Just installed Windows 7 Pro on two new computers is based, can't do anything. Please answer.

Similar Questions

• Can I install Windows 8 Pro in ' two computers?

  I got my Windows 8 Pro in the mail today.  I installed it successfully in my PC.  Can I use it again to install it in another computer?

  Do you mean that upgrade you?

  No One key can only be used on the same PC.

• I just installed Windows XP and lost my product key. Where can I get another?

  product key

  I've just loaded my xp disk and I lost my product key can I get another

  Hi Alexvamvas

  You can call the support technique microsoft and tell them the problem, they will find you a likely solution
  For more information: http://support.microsoft.com/contactus/
  Thank you
  Ashok
  msft

• After installing windows XP Pro my computer does not start correctly

  After you have installed Windows XP Pro on my HP Pavilion (updated to XP home), my computer will not end the restart process.  I have repeatedly in a loop once the blue screen with the HP logo.  When this has happened before after installing a pack of updates for XP Home, we just started in safe mode and then had it will restart at an earlier time, thus eliminating the updates.  However, now when I try to start in safe mode, I get an error message that says: "Windows Setup cannot start in safe mode" and I leave safe mode.  We hoped that by installing Windows XP Pro, this problem should go away.  Can anyone help?  I have read several other entries in the forum for similar problems, but they all have to do with updates.  This is the first time I was not able to use safe mode, so now I'm stuck.  I hope that I can avoid having to perform a full system recovery, since it is a long involved process and having once before, I always felt the same restart problems after installing updates.

  PA bear,

  Thank you for help... After reading several posts in the forum, one of them reminded people to check with the manufacturer of the computer so that possible solutions... and this is the solution here, I wish I thought of him earlier... I did a system recovery to remove the Windows HP Pro and return to the original version of the default value.  Then I went to the HP site and downloaded the patch according to their directions.  Problems fixed! :-)

  Any PERSON HAVING HARD REBOOT YOUR HP PAVILION (with an AMD processor) after you install Windows XP service pack 2 or 3 updates:

  HP has a patch that solved all my problems.  Clearly, service packs contain information for Intel processors that is in conflict with AMD processors in many HP Pavilion desktop computers.  You can go to their customer service solutions website and download the patch.  Since I did it, I had no other problems. I wish just that I had discovered the solution until I had to do a full system recovery.

  If your computer hangs on reboot 'loop', see if this info. HP will help you:

  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  If you have had problems with XP updates, including service pack 2 or 3, try this page:

  Before you install Windows XP service pack 3

  Please pass on to other similar issues.

• installation of Windows 7 pro to the new motherboard

  my old motherboard 7 years was broken, I can install windows 7 pro on my new assembled desktop computer or do I need another license?

  Only if it is a retail license. If it is preinstalled with the previous card of mother no. You may need to perform the activation of the phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How to install windows 7 pro, when I mistakenly installed the 32-bit version instead of the 64-bit version

  I just installed windows 7 pro.  Unfortunately, by mistake I installed the 32-bit program on 64-bit program.  now that I try to install the 64-bit, I get the error message: "this installation disc is not compatible with your version of windows.  upgrade I need the disk to correct installation.  so he said to shut down your computer and reboot the installation disc. »

  but when I reboot it just goes directly to the office.  would someone kindly give advice on how I overcame this misadventure?  I know that windows 7 pro on my computer, 32-bit version, but want windows 7 pro 64-bit version.  I still have the discs and software keys... Thank you.
  Prior to this installation, I was running 32 bit XP pro

  You'll need during cratch because there is no way to upgrade a 32 bit OS to a 64-bit version of Windows.

  Check your BIOS to make sure that your DVD drive is set as the first boot device, and then save your settings (if a change was required) and get out.

  With the 64-bit DVD in the DVD drive, restart the computer.

  Choose the "Custom" option and then delete the existing system and Windows partitions, click next to continue the installation,

  Since you enabled the OS using the 32-bit product key most likely you need to activate by phone this time.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• Installed Windows 10 Pro. Photoshop CC 2015 crashes now.

  I just installed Windows 10 Pro. Whenever I try to start Photoshop CC 2015 it crashes just as soon as it opens. How can I fix it?

  go to administrative tools / event viewer/windows logs/application

  find the log of the crash of the Psalm

  Copy it and post here.

  Jim

• I have an Optiplex GX620, with windows XP Home edition, I can install windows XP PRO top?

  I have a virus that it needs formatting to remove. The pc running wondows xp home edition I can install windows XP PRO on it?

  Yes you can, but why?

• I just installed Windows 7 on a PC that I just built. Being new to Windows 7 I started to play around him and did not find any games at all. Does anyone know how to fix this?

  I just installed Windows 7 on a PC that I just built.  Being new to Windows 7 I started to play around him and did not find any games at all.  Does anyone know how to fix this?

  Salvation Ita; tribal

  Congratulations on a newly built Windows 7 computer. Selected games may not be that is the reason why you are unable to find all the games on the computer.

  Follow the steps to turn on the games feature.

  1. click on start.
  2. type optionalfeatures.exe in start search.
  3. place a checkmark for the games.
  4. click on OK.

  After the computer has been restarted, check if you can play games on your computer.

  See the article: features on or off Windows activate: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers Feedback Forum and tell us what you think.
  

• New hard drive, installed Windows XP PRO version 2002 - resolution screen and internet problems

  My Dell has had some problems (patially due to age), so a buddy of mine and I put a new hard drive in it and then installed windows XP Pro.  Installation went great, but now that it's installed, I can not get the screen resoultion to change and I can't connect to the internet.  I feel like with the internet, can I have a driver problem.  I know that the internet works, I'm on it with the laptop right now.  Any suggestions?

  ????  I'm not sure I understand your question. You download the drivers to a place, you will find them, as the office. If you want to put them on a USB stick, copy the files downloaded to the key and take it to the computer target. Copy the files on the computer desktop. Double-click on a file and it will unpack the installation routine starts. Follow the installation wizard. Reset when said to repeat as needed until all the drivers, etc are installed. Subsequently, you can delete the downloaded files from Dell (from installation .exe). MS - MVP - Elephant Boy computers - don't panic!

• New just installed Windows Vista, unable to connect to wireless networks

  So a few months ago my laptop (HP Pavilion dv6) fell from my bed and the hard drive was messed up, so I'm a computer geek friend to replace my hard drive and put a new operating system on it, he had no activation key. In any case, after I came back it was working fine and I was able to use the internet by connecting to public networks, but every time I would connect to my computer it asked me to activate it. And finally I got so bored with being bugged that I decided to buy a new product key, so that he'd stop bugging me. So I bought a new Windows Vista Home premium operating system and when I received it in the mail, I installed correctly and put in the product key and active it and all that much good but whenever I try to connect to the internet that it says "Windows cannot find wireless networks" and when I click on "Diagnose this problem" he says "this computer does not have an install_ adapter of» configured wireless network. and then it gives me options troubleshooting that brings me at all because most of them consist in some way to update my drivers online, but I can't online my laptop to update! and all the other solutions are just confused. Is there a reason why my "driver" would stop working AFTER you install Windows Vista? Or is there some way I can uninstall the operating system and just use the one I had before? Help please!

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• I just installed Windows 7 on a part of the Dell Vostro 1500, l features notebook.__In control, I have two mistakes "Device Base system has not a driver" __There is no driver installed for the Base system device. _ No fixed

  I just installed Windows 7 on a Dell Vostro 1500 laptop.
  In the pane control, devices of l, I have two errors "device Base system has not a pilot.
  There is no driver installed for the Base system device. Not fixed
  Apply the solution to the complete driver problem
  Install a driver for this device does not work

  Troubleshooting gives me two messages:
  The first is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0592 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0BF0
  Error code: 28
  The second is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0843 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0AF0
  Error code: 28
  I cannot locate a driver through web search - how do I know what are the devices? and where can I find a driver?

  Try to update the drivers using Windows Update.  If this does not work, try the versions of Vista of Intel and Ricoh under Chipset drivers on the website of downloads & drivers for Vostro Notebook 1500 . Make a restore point first.

• 17 - e049wm will not install Windows 8 Pro

  So I got this machine of killer, upgraded to a new SSD and tried to install windows 8 PRO. Windows loaded fine, but it only installed Windows 8 regularly.

  Now here's the base line. Ive tried to install 5 different times, all with the same result.

  1: install boot disk

  2nd: post installation upgrade

  3rd: enabled Legacy support in the BIOS and I tried the new facility

  4th:upgrade post install with active legacy

  5th: disabled Legacy and set up fees.

  Another weird, that I should mention is the fact that he never ask me in setting up my license key. As soon as I check my activation it says that windows is activated, the product ID that ends in AAOEM.

  If this machine, wise, the bios is processing my drive of retail as an OEM disc and pre activating Windows 8 PRO, yet do not allow me to install the professional edition. I tried 2 Windows 8 PRO 64 bit retail of different disks without success.

  Even so much as ive tried the link "Get more features with a new edition of windows" and provided BOTH of my keys not activated without success, since it is reg 8 Win which installs

  IM advanced technology so feel free to talk tech to me. If it is not able to do I wouild like HP to provide me with the Windows 8 PRO for my model, just the OS disk without indigestion.

  Hello

  My suggestion: use Windows 8 Pro upgrade DVD otherwise you must call HP to erase the firmware as shown in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/bipass-UEFI-provided-product-key-to-install/a271067b-D655-4b46-8B52-b3f191b9370c

  Kind regards.

• How to put windows 7 pro on the new computer using the same key on the side of the other computer

  I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.

  Original title: Windows 7 pro

  Tuesday, October 14, 2014 20:31:20 + 0000, 4hammond wrote:

  I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.

  You can not, for at least one (and two possible) reasons.

  1. it isn't clean if you want to have two computers, or you
  you want to remove from the old computer and put it on the new. If
  you want once, you can't do that - the rule is very clear: there
  a copy (or a license) for each computer.

  There is nothing new here. This is exactly the same rule that has been in
  effect on all versions of Windows from at least with Windows 3.1.

  2. but even if you want it on a single and from uninstall
  the old computer, you can't do it. It is because if it came with the
  computer, it is an OEM version and the biggest drawback to he a
  OEM version, is that its license it permanently binds to the first
  It is installed on the computer. He can never legally be moved to another
  computer, sold or assigned (except with the original computer).

• reinstalled Windows XP Pro on the new HARD disk, not invited to key code

  My Dimension 9200 needed a new HARD drive. Ordered from Dell, installed HD then re-installed Windows XP Pro sp2. I forgot to unplug the media reader, so I had to reinstall it again to get HARD drive letter assignment as C. Added drivers in good condition and just download and install sp3 and all the necessary updates. Now, all that remains is to transfer all the files from the old HD.

  Never, I was invited to the WinXP key code. I DO have the Dell OEM disc as well as the installation key code in the original Dell factory. I was wondering if anyone else had the same "problem". I checked under administrative tools and don't see anything that ask you "activation". The only thing that I went off and was invited to provide was the key code when I installed MS Office 2003. When I check in system properties, General, it shows that it is registered to me and some numbers with Dell OEM then more numbers, not the OS key code well.

  Anyone can shed some light on this? Thank you

  When you use a Dell OEM media on a Dell computer, it checks the BIOS to make sure that it is install on a Dell computer, then it will be activated automatically, using a generic OEM key.  As long as you have the sticker COST/License/Product Key, you have the right to run Windows on this computer.  That's pretty standard for OEM systems.

  System properties still shows a 'code', not the actual key.  You can use Magic Jelly Bean to retrieve the key used to activate Windows, but the key, that he will return does not match your COA and cannot be used for manual activation.