jerk strange movement clip directly after having chained transition
Hi guys,.
I was going along very well add clips to a timeline, then adding a transition 'cross dissolve"between each of them. each clip is about 3 to 6 seconds. These video clips are added to the timeline on the top audio locked with a song about it. I use the "overlay" feature to add the clips.
On some clips, there is a strange movement jerky at the beginning of the clip and just after the transition. the scene seems to jump to any 2-3 images.
so, I deleted the fade ran into and reinforced through each image one by one. No jerkiness. then I put in the transition and it's just after the beginning of the clip during the transition.
This does not happen on all of them, some. I tried to cut some framing away the video choppy, reducing it. Add the transition, now choppy new part is there.
Has anyone seen this? What is a setting? I use PPO5.5 on a Mac OS 10.6.6 / Intel 2.66gz / 8 GB of memory. a free 1 TB with 600Gig drive.
Thanks for any input or advice!
OPP creates the handle? If so, it is not doing things.
The "handles" are there in the original media, all right. The problem is the part of the clip is another blow, this is what you see in the transition. You must shorten the time you use. Developed at least half the length of your transition spent the beginning of the photo you want to use and end (point) at least half the length of the transition before the next shot.
Yes, the Ripple Edit can be used to do this. The help file will have the details.
Tags: Premiere
Similar Questions
-
Movie Clip Visible after 5 sec
Hello
I have 3 Movie clips foam1, foam2, foam3
they are visible after 5 sec on the hit with scratch movieclip test
scratch.onEnterFrame = function() {}
this.startDrag (true);
};
scratch.onRollOver = function() {}
If (this.hitTest (_root.soap1)) {}
foam1.gotoAndPlay (2);
}
else {if (this.hitTest (_root.soap2))
foam2.gotoAndPlay (2);
}
Else if (this.hitTest (_root.soap3)) {}
foam3.gotoAndPlay (2);
}
};
then use
setTimeout(visibleF,5000,whatever)
-
He's saying that he cannot save the movie to the specified location. Ensure that the use of original source of your movie files are always available (which they are!) that the backup location is always available - what it means?
Pls help
Thank you inadvance
The most common reason, you see this is because Movie Maker is unable to manage one of your source files. Movie Maker prefers to video .wmv and .wma for audio, so if you use other types of files in WMM 2.1, you should try to convert them to these types of files first. Freemake has a couple of converters (Freemake Video Converter and Audio Converter from Freemake) that can do this quite easily. Or you can look around.
Another reason, you could see it is if your project has a lot of pictures. The version of XP Movie Maker (WMM 2.1) was not too well manage memory and could not refuse to save your movie once it takes about 100 photos. If this is the case, try to divide your project into two (or more) separate projects and recording each part as a separate sequence. If it works, at the end you can put them back together by creating a final project and adding partial movies created previously.
-
Noob on chain and Movie Clip symbols question
So, I have a table containing the names of occurrence of some movie clip symbols... I want to catch a random and perform operations above.
So, I put a table with string names and grab one at random.
var log_array:Array = ["truckStop_mc", "blackJack_mc"];
Index number: var = Math.round (Math.random () * log_array.length);
I then used track to make sure that I'm grabbing the name correctly... it is for me the names...
trace (log_array [index]);
I then try set the x and y property
log_array [index] .x = 399,4;
log_array [index] = - 3 there.
I get this error when running:
Cannot create the x on string property
I tried to store only the clips themselves as objects but it wrong as well.
var log_array:Array = [truckStop_mc, blackJack_mc];
Is there a way to store the objects themselves in the table, or is it possible to convert this string to the object.
Something like
var obj:Object = getObject (log_array [index]);
obj.x =...
any help would be great... I was blocked a bit now.
Thank youyou need to store the instance name of the MC as you have in the second version here, as in:
var log_array:Array = [truckStop_mc, blackJack_mc];
... However the RND formula should be adjusted to:
Index number: var = Math.round (Math.random () * (log_array.length-1));
... And when you set properties on an MC XY, you need a stroke of underscores, differeing from the XY of an object property, as in:
log_array [index] ._x = 399,4;
log_array [index] ._y = - 3; -
How to change the alignment of the existing "Movie Clip" symbol Point?
Hi all
by: Adobe Flash Professional CS6
My Flash program contains a 'Symbol' MovieClip and then to the breast of this "Movie Clip" there are 3 layers, which are about 6-7 long chassis.
Right now is size of video Clip "1680 x 1050" and it is centered on the stage. But the registration point is in a strange situation. It seems
as it is biased a bit and to the right.
I was wondering if there was a way to change the point of alignment in the same way as when you create the symbol (* that is when it shows you the )
points of type "grid" which you click on one of them and it becomes its registration point)? I read about how you can change the registration Point of
by clicking on the Clip and then clicking on Edit > Edit Selected/symbol/In_Place. But when I try that it's really hard to get where I want it to be...
What I want is the upper-left corner of the symbol for the registration Point, which is the top-left corner is "0,0"
Anyway I can do without having to "Hands-free" move image to the Point of alignment... ?
Any ideas/suggestions would be greatly appreciated!
Thanks in advance,
Matt
You can always create another movieclip that you (select the mc and choose create MovieClip) and when you specify the upper left corner to be the alignment point.
-
Strange behavior of Yosemite after restoring from Time machine
Hello
After having passed my MacBook Pro to El Capitan, I tried the same thing with my Mac Mini (mid 2011).
Has not completely, because the system is stuck on the gray screen with the bar locked (10 hours) in advance. Impossible to get on this screen (sometimes P - ram reset restart, try Mode safe without success), I decided to return to Yosemite using my full time Machine backup.
This operation was successful, but with a few strange things:
- Normally, my system language is set to French. But at startup (i.e. asking the password), the system speaks English. It's extremely confusing, because the layout of the keyboard is also different (for example, the first key of the letter is 'Q', where on a French keyboard the first key is 'A', other differences of keyboard also). Once a user is logged on, the system returns itself to the lay-out French!
- The new pit of backup Time Machine does not start. It remains suspended in the "preparation of files for backup" (= free translation).
- The fan is working at high speed.
Repair permissions and restart didn't help.
Someone has an idea?
Details: Mac Mini (mid-2011), Yosemite 10.10.5, 2.3 GHz Intel Core i5
Thanks much, much in advance!
First D1 in the 1st article linked.
Troubleshooting of Time Machine
Solving the problems of Time Machine
Yosemite: If Time Machine still at the stage of the "preparation".
Try a SMC reset. Article covers when necessary, but this will not affect anything.
-
I am unable to return to region 1 after having to change from region 4 to read a dvd for this region, why is there only a limited number of times, you can change a region?
How can I get the option back to region 1, installation is there, but the function is frozen or out of use, why is there only a limited amount of time you can do?
How can I get my Media Player to work again?
very angry. Help, please
Adelina
Hello
1. what operating system is installed on the computer?
2. What are the changes remaining in the below mentioned location?
The functionality of DVD region does not belong to Windows Media Player, it belongs to the CD/DVD drive. It is the manufacturer of the device.
The limited number of changes is by design.
When you navigate to the following location, it gives you this caveat.
(a) open Windows Explorer, right click on the DVD drive.
(b), select Properties, select hardware;
(c)
Select the DVD drive, select Properties(d) select DVD region
Warning: You can change the region a limited number of times.
After changes remaining reaches zero, you can not change the region even after reinstalling Windows or move the drive to another computer.
If the remaining changes are null, unfortunately the only thing you could do, is change the CD/DVD drive.
-
Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.
If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.
Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.
In Windows 7, you can use a command-line high;
http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html -
No video after having replaced the graphics card and power supply
I have a desktop HP Pavilion m9515y PC. The graphics card that came with it (NVidia GeForce 9600 GS, 768 MB) did not suit the minimum specification required by a game that I played. Things in the game has been very slow - I could see a delay of s ~0.5 to move my mouse on the splash screen for the game.
Today, I bought a new graphics (NVidia Geforce GTX 550Ti, 1 GB) card and a Corsair 700W PSU to replace the 350W one that came with the system.
From the outset that I messed up something. It's been a while since I opened the box and I thought wrongly that the top panel (with the rubber surface) to come off before the side panel could be deleted. I removed the two screws now the top panel in place and slipped it in the process it disconnect and two thin black wires which I do not know the function. It was attached near the power button and one was attached to the rear of the Panel. The sons have stripped the ends rather than a connector of some sort and I don't know how they connect back or if they are the cause of the problem that I see now.
In any case, I advanced and removed the old PSU and video card and replace them with the new. Two of them are significantly larger than the components, they replaced, but they managed to adapt with some maneuvers. All cards are well-placed in the PCI slots.
The power is connected hard disk, DVD drive, the motherboard and the new video card. I'm not aware of any other connections that need to be made to food. There was not much clearance between the power supply and the back of the DVD player, but I was able to get the data and clinging to the DVD of power cables.
After having done all that, I hooked my monitor DVI cable, plugged in the power cable and turned on the power. When I plug it in, the power button on the top of the tower is illuminated and the power seems to work. However, my monitor indicates that there is no video signal. I tried to put the old return video card, but I don't always have a video signal. Because I can't get a video signal, I can't tell if the PC is start or not.
Does anyone know the purpose of the wires that were connected to the top of the Tower?
They would cause they cause this problem if they are not correctly connected?
Any suggestions for the possible causes of the absence of a signal from a video card?I just took the PC to a repair shop and it turns out that the problem was quite simple: I don't have the PCU power cable 4 pins hanging. Everything seems to start fine when we hung out at the shop. Fortunately, the place that I took did not even charge me what as they don't charge co-pays and since it is such a simple fix.
Now I feel kind of stupid, but I know better next time...
-
HTML5 Canvas move one image after a period of time
I'm new to JavaScript and html5 Canvas and you want to move one image after a period of time, for example, after an audio clip is finished playing.
I tried: setTimeout (function () {this.getStage () .getChildAt (0) .gotoAndPlay (2);}, 36000);
This code does not work.
The equivalent AS3 is: function wait() {stop (); var myInterval = setInterval (function () {play (); clearInterval (myInterval);}, 36000) ;} / / end of the function wait();}
Thank you.
Is to understand "extended", who looks much more like the ActionScript 2.0. The word 'this' as you have it does not refer to what you think it does. Because it is inside a function (anonymous function for setInterval you did), it comes to this scope.
Two ways to resolve this problem, assign the current scope and use inside the anonymous function or use the shortcut of exportRoot.
affect the scope
This.Stop ();
var _scope =;
{setTimeout (function ()}
_scope.getStage () .getChildAt (0) .gotoAndPlay (2); using the reference _scope retained by the top
(}, 36000);
Or this shortcut in the root scope:
{setTimeout (function ()}
exportRoot.gotoAndPlay (2);
(}, 36000);
-
Move clips on the timeline each in its own way?
Hello
IM asking it's once again on its own thread, I hope someone can answer.
How can I move clips from the bin of media in the timeline so that each clip runs on its own track instead of one after the other on a track?
Thank you
Saami
Select items in the project window,
Right click and click on Create Multi cam source sequence.
You now have a multicam sequence in the project window.
Click on this and open it in the timeline.
-
First elements 10 supports the formats of MOV movie clip?
First elements 10 supports the formats of MOV movie clip?
MOV is really just a wrapper and can contain a wide range of CODECS. Many of them, such as JPEG, Animation, H.264 and many will work well, as long as one has Apple QT Player installed or the installed CODEC need. However, if the file came from a Mac and went to a PC and had been exported to FCP, or similar, it might well be one of the inside of the Apple Intermediate CODEC, and most of the people is NOT available on the PC. In addition, if the file came from FCP, even if a Mac CODEC, which come only from the FCP, there so we could use this program is installed.
This ARTICLE will give you more details on the Formats of files as "wrappers".
Please let us now what's inside this envelope MOV, and someone can direct you.
Welcome to the forum and good luck,
Hunt
-
hide the external swf movie clip
Hello.
I have my main.swf and in the second frame, I load an external swf called first.swf with this method:
[AS] var loader: MovieClipLoader = new MovieClipLoader();
this.createEmptyMovieClip("myGalleryContainerproducts",5);
myGalleryContainerproducts._lockroot = true;
loader.loadClip ("first.swf", myGalleryContainerproducts);
myGalleryContainerproducts._y = 86;
myGalleryContainerproducts._x = 50;
[/ ACE]
In first.swf, I have two clips with instance names ena and dyo
I want in main.swf in the third frame to hide these clips of first.swf (only the movie clips is not the entire .swf) or move (change x and y values) so they hide practically.
All solutions?
Thanks in advance
After the ena and dyo are instantiated, you can use:
myGalleryContainerproducts.ena._visible = false
myGalleryContainerproducts.dyo._visible = false;
-
Terrible lag when editing 5 k mov clips. Pls help me.
Sorry I'm new here. I know I should learn more and find a solution, but currently I am short of time when editing occupied. Pls help me if you can!
My com features is:
Windows 7 Ultimate 64 bit
Intel Core i7 930 @ 2.80GHz
6.0 GB (3x2gb) Cosair DDR3 @ 539 MHz (6-7-7-20)
Gigabyte X58A-UD3R
NVIDIA GeForce GT 240
2 x 1 TB WD Caviar Black-C: for OS, program, pagefile, media Cache
D: for the project, images, preview, and others
* I have look through of many nice topic as Harms and the process of adjustment.
For all I know, my com is not perfect because of the following problems:
1. my ram is small, not the ram of Performance.
2. my graphics card is not supported for GPU.
3. HARD drive no raid. should have as much hard drive.
My problem is:
I found that once I imported 5 k (1280 x 720 50 fps photographed by canon 550 d) MOV clips, my com become laggy, even that I just copy paste n the clips in a sequence different, even begin to apply the effect.
1. may I know what is the main problem causing my lag com?
2. If I am short in budget (spent a lot for the new CMO T.T), which is the positioning just to improve the situation of lag?
Sorry for inconvenience and I hope you guys can help me right now. Million thanks!
If you use more than one sequence in a project then the ram low especially with HD material will cause the problems you are having. Once the ram is exhausted then Adobe will begin using the swap file more on one drive HARD and slowing down all spread. If you can and you want to upgrade your system, you can increase the ram. Otherwise go with Neo scene for now and upgrade later. The time to transcode with Neo Scene isn't as long. I could at least download the trial and see how it works for you.
Eric
ADK
-
How to Type directly after a hyperlink without becoming part of the hyperlink
Hello
I'm working in Dreamweaver and I made a hyperlink. I want to start typing directly after this hyperlink without having the news I type tour in this hyperlink. However, every time I click at the end of the hyperlink, and then press the SPACEBAR and start typing, all what I'm typing also fits into the hyperlink. I know that there is a way around this. Anyone know how? Thanks, Blake
You can switch to code view and start typing after the anchor tag.
Maybe you are looking for
-
How low-level format using the code debugging?
original title: how to low-level format using the debug code? can someone give a code How low-level format using the code debugging? can someone give a code
-
Occurs when I try to install iTunes & Flashplayer. Help!
-
Low battery life blackBerry BlackBerry Z10 Z10.
My brand new z10 was meet some battery problems as I received it. The phone is only 4 hours old, and battery controller shows only 3 hours to 90%. Does anyone else have this problem and if so know how to fix? The unit would be defective?
-
Hi allAdditional registration has been activated at the level of the table for the primary key with the statement belowALTER table < schema >. < table > add additional data log columns (primary key);But under query returns nothingSelect * from DBA_LO
-
Hello, I'm Fabrizia, I can't connect in a photoshop, whenever there is an icon that makes me the monthly payment, but I already paid...Any help?