Just unloading scheda su wireles pc

Ho ho più scheda wireless o he pilot giusto, como posso download?

Hello

See this page to select your language:

http://support.Microsoft.com/common/international.aspx

====================================

Or sorry that it is area English.

Left click at the bottom of the Microsoft Community page

English and set your language.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • HP 640 G1 Notebook - no way to disable the touchpad

    Hey all,.

    Sorry if this is in the wrong place, at this point I'm not sure if its hardware or software.

    Installation program:
    Computer: Laptop HP G1 640
    OS: Windows Professional x 64
    With the help of HP image: No.

    Description of the problem: First of all both plugged in at the mouse and touchpad works. I would like to disable the touchpad when typing. According to research Google and HP support the tablet should be disabled and enabled by the double tapping in the left hand top winder on cone of the touchpad. It does not work.

    Diagnostics: So far I have updated the BIOS to 01.05. The firmware update entered ME Intel Management Engine () Firmware component 9.0.22.1467. These 2 were under the direction of the HP support.

    Uninstalled and reinstalled the driver for the Synaptics TouchPad (International). I tried the 17.0.18.23 and the 17.0.18.17. These two fail with the following error below

    Note:

    • After that I uninstalled and reinstall the Synaptics application does not return to the Add Remove Programs list.
    • In the Device Manager does not list the touchpad in the mouse and other pointing devices.
    • I refused HPs offers to have the touchpad replaced as it's not just 1 machine, its all 20 of them. It also works very well during normal use.

    Any construtive help is appeciated.

    I discovered it. Ended up being our antivirus prevents installation. I use Trend Micro Office scan.

    I did a test not just unload the application that I uninstalled because I need to be updated in all cases.

  • HP Mini 110-3529TU: driver WLAN install HP Mini 110-3529TU

    Hello all, basically I have the same problem like this thread here:

    http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/WLAN-driver-won-t-install-HP-14-d003tx...

    Installed my laptop a new Windows 7 Ultimate 64 bit, I searched the internet for the drivers of my laptop and installed everything fine except for the wireless lan driver. When I installed the WLAN driver just unload its contents and continued the installation... I went to the folder click on Setup.exe or Install.exe but the Installshield cannot continue and will not be finished (installation of green thingy) loading, command prompt will suddenly pops out and close and yet once and just nothing happens...

    Regarding my computer laptop controller hardware id network, heres 4 lines:

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280

    Hello:

    You need this driver...

    This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

    File name: sp57965.exe

  • Need information about dataguard / stream for our scenerio!

    Hello

    We have an application with Oracle 11 g (he calls as box 1), the day-to-day operations of form currently apart load that we have, there are two or three other apps also considered tapping/approach of our primary database (box 1) that puts a lot of load on the Pb and the server. I've done a few go - ogle and found that data guard or water courses can come handy also to lower the load through box 2 dB pending... So I think I have a standby server either box 2 that will meet all reporting requirements and primary will just play a role of data entry & req little statement.

    So my question to you guys is:

    (1) assuming I want to just unload some server load in box 2 in effect considered, is an option to fetch DataGuard. If Yes, then what I have to go with physical or logical standby standby assuming that our database awaiting will be just right for having reported the end or in other words all the reports of applications such as data warehouse wil approaching standby db?

    2) given that I understood the watercourse is very convenient if I want to have more control over what is shipped in box 2 as an update, as you much finer granule setting i.e. level table, etc. level collar. Since we have always have full db in sync, stream be not useful in our case, the right?


    -Learner

    Hello

    Here, two things are different) 1 standby) 2 flow, obviously related to replication

    From 11 g, you can use physical standby for payment purposes, this means select statements will work i.e. you can say read-only data recovery also will be activated too.

    In this process, users who perform operations only in read-only , no operation of inserts/updates / removal is permitted.

    In streams, it works on heterogeneous platforms, you can perform the data replication, which can be also some objects or diagram, complete database. There will be a lot of addiction too.

    To SYNCHRONIZE the two databases that you can fetch the data keep that only comes with the cost of the Enterprise edition. Mode standby is exactly the mirror copy.

    HTH

  • FMS is clear how the live stream?

    1.jpgThis data flow can not be deleted

    Hello

    To clear the stream, just unload the application in the administration console.

  • just a home end 2015 27 in. i7 (panic Reports)

    So I just got this House yesterday 18:00 pst now 02:32 and I want to know what is happening. I have add ram now there 24 concerts


    Photo of my http://imgur.com/hXufNqp ram is that correct?


    thought maybe a ram issue or something?


    Model name: iMac

    Model identifier: iMac17, 1

    Processor name: Intel Core i7

    Processor speed: 4 GHz

    Number of processors: 1

    Total number of Cores: 4

    (By heart) L2 Cache: 256 KB

    L3 Cache: 8 MB

    Memory: 24 GB

    Boot ROM version: IM171.0105.B05

    Version of the SCM (System): 2.34f2

    Serial number (System):

    Material UUID: 03BDAA43-8497-513C-B7CE-03EC9B51F056





    Anonymous UUID:

    Mar 9 February 20:04:17 2016

    Panic report *.

    panic (cpu 0 0xffffff80157d6bba appellant): Kernel trap at 0xffffff7f9793d68f, type 14 = page fault, registers:

    CR0: 0X000000008001003B, CR2: 0 X 0000000000000001, CR3: 0X0000000019B9A000 CR4: 0X00000000003627E0

    RAX: 0XFFFFFF80496AEC00, RBX: 0X000000000000000D RCX: 0 X 0000000000000000, RDX: 0000000000000008 0 X

    RER: 0XFFFFFF92EBA6BA70, RBP: 0XFFFFFF92EBA6BA70, IHR: 0X000000000000000D, RDI: 0 X 0000000000000001

    R8: 0XFFFFFF92EBA6BAA0, R9: 0 X 0000000000000040, R10: 0 X 0000000000000000, R11: 0X000000000000000B

    R12: 0XFFFFFF8049697800, R13: 0 X 0000000000000031, R14: 0 X 0000000000000000, R15: 0XFFFFFF80496AEC00

    RFL: 0 X 0000000000010202, RIP: 0XFFFFFF7F9793D68F, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

    Lack of CR2: 0 x 0000000000000001, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 0

    Backtrace (CPU 0), frame: return address

    0xffffff92eba6b700: 0xffffff80156e5307

    0xffffff92eba6b780: 0xffffff80157d6bba

    0xffffff92eba6b960: 0xffffff80157f4313

    0xffffff92eba6b980: 0xffffff7f9793d68f

    0xffffff92eba6ba70: 0xffffff7f9794d286

    0xffffff92eba6bad0: 0xffffff7f96258c32

    0xffffff92eba6bb70: 0xffffff7f96257607

    0xffffff92eba6bbb0: 0xffffff7f9795d9b0

    0xffffff92eba6bd10: 0xffffff7f964c9117

    0xffffff92eba6bd50: 0xffffff7f964161ad

    0xffffff92eba6bd80: 0xffffff7f96416251

    0xffffff92eba6bd90: 0xffffff7f9641077c

    0xffffff92eba6bdd0: 0xffffff7f96410653

    0xffffff92eba6be10: 0xffffff7f96431d1f

    0xffffff92eba6bee0: 0xffffff7f964362a1

    0xffffff92eba6bef0: 0xffffff7f96430312

    0xffffff92eba6bf30: 0xffffff7f96425117

    0xffffff92eba6bf50: 0xffffff7f964250c6

    0xffffff92eba6bf70: 0xffffff7f9642513c

    0xffffff92eba6bf90: 0xffffff7f9642523e

    0xffffff92eba6bfb0: 0xffffff80157d15d7

    Extensions of core in backtrace:

    com.apple.iokit.IOHIDFamily (2.0) [655890DA-E0F2-31B1-92EB-E8734187E80F] @0xffffff 7f96252000-> 0xffffff7f962c7fff

    dependency: com.apple.driver.AppleFDEKeyStore (28.30) [D6FD5533-2362-3320-A475-DFAF27DA24CF] @ 0xffffff7f96247000

    com.apple.iokit.IOBluetoothFamily (4.4.2f1) [B3BAA668-8A2E-35FC-9683-5D3C87498A43] @0xffffff7f963f4000-> 0xffffff7f964b0fff

    dependency: com.apple.iokit.IOReportFamily (31) [00ECF188-29A2-3C48-B4DD-B155077F7B3C] @ ff7f963ed000 0xffff

    com.apple.driver.IOBluetoothHIDDriver (4.4.2f1) [6 A 205151-EF5B-3381 - A4E2 - 5C051F89 8ADD]@0xffffff7f964c4000-> 0xffffff7f964d5fff

    dependency: com.apple.iokit.IOHIDFamily (2.0.0) [655890DA-E0F2-31B1-92EB-E8734187E80F] @ ff7f96252000 0xffff

    dependency: com.apple.iokit.IOBluetoothFamily (4.4.2f1) [B3BAA668-8A2E-35FC-9683-5D3C87498A43] @0xffffff7f963f4000

    com.apple.driver.AppleHSBluetoothDriver (86.0) [51380340-5E01-31EE-9F45 - 9923610 to 6 DC8]@0xffffff7f9795a000-> 0xffffff7f97962fff

    dependency: com.apple.iokit.IOBluetoothFamily (4.4.2f1) [B3BAA668-8A2E-35FC-9683-5D3C87498A43] @0xffffff7f963f4000

    dependency: com.apple.iokit.IOHIDFamily (2.0.0) [655890DA-E0F2-31B1-92EB-E8734187E80F] @ ff7f96252000 0xffff

    dependency: com.apple.driver.IOBluetoothHIDDriver (4.4.2f1) [6 A 205151-EF5B-3381 - A4E2 - 5C051F89 8ADD]@0xffffff7f964c4000

    com.apple.driver.AppleTopCaseHIDEventDriver (86.0) [A2838173-17E6-3D0B-A808-1C058 82B728C]@0xffffff7f97949000-> 0xffffff7f97952fff

    dependency: com.apple.iokit.IOHIDFamily (2.0.0) [655890DA-E0F2-31B1-92EB-E8734187E80F] @ ff7f96252000 0xffff

    dependency: com.apple.driver.AppleMultitouchDriver (304.9) [EFF5B2B8 - 14AF - 3 c 85-A815-9FEAF9813 A31]@0xffffff7f97906000

    com.apple.driver.AppleHIDKeyboard (181.0) [26B1DB13-CA6D-39AB-A892-1EE0B6A025C8] @ 0xffffff7f9793c000-> 0xffffff7f97944fff

    dependency: com.apple.iokit.IOHIDFamily (2.0.0) [655890DA-E0F2-31B1-92EB-E8734187E80F] @ ff7f96252000 0xffff

    Corresponding to the current thread BSD process name: kernel_task

    Mac OS version:

    15B 42

    Kernel version:

    Darwin Kernel Version 15.0.0: Sat Sep 19 15:53:46 PDT 2015; root:XNU-3247.10.11~1/RELEASE_X86_64

    Kernel UUID: AB5FC1B4-12E7-311E-8E6F-9023985D8C1D

    Slide kernel: 0 x 0000000015400000

    Text of core base: 0xffffff8015600000

    Text __HIB base: 0xffffff8015500000

    Name of system model: iMac17, 1 (Mac-B809C3757DA9BB8D)

    Availability of the system in nanoseconds: 1474932759751

    last load kext to 1058936286678: com.apple.filesystems.smbfs 3.0.0 (addr 0xffffff7f99244000 size 409600)

    Finally unloaded kext to 175603804291: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f977df000 size 40960)

    kexts responsible:

    com SteelSeries.ssenext.Driver 0.82

    com.steelseries.BoardListener 8.60

    com Apple.filesystems.smbfs 3.0.0

    com.apple.driver.AudioAUUC 1.70

    com.apple.driver.AppleTopCaseHIDEventDriver 86

    com.apple.driver.AppleHSBluetoothDriver 86

    com.apple.driver.AGPM 110.20.21

    com.apple.driver.ApplePlatformEnabler 2.5.1d0

    com.apple.driver.X86PlatformShim 1.0.0

    com Apple.filesystems.autofs 3.0

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.driver.AppleMikeyHIDDriver 124

    com.apple.driver.AppleMikeyDriver 272.50.31

    com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

    com.apple.driver.AppleUpstreamUserClient 3.6.1

    com.apple.driver.AppleHDA 272.50.31

    com.apple.kext.AMDFramebuffer 1.3.8

    com Apple.Driver.pmtelemetry 1

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.iokit.IOBluetoothSerialManager 4.4.2f1

    com.apple.driver.AppleIntelSKLGraphics 10.1.0

    com.apple.AMDRadeonX4000 1.3.8

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleThunderboltIP 3.0.8

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.2f1

    com.apple.driver.AppleIntelPCHPMC 1.0

    com.apple.driver.AppleSMCLMU 208

    com.apple.kext.AMD9000Controller 1.3.8

    com.apple.driver.AppleIntelSKLGraphicsFramebuffer 10.1.0

    com.apple.driver.AppleHV 1

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    com.apple.driver.AppleMCCSControl 1.2.13

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 37

    com.apple.driver.AppleSDXC 1.7.0

    com.apple.iokit.AppleBCM5701Ethernet 10.1.11

    com.apple.driver.AirPort.Brcm4360 1010.14.1a4

    com.apple.iokit.IOAHCIBlockStorage 2.8.0

    3.1.5 com.apple.driver.AppleAHCIPort

    com.apple.driver.AppleACPIButtons 4.0

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleACPIEC 4.0

    com.apple.driver.AppleAPIC 1.7

    com Apple.NKE.applicationfirewall 163

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.driver.AppleHIDKeyboard 181

    com.apple.driver.AppleMultitouchDriver 304,9

    com.apple.driver.AppleHIDTransport 5

    com Apple.kext.Triggers 1.0

    com.apple.driver.DspFuncLib 272.50.31

    com.apple.kext.OSvKernDSPLib 525

    com.apple.iokit.IOSerialFamily 11

    com.apple.iokit.IOSurface 108.0.1

    com.apple.driver.CoreCaptureResponder 1

    com.apple.driver.AppleGraphicsControl 3.11.33b1

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.2f1

    com.apple.driver.AppleSMBusPCI 1.0.14d1

    com.apple.driver.AppleHDAController 272.50.31

    com.apple.iokit.IOHDAFamily 272.50.31

    com.apple.iokit.IOAudioFamily 204,1

    com.apple.vecLib.kext 1.2.0

    com.apple.kext.AMDSupport 1.3.8

    com.apple.AppleGraphicsDeviceControl 3.11.33b1

    com.apple.iokit.IOAcceleratorFamily2 203.10

    com.apple.driver.X86PlatformPlugin 1.0.0

    com.apple.driver.IOPlatformPluginFamily 6.0.0d7

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.driver.AppleThunderboltEDMSink 4.1.1

    com.apple.driver.AppleSMC 3.1.9

    com.apple.driver.AppleSMBusController 1.0.14d1

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

    com.apple.iokit.IOUSBMassStorageDriver 1.0.0

    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

    com.apple.driver.CoreStorage 517

    com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

    com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

    com.apple.driver.usb.AppleUSBHub 1.0.1

    com.apple.driver.AppleThunderboltDPInAdapter 4.1.2

    com.apple.driver.AppleThunderboltDPOutAdapter 4.1.2

    com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.2

    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

    com.apple.driver.AppleThunderboltNHI 4.0.4

    com.apple.iokit.IOThunderboltFamily 5.0.6

    com.apple.iokit.IOEthernetAVBController 1.0.3b3

    1101.24 com.apple.iokit.IO80211Family

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IONetworkingFamily 3.2

    com Apple.Driver.corecapture 1.0.4

    com.apple.driver.AppleUSBMergeNub 900.4.1

    com.apple.iokit.IOAHCIFamily 2.8.0

    com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

    com.apple.driver.usb.AppleUSBXHCI 1.0.1

    com.apple.driver.AppleEFINVRAM 2.0

    com.apple.driver.AppleEFIRuntime 2.0

    com.apple.iokit.IOSMBusFamily 1.1

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 415

    com.apple.iokit.IOStorageFamily 2.1

    com.apple.driver.IOBluetoothHIDDriver 4.4.2f1

    com.apple.iokit.IOBluetoothFamily 4.4.2f1

    com.apple.iokit.IOUSBHIDDriver 900.4.1

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.iokit.IOUSBFamily 900.4.1

    com.apple.iokit.IOUSBHostFamily 1.0.1

    com.apple.driver.AppleUSBHostMergeProperties 1.0.1

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 4.0

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    com Apple.KEC.corecrypto 1.0

    Model: iMac17, 1, IM171.0105.B04 of BootROM, 4 processors, Intel Core i7 4 GHz, 24GO, MSC 2.34f2

    Graphics card: AMD Radeon R9 M395, AMD Radeon R9 M395, PCIe, 2048 MB

    Memory module: DIMM0/0 BANK, 4 GB DDR3, 1867 MHz, 0x802C, 0x384B54463531323634485A2D314739453220

    Memory module: DIMM1/0, 8 GB DDR3, BANK 1867 MHz, 0x859B, 0x43543130323436344246313836442E4D3136

    Memory module: DIMM0/1 BANK, 4 GB DDR3, 1867 MHz, 0x802C, 0x384B54463531323634485A2D314739453220

    Memory module: BANK 1/DIMM1, 8 GB, DDR3, 1867 MHz, 0x859B, 0x43543130323436344246313836442E4D3136

    Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x14A), Broadcom BCM43xx 1.0 (7.21.94.29.1a4)

    Bluetooth: Version 4.4.2f1 16391, 3 services, 27 aircraft, 1 incoming serial ports

    Network service: Wi - Fi, AirPort, en1

    Serial ATA Device: APPLE ST2000DM001 HARD drive, 2 TB

    Serial ATA Device: APPLE SM0128G, 121,33 GB SSD

    USB device: USB 3.0 Bus

    USB Device: USB Bluetooth host controller

    USB device: FaceTime HD camera (built-in)

    USB device: USB 2.0 Hub

    USB device: BUP Slim BL

    USB device: Sensei gross Gaming Mouse

    Bus crush: iMac, Apple Inc., 28.1

    Anonymous UUID:

    Wed Feb 10 02:20:20 2016

    Panic report *.

    panic (the appellant 2 0xffffff801d7d6bba cpu): Kernel trap at 0xffffff7f9f91e607, type 13 = General protection, records:

    CR0: 0X000000008001003B, CR2: 0X00007000003A6000 CR3: 0X0000000021B76000 CR4: 0X00000000003627E0

    RAX: 0XFFFFFF7F9F920CA0, RBX: 0XFFFFFF8051A0C800 RCX: 0 X 0000000000000000, RDX: 0 X 0000000000000000

    RER: 0XFFFFFF92EC8ABE80, RBP: 0XFFFFFF92EC8ABE90, IHR: 0XFFFFFF801DE0FB68, RDI: 0XDEADBEEFDEADBEEF

    R8: 0 X 0000000000000000, R9: 0 X 0000000000000000 R10: 0X000000000000001B R11: 0 X 0000000000000001

    R12: 0X000000010000050D, R13: 0XFFFFFF801DC92B70, R14: 0XFFFFFF8051ACD3C0 R15: 0X000000010000050B

    RFL: 0 X 0000000000010282, RIP: 0XFFFFFF7F9F91E607, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

    Lack of CR2: 0x00007000003a6000, error code: 0 x 0000000000000000, CPU error: 0 x 2, PL: 0

    Backtrace (2 CPU), Frame: Return address

    0xffffff82dd8bddf0: 0xffffff801d6e5307

    0xffffff82dd8bde70: 0xffffff801d7d6bba

    0xffffff82dd8be050: 0xffffff801d7f4313

    0xffffff82dd8be070: 0xffffff7f9f91e607

    0xffffff92ec8abe90: 0xffffff801dc92c38

    0xffffff92ec8abed0: 0xffffff801dcb59be

    0xffffff92ec8abf10: 0xffffff801dc91d94

    0xffffff92ec8abf90: 0xffffff801dc92017

    0xffffff92ec8abfb0: 0xffffff801d7d15d7

    Extensions of core in backtrace:

    com.apple.driver.AppleHIDKeyboard (181.0) [26B1DB13-CA6D-39AB-A892-1EE0B6A025C8] @ 0xffffff7f9f91d000-> 0xffffff7f9f925fff

    dependency: com.apple.iokit.IOHIDFamily (2.0.0) [655890DA-E0F2-31B1-92EB-E8734187E80F] @ ff7f9e34b000 0xffff

    Corresponding to the current thread BSD process name: kernel_task

    Mac OS version:

    15B 42

    Kernel version:

    Darwin Kernel Version 15.0.0: Sat Sep 19 15:53:46 PDT 2015; root:XNU-3247.10.11~1/RELEASE_X86_64

    Kernel UUID: AB5FC1B4-12E7-311E-8E6F-9023985D8C1D

    Slide kernel: 0x000000001d400000

    Text of core base: 0xffffff801d600000

    Text __HIB base: 0xffffff801d500000

    Name of system model: iMac17, 1 (Mac-B809C3757DA9BB8D)

    Availability of the system in nanoseconds: 21265472724460

    last load kext to 21243655511344: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7fa12d7000 size 69632)

    Finally unloaded kext to 16302975702087: com.apple.iokit.SCSITaskUserClient 3.7.7 (addr 0xffffff7fa12d7000 size 28672)

    kexts responsible:

    com SteelSeries.ssenext.Driver 0.82

    com.steelseries.BoardListener 8.60

    com Apple.filesystems.msdosfs 1.10

    com Apple.filesystems.smbfs 3.0.0

    com.apple.driver.AudioAUUC 1.70

    com.apple.driver.AppleTopCaseHIDEventDriver 86

    com.apple.driver.AppleHSBluetoothDriver 86

    com.apple.driver.ApplePlatformEnabler 2.5.1d0

    com.apple.driver.AGPM 110.20.21

    com.apple.driver.X86PlatformShim 1.0.0

    com Apple.filesystems.autofs 3.0

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.driver.AppleMikeyHIDDriver 124

    com.apple.driver.AppleMikeyDriver 272.50.31

    com.apple.driver.AppleHDA 272.50.31

    com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

    com.apple.driver.AppleUpstreamUserClient 3.6.1

    com.apple.kext.AMDFramebuffer 1.3.8

    com Apple.Driver.pmtelemetry 1

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.iokit.IOBluetoothSerialManager 4.4.2f1

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleIntelSKLGraphics 10.1.0

    com.apple.AMDRadeonX4000 1.3.8

    com.apple.driver.AppleSMCLMU 208

    com.apple.driver.AppleHV 1

    com.apple.kext.AMD9000Controller 1.3.8

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.2f1

    com.apple.driver.AppleIntelPCHPMC 1.0

    com.apple.driver.AppleIntelSKLGraphicsFramebuffer 10.1.0

    com.apple.driver.AppleMCCSControl 1.2.13

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    com.apple.driver.AppleThunderboltIP 3.0.8

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 37

    com.apple.driver.AppleSDXC 1.7.0

    com.apple.iokit.AppleBCM5701Ethernet 10.1.11

    com.apple.driver.AirPort.Brcm4360 1010.14.1a4

    com.apple.iokit.IOAHCIBlockStorage 2.8.0

    3.1.5 com.apple.driver.AppleAHCIPort

    com.apple.driver.AppleACPIButtons 4.0

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleACPIEC 4.0

    com.apple.driver.AppleAPIC 1.7

    com Apple.NKE.applicationfirewall 163

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

    com.apple.iokit.IOUSBMassStorageDriver 1.0.0

    com.apple.driver.AppleHIDKeyboard 181

    com.apple.driver.AppleMultitouchDriver 304,9

    com.apple.driver.AppleHIDTransport 5

    com Apple.kext.Triggers 1.0

    com.apple.driver.DspFuncLib 272.50.31

    com.apple.kext.OSvKernDSPLib 525

    com.apple.iokit.IOSerialFamily 11

    com.apple.iokit.IOSurface 108.0.1

    com.apple.driver.CoreCaptureResponder 1

    com.apple.driver.AppleGraphicsControl 3.11.33b1

    com.apple.kext.AMDSupport 1.3.8

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.2f1

    com.apple.AppleGraphicsDeviceControl 3.11.33b1

    com.apple.iokit.IOAcceleratorFamily2 203.10

    com.apple.driver.AppleHDAController 272.50.31

    com.apple.iokit.IOHDAFamily 272.50.31

    com.apple.iokit.IOAudioFamily 204,1

    com.apple.vecLib.kext 1.2.0

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.driver.AppleSMBusController 1.0.14d1

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.driver.AppleSMBusPCI 1.0.14d1

    com.apple.driver.X86PlatformPlugin 1.0.0

    com.apple.driver.AppleSMC 3.1.9

    com.apple.driver.IOPlatformPluginFamily 6.0.0d7

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.driver.AppleThunderboltEDMSink 4.1.1

    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

    com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

    com.apple.driver.usb.AppleUSBHub 1.0.1

    com.apple.driver.CoreStorage 517

    com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

    com.apple.driver.AppleThunderboltDPInAdapter 4.1.2

    com.apple.driver.AppleThunderboltDPOutAdapter 4.1.2

    com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.2

    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

    com.apple.driver.AppleThunderboltNHI 4.0.4

    com.apple.iokit.IOThunderboltFamily 5.0.6

    com.apple.iokit.IOEthernetAVBController 1.0.3b3

    1101.24 com.apple.iokit.IO80211Family

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IONetworkingFamily 3.2

    com Apple.Driver.corecapture 1.0.4

    com.apple.driver.AppleUSBMergeNub 900.4.1

    com.apple.iokit.IOAHCIFamily 2.8.0

    com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

    com.apple.driver.usb.AppleUSBXHCI 1.0.1

    com.apple.driver.AppleEFINVRAM 2.0

    com.apple.driver.AppleEFIRuntime 2.0

    com.apple.iokit.IOSMBusFamily 1.1

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 415

    com.apple.iokit.IOStorageFamily 2.1

    com.apple.driver.IOBluetoothHIDDriver 4.4.2f1

    com.apple.iokit.IOBluetoothFamily 4.4.2f1

    com.apple.iokit.IOUSBHIDDriver 900.4.1

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.iokit.IOUSBFamily 900.4.1

    com.apple.iokit.IOUSBHostFamily 1.0.1

    com.apple.driver.AppleUSBHostMergeProperties 1.0.1

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 4.0

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    com Apple.KEC.corecrypto 1.0

    Model: iMac17, 1, IM171.0105.B05 of BootROM, 4 processors, Intel Core i7 4 GHz, 24GO, MSC 2.34f2

    Graphics card: AMD Radeon R9 M395, AMD Radeon R9 M395, PCIe, 2048 MB

    Memory module: DIMM0/0 BANK, 4 GB DDR3, 1867 MHz, 0x802C, 0x384B54463531323634485A2D314739453220

    Memory module: DIMM1/0, 8 GB DDR3, BANK 1867 MHz, 0x859B, 0x43543130323436344246313836442E4D3136

    Memory module: DIMM0/1 BANK, 4 GB DDR3, 1867 MHz, 0x802C, 0x384B54463531323634485A2D314739453220

    Memory module: BANK 1/DIMM1, 8 GB, DDR3, 1867 MHz, 0x859B, 0x43543130323436344246313836442E4D3136

    Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x14A), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

    Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

    Network service: Wi - Fi, AirPort, en1

    Serial ATA Device: APPLE ST2000DM001 HARD drive, 2 TB

    Serial ATA Device: APPLE SM0128G, 121,33 GB SSD

    USB device: USB 3.0 Bus

    USB Device: USB Bluetooth host controller

    USB device: FaceTime HD camera (built-in)

    USB device: USB 2.0 Hub

    USB device: BUP Slim BL

    USB device: Sensei gross Gaming Mouse

    Bus crush: iMac, Apple Inc., 28.1

    Uninstall them according to the instructions of developers and test. If the panics persist remove the ram from the third party and the test.

    SteelSeries.ssenext.Driver 0.82

    com.steelseries.BoardListener 8.60


  • Adapter DLL: Name of the function change &amp; params without unloading of the DLL

    Hello

    I use teststand adapters API to dynamically build a DLL call step. Each dll function is called through this subsequence "DLL Manager."

    Tried 2 methods (here is a summary of the code):

    1 ActiveX as follows:

    CommonCModule.ModulePath = myDllpath

    CommonCModule.FunctionName = myFunc (Note: this call unload the DLL previously loaded)

    Module-> LoadPrototype

    (to set the params)

    2 steps statement:

    RunState.Sequence.Main ["Call DLL function']. TS. SData.Call.LibPath = myDllpath

    RunState.Sequence.Main ["Call DLL function']. TS. SData.Call.Func = myFunc (Note: this is a step, but the info seems not be updated-online the new feature is called not properly)

    Module-> LoadPrototype

    (to set the params)

    The two methods is exactly the same behavior, but good for the 1st function I call a work or if I dump the dll after the execute step.

    However, is there a way to use these steps (or other) at stage configuration, but without unloading the DLL between each call. In my test sequence, I must OpenConnection with the object to be measured before starting my orders, as well as the dll should not be discharged to keep the connection open...

    for example

    (1) OpenConnection()-online this function takes the handle of communication with the device

    (2) myCommand1()

    (3) myCommand2()

    (4) CloseConnection()

    Thank you for the help

    C.

    If I understand your question, there are several ways to solve the problem. The easiest is to place a call to the dll before your loop that you never change programmatically. This step will then keep the loaded dll (if any stage that uses a dll is loaded, then the dll remains loaded. A dll is unloaded when all the steps that use it are unloaded.). Another option is to have just internally your call to the dll LoadLibrary on itself so that it is never unloaded. You then leave the process to unload the dll well. Another option is to add the code directly to the sequence that explicitly, charge and discharge your dll with the Win32 API LoadLibrary and FreeLibrary.

    That said, what you describe, if I understand correctly, looks like a very unusual use of TestStand. Looks like you use TestStand as a dll calling rather than as a sequencer and write your own sequencer above it instead. Have you thought to generate an entire sequence to run in teststand, rather than a step at a time? Basically, convert your test script in a TestStand sequence.

    Hope this helps,

    -Doug

  • How unload us a DLL with several different COLD?

    Hello world

    I am designing an application that implements several functions of a DLL that I build.

    I call two functions one after another to get the results of my functions. The first function (Read_Property) made many operations and saves its information in a layer of data inside the DLL. (Basically certain static arrays of string). The second one (get_Data_Array) is just a "get" function which returns the string at a position that is defined in a table.

    The first version of my application was a state machine with a façade where the user just had to enter the parameter of the function, then press a button. I wasn't unloading of the DLL at any time because I thought that LabVIEW makes itself when I close the instance of the application. I got excellent results and everything was fine and that I could make multiple calls to my pair of functions without having any problem. However, I discovered a bug when I close the instance of my application and I started another. My first function got a timeout for no apparent reason. I worked with my DLL in a context of C and I know that this kind of bug appears when multiple instances are running at the same time. After a time out, the only thing I could do to fix this was to restart LabVIEW.

    So, I think my problem comes from the fact that there is interference in some static in the first function variables because the DLL has not been discharged properly. After that, I tried to unload the dll in the last State of my state machine because it wipes out all static variables, but it was not a success. The same problem was still present. After that, I tried encapsulate my problem to a single VI. So I just tried to run my 2 functions for one after the other and then unload the DLL by connecting an empty path both of em. As my first version, after two or three tracks of my VI, I am a time-out again.

    My VI looks like this:

    Why does my DLL doesn't unload?

    Thank you

    I have some progress here.

    I just added some check to see if the DLL was attach/detach, so I would like to know if the DLL was unloaded or not.

    After a lot of testing, I realized that my first version was loading/unloading successfully my DLL every time.

    However, I still have my time-out and I bet it's because different threads execute my DLL at the same time.

    I'm going to do another topic for my problem, because it is not the same topic.

    Thank you for your help.

  • My computer says that the battery is "plugged not charging" I just got a new. Any ideas how I can solve this problem?

    My computer says ' plugged not supported "I just got a new battery... How can I fix?

    Hello

    You should really be asking in the forums for your version of Windows. Click on the
    Appropriate forum in the Menu bar under the Logo of answers on the upper left on
    This or any page.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    ---------------------------------------------------------------------------------------------------------------------

    Are you sure that the battery is compatible with your system?

    References to Vista also apply to Windows 7.

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    =================================================================

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    =================================================================

    Other information that might help:

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Battery meter: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

    Battery saver
    http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

    Solutions to common battery problems
    http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

    What is the precise the battery meter?
    http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

    ============================================================

    Try this - to make a Restore Point

    How to create a System Restore Point in Windows 7
    http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
    who will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

  • My computer is stuck in a loop-it starts, the Welcome screen appears, I click on my name and made it appear my desktop background, but not icons. It then saves automatically power off. I started using the safe, but it's still just the power loop.

    Windows XP is my operating system.  My computer is a desktop Dell Dimension 457.  I think I must have got a virus/malware.  Please help me to access my computer!

    First of all, open and print this article from Microsoft - http://support.microsoft.com/kb/555648

    East of the fault of the only thing that I can see the information about adding the userinit.exe line - they forgot to include a comma at the end of the registry key.  So this print and add a comma with your pen to ink so that when you return as a result of this document you will not forget to register.

    Now, do a search to find and download BART PE to create a BART PE Boot disk (boot from the CD-Rom drive).

    Before you create the BART PE Boot disk, download and install Spybot Search and Destroy.  Then do a update to get all the updates to ensure that you have all the latest definitions for Spybot.  When you create the BART PE Boot disk - make sure you include the Spybot folder you have just downloaded and installed.

    I think that if you download and install LavaSoft Ad Aware Free will take place as well. Just download, install and do the updates it as well... Be sure to include this issue as well when you create BART PE Boot disk.

    Now, once you have created with these extra utilities startup disk, boot from the CD.

    Change the registry as a result of the above Microsoft article.  To enter the registry once BART PE CD is loaded, click on the GO button and click RUN and type REGEDIT and press ENTER.  When the registry opens, click the HKEY_USERS.  In the menu, and then click FILE.  Then click LOAD HIVE.  Then navigate to C:\WINDOWS\SYSTEM32\CONFIG\Software - note: the software is the name of the hive file registry you want to open.  When it is open, be sure to give it a name that MyHive will work.

    Follow the rest of the Microsoft Article in the link above to change the registry values.

    Once you have finished editing the registry, go back and click on the name of MyHive, then click file and unload the hive before leaving.

    Once this is done, then go to the command prompt, navigate to the executables to run Spybot, let it find and delete everything it can.  Then, if it will run - run the executable file for AD - AWARE Free Edition.  Let find and delete what it can.  I don't remember whether or not AD-AWARE will run on boot CD.  I know that Spybot is going.

    I suggest you to start in safe mode with support for network at this point.  I had good luck with my problems in this way.
    I hope that it will arrive where you can connect at LEAST.  Once in safe mode with network support I would then suggest to go to www.microsoft.com/protect and going to the PC or the PC security, regardless of the title/link is.  Then perform a free scan with Microsoft One Care Live.

    ON CHANGE:

    Oh... also, in the Microsoft article, there may be the drive letter as the X: drive... won't talk down and belittle everyone and their intelligence... I know that some people can be so literal and making a mistake in following the instructions is not an indicator of intelligence... but the X: should be C: or what is the letter of your boot drive... I know that for most, if not all here is a given but would not be a mistake bonehead by someone...

    Thank you... and it will be useful...

  • strange problem with the PC just stops

    Hello

    I have a user who has a PC that keeps closing.  Well, I should say two PC.  After fighting with the issue works for several months and not getting anywhere, we decided maybe the 1st PC (Dell Optiplex 755) has just had a bad image or something and decided to give it just a PC brand new (Dell Opiplex 760).  Put a new picture on it and the applications she needs and bam... it is always set to zero.  The only things off the previous PC I parked has its Favorites IE, my Docs and desktop icons.  I thought it was just turn off then I swapped the surge by hope protector and has no good.  I spoke with the user and she says each time it shutsdown she gets a message "Windows is shutting down."  So, for me, it seems that there is something which is indicative of his PC through the shutdown process.

    After some research on his new PC, it seems that when restarting PC that this trend is coming in the case Log - in order of first at the last before the reboot.  I have attached the error and the description given when opening the error message in the event viewer.

    Userenv
    Windows cannot unload your registry file classes - it is still used by other applications or services. The file will be unloaded when it is no longer in use.

    Userenv 2
    Windows saved user PROD\patricyo registry while an application or service was still using the registry during log off. The memory used by the registry of the user has not been released. The registry will be unloaded when it is no longer in use.
    This is often caused by services running under a user account, try configuring the services to run in the NetworkService or LocalService account.

    ATISmart
    The service has started

    LMS
    LMS Service started

    PC Anywhere
    Host started
    Connection object: "C:\Documents and Settings\All Users\Application Data\Symantec\pcAnywhere\Hosts\pcaNSHost.bhf"
    Device type: TCP/IP
    Serial number: 0001-067A-0000-0000-0000-0000

    EACH
    Notification of the user service Intel (r) began.

    Security Center
    The Security Center service has stopped.  He was prevented from running by a software group strategy.

    Micorsoft Fax
    Fax service failed to initialize devices (virtual or TAPI) awarded faxes. Faxes cannot be sent or received until a fax device is installed.

    Microsoft Fax 2
    The outgoing routing rule is not valid because it cannot find a valid device. The outgoing faxes using this rule will not be routed. Check that the devices or target device (if it is routed to a group of devices) is connected properly installed and activated. If routed to a group, make sure that the group is configured correctly. Country code: ' *' area code: ' *'

    When your PC works fine for 3 or 4 days this chain of events is not displayed.  There are only political messages.  Have you ever seen something like that before or have any idea where I might start?  :)

    Thank you

    Rich

    It's funny.  It ends up being the user had a key on the keyboard value 'Shutdown' PC.  Some _ of Belkin keyboard.  Finally, she said "I think it happened shortly after clicking this key."  It was after we gave him a new PC since the follow-up of the matter on the image of the all-new and fresh PC.

    Funny stuff.  I love, hate my work :)

  • T61p 6460-DVU - nvidia driver unloads randomly

    I am a support person office experimented with a few deployments of massive laptops under my belt, and it drives me crazy:

    We recently bought about 12 T61p laptop of CDW. It comes to this specification:

    T9300(2.5GHz), 2 GB RAM, 160 GB 7200 RPM HD, LCD 15.4 in 1680 x 1050, 256 MB nVIDIA Quadro FX 570 M, CD-RW/DVD-RW, Intel 802.11agn wireless, Bluetooth, Modem, 1 Gb Ethernet, UltraNav, secure chip, fingerprint, Li - ion, WinXP Pro 9 c reader

    We have upgraded the ram to 4 GB.

    The problem, I continue to have is the Nvidia driver randomly discharge itself or hangs and does not appear in the display panel, it said "Nvidia XXX on Thinkpad LCD" instead of "on". No video more acceleration. Windows draw like a 286.

    Sometimes the issue is fixed with a complete system shutdown, sometimes it doesn't. He arrived on the dock with a monitor installed and the dock without having a. I tried the latest driver Nvidia for the 570 M on the Lenovo site, no difference. Also tried the new Director of presentation and more recent update of BIOS, no difference. He arrived more than one of the 12 that we bought, several times.

    I thought it could have been a corrupted image, I did so I started on the IBM CD recovery. I had installed SP3 of XP, MS office 2007 and some other random applications, of which none had nothing to do with the video card. He did it again, unloaded the driver. shut down and restart disappear that day, but for how long?

    I don't know what else to check at this point, so far I have excluded that it is our image of the laptop, because he did the same thing with a freshly restored (after installing SP3).

    Monitor resolution or profiles of switching with presentation Manager seems to be a catalyst for it to do, but it does without changing any resolution sometimes as well.

    I tried to download the software of nvidia control panel but just using the driver, and which seemed to make it happen less, but there's t - it.

    The only thing I have not tried is completely uninstall Manager presentation and do not use it at all. I think it might be a problem with the Director of the presentation and the nvidia card in this laptop, but I have no idea.

    Does anyone have advice for me? I already talked to lenovo and their support is worthless. He comes to ask me to send them the laptop. It occurs on several laptops so that will not help me. Support of CEP was a little more helpful, but it's always a dead end.

    I just want to post a response here because I found out why the problem occurred, after at least 2 weeks of troubleshooting.

    We use a parameter in the boot.ini XP called the "/ 3GB" switch.  This switch allows programs that require a lot of memory to access physical ram more than without it and restricted drivers windows/1 GB of memory (I could be wrong on that, but that's what I said).

    Unfortunately, as we discovered - the Nvidia Quadro FX 570 M card do not have this setting, and it doesn't have enough RAM to start correctly when the computer starts.  It then uses the generic adapter "VGASAVE' that windows uses when the video card is not working properly.

    There is a tweak to be able to continue to use this switch/3 GB, here called the switch/USERVA, detailed on the microsoft site: http://support.microsoft.com/kb/316739. I used /USERVA:2950 in the boot.ini file and the card works properly again.

    I hope someone on google reads this thread and not wasting so much time that I had to try to solve this problem.  We never had this problem with ATI X 1300/X 1400 in the Thinkpad T60, however.

  • My wireles arthos stoped working adapter. Canoe conect wirelesly

    just got comp instaled.my wireles picked up routers signal.somehow my adapter collapsed wireles working.can you help me repair? Thank you chris.

    Hello

    Upplug power on the modem and the router. Wait 3 minutes and then plug the mode. When he
    is running, then plug in the router. When the router is running, restart the computer. That
    is known as the hard reset.

    -----------------------------------------------------------------------------------------------------------------------------------------

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
    Update your WiFi drivers on computers. How you are positioned in the router? Are there
    obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Check with the manufacturer of system first (Manufacturer of motherboard for customized systems). And then the real
    device manufacturer and finally Atheros (some might have drivers who are owners and not available)
    to the Atheros).

    Drivers Atheros WiFi.
    http://www.Atheros.cz/Atheros-wireless-drivers.php

    Atheros - all drivers
    http://www.Atheros.cz/

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I have a hp a6480a.pavillion I want to access internet through a cable modem that has a wireles

    Hi, I have a computer 3 year I hope that I can run on the internet from a wireless modem. The modem works fine on the top of the tower. I want to just plug in the main computer wireless modem. I can't find the hook wireless required upward on the main computer. Can anyone help? Best regards, Bruce

    Hello

    Based on the information on this page, there

    Expansion slots:

    1 PCI Express x 16
    2 PCI Express x 1
    1 PCI

    It also has a tuner ASUS DVB-T/PALTV card and NVIDIA GeForce 8500 GT card. I don't know where they are. Therefore, you always at least 1 PCI Express slot and 1 PCI slot free. My suggestion is to use wireles PCI Express card as this USB or wireless such as this.

    None of them should come with a driver CD and instructions how to connect to an existing wireless network.

    Kind regards

  • unloading of feature to make dhcp off the WLC and put it on Active Directory.

    I need to use the feature of unloading to dhcp off the WLC and put it on Active Directory.  Someone at - it a walkthrough or a page for this?  I know it's just a checkbox and a redirect to the new dhcp server, but where the hell is the configuration on the WLC?

    Thank you!

    -anne

    You can go there.

    http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01001001.html

    Point to your existing ad integrated DHCP server.

Maybe you are looking for