Join the 2 pictures together etc.
Hi, I have a few questions about Photoshop CS and hope that someone can help me please
First of all, I opened a picture, and somehow it went well in the upper left of the screen and minute. It is 6 x 4 inches, but generally all our images open in the center of the window. How can I change this? I have inadvertently changed something and do not know what.
Second, I have 2 images and I would like to join them, so we're sitting under the other. How can I do this please?
Thanks in advance for your answers
This link, you should get by joining photos. http://forums.Adobe.com/thread/558038?TSTART=0
You say that the image is minute but is 6 x 4. Is this really what says the size of the Image? What is - this in pixels?
Tags: Photoshop
Similar Questions
-
Join the Parent picture to the domain before you create linked clones?
Do we not have to attach the image relative to the domain before creating a snapshot, and use it to float pools related clones?
Agree with Mittim12... Works either way, but we have our images of parent is joined to the domain before. This help us to do things that is install OK on the image for domain use for users and allows us to do some more test before we deployment.
Good luck...
-
I moved the documents, pictures, music etc all of drive D and removed all of the excess programs. Despite this C is always showing almost complete. How to see the content?
I moved the documents, pictures, music etc all of drive D and removed all of the excess programs. Despite this C is always showing almost complete. How to see the content?
Buna,
See if this little program will help you to tell you what is causing this lack of space for you problem
http://www.Jam-software.com/treesize_free/
Revedere.
-
Original title: Photo
How can I put two pictures together so that I could make a poster, including the two photos?
Hello
What operating system do you use?
You can do this by using paint or Windows Photo Gallery or Windows live photo gallery. See the following articles that might help you.
With the help of paint
http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint
With the help of paint
http://Windows.Microsoft.com/en-us/Windows7/using-paint
Overview of Microsoft Paint
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/mspaint_overview.mspx?mfr=true
Open Windows Photo Gallery
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Windows-Photo-Gallery
Windows Live Photo Gallery
http://Windows.Microsoft.com/en-us/Windows7/products/features/photo-gallery -
I recently had a new hard drive installed; now when I open my pictures folder and display their (in any view-film, thumbnails etc.) photos have a 'white' on the region, and I don't see the whole picture.
Hi AnnEdelstein,To resolve this problem, install the latest version of the video card driver.Contact your video hardware manufacturer to find out how to obtain and install the latest version of the video driver for your video device.To see if applicable driver updates are available, visit the Microsoft Windows Update Web site at the following address:More information on:
How to manage devices in Windows XP
Keep me updated on the status of the issue.
-
Hello, I want to click on a point on the map where I have several pictures. I want the selected photos will be displayed ~ set ~ view film or the library.
I took pictures in the same place in different years. But I don't see this side of the other. I expected that it works as a filter and show only pictures of the location of the selected card. Am I missing something? What I really need to scroll beyond all images that are not of this place to get to the next picture?
Thank you!
Solved, sort of.
You will need to zoom in on the map so that the point of interest. Then click in the gray bar of 'Location filter' at the top 'Visible on the map. This will show the photos associated with that point. In other words, you can't just click on a point to see all her pictures.
Hope this helps someone.
-
Join the ACS 5.4 AD strange question
Hello
We have two ACS boxes with the same version of software (5.4.0.46.0a), we have been able to join the domain a that only ACS and other ACS are given the error attached.
When we checked "main-acs-01 / admin # acs troubleshooting adcheck
, he gave the same error for the two candidate countries, however an ACS successfully joined the domain and still others we failed." principal-acs-01 / admin # acs troubleshooting adcheck<>
This command is only for advanced troubleshooting and could suffer a lot of network traffic
Do you want to continue? (yes/no) Yes
OSCHK: Check that it is operating system: pass
PATCH: Patch Linux check: pass
PERL: Check that perl is present and is a good version: pass
SAMBA: Inspection of the installation of Samba: pass
SPACECHK: Check if there is enough space in/var/usr/tmp: pass
HOSTNAME: Check the hostname parameter: pass
NSHOSTS: Check the hosts line in /etc/nsswitch.conf: pass
DNSPROBE: Probe Server DNS 172.24.1.1: pass
DNSPROBE: Probe Server DNS 172.24.1.2: pass
DNSCHECK: Analyze the health of DNS servers database: pass
WHATSSH: Is it a SSH DirectControl works perfectly with: pass
SSH: SSHD version and configuration: Note
: You are running OpenSSH_5.3p1, CiscoSSL 0.9.8r.1.3.
DOMNAME: Check that the domain name is reasonable: pass
ADDC: Search for domain controllers in the DNS: pass
ADDNS: Search DNS DC xxxx.
: Pass ADPORT: Scan of Port DC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass ADPORT: Scan of Port DC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Failed : Could not resolve the IP address of xxxx.hmc.org.qa.
ADDNS: Search DNS DC xxxx.
: Pass ADPORT: Scan of Port DC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass ADPORT: Scan of Port DC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass ADPORT: Scan of Port DC xxxx.
: Warning : One or several ports did not respond correctly. Either:
(: a) the domain controller is offline
(: b) a firewall prevents access to a port
: The following is a list of ports has failed:
: ldap 389/udp - timeout
: 445/tcp smb - denied
: ldap 389/tcp - denied
ADDNS: Search DNS DC xxxx.
: Pass ADPORT: Scan of Port DC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass ADPORT: Scan of Port DC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass ADPORT: Scan of Port DC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass ADPORT: Scan of Port DC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass GCPORT: Port scan of GC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass GCPORT: Port scan of GC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Failed : Could not resolve the IP address of airportdc1.
. ADDNS: Search DNS DC xxxx.
: Pass GCPORT: Port scan of GC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass GCPORT: Port scan of GC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass GCPORT: Port scan of GC xxxx.
: WARNING : One or several ports did not respond correctly. Either:
(: a) the GC is offline now
(: b) a firewall prevents access to a port
: The following is a list of ports has failed:
: gc 3268/tcp - denied
ADDNS: Search DNS DC xxxx.
: Pass GCPORT: Port scan of GC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass GCPORT: Port scan of GC xxxx.
: Pass ADDNS: Search DNS DC xxxx.
: Pass GCPORT: Scan of Port GC xxxx
: pass ADDNS: Search DNS DC xxxx.
: Pass GCPORT: Port scan of GC xxxx.
: Pass ADGC: Check Global catalog servers: spend
DCUP: Search for operational controllers
: pass SITEUP: Check DCs for
in our site: go DNSSYM: Check the symmetry of DNS server: pass
ADSITE: Verify that the subnet of this machine is in a site known as AD: pass
GSITE: See if we think it is the correct site: pass
TIME: Synchronization of clocks Check: pass
2 serious issues have been encountered during the audit. These must be fixed before proceeding
2 warnings were encountered during the audit. We recommend that you check these before proceeding
principal-acs-01 / admin #.
The one facing this problem before and grateful if someone can tell how to solve this problem.
It is a known issue with ACS 5.3 However, we had this problem in ACS 5.3 patch 7 and 5.4 of the ACS
Since you're under 5.4 ACS, it should not trigger.
CSCtx53223 After update 5.3 ACS fail to join the domain AD - lack of license Centrify
Symptom:
After the upgrade from 5.2 to 5.3, ACS is unable to join the domain. AD connection worked for several days, until the services have been restarted. After this, ACS is unable to join AD with the following in ACSADAgent.log error message:
Jan 20 02:36:32 CBR1BACS01 Bordes [6814]: DEBUGGING cli.adjoin Join to area is permitted only with a licensed copy of DirectControl. Obtain a license or learn more about Centrify following http://www.centrify.com/express
Jan 20 02:36:32 CBR1BACS01 Bordes [6814]: DEBUGGING cli.adjoin without a permit, you can connect to a domain via Auto Zone by specifying Bordes w Test.Test
Conditions:
Move from 5.2 to 5.3. Restart the services thereafter.
Workaround solution:
Save the ACS db and recreate the picture on the box to 5.3
How upgrade to 5.4 ACS
1.] updated to 5.3 to 5.4 using the upgrade package.
2.] reianged with ACS 5.4 ISO and restored the database ACS 5.3.
I suggest you to prosecute on this TAC. [Most likely you must reimage the server and restore the database if you had crossed with option 1.]
~ BR
Jatin kone* Does the rate of useful messages *.
-
I joined the cloud, but couldn't see any of the new bells and whistles in photoshop CS6
I joined the cloud today and looks forward to the new features in photoshop. I currently own CS6 stand-alone. I opened a picture and no new options (sharpening points, bridge as a filter, etc.) were there. I clicked update on the photoshop CS6 app when I downloaded a few applications. What should I do to get a version of CS6 which has all the advancements?
Culver99, it's because of your license of CS6 continued to be applied to your copy of Photoshop. For future viewers of this thread, you can also choose Help > deactivate to deactivate your license. When you reopen the application, you can then choose the license this software and enter the Adobe ID linked to your creative cloud subscription.
-
What do I need have fun with my pictures, that is to say that merged two pictures together
An image editing program. Iranview is a free good. Google for the link.
-
Unable to join the domain "DNS name does not exist."
Working on this computer remotely in my company, it has more a problem but at this moment, that we focus on trying to reach the area. We removed everything first to see if it would fix the trust relationship issues she felt the long side not being able to browse the files all computer network or servers.When trying to join the field, that's what we get in the dcdiag.txt in the debug folder.The domain name 'xxxxx' can be a NetBIOS domain name. If this is the case, check that the domain name is properly registered with WINS.If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate an Active Directory (AD DC) domain controller for the domain "xxxxx":The error was: "the DNS name does not exist."(0x0000232B RCODE_NAME_ERROR error code)The query was for the SRV record for _ldap._tcp.dc._msdcs.xxxxxCommon causes of this error are:-The DNS SRV records to locate an AD DC for the domain are not registered in DNS. These records are automatically saved with a DNS server when an AD domain controller is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:198.6.1.5198.6.100.38-One or more of the following areas do not include delegation to its child zone:XXXXX. (the root zone)XXXXX = domainAlso the listed IP addresses have been changed.
I worked on this computer for about 2 days, and then the user is able to work remotely with a server terminal server, they will need access to the server later.Reset the network device - completely. Uninstall the network driver and have someone there install the latest manufacturer.
Manually enter the DNS information for the DNS servers of your company on the computer - even if it uses DHCP.
Make sure that its time/time zone is the same as your DNS server.
Reset all default HOSTS file.
Ping the DNS server.
When you join - use the FQDN (mycompany.local, etc..)
-
I have two computers in a small home network, both running Windows 7. A laptop and the other a PC. The two appear in the network on each computer. The PC shows it belongs to a homegroup, but when I try and join the laptop to the Homegroup PC, following the instructions, including the seizure of the password, it fails. I want to share photos, files and documents, etc.
Any ideas.
Original title: homegroups
Read this discussion and see if it helps you:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/HomeGroup-cannot-figure-out-how-to-share-files/f2ee4a6b-1540-4894-8a80-15168e55fc83>Here is another method that doesn't use homegroup. I've used this between two machines of Win7 and between Win7 and Win8 machine, as well as the topic Win7 and WinXP. I am frustrated with Group residential everything and currently have disabled entirely.
http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/>SC Tom
-
Join the 2 queries with common group by column
IAM trying to reach the results of 2 queries. Myu first query returns as follows.
Like, second
I need to show together and I wrote the request to the below:
Select b.br_id, count (b.mech_code), sum (b.labour_cost), count (a.received_by) in table2 b, table1: a group of b.br_id;
But it doesn't show any errors or shows no results. It just continues the treatment forever. Plese help
Just joined the group two by queries later
Select
b.br_id
b.cnt_mech_code
b.sum_lc
a.cnt_rcvd
de)
Select
b.br_id
count (b.mech_code) cnt_mech_code
sum (b.labour_cost) sum_lc
from table2 b
B.br_id group
) b
, (
Select
Count (a.received_by) cnt_rcvd
Table 1A
A.br_id group
) a
where
b.br_id = a.br_id
-
Hello
I can't join the domain (windows-based).
I want to join my vMA to the domain, but it is always the wrong password
When I follow these steps on my vMA
domainjoin-cli join < domain name > <-domain admin-user >
He invites me authorization error so I tried with sudo
VI-admin@VMA: sudo domainjoin-cli join < domain name > <-user-admin of the field: can I use to connect on my other computers >
then he gives me a wrong password... my password is correct...
I tried on two versions of vMA, 4.1 and 5.1/5.5
any suggestions...
Hey VirtualRay
Your VMA has the same DNS settings in your area?
So if you your vCenter Server ranging from ping vcenter01.mydomain.lan pings is returned correctly?
If so, it should work
1 from the vMA console, run the following command:
sudo domainjoin-cli join
2 when you are prompted, provide the password for the administrator of Active Directory.
On successful authentication, the command adds vMA as a member of the domain. The command also adds entries in the file/etc/hosts with vmaHostname.domainname.
3 restart vMA.
Now you can add a target Active Directory at the VMAs. For the procedure to do this, see Add servers at VMAs targets.
To check the settings of the domain of the vMA
Since the vMA console, run the following command:
sudo domainjoin-cli application
The command displays the name of the domain for which vMA joined.
:
-
Join the domain with existing VM
Hello
How can I join a domain with existing virtual machines? We have a couple of VMs that we want to join a domain via the command (PowerCLI) file. etc name should stay as it is, only a domain join must be made.
Thanks in advance.
CU
Rainer Friedrich
You can try to create a new OSCustomizationSpec (New OSCustomizationSpec) with only the domain (domain, DomainUserName, DomainPassword) join.
Then, apply the OSCustomizationSpec to the VM (s) with the Set-VM cmdlet (and the OSCustomizationSpec parameter).
-
So I'm writing a script to install our vSphere hosts to work with our monitoring software. Right now, it's all done by hand and I would like if possible to automate it. So far, I came up with this. I get to step 5 and that's where it fails. I can get it manually run the Get-VIAccount command, but in the script, it fails.
These are my steps
1. connect to an existing host and retrieve role properties.
2. connect to the new host
3 join the domain.
4. disconnect the new host and reconnect with the credentials of domain
5. get the domain account, role of research/create and add permissions to host
6. enable and configure SNMP
7 restart MGMT officers.
#Variables
$vmhost = "Host03".
$domaintojoin = "Domaine.org".
$domainAlias = "domain".
# $usernametograntpermissions = "service.account".
$rolename = 'team - account control service '.
#Connect to host17 to retrieve the role privileges
to connect-viserver host17
#Extract of privileges for the role of vcenter Monitoring Service
$privsforrole = get-viprivilege-role (get-ferrule-name $rolename)
Server VI #disconnect
disconnect-viserver *-confirm: $false
VSphere hosts #Connect above (enter the credentials of the root when prompted)
SE connect-viserver-Server host03
#Join field
Get-vmhostauthentication - VMhost ctcvsphere3 | Game-VMHostAuthentication-domain $domaintojoin - user %-% - JoinDomain-confirm password password: $false
credentials of the #disconnect root
disconnect-viserver *-confirm: $false
#reconnect with the credentials of domain
SE connect-viserver-Server ctcvsphere3-user username-password password % domain\username
#Get domain account and add to the host
$viAccount = get-VIAccount-DOMAIN-User - ID service.account
# Get the role
$viRole = get-ferrule-name $roleName
If (-not $viRole) {}
throw the "Role of the creation.
New-ferrule-name $rolename - Server $vmhost
Together-ferrule-role (Get-ferrule-name $rolename - Server $vmhost) - AddPrivilege (get-VIPrivilege-id $privsforrole - Server $vmhost)
}
# Add permissions on VMHost
New-VIPermission-Director $viAccount-role $viRole - entity $vmHost
all VIServers #disconnect
Disconnect-VIServer *-confirm: $false
}
#Configure SNMP
Get-vmhostsnmp | set-vmhostsnmp-enabled: $true
Get-vmhostsnmp | game-vmhostsnmp - ReadOnlyCommunity 'SNMP.
#Restart Mgmt officers
Get-VMHostService - VMHost $vmhost | where {$_.} Key - eq "vpxa"} | Restart-VMHostService - Confirm: $falese - ErrorAction SilentlyContinue
Here is my error:
Get-VIAccount: 27/02/2014-16:03:11 VIAccount Get A general system
rror occurred: access to the directory error
C:\ps1\vmware\snmp1.ps1:42 char: 28
+ $viAccount = get-VIAccount < < < < - domain - User - ID SERVICE. ACCOUNT
+ CategoryInfo: NotSpecified: (:)) [Get-VIAccount], SystemError)
+ FullyQualifiedErrorId: Client20_VmHostServiceImpl_RetrieveUserGroups_Vi
Error, VMware.VimAutomation.ViCore.cmdlets.Commands.PermissionManagement.GE
tVIAccount
Get-VIAccount: 27/02/2014-16:03:11 Get - VIAccount VIAccount with the id
"service.account" was not found using the specified filters.
C:\ps1\vmware\snmp1.ps1:42 char: 28
+ $viAccount = get-VIAccount < < < < - domain - User - ID SERVICE. ACCOUNT
+ CategoryInfo: ObjectNotFound: (:)) [Get-VIAccount], VimExceptio)
n
+ FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA
utomation.ViCore.Cmdlets.Commands.PermissionManagement.GetVIAccount
New-VIPermission: Impossible to validate the argument on the parameter "principal." The argument
ent is null or empty. Provide an argument that is not null or empty, and then try
the command again.
C:\ps1\vmware\snmp1.ps1:56 tank: 40
+ New-VIPermission-main < < < < $viAccount - $viRole - entity role
y $vmHost
+ CategoryInfo: InvalidData: (:)) [new VIPermission], ParameterBi)
ndingValidationException
+ FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom
ation.ViCore.Cmdlets.Commands.PermissionManagement.NewVIPermission
The term 'catch' is not recognized as a cmdlet, function, script fi
the, or an executable program. Check the spelling of the name, or if a path has been included
DED, make sure the path is correct, and then try again.
C:\ps1\vmware\snmp1.ps1:57 tank: 12
+ captures < < < < {}
+ CategoryInfo: ObjectNotFound: (catch: String) [], CommandNotFou
ndException
+ FullyQualifiedErrorId: CommandNotFoundException
Thanks in advance!
Dimitar did a nice write-up of this phenomenon and a possible solution.
Maybe you are looking for
-
Change of email on LiveGallery program
How can I change e-mail program used on the Windows Live Photo Gallery? I want to use Outlook Express.
-
Windows 7 automatic update installation KB973688 fails
When KB973688 tries to install fails and returns code 643. Windows 7 update has worked well up until now. It seems as if the failure is associated with this particular update. Any help would be appreciated.
-
How to uninstall fonts that are not yet listed?
I have a font that is really exotic and I don't find it in my list of Windows fonts to remove. Anyone know how I can get rid of him? I bought the HP system recovery discs but am wary of their installation. Thanks in advance for any help.
-
My printer will stop printing, then I get a message indicating that your PSI key stopped working. How can I fix it? WD
-
The GPU and PSU upgrade.
Alright. Well, I'm trying to upgrade my computer which is a HP Pavilion p6823w. http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=es&CC=ve&TaskID=120&prodSeriesId=... I'm going to install a new graphics card and the power supply. I