JSESSIONID missing header when using BES/MDS

Similar Questions

• pre-defined types of missing data when using a configuration file

  Hi all

  I recently installed Labview signal express 2011, including the audio wizard and vibrations. I got a file preset to implement the material I have but when I open the configuration file (a Labview project file) I get a message:

  Version of installed components are not compatible with the version of LabView express signal 2012. Please install the latest version of the following:

  "SV express datatypes.

  I do not have Labview signal express 2012 so I do not understand why this error pops up. I also have difficulties in locating the mentioned software

  Please notify

  Hi Yogev_sharvit,

  There is not a way to save the files to a previous version of the Sound and Vibration Assistant. I encourage you to contact SAGE, who was the source of the files, and whether they have a 2011 version available. Otherwise, it may be necessary to configure the steps in the wizard. I've included a screenshot of the file opened below. Unfortunately, this does not bring as much light on the different steps that we would.

• Connection stuck when connecting over BES/MDS

  I have an application called customer MC (later called 'client') who uses a socket connection to communicate with a server, the controller of Mobile (later called "controller").
  The connection is used to exchange information of signaling for control of calls, instant messaging and presence information and uses the SIP protocol.
  There are two ways how I can connect the Client to the controller:
  -Direct TCP (with a configured APN)
  -WIFI
  BES/MDS

  While the first two modes operate smooth we are facing problems with the connection on the SDM service method.

  The client uses the deviceside = false parameter to initialize the socket via the MDS Server connection.
  We did several tracks on the controller and the client and have the impression that the TCP stream is somehow blocked on the BES between the customer and the controller.

  Following things that we discover that day:
  -The TCP connection negotiation works very quickly. Handshake ACK SYN, SYNACK, is always quick.
  -The data channel itself seems to block / latency of data.
  Initially the application did not send data in decision-making, that data was sent to the origin of the side front controller. I worked around this by sending a single packet of data to the stream with data fictitious "\r\n" on the controller to the client directly after the establishment of the connection.
  In this way a steam machine is usable by the customer immediately, but after two messages flow seems to block again.

  I use Windows Server 2007 SP2 64-bit with a BlackBerry® Enterprise Server Express version and an SDM connection BlackBerry Service: 5.0.1.39

  Description of the scenario:
  [13:40:21.737] Client send data first Packet 'REGISTER'
  -Package is received the controller and responded with "401 Unauthorized" immediately after 15.8 msec (see trace packet)
  [13:40:25.619] Client receives the '401 Unauthorized '.
  -Package comes a little late, but still in time (after 3.8 seconds)
  [13:40:26.054] Client sends the REGISTRY with the authorization response
  -the second package never reaches the controller, the connection has expired

  The Server BES itself seems to be functional, since other applications like e-mail or the SSH of Rove client seem to work well.

  -Is it possible to influence the BES server how packages for a socket MDS connection are transferred? Is there a good way to solve the problems on the BES Server?
  I look in the newspapers, the more information I can find a connection is opened and closed again.

  Any tips?

  I finally found a solution for this.

  We have modified the client application to do a function flush() after writing in the stream object.

  Looks like there is a mayor unlike the behavior of the object of the steam of a plug.

  With direct TCP and WIFI all data are send immediately, whereas with the MDS connection all gots queued for the seconds until a flush() function is made.

  So remember: when using the socket via MDS connection allways drain when using the communication of critical data in time.

• Duplicate the header values in the report to Word when using Add array of report VI

  Hello

  I have a problem of duplication of the header when I use the Table add to Report.vi. I'm trying to generate a report to Word using a template, and I want to add a specific table in a good place with a bookmark.

  In parts attached: there is a screenshot of the VI and generate the result of the table in word.

  It's very strange because when I run the example in the table attached to the report everything works.

  http://forums.NI.com/T5/LabVIEW/report-generation-MS-Word-table-bug/TD-p/1605170

  http://digital.NI.com/public.nsf/allkb/4041ECB5D02BA57D862579A00002FE8D

• screen saver turns on when using FaceTime

  Since the update to MAC OS Sierra, I noticed that my screensaver activates when using FaceTime - most annoying because I have to quickly move the mouse to put it all again.

  He didn't get it until I've updated from El capitan, so I guess it's something to do with MacOS Sierra.

  He's not doing it with Youtube but I'm still trying with Skype.

  Screen saver works as it should do it with an ordinary application (for example, safari, etc.) Pages) if I don't move the mouse or keyboard for the specified time (five minutes).

  I do not have hot set of corners, the display is set on turn off (energy prefs is system) after 10 minutes. Screen saver is five minutes of inactivity.

  I have an iMac 27 "retina, first generation (a little less than two years) with i5 and 16 gig memory, standard graphics M290X.

  I missed easy adjustment here?

  I have it, feel also my parents as well.

• Satellite A300: missing letters when typing fast & noisy fan

  Hello

  I hope someone can help me.

  I've had this laptop for almost a year and slowly this is driving me crazy. I type very slowly and deliberately when you use IE.

  For some reason it doesn't pick up evey key STROKE. It is very well when using office however applications. It seems to be possibly related to the fan constantly on.

  Online games run slowly also.

  I bought an air duster can but not much came out of the box fan, so the solution suggests everyone is custody here for fan questions has not helped, the fan is still noisy and it took me ages to this type.

  Please help me!

  Andrea

  What plugins are you using IE? Some plugins/toolbars can drastically affect performance.

  Have you tested in FireFox or another browser? You can download FireFox here: http://www.getfirefox.com

  Have you installed Windows yourself? Or are you using the factory Windows installation?

  Maybe you are missing some drivers, for example, if you have not installed the correct graphics drivers, Windows will run in Mode VGA (software mode), which is very slow.
  Take a look in the device for driver issues Manager.

  It can also be caused by software installed. Perhaps you have two antivirus installed? Maybe you should try to back up your data and running recovery. Who would determine if it is a hardware or software problem.

  An update of the BIOS can also help. You can get the latest version of the BIOS on the Toshiba site in the support section.

• Static in speakers when using Skype

  I have a PC laptop HP Envy Touchsmart IS-j052nr, running Windows 8.1.  When I use Skype, either through headphones or the speakers, I have problems from parasites.  It sounds clear when I speak and when the person at the other end is speaking, but if the person on the other end does not speak for several minutes, then the static method noise becomes stronger and stronger (like a huge storm of rain falling at the hearing) until the other person makes a new sound.  The other person can also hear static.

  Is there a new driver, I can download to fix this problem?  When I scanned my computer on the support site there is no audio driver I was missing.

  Thank you!

  Hello SCLC.

  Welcome to the Forums of HP Support! I understand when you use Skype on your HP Envy Touchsmart j052nr IS running Windows 8.1 you hear static, whether you use headphones or speakers. Now you don't hear static noises when using Skype, or when using headphones or require sound from speakers?

  After some research on the Skype Support Forums, I've seen a few recommendations that I would like you to try to see if that reduces / removes this annoying static noise. Please follow the steps listed below:

  1 sign in to Skype

  2. go in Tooks > Options > General > Audio settings

  3 uncheck automatically adjust to the title of chapters of Microphone and speakers

  4. adjust the volume to your liking

  5 save and restart Skype

  If you are still having static noise, I wish that you continue here: Skype Audio issues troubleshooting

  Please reply back with the information requested, if the static noises are still there and it is only when you are using Skype, I recommend to go to the Page of Support of Skype as they would be able to help you.

  I'll watch for your reply.

  Source: www.skype.com/en

  Thank you

• Registration of a client device in a java application with BES/MDS

  Hi all

  I put this thread here that my application is a java application, but it could have also listed under the section development push as well.

  I have a part of my application that needs to connect to the BES to a certain company to receive push messages. The app works fine establishment of a listener and receiving thrusts by the MDS Simulator, and I also added more code to register the device with the BIS (BPA) from BIS example of Simon Hain.

  Initially I thought that the he had to register with the BES, just like how register us with the BIS except change some settings, as do not add an app ID etc. I have created a basic application of the Z10 push and remember that coding is the same for the BIS and BES except that the application ID and address BIS have been left blank. But now, after some research, I think with Blackberry 6/7, to onboard with a BES connection (unless a middleware program requires us to send some data onboarding) to receive a Push message, we just open a connector to the port number using the deviceside = false setting and wait for help to arrive.

  I looked on the net and forums to directly answer this question but can't seem to find one, that's why I'm asking here confirm.

  Quite simply, taking example of Simon for base, if I plug a client device to a BES (where the server application didn't need any onboarding of the device, its function is to, just send a message to the JSON style to the MDS with the device PIN to the device) would need to register the client with BES/MDS device, as Simon does with its function of registerWithBpas() to register with BIS/BPA , or could I just go directly to opening a connection to a port with the parameter; deviceside = attached false and wait for a Push message to arrive.

  Of course the devic has already been saved in the BES with its ID, e-mail address of the person using this device, etc.

  Simon if you get a chance to personally respond to it, that would be great!

  Thank you all for your time and your help.

  Rob

  Do not enter the unit, simply push the spindle for the MDS and push message will appear on the device.  As you rightly point out, the device is already on the BES and must use the MDS to access the internet in any case.

• Behavior of the account profile to prompt when using Windows 7 to connect to a Small Business SERVER 2003 domain

  I just got a complaint from someone saying that the guest account takes more time and more time to log the area.

  We have a number of XP machines and a couple of Windows 7 machines at the reception (to give the impression that we are a company thinging before - you know the kind).  In any case, everything is controlled by a Small Business SERVER 2003 for the integration of Windows 7 machines is that a bit of a botch as well as group policy is concerned.

  The fact is that in my diagnosis, I noticed that the guest account is only given a temporary profile whenever someone connects to use it (it is used for the interviewed work if they need Internet access for some reason any).  Thus, the profile is deleted from the registry and comments folder is removed from C; \Users as soon as they log off.  This was brought to the head when I tried to add a printer to the guest account and could not see all of the printers listed in the AD.

  Is this a normal behavior, or does all the weird sounds you?  It also works with XP in this way?

  Thanks for any input and comments.

  Angus

  Hi siham,.

  Welcome to the Microsoft community.

  I suggest you to report the issue to the TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

   

  Thank you.

• Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

  Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

  Hi Axe_Juan,

  Could you please let me know the version of Photoshop installed on your computer?

  Also you want to State as Photoshop not to do a quick selection?

  If so, then head over to the Photoshop preferences, then the performance tab and click on 'Big and flat', restart Photoshop and then use the selection tool.

  If something else, please let me know.

  Kind regards

  Tanuj

• Failback when using Etherchannel and FCoE

  I have an environment that I am able to dig in for the purposes of learning, but I can't it.  Since I can't make any changes to the environment and experience, I wanted to ask a few questions here.  I'm trying to figure out what that the failback option of virtual exchanges must be defined on when using FCoE and etherchannel.

  The environment consists of:

  • FCoE
  • 2 cards of CNA
  • EtherChannel
  • vPLEX
  • Cluster of metro
  • Nexus 5000

  
  Each host connects to a single vDS and each portgroup is configured to use:

  • Load balance policy: route based on the hash of the IP
  • Active uplinks: two 10 GbE CNAs
  • Eve & uplinks used: no
  • Physical switch is configured for etherchannel.

  
  

  The vSphere networking 5.5 guide says the following for failback on vDS trade option:

  
  

  Failback Select Yes or no to disable or enable failback. This option determines how a physical card is returned to active duty after recovering from a failure. If failback is set to Yes (the default), the adapter is returned to active duty as soon as their recovery, moving the daughtercard, which resumed its accommodation, as appropriate. If failback is set to no, an adapter failing has been idle even after the recovery until another active adapter fails, requiring a replacement.

  
  

  This evokes the assets & Eve links and since using etherchannel requires that all active links with no standby connection, this means that the restore option does not apply to etherchannel configurations?  Or applies to the way in which the load is re -distributed when a link comes back after having been conducted? 

  
  

  For example, that we have a portgroup with two uplinks (uplink1 & uplink2), load balancing policy, the hash value of the IP and physical switch ports are in an etherchannel configuration.  During the normal operation of the IP of the hash calculations (http://blogs.vmware.com/kb/2013/03/troubleshooting-network-teaming-problems-with-ip-hash.html) are made and the load is distributed across the two uplinks.  Let's say the physical switch that connects uplink2 in goes down.  The ESXi hosts connected to that vDS immediately come into uplink2 equation which means uplink1 would only result in the calculation of hash IP?  What is the impact of the automatic restore option when uplink2 is back?  If failback is set to no, uplink2 still wouldn't be in the equation?  If so, how you would get it back in the equation?  Or when the link is up is immediately shot down there regardless of the restore option?  It feels like I'm missing something here. 

  Also, I read that attributing no failback is recommended when using IP storage, because it can lead to port heartbeat that can cause performance issues with the storage.  But I also read that traffic to an etherchannel appears as a single MAC/connection address.  This recommendation apply in an etherchannel configuration?  Are port and MAC stir the same thing?  Or is beating port just at the moment where the link goes up and down and MAC beat is when the MAC's switch between two ports?

  Sorry if these are fundamental questions, but not being a networking guy and not being is not able to experiment makes it hard.  Thanks for any help.

  The Member State of the binding not arise unless the link is established on both sides.

  I agree with the statement portfast. All the links go to an ESXi server do not participate in spanning tree protocols. The goal is to transition to a State of transfer immediately on the link turning upward. This must be paid regardless of the use of an OFFSET.

  LACP will dynamically build the GAL and validate the configuration on both sides is correct. I prefer LACP (dynamic LAG) on any static sort of LAG, but this requires a switch on the side of vSphere distributed. If you have the VDS, using LACP. However, LACP does not solve the problem of covering tree (you still want to avoid using tree covering weight on the SHIFT going the ESXi host).

• How to manage the photos Lightroom when using 2 computers, keeping any changes made on one or the other?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  Is the big question, where I want to especially a conclusive answer:  How to manage the photos Lightroom when using 2 computers, keeping all the changes made on one of them, using the same photos for editing. I'm not going to use DNG. Details: I mainly use my old MacBook Pro, but I wish I could use my PC as it is much better (card: i5 2500K, 16 GB of RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HD that I could use, one for backup and one for the actual Photos/changes. I you will probably need to use as my internal HDs are fairly complete and I cannot be the kind of things simply delete or move to one (developer, without loss of music, programs etc.).

  On this basis, how do I save all such Photos folder (pictures and retouching and preferably presets too)?

  According to me, that it should be possible to work cross-platform without having to create a link to the files each time, or without having to keep export/import of the catalog, keeping the single catalog and the picture library on an external drive that is then switched between systems as needed.

  Obvious first requirement is an external drive that is formatted in a way (for example, FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalogue AND folder parent si le catalogue ET le dossier parent images are both set to the same level in a global parent folder, then it should be possible to take advatage of ability of Lightroom to use relative paths instead of absolute paths to detect the images, no matter if the player is named (Mac) or lettering (PC). This is how "export as catalog of ' works, that is, it creates a 'package', alias a parent folder, containing the catalog and a replica of the folder hierarchy to exported along with the catalog images. Take this 'package' to another system (same OS or not) and "it works" even if the drive letter is different or the operating system is different... because the relative path of the image catalogue is always the same.

  I have not tested this cross-platform (if I have between various PC systems with letters of different readers) so for me it's still just a theory, but there may be others who have done this successfully.

• Why can I never get a good picture on my imac when using Skype?

  Why can I never get a good picture on my imac when using Skype?

  I use the free Skype to talk to my friend in China every week. They always see me on their computer or phone clearly, but I can never get a good video of them, clues why? I see a good image of myself, but never of them. I can't adjust the settings of the built-in camera because they are fixed. Is this my router modem, which is 8 years old now. What is causing this problem. If you look on YouTube there are hundreds and thousands of good quality webcam videos then why am I having this eternal problem year after year? I've got El Capitan OSX

  If they can see you clearly, the problem is not on your side - at least not in your Mac. Could be the router or you internet connection. Otherwise: https://support.skype.com/en/skype/mac/

• When using on the part of the family can they others besides Organizer individual payments?

  When using on the part of the family can others besides the Organizer make individual payments without using the card of the organizers?

  Family sharing makes it easy for up to 6 people in your family share each other iBooks, iTunes and App Store purchases without sharing accounts.

  "Pay for purchases with the same credit card families and approve kids' expenses directly from the device of a parent." And share photos, a family calendar and more to help keep everyone connected. »

  Implement the family sharing - Apple Support

• Where do I put the AutoFill feature when using Firefox?

  You people do a great job of describing 'How to use Auto Fill'... but nowhere in this article does say WHERE - to implement the feature when using Firefox.

  How and where can I find the setting?

  Thank you.

  PS: maybe that should be in the article somewhere.

  What about filling the data in a form (input field) on a web page?

  See:

  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": "don't forget to search and form history."
  • https://support.Mozilla.org/KB/form+AutoComplete