JPEG file save and the rate of loss in PSE

Similar Questions

• No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not work

  Windows Media Player

  No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file."  And the media player does not work

  Reset the WMP.

  Step by step instructions are given here: -.

  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/

• All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work.

  Original title:. Nothing works.

  All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.

  Safe mode?

  Looks like you have a virus/trojan/worm infection pretty good...

  Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility.  Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Al Convert JPEG file a PDF the size is very large y al conbinarlo con otros archivos is muy disparejo, como hago para los queden JPEG full size?

  Al Convert JPEG file a PDF the size is very large y al combinarlo con otros archivos is muy disparejo, como hago para los queden JPEG full size?

  Hey James,.

  When you convert a pdf document to jpeg format, there are adjustment possibilities using which you can reduce the size of the document.

  Please make sure the fixed screen capture.

  

  Kind regards

  Ajlan Huda.

• I need to change my retouched a psd file in a jpeg file without losing the layers.

  When I try to "save under" a jpeg file, a warning window tells me I have to save it as a copy I'll lose my layers? Please notify.

  suezans89729982 wrote:

  When I try to "save under" a jpeg file, a warning window tells me I have to save it as a copy I'll lose my layers? Please notify.

  JPEG file format does not support maintaining the structure of the layer.

  Suggest you save critical files such as JPEG and PSD.

• Error messgae: "the screen saver cannot run because it requires a more recent video card", attempting to display the screen saver and the error code 40 download the fix.

  Original title: cannot run zip; error code 40 (hotfix for the video card)

  Hi, I ' m trying to view my screen saver and it seems to be causing "the screen saver can't run because it requires a newer video card or compatible with 3d graphics." (2030 M-windows7 dell) .thanks Jean-Michel

  Hi John,.

  1. what screen saver are you trying to view?

  2 is confined to a specific screen saver?

  3. have you installed SP1 for Windows 7?

  This problem occurs because of a problem in 3D screensavers.

  Fix error occurs if you have a corrupt hotfix package or may have downloaded the wrong patch for your platform.

  This can also occur if the hotfix is included in SP1 and you have already installed Windows 7 SP1.

  Method 1:

  You must make sure that the hotfix you download is depending on the version of Windows 7 installed on your computer.

  For more information, see the article:

  Error message when you set a 3D screen saver screen saver in Windows 7 or in Windows Server 2008 R2: "the screen saver can't run because it requires a more recent or Direct3D-compatible video card.

  Please see if you can copy the file that you downloaded to another computer or location and try to unpack.

  When you download the fix, save it in a new location (on the desktop) and the password given with the fix allows to extract the file.

  Method 2:

  Step 1:

  You can also try to run the display quality Troubleshooter and check if it helps.

  Step 2:

  You too, try to install the latest version of the Site Web of Dell display drivers and check if it helps.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Exporting JPEG files: artifacts of the image will not disappear

  This seems to be a problem with InDesign in general. For reasons that I will not enter, it is an asset of the image that is printed to 700dpi. When I export a JPEG from InDesign, I get the really strange image artifacts that won't disappear soon whatever I do.

  Detail of the normal JPEG image at 72 dpi:

  

  Export InDesign JPEG at 72 dpi:

  

  Any ideas? When I export to higher than 72 dpi, I always get these bands, they are just spaced farther because of the higher resolution. But they are still there.

  ophello wrote:

  I wonder how do in InDesign. If the answer is "it cannot be done" then just say that.

  Can't do.

  But here's the thing... maybe he can. Experienced professionals who need quality JPEG output simply don't pursue through the export of InDesign, and so perhaps the process has not been explored and optimized by anyone who is interested and competent enough to nail down.

  Little you won't context:

  For the regulars of the forum, sometimes it feels like there is a parade without end of relatively inexperienced users, who expect an application to do everything, or they come here to share their dismay over the fact that "even Microsoft Word has this unit or this automatic function... I would have never expected a plant like InDesign to be so far behind... "There is no shortage of bizarre and convoluted workflows based on 'it allows me to do that, which means I should...". "Troublesome JPEG export InDesign and workflow built around it are common themes in the recurring nightmare.

  So please forgive us for expected is not to that:

  I have a workflow that uses applescript droplets to export a JPG of each print file reference to be included in the packages sent to print...

  This is yet another example of erroneous workflow (automated yet), I think that you would have received more sympathetic responses if we had known, even if the result was no different.

• What are the files save to the server?

  Hello, I am currently evaluate the demo version of RoboHelp and have developed a sample project to WebHelp. My next step is to save the relevant files on one of our servers to see how it behaves, but I can't determine what files I need to save to the server. Can anyone help?

  Unless you have purchased the RoboEngine, there no reason to generate Webhelp Pro (exit on server dedicated to track usage, providing the natural language search, etc.). Webhelp is fine.

  The first user interface panel is where you set the start page and the default page to generate the output on your local machine. (I recommend that you change the default! SSL! path to a completely outside the HR Program Files directory.)

  The fourth user interface panel is where you set the directories of the server where you want to publish this same output. The beauty of the edition, is that HR will publish only the few files that have changed since the previous release, all the production each time (less network traffic).

  Good luck
  Leon

• Query on sample no. and the rate of NI9233

  I use NI9233 to acquire signals. Given that the node "DAQ assistant" that only entries of no.. samples and the sampling frequency. I thought that the sampling period is equal to n. samples/sample rates but couldn't always get the correct acquisition time. So, what is the quantitative correlation of no.. samples and the sampling frequency? How would I calculate the acquisition time once I put these two parameters?

  Thank you very much.

  The NI 9233 has a limited number of sampling frequencies discreet as described in the specifications under 'Debits '.  If your chosen sample rate is not supported by the module, DAQmx will force second.  For example, a sample rate of 48 kHz will be forced to 50 kHz.

• How to display the file size and the number of files in the folder

  I have a laptop and a desktop at home. When I open a folder on my laptop, my laptop display size (on the bottom right corner) and the number of objects (at the corner of bootom left hand) of this file the bottom of the window.  But I don't see this information on my desk. I tried to play with the Option - view folders... but always in vain.  Can I know what is the correct way of doing things?

  Hello cscs77, welcome.

  The option that you are referring to I think would be the bar of "Status". This gives a test:

  1. open 'My Documents '.
  2. at the top, click on view > status bar

  That should solve your problem. Let us know,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• verification of the file system and the disk check

  I always thought I knew.
  But I'll have more in addition to the doubts and uncertainties.

  When is to perform the verification of the file system?
  When is to perform the disk check?

  t-4-2

  Hello

  SFC/scannow - run when you suspect that there may be a file system corruption as it will check the digital
  Signatures. Of course, SFC will attempt to overwrite any file that is not signed correctly. For many errors
  It should be considered a first step in the effort to repair.

  How to repair the operating system and how to restore the configuration of the operating system to a previous version
  point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  System File Checker
  http://msdn.Microsoft.com/en-us/library/aa382541 (vs.85) .aspx

  System File Checker
  http://en.Wikipedia.org/wiki/System_File_Checker

  ==================================================

  CheckDisk (chkdsk) should be run every time you think that hard drive corruption as possible which could be
  1 file on the disc as it verifies the logical integrity of the disc. My preference is to run it also
  SFC is executed at any time, especially if there was any found errors.

  This explains how Vista and Windows 7 checkdisk (chkdsk)

  An explanation of CHKDSK and the new /C and /I switches
  http://support.Microsoft.com/kb/187941

  Chkdsk
  http://en.Wikipedia.org/wiki/chkdsk

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why the file adapter and the FTP adapter are called not transactional

  Hello

  
  

  In the sense Oracle SOA Suite of 'Transactional Services no' are services that does not modify data. That's what I read on the internet, but even that dose not justify as in the Oracle doc it is mentioned that:

  
  

  Suite of adapter are transactional: DB adapter, adapter to JMS, AQ, MQ, Oracle App adapter adapters

  Suite of adapter are Notransactional : file adapter, the FTP adapter.

  
  

  Now, according to the meaning of 'Transactional resource no' must not modify data but I can see operations are the same in the JMS adapter and also file read and write adapter

  In the FTP adapter also I see similar Get and Put operation.

  
  

  Maybe I do not get correct sense of the word nontransactional or maybe I'm wrong understand its meaning.

  Please clarify for me why File adapter and adapter FTP are called from other nontransactional maps

  
  

  
  

  Thank you.

  
  

  Transactional here means the ability to participate in a transaction (global or local) and the ability to restore once the treatment fails down the line in the message stream. File, FTP, and other non-transactional adapters do not have this capacity. Therefore the changes through these adapters are not rolled back if message processing meets as matter later in the stream.

  This could be more useful - http://docs.oracle.com/middleware/1213/adapters/TKADP/life_cycle.htm#CIACFIFB

  HTH,

  Sandeep

• "The Archivelog file size" and the question of 'db_recovery_file_dest_size.

  Hello

  According to the literature, DB_RECOVERY_FILE_DEST specifies the default location for the flash recovery area. The flash recovery area contains copies of files of control current multiplexes and remake online of newspapers, but also archived redo logs

  And DB_RECOVERY_FILE_DEST_SIZE specifies (in bytes) of the strict limit on the total space to be used by the target database recovery files created in the flash recovery area.

  Here's the info from my database (10 gr 2, RHEL 64-bit database is in archivelog mode):

  Log_archive_dest_1 = ' LOCATION = + recovery /'

  db_recovery_file_dest = '+ RECOVERY. "

  db_recovery_file_dest_size = 550 GB

  -Size of archivelog files:

  Select

  SUM(BLOCKS * BLOCK_SIZE)/1024/1024/1024 SIZE_GB

  Of

  V$ ARCHIVED_LOG

  -> 672,39 GB

  If I have question used flash recovery area space, it is to be:

  SELECT name

  , ceil (space_limit / 1024 / 1024) SIZE_M

  , ceil (space_used / 1024 / 1024) USED_M

  , decode (nvl (space_used, 0),)

  0, 0

  ceil ((space_used / space_limit) * 100)) PCT_USED

  V $ recovery_file_dest

  ORDER BY name

  NAME SIZE_M USED_M PCT_USED

  + 563200 8 1 RECOVERY

  I'm confused where are the archivelogs saved if not + recovery?

  Total current total size of ARCHIVELOG files if "672.39" but especially the request saying that only 8% of the db_recovery_file_dest was used. So obviously they are either not in + RECOVERY or they are not accounted for.

  I chedk on ASM using asmcmd:

  ASMCMD > cd ARCHIVELOG

  ASMCMD > ls

  2013_09_05 /.

  2013_09_06 /.

  2013_09_09 /.

  2013_09_10 /.

  2013_09_11 /.

  2013_09_12 /.

  ASMCMD >

  Whereas the query on the view V$ ARCHIVED_LOG shows me the file names for the month of August as well.

  I don't know that I am misunderstanding/missing something. I'm lost :-(

  Please advise!

  Thanks in advance!

  You wrong understand archiving at the area of fast recovery works. You have done the fast recovery area to a certain destination and also set up check-in to the same physical location: but Oracle doesn't know that they are in the same place. You must explicitly set:

  ALTER system set log_archive_dest_1 is 'location = USE_DB_RECOVERY_FILE_DEST';.

  and then Oracle will understand and follow the space in the paper archive used against the db_recovery_file_dest_size.

  --

  John Watson

  Oracle Certified Master s/n

• VCP exam question - the difference between the file exchange and the swap partition?

  I am currently a student at my VCP and stumbled upon a question and was hoping someone could explain the answer offered.  Essentially the question is asking why you must manually create a local VMFS volume.  The possible answers were: files of storage for the service console log, decentralized storage for all the vmkernel vmkernel swap activity Exchange files for virtual machines that are configured locally and swap files from service console for the console service RAM overcommitment.

  It is my understanding that the swap partition has its own format.  When you create the necessary partitions for installing ESX format the swap partition is 'swap', not vmfs or ext - 3.  Then, because the last three options are to swap/activity files, I chose the first choice, storage for the service console logs.  This study guide says I'm wrong and the answer is VMKernel swap files for virtual machines that are configured locally.   Of course, Miss me something here...

  How you store Exchange files on VMFS partition?  I thought that the swap partition is the only place to have to Exchange files, and then it is on its own partition.  You cannot store a partition on a partition.

  Maybe it's the difference between a swap file and a swap partition which is tripping me?

  Search for, swap space as it is usually is a place to store a replica of memory the system for the purpose of managing memory better (usually data that are accessed most often).

  SWAP PARTITION is now, for the ESX SWAP space.

  And the EXCHANGE FILE is for some particular VM swap space that can be used by the guest operating system. The use of this file is managed by VMkernel. Now, this swap file has some different features from the windows of i.e normal swap, linux or ESX swap space space.

  NUTZ

  VCP 3.5

  (Preparation for VCP 4)