join to the domain host seems to break my auto deploy?

Similar Questions

• Satellite L30: Join to the domain takes 10 min

  We bought a Tosh Satellite L30 and it came with Vista Basic pre-loaded.

  On our domain, we use software only supported up to Windows XP Pro, Windows XP Pro SP2 has been installed (formatted HARD drive)
  I downloaded XP drivers, (I see there is no chipset driver, only one video/audio etc.) and install

  The laptop seems to be OK when I connect locally (name, username/password / local PC), but is joined to the domain when I try to login (name of domain/name username/password), it takes at least 10 minutes to connect.

  Trying to install a relatively small application to a network drive take at about the same time (usually less than a minute.
  I checked the server and it doesn't seem to be rejecting the laptop

  The only clues I receive are in the event Log.
  It comes up with 3 inputs
  IRQARB ACPI BIOS does not contain an IRQ for the device in PCI 4 connector
  IRQARB ACPI BIOS does not contain an IRQ for the device in PCI 2 connector
  Parallel port service could not start

  Is that which is the cause of the problem?
  I have to update the BIOS? IF I do and it goes wrong, what then!

  Any help greatly appreciated
  See you soon
  Neil

  Hello

  > Can I update the BIOS? IF I do and it goes wrong, what then!

  Especially, if the BIOS update fails, the laptop cannot start and assistance of the ASP is required upgrading the BIOS is always risky and should be done with care.

  With regard to the long connection time
  Well, it's not easy to say what causes this waiting long connection

  The search in the Microsoft Knowledge base I have found only this:
  http://support.Microsoft.com/kb/930062

  You may need to install the chipset drivers mainboard that should be found on the page of the Toshiba driver!

• Portable joined to the domain and now the user files are missing.

  Our server (SBS 2003) crashed and I had to rebuild it and then I had to join a laptop in our area and now all the files for this person is missing.  We use the option synchronize folders when this person was missing and now I wonder where all these files are gone?

  We had no backups (I know, I know) so now we have a couple of people who have lost all their data.  Is there a way to make it back the computer joined to the domain?  Some kind of folder offline connection or cache somewhere?  I checked the documents and Settings folder, but the user profiles 'My Documents' is empty.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Microsoft Outlook and would be better suited in the ClientTechCenter of Windows. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.

• vCenter server join to the domain after installation

  Hello

  I have a windows 2003 with sql Server 2005 in the WORKING Group on this server, I installed virtual center 2.5 now I want to migrate to vcenter 4, but first I have to join to the domain.

  Can perform the join to the domain of this server without problem?

  Thank you

  Fabio Storni

  Yes it should be no problem to joing your Windows 2003 virtual machine to the domain - this will not affect your VC server.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• NSS6000 - no available domain user (join to the domain is OK)

  I have a NSS6000 with "OK to join" my domain name-(firmware 1.21.0)

  correct the DNS configured (without available WINS)

  I have 2 directories Active (windows server 2003, windows Server2008 R2) but no domain user and the groups listed, nor in stock or users

  If I view the CIFS logs, I get:

  June 20 at 12:07:32 NAS-FI-01 nmbd [28494]: Netbios nameserver version 3.0.28a has begun.

  June 20 at 12:07:32 NAS-FI-01 nmbd [28494]: Andrew Tridgell and the Samba Team 1992-2008 Copyright

  June 20 at 12:07:32 NAS-FI-01 winbindd [28497]: [20/06/2011 12:07:32, 1] nsswitch / winbindd.c:main (990)

  June 20 at 12:07:32 NAS-FI-01 winbindd [28497]: the winbindd 3.0.28a version began.

  June 20 at 12:07:32 NAS-FI-01 winbindd [28497]: Andrew Tridgell and the Samba Team 1992-2008 Copyright

  June 20 at 12:07:32 NAS-FI-01 winbindd [28498]: [20/06/2011 12:07:32, 0] nsswitch / winbindd_cache.c:initialize_winbindd_cache (2222)

  June 20 at 12:07:32 NAS-FI-01 winbindd [28498]: initialize_winbindd_cache: empty cache and re-create it with the version number 1

  June 20 at 12:07:33 winbindd NAS-FI-01 [28499]: [20/06/2011 12:07:33, 0] rpc_client / cli_pipe.c:cli_pipe_verify_schannel (354)

  June 20 at 12:07:33 winbindd NAS-FI-01 [28499]: cli_pipe_verify_schannel: auth_len 56.

  June 20 at 12:07:33 winbindd NAS-FI-01 [28498]: [20/06/2011 12:07:33, 1] nsswitch / winbindd_util.c:trustdom_recv (229)

  June 20 at 12:07:33 winbindd NAS-FI-01 [28498]: Could not receive trustdoms

  June 20 at 12:08:01 winbindd NAS-FI-01 [28499]: [20/06/2011 12:08:01, 1] rpc_client / cli_pipe.c:cli_pipe_validate_current_pdu (625)

  June 20 at 12:08:01 winbindd NAS-FI-01 [28499]: cli_pipe_validate_current_pdu: DCERPC RPC fault 0 error code x 00000721 received Since the machine remote DCHOST. DOMAIN.loc pipe \NETLOGON fnum 0xb!

  Thanks, I found what I was looking for.

  http://www.Cisco.com/en/us/docs/storage/NASS/csbcdp/NSS/nss4000_nss6000/release/notes/NSS4000_6000_V...

  (Cisco can't stand not completely joined the NSS for )

  the Server Active Directory of Windows (ADS) on a Windows Server
  2008

  environment.

  Of workaround applies only to a single user.
  (CSCsw93385)

  What I was suggesting in my first post, is if you want a fully
  box of NSS support which is compatible for windows 2008 servers, you must
  to go with the materials of the NSS300 series).

• Computers Dell laptops E5520, joined to the domain with the applications installed suddenly forget everything and goes back to the first bootup users

  I have a Dell laptops 5520 during the first boot, I created an Admin account and set the timezone, etc.  Then I joined laptops to our AD domain, software installed, such as Microsoft Office 2010 and Adobe.  Laptops have worked for a few weeks and now containing several profiles of my domain users.  All of a sudden, some laptops from start-up to the original Admin Login (the first user created).  When I connect, the NetBIOS shows is more that the laptop is part of a domain, and none of the applications that are installed are listed in all programs more (programs and profiles of school boards, however, still exist on the hard disk).  I have system restore disabled by GPO, and I limit the applications of the Panel as well.  I contacted Dell and they have never heard of this issue.  If I join the laptop to the field, he finds the original computer account but this does not all installed software and profiles will reappear.  Here is Windows 7 Professional on a Windows 2008 domain.  Any ideas?

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• Error updating Windows 10: does not work if the PC is joined to the domain

  My company requires that employees upgrade to Windows 10 before the deadline. When I went to install Windows 10 came an error message that says "Windows 10 does not work on this PC" and then told the user account: this PC is connected to a domain. Contact your system administrator

  Does anyone have an idea how to get around this problem? At least 2 other people in our office have successfully upgraded to Windows 10 without feeling it, and another co-worker gets the same error message.

  This is a screenshot of what happens:

  

  Your best option is to download the ISO and upgrade to a Local account.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: upgrade from previous versions of Windows using the file ISO for Windows 10

• VCenter should be joined to the domain?

  Is there a reason to join vCenter in the field? I don't want Windows Server it works on but in vCenter itself? Windows Server is already part of the field. I just took the VMware class and remember it being a setting in vCenter to reach the field or something similar, but I can't. Can someone tell me where this setting is and what exactly its used for?

  See http://kb.vmware.com/kb/1021970 for more details

• What happens if my computer (XP) joined the domain network?

  Hello.  I would like to know a little better on the domain network.  My computer is currently the Working Group on my home network.  I read on the domain network and it is said that

  "If you have a user account on the domain, you can connect to any computer on the domain without needing an account on this computer." (from windows help and support)

  Does that mean exactly?  This means that if my computer joined to the domain, other computers on the same network of domain can access all the files on my computer (the files that I have has not yet implemented to share)? or does this mean that other computers on the domain can connect to my computer as remote desktop? (I do not want that to happen...)

  It seems like a lot that the office uses the domain network and I would like to know how it works.  I read some articles on the field and how to put in place and other things, but I couldn't specify my question.  I appreciate if anyone can help my answer.

  Thank you very much.

  Hello

  Using domain causes a topology around real server (like Windows 2008).

  Companies use this topology because of the size of their system and the need for central control.

  There is no advantage to using such topology for small home network.

  If you use the parameter field and that you do not have a General with your network domain server will not work correctly.

  http://en.Wikipedia.org/wiki/Windows_Server_domain

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to join u1 VCSA 6 back to the domain. Error messages are not found anywhere online.

  I was wondering if someone can help troubleshoot me SSO with a VCSA to 6u1 running. PLEEASE!  This has been updated about a week ago of 6.0 and had no problems until he decided to collapse Monday. At this time, that we had problems with our domain controllers, I don't know if it was related.

  Monday Veeam backup by using a domain account to access VCenter has stopped working. Authentication failure. Try to connect to VCenter WebClient with SSO that weI made for years also failed. Signature as root for web client has as well.

  Signature to the C++ client worked for connections without any problem, but really limited what we can do. So I spare the domain and attempted to join without success.

  I can sign into the web client with [email protected], you try to join the domain as we did before the results in "Idm client exception: error trying to join AD, code error [31], user..." " - no reference to error 31 anywhere. Yes the username in the form of [email protected]. The computer account has been recreated on the field. Connectivity to the domain controller is fine, because if I put the password wrongly, it tells me that authentication has failed. All services on the VCSA are started with the exception of the function Auto-déployer.

  I tried via SSH connected as long as root (it tells me that [email protected] has no shell access) domaine.net/opt/likewise/bin/domainjoin-cli join [email protected] translated by ERROR_GEN_FAILURE [code 0x0000001f], yet once a mistake that relevant results.

  I am unable to create beams journal via the web client or via the C++ client, I suspect because space on the VCSA which I was not able to solve. Execution of the VSAN performance monitoring seem to chew place until I turned it off, but haven't found all the resources online as to where to find them or how to remove.

  I have a snapshot that was done before I got updated to 6u1 8 days ago, but I'm afraid that everything I have done since then will crumble. This VCenter manages a VSAN production, and I can't get him off.

  Please can someone untangle me this mess? With the lack of informative error messages I don't know where to start!

  Thank you

  B

  Woohoo! I finally thought to it.

  To start with I've implemented a new VCenter server as a trial, nothing configured, just deploy the iso 6u1. I found that it was not automatically joined to the domain and has attempted to do. SAME ERROR! So the problem is not with VSphere. In recent weeks, we introduced two new DCs R2 2012 and retired from one of our 2008 R2 domain controllers. I closed the DCs 2012 and tried again with only the old DC on the network. It worked! I was able to join the VCSA test to the field, and after a reboot because the button leave available domain.

  So I she disjoint and then attempted to join the domain when running wireshark on 2008R2 domain controller's NETWORK card. Then, I grew up a DC 2012R2, waited 10 minutes or so close the 2008R2. Yet once, I ran wireshark but this time on the 2012R2 server's NETWORK card. I compare the results of a successful or not join and I saw that the 2012R2 DC has been a lack of outgoing SMB packets to the VCSA. The Server service is running on the domain controller in 2012, but the Microsoft recommendation has been to change startup srv.sys from automatic to manual on 2012 R2 server. I thought it was odd at the time, but we have changed when we put in place the new domain controllers to meet the BPA. I compared it to the registry setting on the 2008R2 domain controller. which has been set to automatic startup.

  So to allow VCSA to join the domain when you get the error 31, cancel it

  http://social.technet.Microsoft.com/wiki/contents/articles/21104.SRV-sys-should-be-set-to-start-on-demand.aspx

  on your server 2012R2 DCs if it has been applied it causes domain join failure.

  Command prompt: sc config srv = auto start

  or

  Register: HKLM:\System\CurrentControlSet\Services\srv\ from 3 to 2

  I hope this saves someone else the time it took me to understand! I guess I can cancel my request for support now...

• Join my xp professional to the domain of Win Server03

  I have a victory server03 set up in my home on a PC. IM using it as a training to wake up computer practice to pass the 70-290 exam. I have another computer with xp professional that I want to join to join to the domain server03. the computer name of the server is Server01 and the domain is contoso.com - when I try to join the domain with the teacher of xp, I get an error saying "the for contoso.com domain controller cannot be contacted. any ideas on what I can do to fix this? Thank you.

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot join Windows Pro 8.1 to the domain

  Hi all

  We run a Server SBS 2011 Standard, a few weeks ago, all machines Windows 8.1 invited to authenticate to access the network mapped drives when connected. I tried hard to pull the issue with no luck. I deleted the machine to the domain and received the error "the specified domain does not exist or could not be contacted", but he joined the field and after the reboot you can connect to mapped drives, but when you restart again the problem is back you must enter your credentials and a password to access the mapped drives It does not work after the first restart when the computer is joined to the domain.

  Here's a few thing I tried?

  1 Verify that the dns server address is correct

  2 tried to join the domain with a static IP address

  3 added manually the DNS server address in the NIC

  If anyone has any suggestions, please help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Join the Parent picture to the domain before you create linked clones?

  Do we not have to attach the image relative to the domain before creating a snapshot, and use it to float pools related clones?

  Agree with Mittim12...   Works either way, but we have our images of parent is joined to the domain before.  This help us to do things that is install OK on the image for domain use for users and allows us to do some more test before we deployment.

  Good luck... 

• View composer quick Prep join the domain

  I use view creating cloned VMs related and fast to join the virtual machines to the domain.

  Virtual machines are created and the reconfiguration of the virtual machine is completed successfully, the computer accounts VM added in the field but when I try to connect to a computer virtual that they are not part of the domain?

  I rebooted the virtual machines to ensure that it was not that and yet, I do not get a domain login prompt?

  Thank you

  P

  pdarcysgi wrote:

  Test again today and I have checked that the virtual machine used to clone took the INVESTIGATION period out of the machine before I stopped him, but still getting the same problem. I also disabled the XP firewall (this shouldn't cause a problem) and I still have the same problem. The virtual machines created, accounts created in the domain, but the machine is still in a working group. ??

  It may be a stupid question, but you have not explicitly stated this: is the snapshot of parent for virtual machines already joined to the domain? It is a difference that often gets overlooked for linked clone pools during their implementation for the first time. For more details, please see the Guide to Administration of View Manager 3.1.