KB 2111900: Caution: do NOT run script before installation of the configuration of the VDP?

Similar Questions

• HP solutions Center can not run because your installation of the device is not full (Windows 7)

  I downloaded and tried to install HP Photosmart C309a all-in-One Driver Software 14.0 Rel.5 in a new installation of Windows 7 Professional (not an upgrade). Installation works very well until the moment of the connection to the printer.

  I tried the wired and wireless network connections. The screen "Found network printers" lists the printer with the correct IP address and MAC address. Network Diagnostics screen shows any errors. The screen "Installation of your printer" poster "Detected printer", then says "printer setup has failed to complete." Retry does not help. Removing and reinstalling the software do not help.

  The Windows devices and printers control panel shows the printer as "Series of HP Photosmart C309a (redirect 2)". I am able to print a Test Page from Windows printer without error. The 'print options' are also available.

  The printer works fine with other computers on my home network, one running XP and a Vista running.

  How can I get the software installation to complete successfully and provide the printer the HP Solutions Center?

  Thanks for your help.

  Well, I have solved my problem. I'm not sure that these steps are necessary, but here's what I did.

  1 follow the instructions in "Completely uninstall and reinstall the HP software" HP. In particular, 'clear the temporary files and folders' and 'Disable Terminate and Stay Resident (TSR) programs and any other lighting programs' before reinstall you, then "Reactivate startup programs", after the reinstallation.

  2. install base drivers, and NOT the complete software package with applications.

  3. If the basic install works, then install ALL the applications (eg Solution Center). Do not try to install some applications but not others.

  4 remove the applications that you do not (e.g., Online Shop).

  Maybe the steps 2-4 are not mandatory, but they worked for me.

• Why not run prinnter canon LBP2900 ON the win.7

  Why not run prinnter canon LBP2900 ON the win.7

  That's like asking ' why not my departure from the car?

  You have not provided enough information.

  HOW TO ASK A QUESTION:
  http://support.Microsoft.com/kb/555375

• Win 7 does not run script

  Hello

  I recently had to upgrade my XP to Win 7 Pro 32 bit OEM when my HARD drive crashed.
  After having completed the roll-out and connected my computer to the domain, I disconnected and power in order to have my account AD map my network drives from a script I created. (This script worked fine under XP).

  After have logged you on the network, readers were not mapped, sort of my computer, I browsed to the directory Sysvol\windows\sysvol\scripts and manually run the script file. Once she had finished, I saw all my network drives.
  The script is loaded into the profile tab in the logon script field. It is a simple batch file.

  If anyone knows why it worked for XP and not for Win 7? I change all the permissions on the script. The account on Win 7 is a standard user account.

  Hello
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:
  Windows 7 IT Pro
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Script Center

  http://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

• Microsoft Fix It does not "Windows Script Host gave me the error message: cannot find engine\ 'VBScript' Script script.

  installed Microsoft Fix It.  When I try to launch it I get the message that there is an error during the MicroFix troubleshooting it won't work.  I can only use the online version.

  I had a problem installing a program and products purchased for the program.  Windows Script Host gave me the error message: cannot find engine\ script 'VBScript' Script 'C:\Users\debra\AppData\roaming\MyEQBoutique\Boutique Registry Entries.vbs.  I uninstalled the program.  I ran the SCF.  Ran the clean boot, and then set back to normal. I restored to the previous day.  I ran the scan online to remove malicious whatevers, also, I went and changed all my default settings.  Windows tells me that it is up-to-date.  I have Windows Vista Home Premium, I use Microsoft defender and Microsoft Security Essentials.  What is going on? What can I do else?

  Hello

  (1) have you made changes before the start of this issue?

  (2) have what program you tried to install?

  (3) you are able to install any other software on your computer?

  (4) what fix - it you try to run?

  This occurs if the filevbscript.dll runtime script is not properly registered in the system.

  Try the steps below and check if you are able to run the Microsoft fixit.

  a. click the Start button, type cmd. In the result of the research with the right button on cmd and select run as administrator.

  b. type cd %windir%\system 32 (Note: there is a space between the system and 32) and press ENTER.

  c. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.

  d. type regsvr32 jscript.dll in command prompt, and then press ENTER.

  If the registration was successful, you should now see the following message is displayed:

  DllRegisterServer in vbscript.dll successful.

  e. now, try to run the Microsoft fixit.

  See also:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  After the question in the following forum if the problem with fix - it persists.

  http://social.Microsoft.com/forums/is/fixitcenter/threads

  Let us know if that helps.

• Run Scripts of Actions of the Extension Panel

  Please forgive my lack of experience with scripting. I'm especially a writer of paste copy - cut.

  I have an extension Panel for my users in Photoshop that contains buttons to items of menu and tools. I have also two buttons that run scripts which have been fulfilled Actions scripts. What I've learned, it's that these buttons on the extension Panel do not work if the action of two scripts are not loaded in the action panel.

  What I would like to ask you is for scripts to run without having to the load in the Actions Panel. Is what I have in my file hotscript.jsx to one of the Actions below. How would this code does not require scripts to be loaded in the Actions Panel?

  function selShade()
  {var idPly = charIDToTypeID( "Ply " );
      var desc3 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
          var ref2 = new ActionReference();
          var idActn = charIDToTypeID( "Actn" );
          ref2.putName( idActn, "Shade" );
          var idASet = charIDToTypeID( "ASet" );
          ref2.putName( idASet, "Shade" );
      desc3.putReference( idnull, ref2 );
  executeAction( idPly, desc3, DialogModes.NO );
  }
  

  The Second script is the following:

  function selCreatepdf()
  {var idPly = charIDToTypeID( "Ply " );
      var desc14 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
          var ref6 = new ActionReference();
          var idActn = charIDToTypeID( "Actn" );
          ref6.putName( idActn, "Before After Presentation" );
          var idASet = charIDToTypeID( "ASet" );
          ref6.putName( idASet, "Before After PDF" );
      desc14.putReference( idnull, ref6 );
  executeAction( idPly, desc14, DialogModes.NO );
  }
  

  I hope that this is possible, because it would eliminate my users having responsibility of the Actions in the Actions Panel.

  Thanks in advance for your help - Sam

  Hi Sam,

  I strongly support the advice of Chuck. Your ScriptingListener code should be equivalent to:

  function selShade() { app.doAction("Shade", "Shade") }
  function selCreatepdf() { app.doAction("Before After Presentation", "Before After PDF") }
  

  in other words, you call Actions loaded into ActionSets - if they are not loaded, your calls fail.

  I strongly support the advice of Chuck. If you have done the actions, or in any case if you have stocks yourself, you could automatically convert it into javascript using script xbytor ActionToJavascript.jsx (find xtools download here on SourceForge). Then put the code and just call these functions, no need to have users install actions more (and by the way, your code will be a little more watertight).

  Hope this helps,

  Davide Barranca

  ---

  www.davidebarranca.com

  www.cs-extensions.com

• install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

  having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

  error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

  I managed to install the software on my laptop using windows 7.

  spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

  have tried to install it on the internet from the site of epson, but same error

  any help would be greatly appreciated

  < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
  Do you mean that you have downloaded the Epson driver?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

  Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

  If that wouldn't work, try to run the System File Checker:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

• Photosmart C4795: Solution Center cannot run because your installation of the device is not complete

  Months after HP software reload to correct a mistake, I lost my HP Solution Center during installation.

  Today, I ran the utility HP Print and Scan doctor and downloaded the software to install the HP Solution Center, but the following error message:

  HP solutions Center can not run because your device installation is not complete.

  I want to set up a wireless printer connection.

  Appreciate your help.

  Jean,

  It was quite a process, but everything seems to work well!

  I just rebooted my laptop, and now I have the HP Solution Center!

  The error message that I mentioned in my previous note seems to have disappeared (I hope never to reappear!).

  The question that light that I see is that the HP Support Assistant is always located on my taskbar.  How can I get rid of this?

  I can't thank you enough, John, for all your help and advice!

• Restore complete PC - either does not start or before restoration, said "the disk is defined as active in the BIOS is too small to recover the original system drive."

  I am trying to restore an image backup Vista 64 is 428 GB, the drive under restoration is a Velociraptor 2x300GB RAID 0 (about 558 GB under Windows), and the drive on which the image originated was is labeled as a 750 GB drive (actually about 698 GB / 433 GB used). When I first made the attempt I got some message on the target drive, have to be cleaned by diskpart, so I did. After that, I was able to complete the restoration - but after the restoration, at startup, I get the message:

  "Reboot and select proper boot device or insert boot media in selected bootable media and press a key.

  And under Windows, the drive does not appear. Disk Management displays the disk as unallocated space. So I added a new Simple Volume and then tried the new restoration. But now I get the message:

  "The drive is set as enabled in the BIOS is too small to recover the original system drive."

  Even if the restore completed successfully after cleaning, the drive is empty, and the player has more than 100 GB more space than the size of the image. After the restoration after the own, why can't it detect the boot sector; and if I try to restore after formatting, why do we say that the disc is too small? How can I successfully restore?

  Hello

  We can see the suggestion of Ryun on the link below and check if this helps solve the problem.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/9a968d83-Ca5a-4a71-85e2-a013d209c713

  See also:

  http://TechNet.Microsoft.com/en-us/library/cc754015 (WS.10) .aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Speech recognition is not all sounds during installation of the wizard.

  Sound recorder works fine and I can record, save and play wav files.  CLS recognition requires all upward before use and the recording meter bar moves I read the sentence of the sample.  After that, I get the error that SR couldn't hear anything.  Help please.

  Hi BTKpickle,

  Welcome to Microsoft Answers Forum.

  There are several possible causes of the problem:

  ·         The microphone isn't close to capture your voice. Make sure that the microphone is positioned close enough and you speak directly into it.

  ·         The microphone is cut in. Some microphones have an external control for muting. Make sure that the mute control is disabled.

  ·         The microphone input level is too low. Make sure that the microphone input level is set correctly.

  Entry level to adjust the microphone

  1. Open Audio devices and sound themes by clicking Start , clicking onto Control Panel, hardware and sound, and then clicking its.

  2. click on the recording tab.

  3. double-click on the microphone you are using speech recognition.

  4. click on the tab levels and then use the slider to adjust the entry level for your microphone.

  ·         The microphone connections are not properly attached. Make sure that microphone cables are intact and unbroken. The connections to the computer can be loose, so unplug the wires and reconnect them by ensuring that they fit.

  ·         A different microphone is selected to be used with speech recognition. If you have more than one microphone installed on your computer, that bad could be selected to be used with speech recognition. Make sure that you use the microphone selected for speech recognition.

  Change which microphone is used with speech recognition

  1. Open Audio devices and sound themes by clicking Start , clicking onto Control Panel, hardware and sound, and then clicking its.

  2. click on the recording tab.

  3. Select the microphone that you want to use with speech recognition, and then click set as default.

  Check the documentation that came with the microphone for additional troubleshooting information.

  See if you are able to complete the installation wizard.

  For solutions to common problems with Windows speech recognition, see

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• New virtual machine insists on starting network before installation of the OS

  I used VMWare ESX, but am relatively new to VMWare workstation and completely new for v6.5.

  My host is a new Dell Studio 540 Core 2 Quad, loads of disk space and 6 GB of RAM, host operating system is Vista Home Premium SP1

  VMWare Workstation v6.5.2 using build 156735, bought vmware.com online.

  The problem I have is that when I create a virtual machine and try to install XP Pro, he insists on trying to boot from the network.

  Start-up of AMD Am79C970A NET
  & lt; copyright info & gt;
  CLIENT MAC ADDR: 00 0c 29 5th C0 E4 GUID: & lt; GUID follows & gt;
  PXE - E53: no boot file received
  SME - M0F: Exit Intex PXE ROM
  Operating system not found

  I confirmed that the NETWORK adapter in the virtual machine has two 'connected' and ' connect at power on "checked.

  I tried to get into the BIOS, the CD is the first in the list, the & lt; SHIFT + 1 & gt; instructions to disable the network boot option does nothing.

  I'm tempted by using two physical media in the CD player a .iso, no luck.

  Can someone tell me where I'm wrong here?  Hope I've provided enough information.

  Thank you

  Happy that you guessed it sorted.

  > I hate being a new user, it's humbling.

  Yes, you are. Life seems to be a constant progression of: freshman to high and then back to freshman again.

  Lou

• need to run php script before kicking in the component Flash

  I have a slide show Flash component that uses an xml file to load the images. The xml file, however, is created dynamically when the user selects what slide show they want to see. How to run the php script until the component slide show has a chance to get him? It starts usually as soon as the .swf is executed.

  Thank you

  Chop

  Drag the slideshowbox Panel components on your stage and delete it (so you have it in your library).  check its properties and make sure that his class is SlideshowBox.  If this is not the case, use the appropriate class name:

  var aSlideshowBox:SlideshowBox = new SlideshowBox();

  addChild (aSlideshowBox);

• Now updated for Win6/XP to Win7, programs do not run as before.

  Hi all. Two main problems. Has been talked about in the update since Win6 to Win7, which I had done by a professional, but now 1) my Nokia (N95) mobile phone is not able to send photos or data on my laptop, with my cell saying "Sending failed", even if my laptop recognize the my phone & BT also 2) when I try to play games even simple as "Freecell". , "Hearts" or "Spider Solitaire" the game says "Hardware acceleration is disabled or not supported by your card video driver" and then play so slowly as he's stuck in the wet concrete.
  Any suggestions on how to have my laptop running as beautifully as he did with Win6/XP?
  Thank you, Jenny.

  Hello

  See the link below:
  Bluetooth devices do not work correctly on a computer that is running Windows 7
  http://support.Microsoft.com/kb/980396
  Let us know if that helps.

• Run script .jsx and/or the Actions button in HTML extension?

  Hi all

  I'm quite a novice at things .js, .jsx, and HTML.  I use scripts of JSX one former co-worker created and Photoshop actions for many years.  I looked through and have managed to modify the JSX scripts with a few minor changes, but that's all.  Using the Configurator, I created a custom for use in CS6 Panel.  We are moving finally CC2015 team and I'm the only person in our team who has experience and/or desire to convert compatible with CC 2015 Configurator easily created CS6 bench.  I got all of the HTML developed, interface extension runs within Photoshop and I have the buttons either launch an alert or by creating a new document in Photoshop.  The function of coding was all found code.  Now I need to figure out how to make these buttons work our various actions and some to run our scripts JSX.

  
  Configurator makes it is easy to select a button and tell it to perform an action or launch an external script file.  Is there an easy way to do this now using actions and JSX files that we have already created?

  And just a reminder, I'm a NEWB, so take it easy on me... if possible. In addition, it is only a sign used internally so I need power to market/sell it.  This is specific to our company of workflow and needs.

  Thank you!

  SMM

  for stocks, you can use this command

  ---

  Application.doAction (action: string, to: string)

  Object Adobe Photoshop CC 2015 library

  Playing the action specified in the Actions palette.

  Action: Data Type: string

  The name of the action to play. (Note that the action name is case-sensitive and must match the name in the Actions palette).

  of: Data Type: string

  The name of the action set that contains the action being played. (Note that the defined action name is case-sensitive and must match the name in the Actions palette).

  ---

  Make sure they are loaded in photoshop

  Another way is to convert action scripts (I see people often using this tool http://www.tonton-pixel.com/blog/scripts/utility-scripts/convert-actions-file/)

  and run the scripts, you put them on the .jsx file, where they will be evaluated, if you used standard mat and then call them by the name of the function

  I suggest you check out the samples, if you still have questions

• not run qtquick 2 application to the bb10 device

  I have download Qt 5.0.1 git and build for BB10 as statement: http://qt-project.org/wiki/Building-Qt5-for-Blackberry. I also download Qt Creator 2.6.1 for Mac. But when I deploy the peripheral packge and run, the error prompt:

  main.qml:1:1: module "QtQuick" is not installed
       import QtQuick 2.0
  

  I use the Blackberry Qt Quick 2 Basic application model to create the helloworld.

  .pro file

  TEMPLATE = app
  
  QT += qml quick
  
  # Additional import path used to resolve QML modules in Creator's code model
  QML_IMPORT_PATH =
  
  # The .cpp file which was generated for your project. Feel free to hack it.
  SOURCES += main.cpp
  
  OTHER_FILES += bar-descriptor.xml \
                 qml/main.qml
  

  bar - description.xml

  
  http://www.qnx.com/schemas/application/1.0">
      com.example.qtquick2
      qtquick2
      1.0.0
      DESCRIPTION
      
          none
          false
          true
          landscape
      
      PUBLISHER
      COPYRIGHT
      
      
      
      -platform
      qnx
      run_native
      qtquick2
      qml
      
      lib
      plugins
      imports
  
  

  Any suggestion is appreciated. Thank you.

  QtQuick 2.0 cannot be * officially * supported, but it works (for the most part).

  A couple of notes

  • Use QML2_IMPORT_PATH instead of QML_IMPORT_PATH in Qt 5.0
  • Make sure you have the plugin QtQuick 2.0 (QtQuick.2) available via QML_IMPORT_PATH. After compilation, you'll find them under /qml/