disabled = "#{attrs.nextDisabled}" / >

  private static final String NEXT_NAVIGATION_ACTION = "controllerContext.currentViewPort.taskFlowContext.trainModel.getNext";

  public String nextAction() {}

  If (validate()) {}

  updateModel();

  Return NEXT_NAVIGATION_ACTION;

  }

  Returns a null value.

  }

  Use case is made for model train, which is being implemented based on this blog: http://javacollectibles.blogspot.co.UK/2014/10/ADF-train-template.html

  We define a generic action following in the model, but the action must be called under certain conditions, based on the question of whether all validation controls had been passed on no.

  You can do this in two ways:

  1 returnValue = (String) ADFUtils.invokeEL("#{controllerContext.currentViewPort.taskFlowContext.trainModel.getNext}");

  return returnValue;

  2.

  public String getNextTrainStop() {}

  String nextStopAction = null;

  ControllerContext controllerContext = ControllerContext.getInstance ();

  ViewPortContext currentViewPortCtx = controllerContext.getCurrentViewPort ();

  TaskFlowContext taskFlowCtx = currentViewPortCtx.getTaskFlowContext ();

  TaskFlowTrainModel taskFlowTrainModel = taskFlowCtx.getTaskFlowTrainModel ();

  TaskFlowTrainStopModel currentStop = taskFlowTrainModel.getCurrentStop ();

  Terminus of TaskFlowTrainStopModel = taskFlowTrainModel.getNextStop (currentStop);

  nextStopAction = nextStop.getOutcome ();

  _logger.fine ("train, next stop:"+ nextStopAction ");

  Return nextStopAction;

  }

• How do the box values ring to have figures after the decimal point

  How do the box values ring to have figures after the decimal point

  Thanks in advance

  Control properties editor:

  Change the representation in the floating point data Type tab type, DBL will do.

  Then go to the Page of display Format and increment 'Numbers' to something greater than 1

  That toggles the column of values on the tab change the items to % .6f, or 6 digits of precision. Uncheck sequential following, values and you're there.

  If you think that's too restrictive, go back the display Format, then select if rating and you can type anything (but, the editor has a hissing fit, so you must load chains and property [] with a property node values programmatically)

  I've been struggling to get OR improve this editor of properties of the years!

• To access the bean viewScope in the method call

  Hello
  
  I use Jdev 11.1.1.6.0
  
  I have a tf1 taskflow with a fragment of page say test.jsff and test.jsff has 2 regions TF2 and TF3.
  
  TF2 has test1.jsff and then calling the method
  TF3 has test2.jsff and then calling the method
  
  My idea is to define a bean viewScope in tf1 and access since the call to the method of TF2 and TF3 to store specific data TF2 and TF3 beans viewScope...
  
  My problem is when I do the following code inside the method of TF2... I get null for the viewScope bean. I'm doing something wrong here... The regBean is coming with the null value
  
  FacesContext fctx = FacesContext.getCurrentInstance ();
  ELContext elctx = fctx.getELContext ();
  ExpressionFactory expFactory = fctx.getApplication () .getExpressionFactory ();
  String tfName = (String) RequestContext.getCurrentInstance () .getPageFlowScope () .get ("name");
  ValueExpression ve = expFactory.createValueExpression (elctx, "#{viewScope.registerbean}", Object.class);
  RegisterBean regBean = (elctx) ve.getValue (RegisterBean);
  
  
  Thank you
  Rambeau

  Each page has its own scope of view, which will disappear when viewId changes (when the user page)
  You can use session scope (but then you should take care of cleaning), or you can use another parameter to the method.
  Maybe this can help: http://andrejusb.blogspot.com/2011/02/adf-region-communication-data-exchange.html

  You can see time scope of beans on the following diagram:
  http://docs.Oracle.com/CD/E15051_01/Web.1111/b31974/adf_lifecycle.htm#CHDGGGBI

  Dario

  Published by: kdario on November 2, 2012 14:34

• How to pass attribute values after ExecuteWithParam to the method call

  Hello
  
  I use Jdev 11.1.1.6.
  
  My use case, is that I have mainPage BTF which has ExecuteWithParam as the default activity. It filters the VO using params. I have a requirement to store some of the attributes of current line to pageFlowScope which must be sent to several taskflows child.
  I present a method call after the ExecuteWithParam event and before the page is rendered but do not know how should I pass the current line (or something) in this method call to store values on pageFlowScope.
  
  What should I switch to this bean managed to store values on pageFlowScope? Is there an alternative?
  
  Thank you
  JAI

  I see two possible ways to get to the attributes. First of all, you can get the iterator current rank and get attributes here. Secondly, add you links attribute in the file pageDef methods for all attributes that you are interested in. Then you access it by using the attribute binding. I never tested the 2nd method, but I guess that the framework will fill the attribute links, as it does in a normal page.

  Sorry, can't give you enjoy this code adds that I'm not in front of a PC.

  Timo

• Passing parameters to the method call in expressions of value

  JDeveloper 11.1.2.1.0 does support the feature of passing parameters to method calls in expressions of value in JSF pages? AFAIK this is JSF 2 version it and it should support this feature. Unfortunately when I put in a JSF page the following tag
  < h:commandLink value = "#{row.employeeId}" action = "#{empBean.showDetails (row)}" / > "
  The page does not work. Any ideas on this point?
  
  Thank you to everyone.

  Hello

  The functionality you need is defined in JSR 245.
  If you need to wait for it to become part of the standard, it will be included in JEE6
  I don't know if 11.1.2.1.0 uses JEE6 standard...
  You can try this other thing,
  http://www.coderanch.com/t/213290/JSF/Java/why-JSF-calls-method-parameter

• No Internet access after the connection of the cisco vpn client

  Hi Experts,

  Please check below config.the problem is vpn is connected but no internet access

  on the computer after the vpn connection

  ASA Version 8.0 (2)
  !
  ciscoasa hostname
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  IP 192.168.10.10 255.255.255.0
  !
  interface Ethernet0/1
  nameif inside
  security-level 100
  IP 192.168.14.12 255.255.255.0
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  2KFQnbNIdI.2KYOU encrypted passwd
  passive FTP mode
  standard access list dubai_splitTunnelAcl allow 192.168.14.0 255.255.255.0
  INSIDE_nat0_outbound list of allowed ip extended access all 192.168.14.240 255.255.2
  55.240
  pager lines 24
  Within 1500 MTU
  Outside 1500 MTU
  IP local pool testpool 192.168.14.240 - 192.168.14.250
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access INSIDE_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout, uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.14.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac setFirstSet
  Crypto-map dynamic dyn1 1 set transform-set setFirstSet
  Crypto-map dynamic dyn1 1jeu reverse-road
  dynamic mymap 1 dyn1 ipsec-isakmp crypto map
  mymap outside crypto map interface
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  crypto ISAKMP policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  a basic threat threat detection
  Statistics-list of access threat detection
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  !
  global service-policy global_policy
  password encrypted user testuser IqY6lTColo8VIF24 name
  username password khans X5bLOVudYKsK1JS / encrypted privilege 15
  tunnel-group mphone type remote access
  tunnel-group mphone General attributes
  address testpool pool
  tunnel-group ipsec-attributes mphone
  pre-shared-key *.
  context of prompt hostname
  Cryptochecksum:059363cdf78583da4e3324e8dfcefbf0
  : end
  ciscoasa #.

  Hello

  Large.  Try adding the below to make it work

  vpn-sheep access list extended permits all ip 192.168.15.0 255.255.255.0

  NAT (inside) 0-list of access vpn-sheep

  Harish

• No Internet access after the update from Windows 7

  Since the update of Windows 7 (from my list of update I can not single out one specific) sent 15 Dec - my computer will access my internet connection - the only way that I can access is to do a system restore to a point to Dec. 14 or before - I have a new computer - and no new programs have been added to the system during this time - it becomes troublesom because I have to constantly to do system restore to get online

  I called Support Center, Monday - and after having him work for almost 2 hours, we decided that the KB2467659 update is the culprit and we have disabled this update to be installed - HOWEVER the windows update program was H - LL BENT on installing this update - the technician called me back 2 days later Wednesday--and we did other things magic to ensure that this implementation to day has NOT been installed again - so far (knock wood) No recurrences of the problems

• ReadyNAS Pro 2 - Can't access after the factory reset/install

  Hey all,.

  Have a Pro 2, which responds more recently. I can factory reset it and start the installation process in RAIDar. But when he sets up the discs that it disappears in RAIDar and I can't access the web interface (responds to the pings, however).

  Problem of firmware or RAM?

  You came across a problem that we see in some cases, when do a factory reset. It should now be fixed.

• Vista wireless loses Internet access after the mode "Eve".

  Environment:
  HP Pavilion dv2610ca notebook PC, broadcom 802. 11 b / g adapter, Vista Home Premium 32 bit SP2, Siemens Gigaset SE567 router/modem.

  Problem:
  I can usually connect wirelessly to my home network and to the Internet whenever I start my computer. However, I have close the lid and leave it in standby mode, I can't access Internet after I opened the lid and the system wakes up. The system connects to my home network but cannot access the Internet. It shows a Local access only.

  Diagnosis and repair fails generally, telling me that I have a problem with my router. Disconnect, then reconnect usually works. My router power market also works.

  I saw lots and lots of issues with Vista wireless networks and I followed several of the recommended actions:
  -updated the driver broadcom
  -reset the IP stack by using the tool "Fixit" of Microsoft
  -disabled the use of IPv6 in two by disabling the check marks in the related devices and changing the registry TCPIP6 parameters
  -modified the registry to activate/disable the DHCP broadcast flag in the TCPIP Interfaces
  -J' tell the system not to disable the card Broadcom, but the "Power management" tab mentioned in some articles does not appear in its properties. The only reference to power is "Minimum energy" under the "Advanced" tab, then I disabled who.

  Nothing has solved the problem.

  Has anyone else had this problem and fixed it?

  I'm not a technical Wizard, so please provide instructions for any action that you suggest.

  Thank you.

  I replaced the Siemens router/modem provided by my ISP (Telus) with an old D-Link router and separate modem 3Comm I had been using a couple of years and the problem seems to have disappeared.

  I'll close this thread on the assumption that the problem will not rear its ugly head again.

• Unauthorized access, after the trial expires

  I got the trial of DPS, it is now expired, so I see access not allowed - you have no permission message, etc. I tried several times to contact Adobe by various means - no response - no surprises! I'm a DPS Certified Adobe instructor, I need to see the/train customer perspective in what is happing in the world of Adobe DPS - I can't, but I can say for them, it's that there are great alternatives out there, Twixl, Aquafadas, In5 Mag +, etc. These people will talk to you, they will be transparent about everything, including costs. I agree that DPS 2015 should be only price wise for a certain segment of the market and Adobe apparently now have no interest in the market of the other segments, but come on Adobe - talk to us and let us at least power free trial/test/train your product.

  
  

  In the words of Pink Floyd "Is there anybody out there?

  Hello Peter,.

  You can contact me at ktukker (a) adobe.com? Please provide the information that you used to register for the 30 day trial.

  The 30 day trial is available to freely test the product. On request, the trial can be extended to 60 or 90 days on request in order to allow more time evaluation.

  With sincere friendships.

  KlaasJan Tukker

  Adobe

• Tecra A11 - 1EG - cannot be accessed after the supervisor setting BIOS password

  Hello, I would like to know if anyone can help?

  We have started to put a supervisor on our laptop Tecra A11 password so that our students can not set passwords on the hard drive, etc.

  To enter the BIOS and set a BIOS password, press us F2 that the machine starts.
  Then we go to the security option, then supervisor password.
  After entering the password we use twice, press us F10 to save etc.

  The machine starts ok and will windows smoothly.

  The problem we have now, is that we cannot go back into the bios at all.
  As machine starts support us on the "F2" key as before, but unlike previously the screen remains white and the "Toshiba leading Innovation > ' screen no longer appears."

  If we keep our finger on the F' key or continue pressing the laptop restarts just without ever get to the BIOS screen where I guess that get us ask the supervisor password that we set earlier?

  Is there another key, that we should be pressing that start the laptop?

  I would add that we have added a password of supervisor for the screen of security BIOS on three of our laptops and all three have the same problem.

  Thank you

  Steve

  I think this should be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.

  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key

• Satellite A100-386: no internet access after the new XP installation

  Hi everyvody!

  I can do it myself, so I ask for your help!

  I have a Toshiba Satellite A100-386 with windows XP MCE.

  I recently had a virus, so I formatted my drive. I don't have the installation CD with me, so I install XP.
  I have two disc on my computer with the system and the other with the documents.
  Then I install ALL the drivers I could find on the Toshiba site for my computer.
  This means that the PSAA9E. The problem is that I have no internet! I don't understand why.

  When I look in computer management, I have no ethernet, controller mass storage controller and network controller.
  I have zone alarm as a firewall and an antivirus avast!

  I disabled avast to be sure that he's not in it but no result...
  In Thoshiba drivers there is also something to update the BIOS.
  I did it but I didn't change. I hope the problem here not there...

  It will be really nice to help me ^^

  Hello

  I think that you just have not installed the right driver LAN and WLan driver

  As much as I know this laptop supports Intel Pro 100 Lan and WiFi Intel 3945ABG card card

  Please visit the European driver Toshiba page again and download the compatible network driver and the driver WLan.
  Unpack the packages, then install it.

  Finally check again if the LAN and WLan cards were recognized in the Device Manager in network adapters.

  Good bye

• lost internet access after the connection to the server

  Have had this problem in the past and in the hope that a workaround is available.

  MAC OS X El Capitan worm 10.11.2 runs and loses the Internet when connected to a server/sharedrive(on Microsoft Windows environment).

  You asked the same thing, or a similar, issue in October 2014. What happened after that?