K430 replacement of RAM not detected

Similar Questions

• Upgrade RAM not detected

  I own an Acer Aspire E1-571-6856 Intel i5, original 4 GB of ram, expandable to 8 GB, hd4000 graphics.

  I bought a kit of 8 GB of crucial memory specific for my laptop model.

  I put the RAM in the memory locations, but when I went to control panel, System tab, it says that I have only 4 GB of RAM. Also, I went to the BIOS and it also says I have only 4 GB of RAM instead of 8 GB of ram.

  Why is the extra 4 GB RAM not detected?

  I was not just push pretty hard to get the RAM module in place.

• RAM not detected in Windows Pro 8.1 x 64

  Hello. I hope someone can answer my question.

  I have 2 x 4 GB RAM installed in my computer. Everything works fine under Windows 7, but as I have upgraded to Windows 8.1 earlier, I noticed that the computer recognizes only 4 GB of RAM in the system. What is happening and how to fix this?

  Hi Shah,

  This behavior can occur if the RAM is not detected in BIOS or the RAM stick is not inserted correctly.

  I suggest you to check whether or not the RAM is detected in the BIOS.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• HP 8500 replaced, software does not detect printer even though I can't ping / connect to the web interface

  Windows 7 Pro 64

  Reference Dell

  Printer connected via ethernet

  software worked well until the printer has been replaced by HP under warranty

  in the new device, the screen of the wizard to set the time/language etc.

  Software HP does not detect the device and so I can not use all the features.

  I can connect to the printer via IP and also tried to put the TCP/IP port with printer static IP. Can I print using this, but the software "suite" does not detect the printer.

  Removed all software, cleaned the registry, removed the IP port, re-installed the software, does still not detect printer.

  Installed HP printer diags and it passes all the tests, but the suite software HP will always be NOT detect printer.

  Tried without firewall, tried with, still can ping printer, connect to the web interface, the static value, always the software does not detect the printer... so whats left to please other than an another replacement warranty which is used to solve the problem, as it is definitely bad coding in the suite.

  I also tried downloading drivers/full later on the HP site.

  Note that all windows updates are met, reconstruction is out of the question that it is a machine of the company and would almost take me 3-4 days to replace all the software on it (Sage, DW, COFFEE, HMRC).

  Hi-Dillion, Declan

• HP Pavilion dv6 (3040sl) - RAM not detected

  Hello

  I have a problem with my laptop RAM Detection. I had my dv6 for almost 3 years. Never had any problems.

  Recently, I realized the performance became worse and worse and could not understand the reason.

  Almost by chance today I have real system says is have 2 GB of RAM instead of my usual 4 GB (has always been 4 GB).

  Nothing has changed in my pc. No major updates or anything. Does this mean that my RAM is broken? Or can we the mobo RAM slot?

  I opened the pc and the two Rams (2 GB x 2) seems ok for me. Not sure what I should do then.

  Try removing and reinstalling the memory. Also you can do a memory disk (CD or thumb drive) to test and run memtest86 to check and see if one of the modules is bad. You can also replace the modules into the two slots that need to diagnose if one of the slots is bad. If it shows 2 concerts or combining then two modules are good but a slot is bad. In last resort you can try to clean the gold leads modules very gently with a clean cloth and blowing the memory locations to see if, perhaps, dust arrived and does not have a good connection.

  http://www.Memtest86.com/

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• RAM not detected in the last two Slots W520 (lack of 8 GB memory)

  Hello Lenovo community!

  I need help with something grimly. I ordered my Lenovo Thinkpad W520 almost 4 years with 16 GB of RAM. In other words, that he always had the 16GB since I got it. I had recently made the switch from Windows 7 to 14.10 Ubuntu to OS. I like Ubuntu but realized the feature (games lol) for Windows 7 is a no brainer. I started my relocation and when I started Windows 7 it says I have only 8 GB of RAM!

  Even the BIOS shows that there are only 8 GB... Why this is happening? I paid a lot of money for the extra RAM then why he would not be save this is beyond me. I did various diagnostics on my memory nothing helps. If this community could guide me in the right direction that would be great.

  What is 4X4GB or 2X8GB? CPU?

• Tecra Z50 - C - 12F M.2 SSD replacement not detected

  Hi all

  I just received a new Z50-C-12F and wanted to replace the 256GB SSD with a more wholesale (Samsung 950 Pro 512 GB m2)

  Unfortunately, the new SSD is not detected at startup, but I don't understand why.
  The original SSD is a Samsung MZ-NTY2560 (B & M-button) a new is a key of M, but this is the connector to the laptop.

  I tried to adjust the UEFI to MSC (default is UEFI (Legacy)) in the BIOS but even boot from a DVD of magic parted shows no signs of new SSD.

  TIA,

  Steve

  I tried a second new m2 (Samsung 950 Pro 512 GB m2) and still no sign of recognition.

  Any thoughts?

  Steve

• Re: Satellite P300-150 - battery replacement not detected

  Hello

  I bought a replacement battery for my laptop that I got an error message saying that I should replace my battery.

  I bought a compatible battery, but it is not detected by my system.

  The battery indicator was strong when I plugged in for the first time in the power adapter, as it was when my old battery charge - but now it blinks in and out.

  I can't boot from the battery alone.

  Battery: PA3536U-1BRS, 4000mAh

  New: PA3536U-1BRS, 7800mAh

  Running windows 7.

  Any help would be greatly appreciated!

  Tom

  Post edited by: tomangegi - got a bit mixed model number

  Is the new battery compatible and listed as replacement for your Satellite P300?

  Somehow I think that it is not compatible and original Toshiba battery. I'm wrong about this?

• W510 does not detect 16 GB of RAM

  Hi, I bought Thinkpad W510 a month ago and then I updated memory up to 16 GB. My laptop detects only 8 GB of RAM. I tried to change the RAM, but it detects only the RAM into the slots on the keyboard. It does not detect the RAM which is at the back.

  My Ram is DDR3 - 1333 - PC3 - 10600. I have 4 X 4 gigabits.

  Am I missing something or I have to configure to make it happen?

  Thanks for any help.

  Concerning

  Amit

  Ok. Fixed.

  Necessary for installing memory in specific order.

  Open a ticket with Technical Support and they guided me to the article. I do not have the link right now as they asked for specific serial number of google.

  If I can find the article, I will udpate.

  Update: link to the KB - http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-75886

• Equium A300D - 16 c - battery not detected after replacement

  I have an Equium A300D - 16 c. The original battery was shot while I bought a stack of real PA3727-1brs 12. I have put in the laptop, it seems to load, but in the corner, he always says no battery not detected even if its load on. When I leave the charger it says remaining unknown.

  I tried the usual stuff to go into Device Manager and uninstall control compliant apci and still he has not solved it self. I've also updated my bios to the newest one. I just wanted to know what could I do so I can see how much battery is left, and if the laptop can recognize I..

  Hello

  Is this a battery Toshiba of origin of an authorized service provider?

  Usually, the new battery should be detected after the first start, I recommend that you charge the battery while the laptop is turned off. Start the laptop with battery only and check if she recognized properly s.

• Hard drive not detected 50% of the time to start up

  I have a model of Macbook Pro mid 2012 with the following changes:

  • Upgrade to 16 GB Ram
  • DVD player, replaced by Bay and old (existing) 500 GB hard drive for storage
  • Hard drive replaced with 250 GB SSD (Samsung EVO 850)
  • Windows via Bootcamp 10
  • Mac OS X Yosemite
  • Refind installed at startup

  Recently, my existing SSD drive gave me a lot of questions - so I'm a new and SuperDuper'ed the existing on it. Formatted the Windows partition and reinstalled Windows 10.

  I have 50 GB on the Mac drive and 200 concerts on Windows.

  The issue that I am facing is that on every other bootup, the Mac does not detect the hard drive.

  If I OPTION-press and hold the button, I see only the 500 Gig data drive (which is not bootable).

  Then, I need to restart and COMMAND + R (or D) to enter the internet recovery mode, wait until the choice of network is displayed.

  Then when I reboot, I am presented with the original hard drive and multiple start options (Mac / Windows) on Refind.

  I don't think it's a matter of refind, as happens even with uninstalled Refind.

  This does not happen when I plug my old (SSD by default).

  What could go wrong on the new hard drive and I can barely turn the question?

  Thank you.

  What are the contents of the disc in hand and Optibay Bay?

• Call of duty 4-Modern Warefare CD not detected

  DVD rom problems

  I have call of Duty 4 Modern Warefare and my cd rom installed buit now it won't play solo since it does not even detect the cd in the status bar. I have win 7 9800 gt 4 GB ram CPU intel quad core 2.33

  Hello

  Check with the support to make the game and ask in their forums known issues.

  Who is the only drive that can't read or are there problems with some or all?

  ---------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Tips for when your webcam is not detected

  EDIT: If you have recently upgraded to Windows 8 and experience this problem, please read this document.
  
  Here are some tips to solve a problem of webcam not detected.  I see this question get asked a lot so here are the steps you should take to resolve the problem.
  
  To start, you make sure that the device is detected by Windows.  The following instructions are for Windows 7, but should be very similar to Windows Vista and Windows 8.
  
  Option 1: Check Device Manager to make sure that it works correctly.

  1. Right-click the Start button, type "Device Manager" and press ENTER.
  2. Once charges Device Manager click 'View' then "Show Hidden devices."
  3. Locate the section "imaging devices".
  4. Note If you see the webcam here.
  5. If the webcam is listed, click it and check that it is not 'disabled '.
  6. If the webcam is listed and disabled, go to Option 2.  If the webcam is not listed, you will spend on Option 4.

  Option 2: Allow Windows to re - install the device.

  1. All remaining in the Device Manager, right click on your webcam and select "Uninstall".
  2. If you are prompted select "remove driver and driver package".
  3. Restart your laptop and allows Windows to attempt to reinstall the webcam.
  4. If Windows detects the webcam check the operation of the webcam.
  5. If Windows does not detect the webcam and install move to Option 3.

  Option 3: Manually install the drivers for your webcam.

  1. This site allows to determine your product/model number.
  2. Visit the Page of Support HP and use this product number to visit the specific page of your product.
  3. Go to "Drivers and software" and are looking for the driver for your webcam.  NOTE: the drivers for the webcam are sometimes provided with the YouCam software.
  4. Download and install this driver.
  5. Restart the PC.
  6. Check the features.

  Option 4: Manually re - detect the hardware.

  1. Disconnect all external devices.
  2. Shut down the laptop.
  3. Remove the battery and AC power.
  4. Press and hold the power button for 10-15 seconds.
  5. Reinstall the battery and AC power.  Then turn on the laptop.
  6. Once Windows is loaded back to the Device Manager.
  7. Selection 'Action' and then 'search for material changes.
  8. If the Device Manager detects hardware let settle.
  9. If Device Manager does not detect the see material Option 5.

  Option 5: System Restore and system recovery.

  It is very well described in this document.  Note that all data not saved prior to a recovery will be lost.

  6 options: Repair or replacement.
  
  If none of these solutions worked for you, it is likely that you are experiencing a hardware failure.  It is possible to replace the webcam or reinstall a loose ribbon cable.  However, it is one of most difficult repairs on the laptop.  If you want to try this repair, you can visit your laptop support page and go to the section "manuals".  There is normally a "maintenance and Service Guide" for laptops, this will cover the disassembly of the laptop.  You can then use HP parts Surfer to locate the part for your laptop.

  If you do not want to attempt a repair yourself you can ask HP about a repair.  For customers in the United States / Canada, you can call 1-800-474-6836.  If you are not in this region, you need visit the HP Support Site to get contact information for your region.

  I hope that everyone considers this information useful!

• NB100 - 11G - HARD drive not detected during installation of Windows XP

  I have a Toshiba NB100 - 11G with Win XP Home and a 160 GB HD RAM upgraded 1 024 to 2 GB. Recently, I tried to install Win Pro SP3. However, it did not work and the message was that the hard drive was not recognized. I have no problem restoring with the provided Toshiba Recovery CD (which has Win XP Home).

  Does anyone have an idea why I couldn't install Win XP Pro? Could it be related to my RAM upgrade? (The only thing I changed.)

  Thanks for a response. Sincerely, Allan.

  Hello

  The problem is that you integrate the driver SATA Windows XP can detect the internal HARD drive. Otherwise, you get a blue screen or the HARD drive is not detected.

  With the help of nLite (freeware tool), you can create a new drive to install XP with SATA driver package. This is described here:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  If you have any other questions, you can also see similar forum topics. You can find hundreds of threads here in the forum about it.

• Tecra Z50-A-11V: new SSD but earn 8.1 does not detect

  We bought a M550 Crucial 256 GB drive and you want to replace in a Toshiba Tecra Z50 - Av1

  We don't want to make any transfer of data or cloned.
  We want to do a clean install with Windows 8.1
  The BIOS recognizes the SSD

  But when you install Windows 8.1 doesn't detect any disk connected to the device and asked additional drivers. Windows does not detect the drive

  https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
  https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
  https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg

  I have also tested with version lasted this driver (old F6 to start to locate the hard disk driver)

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23496&lang=eng&wapk w = f6flpy-x 64.zip

  and with toshiba package
  http://support.Toshiba.com/support/viewContentDetail?ContentId=4004211
  You can see that I have the version 3.20 BIOS. Interestingly, I see that the last one is the Toshiba has released version 3.1

  But still the CRUCIAL drive is not recognized by the instalation of windows startup

  The problem is similar with ubunto, kubuntu,... the drive is detected by the BIOS, but not for the OS.

  any help?
  Thank you

  Hello

  You solved this problem?
  Could you install system 8.1 Windows on this SSD drive?

  I think that the installation of additional drivers during the setting procedure isn't necessary since Win 8.1 should already contain pilots essential.
  From my point of view of the few, there could be a compatibility issue (maybe the SSD firmware update could solve that problem).

  What another SSD disk usage? You have the same problem with other SSDS from other manufacturers?

  Your comments would be appreciated.