job cuts coming on the network of a macbook to print spooler

Similar Questions

• network is detected for c7280, but print jobs are sitting in the queue and will not be printed

  The first time in the forum because C7280 is no longer supported. Lasted forever except that updates always seem to bumble. Last update caused printing to sit in the queue instead of actually printing.

  The network is detected thanks to a response I've read similar problem, someone else had. I disconnnected cord power, then pressed on # and 6 at the same time. Network connection is returned after this reset. Thank you for this!  But now this second question described in the first paragraph.  We believe that it is a software problem in the updates.  Any suggestions?  Thank you!

  Ok! Error of the operator on my part! Upon reflection, I realized that the rest of the House is on wifi, our main computer is NOT. Before our disassemble everything, we had the HP hired cable! So, everything is back to normal. Thank you very much for your kind attention. We have still benefited from the previusly information obtained when wifi was not recognized at all, so all is well in the household and everyone is happy now!

• HP Officejet 6500 E709n: HP 6500 E709n software available many ways, seen on the network, but not added as printer

  I'm having trouble with my

  HP OfficeJet 6500 E709N

  With windows 7 home

  on the wireless network with WEP.

  I downloaded the complete solution (more than 200 MB),
  and installed it. Add a device. On network printers "found."
  It is listed. I insist on the printer, then.

  Run Network Diagnostics, going to Printer Set up,
  Detects the printer (to about 42%), "printer setup does not.

  Retry - same thing.

  Use 'HP printer install wizard for Windows' flashes my printer, and
  a for a second progress bar, then shows: 'your download has been cancelled ".

  Retry, it repeats.

  Use HP Print and Scan Doctor 4.6, product selected HP OfficeJet 6500 E709n,.
  "The comprehensive software solution is not installed on your computer", press "Install Software"
  get flash progress bar, then "failed download."

  Thank you for advice or URL addresses of the software I need in the installers.

  Hey @westmj,

  I have another idea to work around the error "printer installation failed. Can I please you try the following steps.

  1. run the installer as per normal

  2. When you get the error message after your network printer has been detected, you should be able to select 'Next' to continue the installation

  3. Once installation is complete the 'Add a device' icon should be on your desktop

  4. click on the Start menu

  5. Select the devices and printers

  6. in the devices window and printers, if you see your HP Officejet please right click and select 'remove an instrument' or 'Remove'.

  7 click on any device in devices and printers under printers and faxes section just to highlight. Click the print server properties above. Click the drivers tab.

  

  8 search for the driver for the HP Officejet 6500 series. If you select it and click delete at the bottom. In the window Remove Driver and package select Remove Driver only. Click OK. Finally, click apply and then OK in the print server properties window.

  

  9. on the computer desktop, click on the link Add a device that was placed there by the installer.

  10. Please follow the instructions on the screen to install your printer on a network.

  Please let me know if this procedure works for you. Fingers crossed!

• Not reflected in the network system preferences utility airport settings

  Airport Express model A1264

  Airport Utility 5.6.1

  Firmware 7.6.7

  MacBook OS 10.6.8

  Hello, I am trying to sort out why the Airport utility settings are not the same as the settings in system preferences > network > airport.  If I make a change in Airport utility, it does not change the settings in advance under network options in system preferences and vice versa.  Network names are the same and all other parameters, except the IP numbers are different. (Note: when asked to "Join other network" one and only network name I entered comes up.) All this occurred as a result of a new service by satellite being installed in our premises (I'm in Australia and we have a 'NBN Satellite' service).  IP address in system preferences > network seems to be the IP number, I received when the new system has been activated and the computer that is directly connected by ethernet cable to the modem.   The IP address of the Airport utility is the Airport Express IP number.  I guess that the first IP address is correct as I can connect the MacBook to the internet via Airport. To complicate things, it is that I have the additional problem of not being able to join the network using my MacBook Pro (OS utility 10.10.5, Airport 6.3.5). I get a message telling me to another computer is using IP number again xxxxxxxx test this last (or something similar).  I did originally a default zero value through the Airport utility menu using the MacBook (actually several times), but no change in system preferences > network settings. I think I should add the MacBook Pro Airport utility on the MacBook (which I have) to join the network created on the MacBook.   I use the MacBook for the e-mail and the spread of the internet, and the MacBook Pro should be able to join the network for software and other upgrades. The Airport Express has worked without problem for at least 4 years on our old satellite service. Thanks in advance for your consideration.

  I'm trying to sort out why the Airport utility settings are not the same as the settings in system preferences > network > airport.

  Setting affects only the Airport express airport utility. They do not change anything on the computer.

  Setting in the preferences of the computer only affect the computer... They do not change anything on the express.

  IP address in system preferences > network seems to be the IP number, I received when the new system has been activated and the computer that is directly connected by ethernet cable to the modem.

  Are you a public IP address on the computer? In the old system, you most likely have a private IP address.

  The computer really should NOT directly connect a modem... only a modem which has several ethernet ie is actually a router.

  That will tend to make it more difficult to set up the express. The express should plug a pure modem... and then the computer plug in the express. In this case, the express would be the main router. (I don't like this setup but because the Express is not powerful enough for this job). As far as your express is the old N a wireless with a single ethernet port.

  Honestly, do you a favor and buy another router from apple... the extreme... If you can't afford a new Gen6 then buy a Gen5 on ebay... around $60... immensely better.

  The express can then extend the wireless... or just simply do serve airplay etc. as part of the network.

  Tell us what model is the modem (+ router?) provided to you by your ISP?

  And if you get a public IP address or private on the computer directly connected to it. We can work out the rest from there.

  I'm in Melbourne... you can email me direct if you need to. Email is on my website.

  s https://sites.Google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

• SOLUTION for your HP printer disconnect and/or constantly disconnecting from the network

  If you are having a problem printing, scanning or fax with any HP printer because of this be disconnected and constantly disconnecting from the network, here again is the fix!

  I thought that this all after several failed attempts with HP Support, my Internet access provider and various troubleshooting tasks including reinstall the HP software and more and more.  Well, through self teaching on internet and exhausting search for 6 months, I FINALLY thought to it.  OMG!  I'm a paramedic (not IT) and a little computer but far not an expert.  I have all of you here!  Nobody seems to have the answer, but I'm sure that I'm doing it to 97%.  Whatever it is, if it please answer and let me know that it worked for you!  :-)

  It doesn't matter if your printer is installed cable or wireless.  You don't reinstall your software, no recycling power of your printers or your router/Modem.  Your printer is unstable on the network and continues to log out or disconnect from the network it is NOT because the software is glitched, it isn't a firewall problem by saying, is not a router problem, is not a problem with your power cord, because most networks use a 'Beach' and IP addresses for security reasons This kind of "cycles" the IP addresses of the devices to reduce the risk of an attack.  A printer is not a threat, but the 'network' don't own human intelligence, so he does not know this.  Here are my step by step instructions on how to basically your printer address IP (static IP) instead of change back through a cycle so drop your printer on the network or disconnected.

  Funny, if you're someone who has had the elements in your print queue, they will not print, and you turn your printer off and on again and suddenly your print... well documents, join my club.  The reason it works is that when you turn on the printer, it starts with the same IP address before cycle.  If you are someone who is sitting there for a while and all of a sudden your printed documents without changing you something... it is because through the cycle of change of IP address, it hits your printers IP address and the network would allow him to print.  Not very funny, I know.  It took me forever to figure out why my printer would print sometimes, but not always.  Since I thought at this point, I can SCAN, PRINT, and use all the features of my HP software installed like HP, Photosmart Essentials Solution Center.

  On your printer, go to menu/Setup/network and press OK.  In the network menu, print a "network configuration page" so you can see the IP address and other settings of your printer.

  Now, back to the main menu on the screen of your printers.  Or you can go to your web browser and type the IP address using decimal numbers too and this will take you to the web page of your printers.  Choose: setup\network, then press OK.  Look for the IP settings and press OK. Choose "manual" instead of "automatic". Manually enter the IP address it as well as the default gateway that you can see the Network Setup page you printed earlier.  Note: If you manually set the IP Address of the printer, make sure that it is outside the range of your router's DHCP. Otherwise you might encounter a problem with IP addresses on your network duplicate. (If you don't know how to do this, write back and I'll explain).  Don't forget to click "save changes".  Now, restart your computer, and print just what you want.  :-)

  A trick I often use with DHCP network printers:
  In printers and faxes, right-click on the printer and select "Properties".  Click Add a new port.  Choose standard TCP/IP port configured for the host name of the printer. Read the host name of the network printer configuration sheet.
  
  Using my method means that you always connect to the printer even if its IP address changes (which can happen with the dynamic configuration). This does not jeopardize the security of your network.  It shows just your printer to stay put and stop traveling the highway of IP address.  :-)

  The DHCP range is the range of IP addresses that the router distributes automatically as devices to join the network.  The DHCP range is determined by the router and each brand has a range that is set at the factory (which can be changed by you).

  Default value for the DHCP of your D-link is 192.168.0.100 to 192.168.0.199.  Thus, outside the DHCP range est.2 a.99.200 a.254.

  Is a handy cheat sheet attached.

  You can change this interval by entering the router settings page - type the router's IP address in a browser, enter the login information and access the DHCP parameter area (varies depending on router, hunting around).

• LasetJet Pro M475dn: Impossible to scan over the network after upgrade to El Capitan

  After that I upgraded to El Capitan I no longer use HP Scan or HP Easy Scan to scan the network more. I can print to the printer, but analysis always results in the page being pulled by the document feeder, but applications just to lock-up without the document showing. Everything worked fine on Yosemite.

  I found a workaround solution that once worked before after a update of Mac OS X (but had to change the name of file, much like the original file has disappeared). Just download the next file on HP (no matter that it is not for your printer; it's not mine either (OfficeJet Pro L7680) but it works).
  
  FTP://FTP.HP.com/pub//softlib/software12/COL51752/OJ-125213-3/HP-inkjet-SW-OSX-Mavericks_v12.34.37.dmg
  
  Disable SIP for this installation and when you run the installation program (do not know if you need to do, but I did anyway). To do this, the instructions are here:
  
  https://forums.developer.Apple.com/thread/3981
  
  When you run the Setup program, make sure you hold the CTRL key when you right-click on it, then click Open in the menu.
  
  Run the Setup program. Be sure to select the HP scanning software and install it. When you get to the configuration of the printer, just skip this step (unless you are using the printer in question). The parser components are what you really want from the printer drivers are already in El Capitan, if you have a HP supported printer. The scanning software will have already installed to the moment you arrive at this screen.
  
  Install the HP Easy Scan on the App Store app (if you get the latest version of the software your front-end). You should be able to run the scanner and scans without restart. I don't know if it will work for everyone, but certainly, it worked for me and keep me until they find what went wrong in El Capitan to disable scanning and scanning capabilities.
  
  SIP turn on again so that your Mac is better protected. We should all work after that. After doing the above, I found that I was able to not only use the HP software, I was able to use Image Capture, preview, etc, to get images from the scanner. Your mileage may vary, but if all goes well it will work again for you all.

• Printer spooler does not work for a single user on the network printer

  original title: very different printer problem

  I have a HP deskjet printer shared from a PC on the network.
  I was informed of a single person could not access error poped by saying "printer spooler does not work.
  I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
  Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!

  If I move my computer witch would allow me to print before there where his computer is my computer prompt same error

  My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network

  Just not this printer

  The computer on the share is is a windows xp sp2 workstation

  The computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.

  My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.

  My next step is to hang the printer until a print area and assign an IP address and finish with the share.

  (Still not sure if it would help or not)

  Any advice is welcome thanks

  It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.

  Hung new switch and all computers works fine now.

• HP 2520HC: install the software of the printer over the network

  Hello

  I use the HP 2520HC series at the office. I use a network connection.

  Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.

  Please help me.

  Hello

  such a USB printer allow only all features on a directly connected USB computer.

  Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.

  You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.

  Kind regards

  Shlomi

• P1606dn is no longer connects to the network

  Hello. Our p1606dn was not sensitive lately. It is connected on the network.

  When I print the test auto/device configuration, it continues to show 0.0.0.0 as IP address. IP set to "manual". I tried all kinds of cables. I can connect other printers on the network with the same cable. Our network environment runs through DHCP, and each device has an IP address propert. How can I change the ip address? When I use the installation program to search for the printer by MAC address, it does not detect it. I had a difficult start. No difference. Any solution? Thanks in advance.

  Well Yes you are not connected to the router with the IP address because it is not valid.  The printer port is maybe bad?  Put the printer to another router and check.

• The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Robear:

  I'll be back of the travel.  I'm after the suggestion of CARI.  Seems to be the right track.

  My print spooler system component is missing from the remote procedure call.  If I restore it, I think that the print spooler is reactive.  Suggestions of curry hit Start, Program Files, accessories and they type net start spooler.  However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.

• Installation of the printer. error: "printer spooler does not.

  Original title: printer Installation

  Windows XP SP3 home edition:

  Software printer installation error message, "printer spooler does not" no printer is installed or deposited.

  This suggestion can help.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• Start the print spooler. If it has changed

  The way the departures of up to changed print spooler? I'm sure that if you have created a printer on the computer share and on computer B that are linked, this computer only had to be fed up to let computer B using the printer. It seems now that computer as a simultaneous connection of the needs. Is this correct?

  Hi JayWubbleU,

  If your printer is connected to the network, then you must connect even on computer A to start the Printer Spooler service.

  If the printer is connected to the locally through the USB port, then you need not connect to computer A to start the spooler service of.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer has been recognizing not my two printers. He says that the printer spooler was not working. So I uninstalled my printer and when I tried to reinstall I received a message that the RPC server is unavailable.

  My computer has been recognizing not my two printers (which I have had for years).  The message says that the "spools of printer was not working" when I tried to print.  So I uninstalled my two printers and tried to re - install.
  Then I get a message that the "the RPC server is unavailable".

  Hello Sue Strong,.

  Thank you for your message.  Let's try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.

  Click the (+) sign next to "Services and Applications" > select 'Services '.

  On the right, find and right-click "RPC Remote Procedure Call ()" > select "Properties".

  Select the "Recovery" tab, then successively in first failure, second failure, etc. "restart the Service"

  Validate the change OK
  Stay in the services menu.
  On the right, find and click on "Print Spooler" > select "Properties".
  Click on the 'Start' button and check the "Startup type" is set to "Automatic" and click OK.
  If these steps resolve the problem, click HERE for more information and troubleshooting techniques.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Trying to install Canon MP250 with a Windows XP Professional version 2002 service pack 3 OS.___Receiving several associated messages.___Fix error Printer Spooler app it yourself and Fix for me the MS site options have failed. ___

  My OS is Windows XP Professional version 2002 service pack 3

  Spooler subsystem app has encountered a problem and needs to close.

  Spoolsv.exe - application error
  the instruction at "0 x 00300000" referfenced «0 x 00300000» memory  the memory could not be "read".  Click ok to complete the program, click Cancel to debug the program.

  When I try to manually restart the print spooler, I get the error message:

  script error Internet explorer
  an error has occurred in the script on this page
  line: 1
  Char: 1
  error: unspecified error
  Code: 0
  URL:RES://c:\Windows\System32\mmcndmgr.dll/views.htm

  I tried all the fix it you suggestions on the site of MS (by removing printers, printers spool, drivers, driver files, editing the registry...)  Still the same problem resurfaced.  I even downloaded a registry cleaner to give a shot and no progress.  The only thing that I have not been able to do is, log in Safe Mode, because doing the newspaper in tells me that my password/login is incorrect (also a great mystery)
  I also ran all the fix for me programs offered - no. RESULTS

  I am extremely frustrated, I should share the printer and try another brand.  Who count? Help, please

  Hello Demars_will,

  Thank you for your message.  There are a few known bugs for this problem.  Try these two steps:

  Try first to this step:
  Put your XP CD in the CD drive.
  Click "Start" > click "Run" > Type EXPAND/r 'TheCDDriveLetter' \i386\SPOOLSV. EXE C:\Windows\System32 and press "Enter."
  Click "Start" > click "Run" > type SPOOLSV. EXE/install and press "Enter."

  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click the (+) sign next to Services and Applications, under Select 'Services '.
  On the right, locate and double-click "Print Spooler" > auto value startup > select 'Start' > click 'Apply and OK.

  A test to see if the spooler has begun.

  If this is not the case, click HERE for a registry change that may solve your problem.  There are a few different registry changes, I don't know if you have tried this one or not.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Please let us know if it did or did not help to solve your problem.

  Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• Printer spool error 'local print spooler service is not in the course of execution-restart spooler'

  Coil Sprinter restart

  my computer crashed few, but I lose my software.  I replaced my card m? ire and a neighbor, HE got most of my programs and the work of electronic mail.  I'm having a problem with my printer spool.  The message I get is "local print spooler service is not currently running-restart spooler. And 0 x 80040707 error DLL function call crashed: Braddprt.check local port. "Then, I got an update that does not work for my brothers printer.  Can someone help me?

  Hi Gin99,

  ·         The printer is already installed?

  ·         Or do you have the error during the installation of the printer software?

  Try the following.

  Method 1: Run the next Fixit tool and see if it helps.

  Problems printing and printing errors

  Method 2: Follow the steps in the article mentioned below.

  Printer in Windows problems