JDeveloper DESIGNWEBCENTERPSPACES.jws question

Similar Questions

• WARNING: JDeveloper 11.1.2.0 gives a warning with jdk 1.7

  I installed JDeveloper 11.1.2.0 with pointing to jdk 1.7 jvm.
  He always gives a warning message at the beginning saying that the jdk is not certified and jdeveloper may not work properly.
  However, when I continue despite warning it starts jdeveloper.
  
  My question is are will have problems with all the features of the JDeveloper so I continue to use it with jdk 1.7?
  Can I download jdk 1.6.xx?
  If so how can I change the jdeveloper to point to it?
  
  Help, please

  You can even in jdev.conf file to point to the correct jdk

  Yes, but... what happens if the built-in WLS has already been built? That will not change it to the JDK supported.

  I stand by my original comment - the most foolproof way to do this: uninstall JDeveloper and reinstall it with the correct JDK

• ADF Logger | How to configure Weblogic Server

  Hi all

  I use JDev 12 c and weblogic server 10.3.

  I have configured the recorder in my local, using logging.xml and print newspapers in specific file. which works fine locally.

  Now, I have to implement the same stand-alone weblogic Server (production).

  I understand that by the link below is, I'll have logging.xml in the server as well and I have to configure the same setting in weblogic server.

  JDeveloper frequently asked Questions: FAQ #33 - how to set up the recording of WLS, PT. 3 Diagnostics ADF

  But I don't see any of the weblogic server logging.xml file.

  Please suggest how can I implement the same in weblogic server.

  Thank you

  Vieira

  Please find below some notes on how to tune your record using Enterprise Manager on a stand-alone Weblogic Server:

  ACTIVATION DEACTIVATION of Weblogic logging useless for Production using Enterprise Manager

• Update EO & VO

  Hi all

  1 - in DB. We have a table as an employee

  2 it contains (name, District or State)

  3. we create EO, VO for the employee table

  4. we create EmployeeVO as a form on the page.

  5. in this form page, run the Perfect page

  6. If I change the name of column DB as

  Name as EmployeeName

  7. now run this form page. Its getting error like SQLSynataxErrorException

  8 - How updating EO & VO. ?

  The components of the ADF have been refactored?

  JDeveloper frequently asked Questions: FAQ #20 - components how ADF refactor in JDeveloper

• regarding mobile ADF

  I want a mobile application for those who want to use jdeveloper that my question is possible to use jdeveloper to a mobile application without breaking ADF mobile license?

  If you use don't not ADF mobile, I'm not going to recommend that you do this. JDeveloper is good, if you are using ADF mobile technolgoy.

  Why you want to use jdev only, when you use do not adf mobile?

• Need help to install BPEL please

  Hi friend
  Good day everyone, I need your support and your help, I want to install BPEL pleaseeeeeeee help me on...
  
  My work done until now and gets the failure...
  
  I put fallow document Crystal Train its good... but the scene atlast I was supposed to for download OSB 11.1.1.3 but but this version was unable to download that, up to now, I decided to go with OSB 11.1.1.4 archived iam...
  
  I have some Question about the installation?
  
  (1) in the Train of Crystal report download OSB came step 12... before to do this, that I have completed 11 steps
  It's
  
  Step1:Oracle Database 10 g Instructions == > DONE
  
  step 2: repository creation utility
  I downloaded and installed
  Repository creation utility (11.1.1.3.3) = > (ofm_rcu_win32_11.1.1.3.3_disk1_1of1)
  
  step3:Oracle Server Weblogic 10.3.3
  I downloaded and installed = > WLS 10.3.3 = > wls1033_win32
  
  Step 4: Oracle SOA Suite 11.1.1.2.0 / / I have downloaded and installed
  Step 5: upgrade to Oracle SOA Suite 11.1.1.3.0 //after SOA 11.1.1.2.0 I've updated SOA 11.1.1.3.0
  Step 6: Creation of the field / / I did the
  
  Step 7: Verify the Installation of the server administrator
  
  Step 8: Verify the Installation of server SOA
  
  Step 9: Verify the Installation of the BAM Server
  
  Step 10: Install JDeveloper / / jdev 11.1.1.3.0
  
  Step 11: SOA Extension for JDeveloper Setup
  
  MY question
  ============
  (1) Ofcourse OSB 11.1.1.3 isn't available, so I don't have any other appointments, I need to download OSB 11.1.1.4
  If want to install OSB 11.1.1.4 What are step I want to change? in the current stage I put fallow
  
  (2) what are the software I want to 'uninstall' of which I have already installed?
  
  (3) that I want to uninstall everything I installed...? no problem I can do...
  
  (4) but for OSB 11.1.14, what are the necessary software... so that I can return to the back of the software instead of download once again
  
  (5) OSB 11.1.1.4 support WLS 10.3.4 I knew that... .so for SOA costumes, UCR, Jdev what are the software he's it supports?
  
  (6) I can't any related document were I can find the steps to install the BPEL process
  
  (7) that I want to move forward
  
  Please share your knowledge... .without me know what can done in my question
  
  Your help will be very appriciable
  
  I hope that the best way to all your guys...
  
  Thanks in advance
  
  Thiliban
  
  [email protected]

  If you try to install this, for the first time, which means that you have not deployed or installed which must be saved, go to just uninstall and install version 11.1.1.4 early.

  To this day, if you read this guide, that you mentioned, feel comfortable with it, try the next, but with the new products. It is almost the same.

  Pablo

• Resolution of browser settings

  Using the current version of jdeveloper, ADF
  
  My question is how can I access a browser resolution setting?
  
  
  According to the resolution of the browser setting, I want to change the number of rows displayed.
  
  Chuck

  http://www.howtocreate.co.UK/tutorials/JavaScript/BrowserWindow

  http://www.pageresource.com/JScript/jscreen.htm

• JDeveloper ide question - attributes sorted 12 c

  Hi all

  This may seem like a stupid question, but how do I cancel the sorting of attributes to a display object or an entity objects?

  Thank you

  After following file .jdeveloper for the changed files and playing with the sorting, I found that the files that change when you sort the attributes or change the column width in the IDE.

  .. /system12.1.3.0.41.140521.1008/o.BC4J/jboVoAttrColumn.properties

  and

  .. /system12.1.3.0.41.140521.1008/o.BC4J/jboVoAttrColumn.properties

  You can change the value first after the sign '=' to 'NAME' to .

  Alternatively, you can delete the two files and do with it!

• JDeveloper Hello World Tutorial - Property Inspector question

  Already posted in the JDeveloper Forum (Re: JDeveloper Hello World tutorial - property inspector question but advisable to post in the Forum OA instead...)
  
  I downloaded and unpacked JDeveloper via:
  
  Patch 8431482 JDeveloper 10 G with Extension OA ARU to R12.1.1
  
  The JDeveloper I use is:
  

  Studio Edition Version 10.1.3.3.0.3
  Build JDEVADF_10.1.3.3.0_NT_RELEASE

  I unzipped JDeveloper in a "jdev" folder on my drive D:\, and project files are stored here:
  D:\jdev\jdevhome\jdev\myprojects
  
  I am following the tutorial "Hello World":
  /jdevdoc/Webhelp/Toolbox/Labs/lessons/Hello/gs_hello.htm
  
  I created a new project:
  

  Name: HelloWorldOAProject
  Default Package Name: oracle.apps.ak.hello

  And a new Page:
  

  Name: HelloWorldPG
  Package: oracle.apps.ak.hello.webui

  However, when I get to:
  
  Step 4. Change the region (upper level) Page layout
  
  It is said:
  
  JDeveloper automatically creates your area of provision of high level for you page when you create your page.
  
  The property inspector in the manual shows various headings:
  

  - General
  - Functional
  - BC4J
  - Navigation
  - Visual
  - Personalization

  On my test version, I only have these topics:
  

  - General
        Attribute Set
        OA Extension Version
        File Version
        Comments
   - User Defined
        Attributes 1 to 15

  As I don't have the same positions in the property inspector, I can't continue with the tutorial.
  
  I was wondering what I could do wrong?
  
  Any advice much appreciated!
  
  Thank you

  Hello
  When you select the name of the page in the window structure, it will show only the headdings 'Général' and 'User Defined'.
  When you select the level region (pagelayout) top of page in the structure window then it will show "General", "Functional", 'BC4J', 'Navigation', 'Visual', "customization" etc.

  Kind regards
  Naren.

• Is it possible to load an application without .jws file in JDeveloper?

  Hello
  
  Although I struggled through the development of a simple application that has been put into production, I'm still a beginner in web applications development and JDeveloper (10.1.3.4) is the only IDE I learned to use. At the end of the first application, I went back to read a book (JavaServer Faces, The Complete Reference, 1st ed., by Chris Schalk) to learn JSF, because JDeveloper assumes the user already knows JSF, but I do not and often mix up to what JSF and what are the improvements by ADF.
  
  Having introduced the general concepts of the JSF in the first eight chapters, the book begins to illustrate the details of the working mechanism of the JSF in Chapter 9, using a sample application. To use the sample application (code is downloadable from the website of the book), it is necessary to use either Ant or use Spring Hibernate. I know none of them. JDeveloper is the only thing I know. If I start reading the Ant and Hibernate implementation, I will disappear again and again until I can possibly go back to JSF, and ADF, while he seems to be the work of Ant and Hibernate were all built in JDeveloper.
  
  I wonder if I can use JDeveloper to follow the example of application of the book. But the code provides the author has not a .jws file cannot be loaded by JDeveloper and, even if it is possible, the directory structure from the code files is different from that of JDeveloper.
  
  I wonder if the people here were in the same situation that I am now and have discovered a way? Or are there other books or sources appropriate for a learner like me?
  
  JDeveloper is awesome (and of course with the help of the great people here on the OTN forum, I am grateful towards) because it protects all the technology and allows a person like me who knew almost nothing about web technology to focus on the business logic and complete an application. It defeats the purpose if, to learn how to better use JDeveloper, I have to go back to primary school and to trace the evolution of web technology all the way to JSF, and ADF. It would be nice to do, but it will take too long.
  
  Thanks in advance!
  
  
  Newman

  Try to go into the properties of project-> libraries and add the JSF library to your project.

• newbie JDeveloper Setup question

  Hey people.

  I'm a new ISV SE working to familiarize myself with things.

  Environment:

  Windows7 64 bit

  Java version "1.8.0_60".

  Tries to install:

  Installing Oracle JDeveloper Studio

  jdev_suite_121300_win64.exe

  When I run the installer, it dies on the market 'Prepare' with this message:

  java.io.IOException: C:\.oracleprinters\Middleware\Oracle_Home\inventory\Queries\jdkGeneralQueries\12.1.3.0.0\jdkGeneralQueries.jar (the system cannot find the path specified)

  My machine has a C:\.oracleprinters directory, but this subdirectory is not there.

  Advice would be useful?

  
  Carl

  Have you been asked to a Jdev installation folder in?

  You have another installation of Oracle on this pc?

  I never heard of puff, a folder named .oracleprinters, but it can be created by the installer itself. If it is empty, you can remove it and try again.

  Did you start the installer as an administrator?

  Timo

• jDeveloper debugging question

  Hello

  I'm new to the development of the OFA and am under jdeveloper 10.1.3.3.0 for development. I have managed to download code from the server on my local and successful machine to launch the application from my office as well (loan application). I want to know how to enable application logging or debugging functionality so that when I run the application, I can see the activity on the jdeveloper console? In one of the site he talks about changing the project properties (Configuration-> development-> Runner) and add a parameter - dbjo debuggeroutput = consile. However, in the current version of jdeveloper, I don't see this option at all.

  Can some please provide some guidance?

  Thank you

  Hello

  See this link:

  Apps - OA Framework - 7 different Debugging Techniques

  Sushant-

• Setting up the environment of Applications Dev fusion Jdeveloper - version questions

  I am facing problems regarding the versions of installed packages.
  
  https://blogs.Oracle.com/fadevrel/entry/jdeveloper_and_fusion_applications_explained
  
  The post was very useful. But the expansion of fusion development pack causes problems of version.
  I installed 11.1.1.6.2 Jdeveloper on 32-bit Windows computer. I installed the packages, but four packages are in trouble.
  One of the package is not installed because the minimum version required for oracle.ide (package) is 11.1.1.6.62.98 and existing is 11.1.1.0.11022.xxxxx(I j'ai oublié le nombre). How to get around these problems of version. Unless I have install the fa_dev_bundle.zip, I can't have a role of Fusion application customizations and extensions, right?
  
  To summarize, there are some issues with the versions. Versions are earlier than necessary or there is any required version. How to solve this?
  
  I would be happy if you can point to an another forum/page/documentation that can help me find a solution.
  --
  Harsha

  Harsha049 wrote:
  I would be happy if you can point to an another forum/page/documentation that can help me find a solution.

  Harsha,

  I'm glad you found my blog useful. Have you seen the second part that I just posted a few days ago by chance?

  https://blogs.Oracle.com/fadevrel/entry/jdeveloper_and_fusion_applications_explained1

  It covers installation of all extensions and configuration of the built-in WLS field.

  I hope this helps.

  Oliver
  Fusion applications Developer Relations
  http://blogs.Oracle.com/fadevrel

• JDeveloper 11.1.1.5 questions

  I have a process BPEL 518 lines long, so it is quite complex, but nothing spectacular.
  
  JDeveloper becomes very slow, whenever I need to change this BPEL process. I increased allocation mem JDeveloper up that he would, about 1024 mb. Very slow I mean I click a scroll for example bar and he answers 5-20 seconds later, it becomes frustrating very quickly. This version of JDeveloper looks also extremely bug, the particular expression builder.
  
  Is that what I can do to improve performance before the upgrade to another version? (Build is automatically disabled)
  
  I have 8 GB of ram and a decent Quad core CPU, then the development computer is not the problem. The CPU usage goes to 100% whenever I discovered BPEL.

  Hello

  Go to JDev tab properties and reduce the level of mapping and delete also a correspondent, the proxy settings that are included in your JDev as your proxy details default setting.

  Also remove the marking of the composite would also solve some problem of memory.

  Hope this helps your problem...

  Reg,
  MS

• Question of JDeveloper display preferences

  Hi all
  
  I just started using JDeveloper (version 11.1.1.2.0), and one thing that bothers the heck out of me, it's the line dotted above each method. I went so all the menus preferences and searched online, but I can't seem to understand how to turn off this option! It looks like this:
  
  .......................................................................................................................................................................
  public static String getObject1 (HttpServletRequest request, String param_name) {}
  return getParameter (request, param_name, null);
  }
  
  .......................................................................................................................................................................
  public static String getObject2 (HttpServletRequest request, String param_name, string default_value) {}
  return getParameter (request, param_name, null);
  }
  
  .......................................................................................................................................................................
  public static String getObject3 (HttpServletRequest request, String param_name, string default_value, int param3) {}
  return getParameter (request, param_name, null);
  }
  
  When you turn on the right margin to 80 characters and line numbers, then, it looks like a spreadsheet application and is terribly distracting.
  
  Can someone help me?

  This setting is configured here: Tools-> preferences-> Code Editor-> syntax colors.

  Choose the 'Java members Separator' and delete the line style.