Join LWAPP failed
I have,
I try to install an AP 1130 G (converted to LWAPP) to join our brand-new 4402 (3.2.116.21) wireless controller.
The boot of the AP, discover the controller (through DNS), receive an IP from DHCP address and send a join query. After that, we
receive error message and restarts the AP over and over again. If anyone can help me.
* 00:00:26.106 Mar 1: % LWAPP-5-CHANGED: LWAPP changed state of DISCOVERY
Translate "CISCO-LWAPP - CONTROLLER.xx.xx.xx"... the domain server (192.168.41.5) [OK]
* 00:00:34.247 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 192.168.42.250, mask 255.255.255.0, hostname AP0013.8060.73bc
* 00:00:47.605 Mar 1: % LWAPP-5-CHANGED: LWAPP changed State to ADHERE
* 1 Mar 00:00:52.605: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: has not received the answer to join
* 1 Mar 00:00:52.605: LWAPP_CLIENT_ERROR_DEBUG: no more AP manager IP addresses remain.
* 00:00:52.605 Mar 1: % SYS-5-RELOAD: reload LWAPP CUSTOMER the request. Reload reason: NO SE JOIGNIRENT RESPONSE.
* 00:00:52.605 Mar 1: % LWAPP-5-CHANGED: LWAPP changed State to DOWN
If it is an AP upgrade, make sure that you allow only self-signed certificates. Make sure the MAC and the SSC are in the list of approved AP. Not having the right on time the WLC (NTP) may lead one this too.
Tags: Cisco Wireless
Similar Questions
-
When you try to add a new computer Windows Vista (hqseven) to a Windows 2008 network, I get the following error message... "An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Ensure that this client is set to reach a DNS server that can resolve DNS names in the target domain. "Last year, I added two XP, a Windows 7 and another Vista box to the field. I don't know why I can't add my new Windows Vista computer.
I am able to get on the internet with the Vista PC. I can RDP to the domain controller (hqserver64) or any client. (using the name of host or static IP) I can also do a ping of the domain controller (DC) or any another computer on my network using the host name.
After initial search for information, I found the following error message when you do a nslookup from my new vista box.
Nslookup mydomainnameServer: hqserver64.mydomainname.netAddress: 192.168.0.99
hqserver64.mydomainname.NET cannot find mydomainname: Server failed.
I do not understand why I suddenly get these error messages when I was able to reach this area in the past.
Hello Stan Smith,
Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows 7 in adomain of work environment and would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Hope this helps J
Adam
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Problem to join a domain with Windows Vista Bussiness
I have my domian with Windows Server 2008 standard, on my network, I have Windows XP, 2000, Win7 and Vista computers and laptops.
I have no problem to join all computers, but when I try to join a computer or laptop with Vista it keeps giving me this error:
"An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Please check that this client is set to reach a DNS server that can resolve DNS names in the target area.
I already do a little research on the web and try disabling IPv6, I also create the computer in the ad before attempting to join the domain, so far without success.
Thanks in advance for your answers!
Hi Arturo,.
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.
-
I played with workstation 10 for about a day now.
I'm pretty green when it comes to the DNS configuration. The reason for it, for the experience.
I created a Virtual Server R2 of 2012 and a VM 7 Win machine. I'm trying to join the VM 7 Win the field laboratory.
I've already promoted the server to be a domain controller.The error I get is:
An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Please check that this client is set to reach a DNS server that can resolve DNS names in the target domain.
Not sure what is the cause.
In the IPV4 properties, I changed the DNS server to use the IP address of the domain controller that I read but still no luck.
Also how can I set up the network for the VM?
Thank you
Jason
Come on come on client machine Winodows 7 > network and sharing Center > adapter set it > right click Local area connection and click Properties
Double-click PTC/IPv4
In the preferred DNS server, type the IP Address of the domain controller and see if that helps the problem.
Also check if the firewall is blocking communication. Disable the firewall and check.
-
show on a monthly basis, using the outer join
Hello
I use an example of emp table to describe my problem here
I made a request that is group by hiredate months and showing the sum of wages.
as follows,
Select
TO_DATE (to_char(HireDate,'MON-RRRR'), MON-RRRR), sum (sal)
Of
EMP
Group by
TO_DATE (to_char(HireDate,'MON-RRRR'), MON-RRRR)
SQL > /.
TO_DATE (T SUM (SAL)
--------- ----------
FEBRUARY 1ST, 10 21000
MARCH 1, 10 30000
MAY 1, 10 43000
1ST JUNE 10 70000
what I want is to show also the months too where any recruitment made
as
month sum (sal)
January 1 10 0
FEBRUARY 1ST, 10 21000
MARCH 1, 10 30000
April 1, 10 0
MAY 1, 10 43000
1st June 10 0
1ST JUNE 10 70000
August 1 10 0
0 01-sept.-10
1 October 10 0
1 November 10 0
1 December 10 0
I've tried doing another table with month AND use outer join, but failed to get the result
any ideas will be appreciatedChange the following query accordingly as directed by your data
Select
ADD_MONTHS (to_date (January 1, 2001 "," dd-MON-RRRR'), level - 1) MonthName
Of
Double
connect by level<=>=>It gives data for 2001
If your emp table is to have 2010 data while it was being replaced by add_months (to_date (January 1, 2010 "," dd-MON-RRRR'), level - 1) MonthNameAlexander gelin
http://nimishgarg.blogspot.comEdited by: Caroline Geffroy 10 June 2010 18:11
-
I had two Tables.APPROVAL_ROUTING_TAB and doc_issue_tab, where APPROVAL_ROUTING_TAB has more lines. I need to make a join of two tables such as all APPROVAL_ROUTING_TAB lines should be displayed (multiple lines) but always connect with the doc_issue_tab. I did an outer join syntax failed.
What is the correct syntax for this.
Key_ref takes the outline "DOC_CLASS = PR_CLASS_1 ^ DOC_NO = 1000007 ^ DOC_REV = A3 ^ DOC_SHEET = 1 ^ '.
SELECT
AR.line_no LINE_NO,
AR.step_no STEP_NO,
AR.lu_name LU_NAME,
AR.key_ref KEY_REF,
AR. Description DESCRIPTION,
di. Status STATUS
From ar APPROVAL_ROUTING_TAB, doc_issue_tab di
WHERE
AR.key_ref = 'DOC_CLASS =' | di. DOC_CLASS |' ^ DOC_NO =' | di.doc_no: ' ^ DOC_REV =' | di.doc_rev: ' ^ DOC_SHEET =' | di.doc_sheet: ' ^') (+)
Thanks in advance
PrashHere is an example:
with t1 as (select 1 id, 'd1=fred^d2=john^d3=bob^' col2 from dual union all select 1 id, 'd1=fred^d2=john^d3=george' col2 from dual), t2 as (select 'fred' d1, 'john' d2, 'bob' d3 from dual union all select 'jim' d1, 'john' d2, 'bob' d3 from dual) select * from t1, t2 where t1.col2 = 'd1='||d1(+)||'^d2='||d2(+)||'^d3='||d3(+)||'^'; ID COL2 D1 D2 D3 ---------- ------------------------- ---- ---- --- 1 d1=fred^d2=john^d3=bob^ fred john bob 1 d1=fred^d2=john^d3=george
-
Cisco WLC 2504 - Access Points do not reach the controller
Hello world
We bougth a Cisco WLC 2504 with two AIR-AP2702I-UXK9 Access Points. The problem is that the AP do not join the WLC.
The output from 'show join ap stats' shows the following:(Cisco Controller) > view join ap stats summary all the
Database Mac EthernetMac AP AP name IP address Status
00:35: 1a: B1:A9:60 00:f2:8 b: f4:1 has: 9 c AP00f2.8bf4.1a9c 192.168.10.23 joined not
00:35: 1a: C9:99:B0 00:f2:8 b: 77:b7:fc AP00f2.8b77.b7fc not joined 192.168.10.24(Cisco Controller) > show join ap 00:35:1 detailed stats to: b1:a9:60
Synchronization phase statistics
-For the synchronization request has received... Does not apply
-For the synchronization completed... Does not applyDiscovery phase statistics
-Applications received discovered... 114
-Answers success of discovery... 114
-Discovery failure processing... 0
-Purpose of the last unsuccessful attempt of discovery... Does not apply
-Attempt to finally successful discovery time... 20:15:40.106 16 June
-Discovery attempt ultimately unsuccessful time... Does not applyJoin the live statistics
-Join applications received... 57
-Join sent successful responses... 57
-Processing of the join request without success... 0
-Purpose of the last unsuccessful attempt to join... Does not apply
-Attempt to join finally managed time... 20:15:50.414 16 June
-Join finally failed time... Does not applyConfiguration phase statistics
-Configuration requests... 114
-Answers configuration successful... 0
-Processing configuration failed... 57
-Purpose of the last unsuccessful attempt to Setup... Invalid license in the application configuration
-Attempt to finally successful configuration time... Does not apply
-Time finally failed configuration attempt... 20:15:50.810 16 JuneLast the decryption of the AP details failure messages
-Last message decryption failure reason... Does not applyDetails of recent disconnection AP
-Last AP connection failure reason... Does not apply
-Last reason for disconnection AP... Unknown failure reasonLatest summary join error
-Type of error that occurred in the last... Application of configuration rejected LWAPP
-Reason for the error that took place the last... Invalid license in the application configuration
-Time which occurred the last error to join... 20:15:50.810 16 JuneDetails of sign-out AP
-Last AP connection failure reason... Does not apply
Ethernet Mac: c 00:f2:8 b: f4:1 has: 9 Ip address: 192.168.10.23Would be grateful for the help.
Best regards
MarcHi Marc,
Make sure first that your controller has software code 8.0.x or above, if first better it. Here's the code recommended by TAC
Then, try the UX above deployment guide to begin. Under Advanced tab WLAN, you need to enable "of the first universal ap' in order to use this app provisioning & connect to the AP.
If you have more than 1 AP, then you must start 1AP using this application. Other access points that you can feed them upward, while AP original is also powered, so they'll use protocal called NDP & start them automatically
Let us know how it goes
HTH
Rasika
Pls note all useful responses *.
-
Amount of access points allowed on a 4402 (50 PA)?
We habe a WLC 4402 race (SW Version 6.0.196.0) which is supposed to support access 50 points.
It is a solution of WLAN of comments with 2 Wireless LANs that are tunneled through the FW to a WLC anchor that leads to the internet and 1 WLAN which is directly lead to the corporate network.
For the moment, I have attached... access 47 points and my problem is, I can't tie up more than that.
I tried to take one of the 47 offline and then I could attached a new. But the limit seems to be 47.
What can be the reason why 3 AP licenses are taken?
Here is the log of the AP, which tries to connect:
* 09:38:15.711 Mar 23: % 3-CAPWAP-ERRORLOG: go join a capwap controller
* 09:38:15.000 Mar 23: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.1.132.193 peer_port: 5246
* 09:38:15.001 Mar 23: % CAPWAP-5-CHANGED: CAPWAP changed State to
* 09:38:16.406 Mar 23: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 10.1.132.193 peer_port: 5246
* 09:38:16.408 Mar 23: % CAPWAP-5-SENDJOIN: send request to join 10.1.132.193
* 09:38:16.408 Mar 23: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE
* 09:38:16.414 Mar 23: % DTLS-5-ALERT: WARNING received: close notify alert from 10.1.132.193
* 23 Mar 09:38:16.414: % PEER_DISCONNECT-5-DTLS: Peer 10.1.132.193 has closed the connection.
* 09:38:16.414 Mar 23: % DTLS-5-SEND_ALERT: send WARNING: close notify alert at 10.1.132.193:5246
* 09:38:16.685 Mar 23: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 09:38:16.686 Mar 23: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 09:38:16.700 Mar 23: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
* 09:38:16.700 Mar 23: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively
* 09:38:16.714 Mar 23: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to
* 09:38:16.714 Mar 23: % LINK-3-UPDOWN: Interface Dot11Radio1, changed State to
* 09:38:16.716 Mar 23: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 09:38:16.745 Mar 23: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to
* 09:38:16.746 Mar 23: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset
* 09:38:26.713 Mar 23: % 3-CAPWAP-ERRORLOG: go join a capwap controllerHere is the log of the WLC:
* 23 10:55:18.314 Mar: 00: 3A: 98:1 c: 50:60 join RESP: failed to encode the IPV4 of CAPWAP control address
* 23 10:55:18.314 Mar: 00: 3A: 98:1 c: 50:60 failed code the response to 10.3.8.240:64388 join
* 23 10:55:18.316 Mar: 00: 3A: 98:1 c: 50:60 Config response failure: failed to send response to join to 10.3.8.240:64388
* 23 10:55:18.317 Mar: 00: 3A: 98:1 c: State 50:60 machine Manager: failed to process the msg = 3 State = 0 10.3.8.240:64388 type
* 23 10:55:18.317 Mar: 00: 3A: 98:1 c: 50:60 impossible to analyze packets 10.3.8.240:64388 CAPWAP
(* 23 10:55:18.320 Mar: 00: 3A: 98:1 c: 50:60 throw no - ClientHello Handshake or DTLS encrypted package to 10.3.8.240:64388) since DTLS session is not established
* 23 10:55:18.399 Mar: 00: 3A: 98:1 c: 50:60 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 50, joined Aps = 47Hello
Here is the bug, I guess that we are hitting... If please run the workaround and let me know if it works...
Let me know if this answers your question!
Concerning
Surendra
-
Firefox fail to join the doc in e-mail indicating that it might be due to proxy or firewall and to ask for the classic Loader help
This problem was earlier not existing does not
This isn't the problem with internet exploreI have already updated to version 9.0.1 and I can't yet nothing attached to an e-mail. I did have this problem with a previous version of Firefox. What did you do to the system? It's very annoying.
-
I have two computers in a small home network, both running Windows 7. A laptop and the other a PC. The two appear in the network on each computer. The PC shows it belongs to a homegroup, but when I try and join the laptop to the Homegroup PC, following the instructions, including the seizure of the password, it fails. I want to share photos, files and documents, etc.
Any ideas.
Original title: homegroups
Read this discussion and see if it helps you:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/HomeGroup-cannot-figure-out-how-to-share-files/f2ee4a6b-1540-4894-8a80-15168e55fc83>Here is another method that doesn't use homegroup. I've used this between two machines of Win7 and between Win7 and Win8 machine, as well as the topic Win7 and WinXP. I am frustrated with Group residential everything and currently have disabled entirely.
http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/>SC Tom
-
Good afternoon, to join the plan VIP but fails with this message: the invitation code is not validDid you check with your plan administrator?
-
6.0.0 - 3634788 VCSA Installer fails on workstations joined to a domain
I have Windows 7 and Windows 10 workstations as part of an AD domain.
I install the VMware-ClientIntegrationPlugin - 6.0.0.exe to the ISO VCSA very well (ensuring that this hosts.bak was not present before the installer.)
The customer integration Plugin inserts the following two lines in the hosts file:
127.0.0.1 localhost vmware
: 1 localhost vmware
I'm going to install the VCSA using any browser (IE, Chrome, and Firefox all have exactly the same problem) and I see this window first (this used to be a "external Protocol;) (Ask'):
Can I specify the host, domain SSO, etc., and the installation program fails to step 6 with 'error in the extraction of profile data.
I can install the VCSA to workstations that are not joined to the domain and workstations that are attached to other areas.
Any ideas?
I have it! It was the Horizon view Agent 7.0.0.3634043 ' blocking ' Installation VCSA to step 6!
When I removed the Horizon view Agent and RDP'ed on the workstation from another machine, the VCSA Installer worked as expected.
It makes perfect sense too, as agent of the view of the Horizon is the only thing that has been upgraded all Windows 7 and Windows 10 jobs since the last installation of the vCenter Server Appliance
-
See 5.3 and 8.1 of Windows domain join fails
Hi all
I just upgraded view server and view composer 5.2 to 5.3 connections. Always running vSphere/vCenter 5.0, but these are listed as supported in the support matrix.
My related stocks work fine (XP and Windows 7). I tried to add a new Pool of Windows with the last Agent of view 8.1 installed on it but get "view composer agent error initialization state (18) could not join the domain. The irony is that he actually join to the domain, but the State of the virtual machine to get in an error state, so it cannot be used.
Here's my log of the agent
VMware-viewcomposer-ga - new.log
2013-12-12 11:11:45, 563 [1336] INFO VolumesReady - [VolumesReady.cpp, 115] launch of the script to join the domain: C:\Program Files (x 86) \Common Files\VMware\View composer invited Agent\vmware-svi - ga.exe /JoinDomain
2013-12-12 11:11:45, 563 [1336] DEBUG Wow64FsRedirectionOff - [Wow64FsRedirectionOff.cpp, 109] redirection disabled with success of WOW FS.
2013-12-12 11:11:45, 751 [2180] INFO CSvmGaService - [svmGaService.cpp, 87] Initializing Service
2013-12-12 11:11:45, 766 [2180] INFO CustomizationPersistentInfoReg - [CustomizationPersistentInfoReg.cpp, 98] registry key open comments to access personalization information.
2013-12-12 11:11:45, 766 [2180] DEBUG SvmDisk - [SvmDisk.cpp, 55] found signature file //?/Volume{c7751884-6347-11e3-8259-806e6f6e6963}/simvol.dat to the volume mount point with \\?\Volume{c7751884-6347-11e3-8259-806e6f6e6963}\ * and use 001
2013-12-12 11:11:45, 766 [2180] INFO CSvmGaService - [svmGaService.cpp, 214] policy found on the volume file: \\?\Volume{c7751884-6347-11e3-8259-806e6f6e6963}\
2013-12-12 11:11:46, 876 [2180] INFO CSvmGaService - [svmGaService.cpp, 305] analyzed the signatures of disk and the policy successfully
2013-12-12 11:11:46, 876 [2180] DEBUG CSvmGaService - [svmGaService.cpp, 131] domain Joining
2013-12-12 11:11:46, 876 [2180] INFO Guest - [Guest.cpp, 272] trying to reach Station1 to the contoso.com domain
2013-12-12 11:11:47, 719 [2180] FATAL Guest - [Guest.cpp, 285] domain join failed: 2
2013-12-12 11:11:47, 829 [2180] FATAL CSvmGaService - [svmGaService.cpp, 134] Domain join failedError 2 (0x2): the system cannot find the specified file.
Any thoughts?
Hi everyone again once
I opened a ticket with VMware support, and to my surprise, the recommendation has changed for the construction of parent vm for the linked clones. Now VMware recommends for Windows 8 parent VM, that they are not joined to the domain. (they should be only machines of the Working Group). I hope this helps someone.
-
After response failure attaching pictures to the email received, l had opening of 'problem'... "" try again "screen but now cannot open new screen msg at all for the new message or a reply.
Hope I'm doing this right - tried restar, apparently seeking the answers and by publishing this request elsewhere. Appreciatte guidance!Hi Mike,.
You are welcome. If you have any other questions, you can always report to Microsoft Answers.
-
Join TMS MCU fails with "no ip bandwidth...". »
We are trying to install a telepresence VTC system. We are trying to register the MCU (5320) (4.5) for TMS (14.6). We use a virtual VCS as the doorman. When attempting to add the TMS MCU, we get a warning "no bandwidth set to the system - system has bandwidth IP or ISDN bandwidth..." MSD displays zeros (0) for Ports and bandwidth. We have defined the bandwidth of the MCU on parameters of the H.323 MCU. There must be some little thing that we have not been configured correctly. We rechecked SNMP parameters, parameters H.323, etc. anything.
Someone at - it have this problem before?
TIA,
Mark
Areas are used in routing when creating the Conference schedules. You can assign areas after adding points of termination or infrastructure in TMS, or while you are being added to them. You can read more about which areas are in the TMS administration Guide, starting on pg 46.
Regarding your MCU, if you are devoid of multimedia ports, it is probably the root cause of the problem. Cisco have added to them, you'd only you you receive the product similar to how you added the activation keys and encryption. If you go to the Cisco Licensing Portal, navigate to obtain other licenses > license of telepresence to return, then enter the serial number of the MCU. It returns all the keys related to this MCU option if media ports were purchased, they should appear on the screen. You are looking for something that says "L-5300-4PL.
Maybe you are looking for
-
(How) Can I re-download iMovie 9 (in addition to iMovie 10)?
I've updated to capita and iMovie 10.1.2 El. After using is no iMovie for a long time. Now, when you want to update iMovie projects and events in the program can not find them. Could I eventually go back to iMovie 9, possibly more install iMovie 10?
-
What do you most need?
-
I continue to receive messages at the bottom of the screen "Loaca network connection is now connected" and local Area Connectiom - a cable is unplugged' passemodificationConnexionmodification. Can't go around them
-
Explorer.exe partially stops working
Hello A weird one. Brand new Lenovo T530 running Windows 7 Professional 64 bit. Machine starts and runs Ok, then go a little strange after "awhile", could be 5 or 10 minutes or hours, just using normal applications of Office 2010 or Office 2013, Win
-
BlackBerry smartphone APP world will not register
Tried to download some applications. I have always access the authentication ID BB... page and getting stuck there. The massage I get is "enter the name account a partner to this smartphone ' which can be translated approximately 'enter the id of the