JOINT-2 update: which restarts?
I need to upgrade the JOINT-2 Modules in my 6513 switches worm. 4.x to 5.0.1. (a significant modernization). The procedures show that "the system will restart at the end of the upgrade... ». My question is which system will restart? Will just restart JOINT-2 module or the whole switch?
Just the JOINT - 2, not the switch.
Tags: Cisco Security
Similar Questions
-
I bought a new laptop with Windows 7 installed. Whenever I restart it, it has installed updates which can take up to an hour or freezes. You can ignore the automatic updates of Windows 7?
You can turn off the automatic updates, Yes, but doing so would leave your computer at risk. Simply put with him: after another reboot or two, you will be fully patched AND fix!
Install the Windows updates:
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updatesUpdate your computer:
http://Windows.Microsoft.com/en-us/Windows7/updating-your-computerUnderstand the Windows automatic update:
http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updatingUpdates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questionsChange how Windows installs or notifies you of updates:
http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft -
This is windows vista business.
After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop. ""» I tried to find out latest fashion good and safe, but still the same. Help, please.Is it possible from a different drive to boot and then by applying some changes that would stop it. At the time when the computer is unusable, it just starts to "configuration updated 3/3" then restarts.Hello
Try these methods.
Method 1:
You have to do a cold start, press and hold power for a few seconds (10).
Wait a minute or two and turn it back on.
Make sure that "all the" non-essential devices are disconnected. (USB keys (for example, flash drives) or any other external media like this takes place.).
If you can, start safe mode.
Start your computer in safe mode with network.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
NOTE: see 3 from the link above, Advanced options boot (including safe mode).
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Select Mode safe mode with networking.
Method 2:
Use the system restore feature:
(a) click Start, type system restore in the Search box or search programs and filesand then click on the system restore under the programs section.
(b) on the System Restore page, click Next.
(c) select a restore point during which you know the operating system works, and then click Next.
The restore point should be a date that precedes the first time you encountered the problem.
NOTE: If you use system restore when the computer is in safe mode, you can't undo the restore operation.
See also: error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer when you try to install updates for Windows
http://support.Microsoft.com/kb/949358
Data loss caveat:
Be sure to back up data that you want to keep before you begin. This is to ensure that there is no loss of data.
Method 3:
Step 1:
To avoid this problem on Windows Vista, obtain and install update 937287 from the Microsoft Download Center separately from all other updates on Windows Update site. Install the update that applies to your version of Windows Vista so that you are able to install future updates.
A software update is available for the Windows Vista installation software feature
http://support.Microsoft.com/kb/937287/en-us
The following files are available for download from the Microsoft Download Center:
Windows Vista x 86 systems
http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=15287
Windows Vista x 64 systems
http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=23732
Step 2:
Save the update to a location on your hard drive, you can find and then install the update from there.
Download, *Save* and install the update with no security (antivirus/security suite) software installed, disconnect from the Internet, disable the firewall & close all non-essential processes in the Task Manager.
Disable antivirus programs and firewalls.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Windows Firewall
http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions
Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.
Caution:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.I also recommend taking off of USB keys (for example, flash drives) or any other external media, as this takes place.
When the file is downloaded, see these steps.
(a) right -click on the file and
(b) select run as administrator from the menu.
Check if it helps.
-
When windows update, the restart may end, it says please wait and do not restart unless I closed it and open it in safe mode, what can I do?
Hello
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
If the problem continues to repost in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
I was charged for my coffee game update, which I wasn't aware of. I do not accept to pay about $ 8 for only an update, this game in the first place was free. I want to ask for a return and I will delete the game
Apple or App developers read this forum. If you want a refund, contact the developer to the email address. It is to them that they will refund your or not.
-
Is there a way in which I can download iBooks content directly to iCloud drive through my device (iPhone or iPad),without the use of a Mac?
Otherwise, I suggest and ask for an update which includes my needs inside. Thank you
See synchronize ePub, Books author iBooks and PDFs with iBooks and iCloud - Apple Support.
TT2
-
Non-us Xoom will get the 3.1 update, which includes SD support this week
Non-us Xoom will get the 3.2 update which includes SD support this week
I asked a psychic, she could not be more precise, she needs a photo of Matt without funky shades, the update could start tomorrow.
-
At the start, my phone freezes on the configuration of updates and restarts
At startup, my phone freezes on the configuration of updates and restarts. It won't let me even put my password. Automatically, it restarts and continues to do the same thing over and over again... I need help!
What were the results of the test of the hard drive?
It seems that things go too far and you need to perform a factory restore and reinstall the files on your system.
Repeatedly press the F11 key at startup to enter the Recovery Manager, and then follow the instructions. I hope that the recovery partition is not damaged.
-
Updates, mainly critical updates, which are downloaded and installed manually appear actually Windows XP-> Control Panel-> Add / Remove programs. I use NO automatic update of Windows. I run a batch file to install more than 20 + critical updates, but none of them are showing up for me in the list "Add / Remove Programs". Yes, I have the check box 'Show updates' checked. System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard
Yes. They should display Control Panel Add or remove.
TaurArian [MVP] 2005-2010 - Update Services
-
Windows xp sp3 does not start after the failure of windows update and restart.
Hello
My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.
Can anyone help?
Thank you
Hello
· The updates you have installed prior to this problem?
You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669
-
DCOM98 UPDATE AND RESTART THE OFFICE MANAGER
PLEASE INSTALL DCOM98 UPDATE, RESTART THE DESKTOP MANAGER
You have disconnected your Blackberry to your computer, then install the DCOM98 update and restarted your computer yet?
-
How can I get the product key online for the vista sp2 update which is not genuine
How can I get the product key for activation of vista sp2 update which is not genuine online?
Khaled, you know something that is not Microsoft. Well, I hope that you are not a Microsoft Support Engineer.
Copied from the Microsoft Web site...
The purchase of Windows Vista
Microsoft sells more than Windows Vista, although we will continue to support.
Visit your local retailer or online to buy a PC with Windows Vista. -
my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...
You already have disk cleanup?
Please use this tutorial:
http://www.Vistax64.com/tutorials/76073-disk-cleanup.htmlThe Atlantic tutorial has 2 parts:
Step 1 to 11 is for the classic disk cleanup which will give you back some disc FEPs.
Step 12 until the end (more), is to delete all except the most recent restore points. This will give bring you a ton of disk space.
ATTENTION: Make sure that your computer works OK because you delete restore points.
You have no past point to fall up to restore more new restore points are created. -
BlackBerry Z10 Z10 "Please wait while your device is the software update and restart"
Sorry if this question has been asked elsewhere but I searched and could not find an answer the applies to my particular situation.
I have a Z10 on Bell who got an automatic update this morning (I have no note of my operating system version number or the version that I was updating to) and the phone is locked to the prompt "Please wait while your device is the software update and restart." Update messages said it would take a lot of time and that I should connect my phone if it was less than 20% of battery.
The Bell's Web site indicates that the version of the software is 10.3.2.2168 and the latest version of the OS is 10.3.2.2252. I don't know how many times this site is updated, but I guess that's the version that I am trying to update?
The phone is not fixed... I can see messages turn on the lock screen and interact with the phone to get a glimpse of these messages, but if I try to unlock the phone, the message block appears above any function, I tried to launch (whether a text message, the camera, an email, etc) and I can't interact with the phone at that time otherwise than to lock again and open the lock screen up.
At the time wherever I drag, the prompt.
The prompt on the phone for about 6 hours now. The battery was full this morning and had exhausted 70%, but I've since plugged.
I have not tried a batt pull because I'm afraid of the consequences of this action after the launch of the update.
Everyone knows this and had the phoen back? I know that 6 hours is well past any reasonable wait times in my books and was strongly tempted to restart the device... but is there here experts who recommended that I continue to wait?
I forgot to mention that the power button was still working to give the ability to power off the unit.
In the end, I couldn't wait any longer. I put off the device "no risk" with the power button, rather than using the battery pull method. I turned on the camera back later and the blackberry logo appeared. The screen faded faded black and no lights appeared on the phone.
I could hit to swipe down to get the blackberry logo to return to the screen, but no startup loading progress screen never wouldn't come.
I could never get to the home screen, but the phone was actually 'ON' below. I could call the phone and it should sound, but there is no visual indication that the phone was working and there was no way to respond. Sliding down to unlock simply revealed the word "blackberry" in the middle of the screen.
I did a Batt pull and this time, the logo appeared as before, but disappeared forever... and then the progress of boot screen appear.
The words 'from 10 Blackberry OS' were visible on the bottom and rotate it beween this and "install updates".
Start-up took a LOT of time (15-20 minutes?) but after that, everything was fine.
Displayed software update version information and it is indeed updated to 10.3.2.2168.
-
Select Update which returns no rows
Y at - it no weird side effects that may occur if a select for update which returns no results is never hired? I don't think there is, but I do not know if there would be some sort of overhead or unintended consequences. This isn't a huge issue, but it has developed in some coding I did and I was not able to find documents addressing it.I would say that the only side effect: no other session can make DDL with the selected table.
Maybe you are looking for
-
Can I hide the timeline on the Apple TV when I stop?
I am a big fan of documentaries and love take a break and read evidence written on the screen. Unfortunately, the calendar that appears on the Apple TV when you pause has a huge thumbnail that dims the screen (example below). Is there a way to hide t
-
Internet access Satellite A100-147
I have an Equium A100-147 with Toshiba, I've upgraded to Vista, all seemed well, I can connect to the Internet via the wireless, Ethernet and all OK series at home. I take the laptop for work to connect to the internet via an ethernet connection ever
-
Silent mode switch Lenovo Vibe P1
Hello can I change the powersaving switch in a silent mode switch?
-
accounting software inserts the user name in the modified records,
I have a customer accounting business. A laptop there is a user "Kathy". She connects with Kathy, all I see is Kathy, except when I echo % user_name % the result is 'user '. The problem is that accounting software inserts the user name in the rec
-
BlackBerry Smartphones BB Messenger won't work without a Wi Fi connection
Have you noticed that I'm unable to send / receive messages unless I am connected to a WiFi network. I was in Singapore last week and the only way I could use messenger was to use my laptop as a point using Connectify ad yes I had active data roamin