judge test pass or fail outcome

Similar Questions

• Pass and fail indicator chart

  Hi all

  I have a table of pass and fail, and I want to do a graphical indicator to represent this table.  Is this an indicator bar that would take an array of pass/fail and show them as green and red on the bar.  The color on the bar must be continuous.  I want just an indicator that normally told me the % of failure in real time.

  Yik

  
  

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any mention of this code error or failure anywhere

  My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any reference to this error code or failure anywhere, either in the "help", on Microsoft Support sites, or on the community boards.

  I have updated all drivers for this graphics card (AMD Radeon HD series 7900) and all the surrounding drivers with the AMD software.

  I can't find any information, so I don't know if I should get a new video card (which seems to work very well) or if I should just ignore it.

  Someone at - it ideas?

  Raven

  Computer Alienware Aurora R4
  Windows 7 x 64 OS
  AMD Radeon HD series 7900 graphics card

  Original title: Error Code WVC07-LB8

  Hello

  As you mentioned that you have already updated the AMD graphics card drivers, could you let us know if you see any exclaimation or any error in the device under graphics card Manager?

  Are you facing any problem with your graphics card, video, or your screen resolution?

  As Alien Autopsy Global System Tests showed you the error, I suggest you to get tap dell JDM for more support asiistance if you have any problem with Yon graphics/video card or screen resolution.

  For your information: once you uninstall your graphics card drivers, windows has its own built-in drivers that will automatically charge the generic drivers. If in case it does not load you can search the hardware changes, this will probably load the generic drivers.

• 'Pass' or 'Fail', based on another field?

  Enter this script so a field (field1) enters the 'success' or 'Failure' as a number of Field2 is < 2 or > 1? Can I get into this as a custom in Field1 calculation?

  You need to give more information on exactly when you want to 'Pass' or 'Fail' to display.

  If you want to display "Pass" If the value is > 2 and 'Fail' if it is< 1,="" try="">

  For Text1 custom calculation script

  var F1 = this.getField("Text1").value;

  var F2 = this.getField("Text2").value;

  Do Text1 white if Text2 is > 1 and< 2="" or="" is="">

  If (((f2 > 1) & (f2))< 2))="" ||="" (f2="">

  F1 = « » ;

  }

  Pass if Text1 Text2 > 2

  ElseIf (f2 > 2) {}

  F1 = "Pass";

  }

  Do Text1 fail if Text2<>

  ElseIf (f2<>

  F1 = "Fail";

  }

  Display result in Text1

  Event.Value = f1

  You need to replace 'Text1' and 'Text2' with the names of the fields in your form.

• I have a Pavilion dv6. The test of hard drive reads: SMART Long DST passed, short DST passed, and failed.

  I have a HP Pavilion DV6 and it will DISPLAY, allow me to connect, and then reading welcome with the busy symbol, then the screen goes black.  My pointer always recognizes the touchpad and moves accordingly.  I've performed memory tests and received the following errors

  Failure ID: PU56W2-5KL62G-XD0141-61F103

  Product ID: LK469UA #ABA

  Hard drive 1

  Test drive: FAILURE

  It comes after the memory test, said this lower slot 2 failed.  I don't know what happened, but I want to be sure, I replace the components just before that I'm going to spend a lot of $.  All the tips are greatly appreciated.

  The hard drive LK469UA ID is used in the HP PAVILION DV6-3236NR NB PC US

  Assuming this DV6 is an American product, it's DV6-3236NR specifications

  There's an alert about the products of hardware for the DV6-3236NR, for the SATA (Serial ATA) hard drive controller here.

  "... Serial - ATA (SATA) ports in chipsets can degrade over time, that may affect the performance or functionality of the SATA-related devices such as disks, hard and DVD players. »

  The problem with models sold by little close before March 2011, including "fourth to sixth digit of the serial number are digitally"107"or less" effects AND where ' is the name of the chipset in the Device Manager... ".  "Intel (R) 6 series/C200 Series Chipset Family.    There are other caveats.  Not all of these DV6 have been affected.  HP and can still have a replacement

  "If you have an HP computer with the affected chipset, HP recommends that you contact HP support for service solution-join and receive the update free of charge for you."

  See the link above for more details.  We will this rule first and then move on.

• HP G62: DST short test system Diagnostics failed HP G62

  Hello.

  Windows 7 x 64 SP1

  I managed the system diagnosis HP test that you can access during startup by pressing ESC. The computer passes the test of memory and disk hard test but failed the test at startup and testing of tune-up with the same error:

  DST short failed

  Failure ID: 9LNF9R-50881W-XD014J-60QG03
  Product ID: XF522EA #AB9

  What does that mean?

  Thank you for your time and your help.

  Hello

  It really sounds like the HARD drive starts to fail, then it would probably be better to replace it before installing Windows 10.

  The only other option that might be interesting to try would be to zero the drive then reinstall the original OS and see if you still get the uefi diagnostic errors.

  You have your media recovery (disks or USB key) to be able to reinstall Windows 7?

  Kind regards

  DP - K

• Test system update fails on ORA-01113: file 1 needs media recovery

  I use Oracle 9.2.0.6 on HP - UX (B.11.11)
  
  I'm refreshing to a test of production on the same server system.
  
  The update fails on...
  
  ALTER DATABASE OPEN RESETLOGS;
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / elltest/system/system_01.dbf'
  
  
  I do mainly:
  -Place prod tablespaces in backup mode
  -Copy the files from production to test directories
  -Take prod tablespaces out of backup mode
  -pass the prod (once for each newspaper group) log files
  -copy files from archive prod to test
  
  STARTUP NOMOUNT
  
  Create control file from a copy of the prod trace file
  (CREATE CONTROLFILE REUSE SET DATABASE 'ELLTEST' RESETLOGS ARCHIVELOG)
  It works
  
  RECOVER DATABASE USING BACKUP CONTROLFILE
  -J' I grab the last log archive copied during production.
  
  ALTER DATABASE OPEN RESETLOGS;
  ERROR on line 1:
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / elltest/system/system_01.dbf'
  
  I think I have I have all required log archiving prod?
  
  Any advice?

  What you're trying to do is an incomplete recovery of the database. Since the redo logs are not used in your recovery you must explicitly specify the time to stop. If you do not process assumes a complete recovery and will require a request for reinstatement of online recovery log data that you do not.
  You can use UNDO based recovery with
  RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROL FILE;
  then type CANCEL after the last active log has been applied.
  Open with option RESETLOG database. It should work.

• DAQ self-test passed - peripheral does not.

  Hi, I have problems with a configuration PCI-6115/BNC-2110. The PCI card passes the self-test. And the NLC has all static tensions (for example, the constant 5V terminal is to turn off 5V and the power light is on).

  Yet, I can't control any of my devices via the analog output.

  How reliable is the test? Could there be a problem with the card that allow me to change the voltages at the terminals, but always to provide constant power to the box? And also be able to pass the test?

  I tried this set upward on both computers. The number of the device is in the Device Manager and moving and Automation Explorer. But I can't control my devices yet. I was hesitant to consider hardware problems given that the PCI card has passed the test and the BNC box is powered. But I don't see anything else that I can edit on the computer to make the camera provide the correct tension.

  If we measure the output of terminals, there is a very small change in voltage (0, 05 - 0.10V), but not the 5V that we need.

  Does anyone have any suggestions?

  -Matt

  A neighbor of mine did a PCI-6229 he left me borrrow. This completely solves the problem. Apparently, good results in the self test and the power of the box of the BNC is not a mark of DAQ devices work properly.

  Thanks for the help!

• ProBook 4310 s: drive hard test 1 (fast) failed

  hardisk 1 (fast) test failed, but still can start the windown 7. Wireless can not auto detected

  The hard drive is faulty and must be replaced. Sometimes it will start for a while - but you will get random errors. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• test memory Windows failed

  memory test failed for windows

  Then?

  The sticks of memory have failed or you have another hardware problem with your motherboard

• (Redirected) OPU - Pin failed - failed TEST = Dell/Alienware failed

  Received my X 51 last night, unpacked and starts but the CD player was dead.

  No problem, go run some Diagnostics online and get the following message:

  DVD - RW drive - HL-DT-ST DVD + - RW GA50N OPU Test failed

  DVD - RW drive - HL-DT-ST DVD + - RW GA50N pin Test failed

  All good systems.

  Call technical support, they walk me through the F12 boot test result, even dead DVD player.

  Their apparent solution is to send a technician to replace the DVD drive in a computer dating an hour with parts refurbished.  The DVD drive never worked.

  This is an unacceptable solution to what I think is a relatively simple problem.

  Dell has dropped the ball on this and will get the computer if a fairer solution does not materialize.

   

  Better to post this thread in the Customer Care Forum here:

  http://en.community.Dell.com/support-forums/customercare/f/4674.aspx

  Bev.

• Test connection CSV fails

  Hi guys, just checked this morning and discovered all our sources of the csv connector fail when I test the source. It returns "specified CSV file does not exist.

  I've seen solutions here:

  VMware KB: Attempt to connect to the CSV connector causes error: there is no such thing as CSV file

  VMware KB: Test connector CSV on Windows Server 2008 fails with the error: Test failed. Please consult the eve of the server...

  Problem is that I can't follow the steps. Help, please. It is said "right-click on each file you want to unlock, and then click on Properties.»

  What I have to do this in the Manager services IIS? Or a simple Explorer will do? How can I know whether or not the files are really blocked?

  

  BTW, we use v9.1.4.

  Thank you very much!

  It comes to me this morning that I have not tried to enter another path in a source to verify if it successfully tests the csv file. Tried some time ago and thought that the problem is isolated to the folder we usually put the csv files. Totally forgot that I have shared this folder for easy access and limited to mea and many others. "Everyone" with read only access and voila, I added, all sources are working again!

  Thank you!

• test drive has failed-303

  I have a laptop HP 15 months and longer warranty. It evokes the launch repair mode or start windows normally option and the two options just hang there even after their execution for nearly 5 hours. When I run diagnostics using F10 it fails with ' disk hard failure 303.  I tried to back up files by using the F11 option, but it doesn't let me do.

  Any help is appreciated.

  Hello

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins Page 55 of your maintenance & Service Guide.

  Once this is done, you will need to use your recovery DVD to reinstall the operating system on the new drive.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  

  Kind regards

  DP - K

• IMAQ Low pass filter failed with invalid image border.

  Hi Expert,

  I'm trying to use the imaqLowPass function. I expect that the input image would have been handled by the low pass filter.

  But it is a runtime error showed 'invalid image border.

  Can someone tell me what is happening?

  Problem solved.

  I add a border to the image.

  He must take care of the size of the border and the size of the filter.