Explorer.exe partially stops working

Similar Questions

• Whenever I open my computer I get this message: "explorer.exe has stopped working".

  original title: explorer.exe has stopped working

  whenever I try to open my computer it tells me that windows Explorer has stopped working, everything else works but when I go into safe mode it let me go in my computer and I checked for viruses and there is no someone help me, please to fix this i dnt want to start over and lose everything. hope to hear something back as soon as possible. Thank you and have a nice day.

  Hello

  The computer works fine in safe mode, I suggest you perform a clean boot in order to check whether a third-party program or service that runs in the background is the origin of the problem.

  Refer to this article for help:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  
  Note: please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Explorer.exe has stopped working

  Original title: explorer.exe

  My explorer.exe has stopped working several times and I tried to start in the Task Manager, but he tells me that he has ceased to work every time

  Often, a certain instability in Windows Explorer is due to the defective shell extensions and addons.

  Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.

  Try a clean boot, or boot into safe mode.  The behavior persists?

  If you continue to experience the problem, consider creating the hierarchy of following registry keys in the registry:

  HKLM\Software\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe\

  In the explorer.exe key, create a REG_EXPAND_SZ value named DumpFolder and set the value to%systemdrive%\localdumpsdata.  Ensure that the %systemdrive%\localdumps file exists, and then cause the crash to happen.  It must be a dump file in %systemdrive%\localdumps. Download the dump on your SkyDrive file and provide a link.

  (Letter is an environment variable that represents the system drive, usually C:.)

• Windows 7 64 bit Ultimate - Explorer.exe has stopped working (AppCrash)

  It happens when I open the readers (problem happened in 2 of the readers). Windows exporer just stop working and restarting Explorer, but nothing worked I looked out in the net for the solution. the window displays:

  Problem event name: APPCRASH

  Application name: Explorer.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bc60d

  Fault Module name: ArcSpl.ax

  Fault Module Version: 2.4.2.45

  Timestamp of Module error: 448f57ee

  Exception code: c0000005

  Exception offset: 0000c28a

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: a7aa

  More information 2: a7aa91f17ea749d42a4de3b390fa5b3d

  More information 3:a7aa

  More information 4:a7aa91f17ea749d42a4de3b390fa5b3d

  Please, give suggestions so that I can fix my PC.

  Error to ArcSpl.ax as the failed Module points.  This module belongs to the ArcSoft MPEG splitter program.  The module goes back to Wed Jun 14 00:27:26 2006 and is probably not compatible with Win7.
  Please uninstall the ArcSoft program and see if that stops at the AppCrashes.

• Explorer.exe has stopped responding during the slide show.

  I am not sure what happened, but I was downloading of images for a slideshow and I didn't notice that my laptop has been restarted due to an update. I thought it would be to find until I started to run into an error with explorer.exe. When I go in the folder of the situation to show them as a slideshow of the pictures, the screen goes black, as it is supposed to and then crashes. From there on, I get a notification that explorer.exe has stopped working. Do you think the problem is a corrupted image file should I remove? It doesn't bother me if I have to because I know where to find them again.

  Hi WyldFyre254,

  I would suggest trying the following steps and check if it helps.

  Step 1: Start the computer in safe mode and check if the problem persists.

  Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly or may prevent Windows from starting correctly.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Step 2: Recreate the slideshow and check that it works very well.

• WRT400N setup.exe has stopped working

  I just got a HP Pavillion desktop computer new with Vista 64 and I have problems installing. Whenever I put the installation disc in the drive it does not load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried to jump the autorun and will my CD-ROM drive and manually select the file setup.exe. The initial splash screen appears and says please wait loading but I never have any more than that because the program crashes. I thought that maybe the drive was defective, but I tried it on a XP desktop and an XP netbook and the disk works fine on both. What gives? I searched this whole Forum and it seems I am the only person with this problem. My new defective computer or is it the user

  OK, so I finally understand for me. I did an exploring more of the disc and found a file named setup64.exe and TADAAAAA this file runs. But I still can't LELA to run but hey at least I have everything works now

• Windows Aero partially stops working

  I had a recurring problem with my Windows Vista Home Premium where Windows Aero partially stops working. Some of my open windows lose the glass effect, and some of my tabs look effect. As far as I know, the 3D Flip feature still works in these situations. I wonder what I can do to avoid Aero lose parts of its features... the behavior is strange to me, since I would expect Aero is working completely or not at all, but this isn't the case. In general, I noticed this behavior so that I have more than a single open window and either close an app full screen or return to windowed mode. I read that a sfc/scannow might help restore the Aero feature if it has stopped and I am currently in the running process, but I would avoid the problem altogether, so that must not be repeated in the future (assuming it works).

  If it makes any difference, I have a 1 GB Nvidia GeForce 9800GT.

  Hello

  There may be some sort of corruption or a driver problem. I see you already use however SFC
  I'll leave it in the resolution of problems in case others have the same or similar problem.

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==============================================================

  2. after the update that precedes your video/display readers.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error: "Setup.exe has stopped working".

  Trying to open a downloaded file that updates a driver Lexmark (Z600), the process ends quickly with the dialog box stating that "Setup.exe has stopped working. Windows Explorer needs to close".

  You can try a right-click on the setup.exe > run as admin.

  Or repost in the following Forum:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question Driver Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Explorer Windows 7 stop working and restarts

  Hi, Win 7 Explorer systematically will stop working if I Rt click on one of my drives and select [Properties].  I put in a boot environment and there is the same problem. News from the event viewer are as follows:

  The failing application name: Explorer.EXE, version: 6.1.7601.19135, time stamp: 0x56a1bbe2

  Name of the failed module: SHLWAPI.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c9ab

  Exception code: 0xc0000005

  Offset: 0x000000000000ae72

  ID of the process failed: 0xe98

  Start time of application vulnerabilities: 0x01d17737117cf4a3

  The failing application path: C:\Windows\Explorer.EXE

  Path of the failing module: C:\Windows\system32\SHLWAPI.dll

  Report ID: f8005a32-e32a-11e5-b3f1-5404a62b1ba9

  The problem occurred only while working in Win 7 Explorer window and the event seems to point to SHLWAPI.dll. All drivers are up to date, as well as all windows updates.  Do you have any suggestions?

  How to do a repair installation to repair Windows 7

  This will show you how to do a repair installation (aka: install upgrade on-site) for fix your currently installed Windows 7 and preserve your user accounts, data, programs and drivers of the system.
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  No-reformatting of Win7, non-destructive reinstall
  http://WindowsSecrets.com/top-story/WIN7S-no-reformat-nondestructive-reinstall/

  ================================================================

  Need to install a Windows 7 Installation DVD to repair

  February 6, 2015, Digital River links for different versions of Windows 7 are functioning is no longer, as an alternative (as long as you have your product key) you can use the link to the Microsoft recovery software web page: http://www.microsoft.com/en-us/software-recovery

  Note: You may receive a notice to connect with the manufacturing of PC if you have a key OEM supplied with your computer, but it can't hurt to try. Also note that this site may return an incorrect language for the product key that you entered. Please read the articles in this wiki below are a possible solution.

  More information and alternative resources:
   
   
  If you have a friend with a version of "Retail" (Full or upgrade media, only in the media that you don't need their key) of the installation DVD (should be the same as your key was for: Home Premium, professional or Ultimate) it will work with your "Retail" or "OEM" product key, if you need to reinstall or repair Windows.

  Read the following articles on the Wiki:
   
  Create your own ISO file from a Windows 7 installation DVD:
   
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/create-your-own-ISO-file-from-a-Windows-7/a344df19-b535-4420-a58f-4898ac7416ec

  How to create a Windows 7 universal installation DVD or a USB Flash drive:
   
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-create-a-universal-Windows-7-installation/15183b74-4478-4647-84dd-6d6431f1cfa4

  How to get Windows 7 spare filter
   
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-obtain-Windows-7-replacement-media/f749fc0e-8bc7-40ba-8d8e-38572cbe6669

  J W Stuart: http://www.pagestart.com

• sqldeveloper64W.exe has stopped working

  Summary of the problem

  ---------------------------------------------------

  Error message: sqldeveloper64W.exe has stopped working when you try to open the .sql files

  Description of the problem

  ---------------------------------------------------

  Breast of SQL Developer 4.0, I went into Preferences > File Types, find the extension .sql and checked the box that says Open with SQL Developer.  I went to the Associations the value Control Panel in Windows 7 Professional 64 bit and confirmed that the current default is set to sqldeveloper64W.  I have used the CMD function for access to regedit, deleted the file associations for .sql and return all preferences.  If the SQL Developer is not already open on my machine and I am trying to open a .sql file, the application starts very well.  If I try to open additional files in the windows or windows Search Explorer, I get an APPCRASH indicating that sqldeveloper64W.exe has stopped working.  I click close the program and developer sql remains open, but my file does not open.

  Error codes

  ---------------------------------------------------

  sqldeveloper64W.exe has stopped working

  Try changing the sqldeveloper64.exe shortcut instead. This will give you the CMD window when it is opened. We'll see if we get interest error messages here when you try to open additional files.

  Once you run SQL Developer time away - force look for a 64-bit JDK, you can simply run the main sqldeveloper.exe in the main folder...

• sqldeveloper.exe has stopped working

  I get this message that says "sqldeveloper.exe has stopped working" when I double click on a file .sql using windows Explorer 7. My sqldeveloper application is already running and remains in place and connected to the database server. My two options on this line are 'close program' and 'check online for a solution. " I chose "close the program", but the program does not close. 'find a solution online' does nothing. There is no associated icon .sql files displaying in Explorer. Should there be?
  If I use sqldeveloper to navigate to a .sql it will open it. He can't open the .sql files. But I also have to work when you search for files by using windows Explorer.
  Anyone have this problem? If so, how to solve it?

  You drag the older plants? I don't normally open windows files, but I did the other day and he starts SQL Developer 1.5. I used 2.1 and then several pre-releases from 3 up to production given that I used last 1.5. It seems that associations not updated files.

  Maybe you have an old facility, non-working, which is giving you the problem.

• "Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

  When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.

  There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.

• HPSF.exe has stopped working

  When I try to open HP Support Assistant, I get an error message that hpsf.exe has stopped working. Application has encountered a problem and needs to close. My warranty expired on 12/09/2012. HP Support Assistant disappears when the warranty expires. If this isn't what someone has an idea how I can fix?

  Hello

  It's nothing to do with your warranty ending, however this can be a fickle piece of software.

  Try the following.

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the computer.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• TosIPCSrv.exe has stopped working on Satellite A300

  When I start my computer... (Vista) I have Toshiba Satellite A300
  I get a warning said: TosIPCSrv.exe has stopped working

  What it means? How should I do?

  Hello

  Seems the TosIPCSrv.exe belongs to the Toshiba S.M.A.R.T. Log Service.
  This can be found in:

  C:\Program files\toshiba\smartlogservice\tosipcsrv.exe.

  I'm not very well what is this process, but you could it enable or disable it in m
  MSCONFIG (type this in the window RUN) and check the startup and Services tabs.
  You need to find tosipcsrv.exe

• Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

  I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

  When I try to install the update, I get a window that says Setup.exe does not work.

  Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

  I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

  Appreciate advice on how to solve this problem.

  Hello

  I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

  I agree with the previous user, and I recommend to reinstall this software again.
  You may need to clean the OS before installing the Truesuite again.
  In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

  Google and you should find more information.

  See you soon
  Jayjay