Audio for internal speakers on HP620 lost

Similar Questions

• audio output lists only the internal speakers when usb is connected to the dac

  This problem happened after I had used my mbp for months as music server in a stereo system.  When I have the mbp connected via USB to an external digital to analog converter (dac), audio preferences had always listed the CAD.  Now it lists only the internal speakers.  I tried to reboot, checked my UBS cable, checked my dac.  The only thing I've done recently is to create a playlist and sync a new iPod to copy the playlist we.  I don't know if that could have anything to create the problem of lack of dac, but I am a relative novice on computers.

  Anyone have this problem or knows how to fix?

  -Try other USB port

  -The signs to see the CASD of life like the lights on?

  -Maybe the CAD failed.

  -Try the following

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• I have iTunes for Windows 10.  iTunes will not play the music through my internal speakers when they are defined by default.  iTunes will play through the headset.  My speakers will play with other applications.  Why is this?

  I have iTunes on Windows 10.  iTunes does not recognize my internal speakers when other applications will recognize them.  I can use the helmet without a problem.  Why is this?

  If you go to iTunes/Edit/Preferences/reading and select 'Audio Direct' for 'use of Audio play '.  Then log off iTunes and back log and you should be able to hear through your headphones.  Good luck!

• No Audio signal from the laptop internal speakers

  I have Dell inspiron N4010 what me about his problem. No sound from internal speakers of my laptop its time as well in the headphone and external speaker, no any problem with external headphone and speaker. During the test equipment test sounds from speakers properly (enable Dell diagnostics by pressing F12 during startup [PSA or ePSA]). Support everything about audio working properly.
  I have try it with various media players but the problem is to stay. About the audio driver is up-to-date.
  System running on Windows 7 ultimate 64-bit edition. Audio driver version that is installed is Realtek High Definition Audio Driver 6.0.1.6088 (R272187).

  Someone recommend me the "speakers" should be fixed by default playback device then speakers already device read by default.
  

  avi6196

  "' tell me exactly what I say my laptop needs to change only the" Circuit Jack or complete motherboard "

  I don't think that the Inspiron 14R N4010 was a plank of jack, but I found this part parts-people (they specialize in Dell parts).

  http://www.parts-people.com/index.php?action=item&ID=7629

  Calling people pieces with any questions on this part.

  avi6196

  Workarounds for a PIN sense failed

  See Section V of the headphone FAQ. You can try workarounds 3, 4 and 5 and see if something works for you.

• Re: Need internal speakers for Satellite A105

  I have a Satellite A105-S1013 laptop and need to replace the two internal speakers, which are slaughtered. Is there more than one distributor of parts to the United States I can contact?
  A Toshiba recommended charge $ 45, plus $10 shipping, which seems a bit much.

  Anyone knows of multiple sources?

  I recommend you ask the same question on Toshiba U.S. forum http://laptopforums.toshiba.com/tshb/
  Maybe the people of the United States know better where to find spare parts.

  By the way: check eBay US. With a little luck you can find speakers out there. I saw that many pieces for Toshiba laptops on eBay and you can get them for a few dollars only.

• Satellite L650 internal speakers not working not not only audio with headphones

  Hi all

  As the title says, my internal speakers stopped working for a day.
  The sound works perfectly when I plug headphones (or speakers).

  I tried things include:
  -check all the sound options related to windows
  -restoration of the laptop when he worked at
  -Reinstall the drivers.

  The speakers are shown playing in the window configuration of the sound when I play a sound, I mean just nothing...

  If you have another suggestion, please share it.

  Thanks in advance!

  You can do last test and reinstall the OS using original recovery image, that you got with your laptop.
  Check the functionality with the factory settings.

• lost audio for music or video

  I write in the name of the customer. The customer lost the audio for music or video.

  Hello

  • What were the changes made before the issue occur?
  • How long have you been faced with this problem?

  You can check this link which can help you to solve your problem:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• I configured for HDMI in Vista home edition and now cannot get back my internal speakers by default

  to get the connection HDMI to my TV, I chose HDMI in the sounds menu. When I made the choice of internal speaker has disappeared.  Now I can't go back to what the internal speakers as my default on my computer laptop gateway. The choice of the internal speakers is no longer show up as an option when I try to reset it.

  Do you have your try right click on an empty space on the reading tab, then click on "Show disabled devices" and "Show disconnected devices" in the context menu that is displayed? Sound in the Control Panel, sounds, read tab.

• MacMini-digital server: only internal speakers?

  I've implemented a Macmini with digital music files to play through my stereo system with a remote ipad. But the mini will play only with internal speakers, even if it detects the CAD that I use.

  I tried selecting the DAC in the audio section of the mini, and I open the Apple Midi file. Once again, the mini is aware of the CAD, but even when it is selected, the Mini sends the sound for only its own internal speakers.  Unknown yet, when I 'speaker setup' and test to the left and to the right, the sound test IS sent to the stereo speakers. Frustrating!

  Any help much appreciated!

  Reset the NVRAM, according to > How to reset the NVRAM on your Mac - Apple Support and then try to choose external speakers.

• 23 - c010xt envy: internal speakers continue to work after plugging in the speakers external or headphones

  I got this computer for years with no problems. I use external speakers connected to the audio jack on the back. Once you plug in external speakers (or headphones), the internal speakers are disabled as expected.

  Last night my PC automatically installed the anniversary of Windows Update (update feature Windows 10, 1607 version). After this update, now my two internal speakers and external speakers are working at the same time! I can't turn off the internal speakers without also turning off my external speakers. The volume affects both sets of speakers as well. I tried to disable audio and re-clearance but that did not help.

  How can I go back to my original audio behavior where connect speakers external (or headphones) to the rear Socket 3.5 mm would automatically turn off the internal speakers? Thank you.

  Diameter of thank you!

  I couldn't select no other devices in reading or recording tab becuse it is said that they are "not connected". Update drivers, said that later I have already.

  But when I checked the other post, he fixed it! Now I get only audio speakers again... just like before and how it was supposed to be. Thanks again.

  Windows 10. So I did some research on a Microsoft support forum and I found this solution:

  • Access the device driver software manager - right click on IDT high definition audio CODEC - updated.
  • Choose "Browse my computer for driver software" - choose "Let Me pick from a list of drivers for devices on my computer.
  • Select "High Definition Audio Device" (not IDT high def...)  This is important) and click Next. You get a warning message but answer 'yes '.
  • Once windows have updated driver software, try to play the audio again and check.

• Spectrum of HP x 360: missing internal speakers

  Hello

  I turned on my computer after the last update came and my computer can't find my internal speakers. It can find my bluetooth connected beats pill and headsets, but when I go to the audio peripheral page there is no entry for my interal speakers.

  Can someone please?

  Thank you

  Hello

  Try the following.

  Download Conexant HD Audio Setup on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp77501-78000/sp77502.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right-click the Conexant device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72025.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right-click on the setup of Conexant and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K

• Internal speakers on my HP ENVY TouchSmart all-in-One desktop PC 23-d027c no longer works

  Hello

  I just bought my HP ENVY 23-d027c TouchSmart all-in-One PC of office a few days ago.  It was working fine until I tested the speakers.  When you watch youtube videos, the internal speakers will stop working, while the mute button is not enabled.  It takes a few minutes, and then the speakers work again, only to cut out once more.  IT IS SO FRUSTRATING!  What's weirder, I put a dvd to see if it was the speakers, but the audio on the dvd seems to work very well.  Also, when I use headphones, the speakers work fine.  I don't know what the deal is, but according to my research, this seems to be a fairly common phenomenon on HP computers.  I'm struggling on the Exchange on this computer.  IF this isn't a simple solution, this machine will return to the store!

  Help, please!

  Thank you in advance!

  Wayne

  Hello MakCo,

  Your speakers are not working correctly.

  Go to Device Manager, uninstall the IDT audio and restart the computer.

  Uninstall it and reinstall the audio driver.

  Here is a link to the Device Manager.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  I would like to know how everything goes

  Nice day.

• Satellite A300D - 14 d - no sound on internal speakers

  Hey, I'm sorry for my bad English.

  I just restored my Satellite A300D - 14 d to its default settings. If all the drivers and software are as I bought the laptop. The sound worked fine but after restarting the computer laptop 2 or 3 times because of the Windows Vista updates, the its all just disappeared. The internal speakers are pregnant harman/kardon.

  If I plug my headphones everything works fine, but I want to listen to the music via the internal speakers. If I unplug my headphones but there is no of his coming through the laptop speakers, I hear nothing.

  I tried his last card drivers form the home page of the support from toshiba for the A300D - 14 d, without a succsess.

  Need help pls!

  Hi Schurik,

  Have you verified that the windows audio settings? Usually in driver audio, you can switch between the audio output on speakres internal and external speakers (headphone).
  Check this box!

  What service pack for Vista is installed? More recent SP2 is installed?

• How to disable the internal speakers?

  I have Windows 7 and are the standard audio Realtek.
  When I plug a set of external speakers, internal speakers are not automatically turned off, and I can't understand to change this setting. Anyone?
  I use the laptop for professional presentations, in front of a large audience and I need these speakers to transform...!
  Thanx.

  Hi thysgc,

  I think that it would be necessary to show a little more detail on your laptop, which model you have exactly?

  Normally if you connect external speakers, a window driver sound will pop up where you can choose between connected headphone or line out (external speakers), but both options will shut off the internal speakers.

  In any case, have you checked the Web from Toshiba site for the pilot of his most recent?

• internal speakers on my hp Pavilion do not work

  I have a HP Pavilion dv6700 and my internal speakers stopped working. I went to check and the system says they are working, but not sound. Any ideas?

  Hello

  Try the following.

  Download the Realtek Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp38501-39000/sp38899.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows Vista.

  After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K