Similar Questions

• minha foto esta invisível

  minha foto esta invisível amigos of meus para live messeger, what to do para concertar, como o windons download live messenger 2011 para o meu computador?

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page for answers click v (English) in the United States and set on your tongue.

  ==========================================================

  Is a group of peers supported and unfortunately has no real influence answers
  Windows Live.

  Windows Live Messenger has its own Forums and Solutions.

  Windows Live Solution Center
  http://windowslivehelp.com/

  Windows Live Messenger - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=2

  Windows Messenger - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=2

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• driver impressora hp 6122 compat vel com o windows 8.1

  tenho uma impressora hp 6122 s that want em 2002, e estou tentando instala - num netbook gateway, windows 8.1, 32 bit; very, nao estou access'm any, gostaria auxilio para tanto como some type of player compativel; POI, I have a mac osx 10.5.8, em obtive via internet, could e suporte um drive 3.3.1 antigo, that solved perfectly meu problema.

  Hovington has possibility of auxilio p tanto? por getileza!

  No aguardo

  MTO obrigado.

  Vasco Moretti Filho

  Hi Mr TwoPointOh

  Ive been looking day of Hp deskjet 6122 series all a reader alternative printing

  and I found a driver of HP Officejet Pro PCL3 class

  It is a solution for this problem

  TKS for your attention

  Vasco Moretti Filho.

• IK heb bij .nl slim purchase Molfetta adobe creative cloud in September van een al .tot op heden ik temaken squeeze puts een proefversie .ik zal wel iets doing location Molfetta maar hoe kan ik betaalde versie nu will ik heb al vele malen in can en codes

  Hallo

  Voor het maken van een Redeem use code (als dat code is die u has aangekocht via Slim.nl)

  - Help voor inwisselcode

  DAT good u doen via link: https://redeem.licenses.adobe.com/getserial

  Echter als said al volunteers malen is uitgevoerd zonder success.

  Good u het beste opnemen contact met from customer support says zij Hotel voor u controleren.

  Word-Code als niet geaccepteerd, zou u best opnieuw contact along good op het met Slim.nl,

  ordering has u by aanschaf Molfetta slot.

  hopelijk closer said een beetje.

• How to: Crush 3/iMac 5 k (compatibility mode)

  Hello friends,

  I see quite a few new features on the market with Thunderbolt 3. According to the FAQ of TB3 Intel, TB1 and TB2 was designed with future upgrades in mind. This means that you can connect, once a solution is available, on a host of TB2 TB3 system using compatibility mode. It will only work to 20Gbps TB2, but work remains. The same is true of peripheral TB2 TB3 host computer (will work but at slower speed)

  This would be similar to the connection of a USB 3 device on a USB 2 or 1 USB host but only get speeds over slow or vice versa.

  
  

  The question I have is that if someone came out with these fittings/adapters? What I've seen online seems to go using a device of TB2 and TB3 host and each of these adapters is Windows only. I have spent too many hours searching so I'm curious to know if someone has yet to fall on an adapter or converter that connect DisplayPort TB2 host and have the device USB-C/TB3 (USB - C not only) in compatibility mode.

  The reason? Peripheral TB3 are already less expensive than TB2 devices. I don't know who will get the most expensive. I don't care 40Gbps if he gives me a simple way to add multiple devices USB 3.0, exhibitions and maybe the eSata device. I know there are hubs, but I would prefer something that is the test of the future TB3 would be cheaper and future proof for NeXTGen computers.

  (Sorry for the TL; DR but it is always a person who does not read or "assume" it is a noob question and gives an answer "Captain Obvious". Don't BE this guy here...)
  

  Sincere greetings,

  Jorge Uptown

  JLopez. Chicago wrote:

  The question I have is that if someone came out with these fittings/adapters?

  bolt-adapter https://www.StarTech.com/cables/Thunderbolt-3-cables/Thunderbolt-3-USB-c-Thunder ~ TBT3TBTADAP

  

• How to repair Mac Pro does not start

  MY Mac Pro when they start up Logo right, Apple may see

  Hi jorge, this is a topic of Apple Support on what to do if your Mac does not illuminate.

  https://support.Apple.com/en-us/HT204267

  If you have another Mac, you can try to boot in target disk Mode and make a backup of your files.

  Share files between two computers with target - Apple Support disk mode

  Then you can try following the advice of this user tip

  .. Step by step to fix your Mac

  Another possibility is trying to boot now the command option + keys r to your recovery volume. If it works, re - install OS X on the internet. https://support.Apple.com/en-us/HT201314

• How to get rid of manual paragraphs spacing between lines

  Hello!

  Long story short, I have a document from page 2000 (300 k + words) that I'm currently formatting and proofreading, it is a very old book that has been digitized and typed upward by a computer.

  To clarify my question:

  There is a problem throughout the whole of the text: rather than use auto-spacing, defined by the margins of the document, there is a new paragraph between each line. It looks like this:

  Lorem ipsum dolor sit amet,

  195kgs adipiscing elit.

  SED, egestas had metus. DUIs

  fitness, neque nec finished-

  bus placerat, mi risus conv

  Allis metus, hendrerit EU-

  URIs quam non arcu.

  Since volutpat lectus vel

  dictum dignissim elit elit

  justo, EU accumsan fermentum

  SAPIEN and felis Tellus.

  Instead:

  Lorem ipsum dolor sit amet, adipiscing elit computer. SED, egestas had metus. DUIs fitness neque nec finibus placerat, mi convallis metus, hendrerit quam non arcu mauris EU risus.

  Amongst volutpat lectus vel dictum dignissim elit elit justo, EU sapien tellus and felis accumsan fermentum.

  Is it possible to automate the deletion of all of these spaces of paragraph?

  Pages seems to recognize hyphens where the words are divided into two paragraphs and treats these automatically, completing the word, when the paragraph is deleted manually, so I guess that there is a kind of function to do.

  I know there are ways to do this by converting the text in plain text, but it would eliminate all other formatting, whole paragraphs are always separated in the text a bit correctly.

  Is there an online tool or something similar?

  I feel that there must be another way to proceed in the way that entirely manual, which takes a few seconds according to paragraph (71000 of them in the document = about 4 days ago)

  Thanks in advance!

  It is simply the recognition of patterns and then find and replace on them.

  In this case, there is a return after each line, except two, between paragraphs, so search on both and replace those with a distinctive marker for example < r > then find on the single remaining returns and replace those who have a space to speak.

  Then go back and search for the < r > and replace those with a return.

  But you will find there is much more to a text clean only a few returns. There are also spaces around punctuation and common mistakes around the legs, media, etc.

  5 pages is a very bad tool to do this, Pages ' 09 was better, but still not ideal.

  Use a text as LibreOffice [free] or text dedicated as TextSoapcleaners.

  Peter

• iCloud Bookmarks Sync &amp; Firefox Extension

  So I try to synchronize my PC (Firefox browser) to iCloud. I have everything works except synchronization of bookmarks. On the Panel from iCloud, I check Firefox like browser I want to synchronize bookmarks with and he told me that I have * MUST * install an extension to work. I click on the download button and it takes me to the page of the Extension of Mozilla... except she starts on a 404 error (not found). All the links that I found which refers to this post for links to the same 404' ed page and seems not be anywhere I can download it manually either.

  Any help here? Perhaps someone with the extension already downloaded and upload it somewhere else?

  I ran into the same thing today (July 20, 2016).  I was tired of using IE, and so had added Firefox to my browsing pleasure, but when I went to sync my favorite iCloud I received also the page "module not found".

  I think that Mozilla "blacklisted" the Firefox Extension on May 17, 2016.

  Here are some links, but no real answers on where to go to get the Extension because you can not get it directly from the Mozilla community currently:

  iCloud bookmark - download link for Firefox Extension (Mozilla)

  https://addons.Mozilla.org/en-GB/Firefox/addon/icloud-bookmarks/

  Currently (July20) gives some indication "we are sorry, but we are unable to find what you are looking for."

  iCloud bookmark - Firefox Extension - information on the blacklist (Mozilla) Page

  https://addons.Mozilla.org/en-us/Firefox/blocked/i1214

  favorite iCloud has been blocked for your protection

  Blocked on May 17, 2016. View block request.

  Why he was blocked?  This add-on is causing persistent and frequent crashing.

  Who is affected?  All users of this add-on. If you want to continue using it, you can activate it in the Add-ons Manager.

  What does that mean?  Users are strongly encouraged to disable the problematic add-on or plugin, but can choose to continue to use it if they accept the risks described.
  When Mozilla takes knowledge modules, plugins or any other third party software that compromises the security, stability, or performance Firefox seriously and who meet certain criteria, the software can be blocked from generalization. For more information, please read this support article.

  Blocked on May 17, 2016. View block request.

  iCloud bookmark - Firefox Extension 'Blocklisting' (Mozilla)

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1271358

  Block above request shows that it has been corrected or resolved on May 27, 2016, but still get the "we're sorry, but we are unable to find what you are looking for dedicated" message.

  Which	When	What	Deleted	Added
  Jorge	2016-05-16 11:20:16 PDT	Assignee	person not	Ben
  Ben	2016-05-17 09:57:12 PDT	Status	New	SOLVED
  		Resolution	---	FIXED
  		Finally solved		2016-05-17 16:57:12
  Bugzilla	2016-05-27 10:38:23 PDT	CC		Bugzilla

  See you soon

• iMac 5K is unable to see the video after standby or sleep screen

  Hello

  whenever I leave my computer and get back to work on it, the screen goes black and won't turn on again.

  Thank God I have a macbook pro and you can access the iMac via desktop remotely to continue my job or restart it.

  but its getting very boring. Everyone knows the same problem?

  Jorge.

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

• Two messages appear on the screen of Portege R

  Hello

  I'm a newcomer, has soon
  I have a small problem when I start my Portege
  Before that I could use, two windows appear on the screen saying in Portuguese:

  Window 1

  Problema ao iniciar C:\Users\Vasco Afonso\AppData\Local\FormBalance\Bin\FormBalance.d he's X

  Impossível service o modulo especificado

  Window 2

  Problema ao iniciar C:\Users\Vasco Afonso\AppData\Local\DinerVirtual\Bin\DinerVitual X. DLL

  Impossível service o modulo especificado

  I ran twice MacAfee antivirus software and clean some Associates book lines, but it remains the same I boot the laptop.

  Clues appreciated, please

  Concerning

  V.

  Download and install https://www.piriform.com/ccleaner/download

  This program can remove the wrong file references.

• Portege M300-101 - How to access the recovery partition?

  Hello

  I have a laptop Portege M300-101 model PPM30E-00G019SP
  I have problems and need to re install the original operating system.
  There is a 2.5 MB partition where the laptop recovery system.

  But I have no way to access it.
  In addition to the documentation that there is software to access this partition, but is not installed.

  Could someone guide me and help?
  Thank you
  Jorge

  Hello

  If I remember well, you can install WXP again using two different methods:
  -Restoration of created media recovery do you have created following the advice in the manuals?
  -Restoration of the drive HARD recovery on page 69 you can find detailed instructions how to proceed.

  You wrote: there is a program to access this partition but is not installed.
  What program do you mean exactly?

• TECRA S5 Nvidia Quadro NVS130M - sudden BSOD - Win 7 Pro 32-bit

  After moving from Vista to Windows 7, everything worked fine until two days ago, when suddenly my laptop stopped working. I had to hard restart it, and then all hell broke loose.

  The problem is the following:

  Info part number: PTS53E-00S009EP - Toshiba Tecra S5 - 2 GB Ram Intel Core 2 Duo T7300 2.0 Ghz - Nivdia Quadro NVS130M

  Windows 7 Professional 32-Bit started to report all of a sudden and the error code 43 for the graphics card (Nvidia Quadro NVS130M). I got the latest nvidia drivers, so I uninstalled the previous and restarted the machine and installed the new. After the restart, the laptop crashed with a blue screen.

  I went back to the last known good configuration (drivers vga adapter default of windows, which does not recognize the Nvidia Quadro NVS130M) and the laptop booted up normally allow me to get back into Windows.

  I went to the Nvidia drivers previous, and arrived the same problem, blue screen, go back to the last known good configuration (by default windows vga adapter driver).

  I went back to the latest drivers for the Nvidia Quadro NVS130M found on the download from Toshiba site, same situation as before.

  I went backwards to the oldest drivers on the Toshiba Support downloads site, and the question remains.

  Since August, I have Windows 7 Professional 32 - Bit and it worked fine, it is completely up to date, and have always used the two wit the factory default Vista and Windows 7 Nvidia drivers.

  I have installed windows updates recently, the latest being early November 2011.

  That recent change, about 15 days ago, it's that I've finally found the drivers for the SD card reader, they where for windows XP it is interesting enough, but Windows 7 immediately recognized the SD reader that she had not until then. He could not yet identify the kind of material, it has been.

  I tried to uninstall the drivers from toshiba for the reader of SD card, but even in this case with this uninstalled and hardware disabled in the management of the material, when I try to use the factory drivers downloaded from Toshiba blue screen happens again.

  Another symptom, I noticed is if the blue screen do not occur (when he does it specifically lists a file from drivers nvidia as the cause), the computer will stay with a black screen and the fan will operate at extremely high speed, but there seems to be no HARD disk activity, as the drive HARD activity on the laptop does not light at all.

  I read there is a problem that can lead to the computer by blocking or gel at least that the latest version of the UPEK software is used. However it does not mention anything on a blue screen. Also, given that the blue screen error message specifies a Nvidia driver file name, he wouldn't do much sense this problem it was the UPEK fingerprint software that was the cause.

  He wouldn't make any sense at all because if I leave the default vga only adapter driver and do not install a driver for the graphics card, everything works well, reader SD, UPEK Figerprinting, etc...

  I had all this work, including the fingerprinting software until exactly two days ago for what the confusing too me.

  I ran Endpoint Protection AV software from Symantec, the computer is perfectly clean, there is no virri and indication as abnormal.

  I'm now totally ideas and I can't seem to find information on this topic.

  Your help is very appreciated and urgent, because if all else fails, I would be forced to go back to Vista, something that I wouldn't really really really like to do, because of the hassle of reinstalling OS, Office and software for a total of more than 50 GB and due to the fact that Vista is significantly lower in so many aspects to Windows 7.

  Thanks in advance for your help and support.

  Post edited by: Jörger

  Post edited by: Jörger - Typos

  Post edited by: Jörger - Typos & lack Party Info

  Hi Jorge,.

  I've also read about pilot of fingerprints that cause a freeze on the Tecra series but as far as I know it was about A11 and M11 series S5 shouldn't be affected, but to be honest, the described issue looks more like a problem of graphics chip
  Eventually it s graphic driver not question but related graphic chip problem

  But have you tried to test the laptop with the new OS preinstalled? Try this and use the operating system has been pre-installed by Toshiba in this case, you might check if he s really a problem or a chip driver problem

• HP Pavilion 17-e123cl: need to reset password BIOS HP Pavilion 17

  I forgot my BIOS password and after a few failed attempts, I get the following message:

  System disabled

  [88988223]

  Can I get help with this?

  Please and thank you.

  Jorge

  Try: 37680805

  Concerning

  Visruth

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Audio for internal speakers on HP620 lost

  I lost the sound on my HP 620 laptop. In the control manager and device Audio everything seems perfect: drivers are visible and it is stated "this device works correctly. I can see the green bar in moving Volume control when I test audio, BUT nothing out of the internal speakers.

  There are two features in Audio playback:

  Speakers/headphones IDT High Definition Audio CODEC and

  IDT High Definition Audio CODEC, headphones (real time data).

  I tried to uninstall the device speakers/headphones, download the latest version of the driver from HP and install again, but no luck.

  When I connect the computer to the TV via HDMI the sound works fine.

  Now, the only big change I can think of is an update of the BIOS this HP Support Assistant made on June 2. Sound problems started before that.

  I haver a HP 620 serial number: {deleted personal information}, product number: WT249EA #UUW, Vista 64-bit.

  I hope someone can help, Mikael

  Nice day.

  It is for those who have trouble on HP speakres.

  I have a problem that does not work my speakers, ut I have sound when I connect the headphones. I tried everything, reading on the web and encourages all solutions, but nothing happens.

  Finally I just blow into the headset connector and use tootpick to clean the inside of the connector.

  The inside of the connector, there is litlle relay. When the headphones are connectet who relay turning off the speakers and spend his helmet. So, if there is dust this relay can stay in closed mode and its cannot 'go' to the speakers.

  So, I hope that Martin will help you with your problem!

  I'm sorry if may gramm wasn't verry vell.