KB 2633880 mutiple facilities HAVE OCCURRED

Similar Questions

• Error 550 continually pop report "some mistakes have occurred etc." can't stop it

  Send an email to a closed account, a pane opens that says: "some mistakes have occurred etc." gives me an error message 550 & said the message could not be sent to this email address. I can't stop poping up error message to the top whenever I have an incoming or outgoing message.

  [Moved from comments]

  I use Outlook Express on Windows XP.

  Thank you. I've moved the question to the XP forum - email and communication.

  Don

• Error: "some errors have occurred during the processing of requested tasks". Sending emails from Outlook Express

  Original title: Repetitivet sending emails from Outlook Express

  When sending emails from my Outlook Express , the following occurs:

  (1) as usual, send the message falls into my Outbox and begins to be sent.

  (2) when the message was sent, I get a message that "some errors occurred while processing requested tasks" but no actual errors are displayed.

  (3) the sent items folder does not show that a message has been sent... but a message has been sent.

  (4) the original message remains in my Outbox and will be sent over and over again.

  As you can imagine, it's a very embarrassing problem.  All suggestions are welcome, but please keep the instructions clear and simple.

  Ed *.

  Hello

  Windows XP Service Pack 2 is installed on your computer? To work on this question, see these steps.

  It seems that there is a corruption of dbx file.

  I suggest you go over your messages out of the Inbox, and then create new folders Outbox and sent items after you move the messages you want to save to a local folder that you create.

  Reference:

  (a) click onTools

  (b) thenOptions

  (c) selectMaintenance

  (d) Record Store will reveal the location of your Outlook Express files.

  (e) Note the location and navigate on it in Explorer Windows or, copy and paste to start and select run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden.

  To view these files in Windows Explorer, you must enable Show hidden files and folders

  Reference:

  (a) clickStart

  (b) Control Panel

  (c) Folder Options icon

  (d) notice, or in Windows Explorer

  (e) Tools

  (f) the Folder Options

  ( viewof g).

  With Outlook Express closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open Outlook Express.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Reference:

  (a) clickOutlook Express at the top of the the folder tree so no folders are open.

  (b) click onthe file

  (c) work offline (or double click working online in the status bar).

  (d) file

  (e) file

  (f) compact all folders. Wait for the compaction to complete.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend about a300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Compact often as specified above.

  Reference:

  (a) in the Tools

  (b) selectOptions

  (c) maintenance:

  (d) uncheck Compact messages in the background and leave it unchecked. (N/a if running XP/SP2).

  And backup often.

  See also: error messages when you send and receive in Outlook and Outlook Express http://support.microsoft.com/kb/813514

  An Outlook Express basic repair kit

  http://support.Microsoft.com/kb/2398839

  Hope the information is useful.

• The endangered network devices / system 58 with Net View error - something "randomly" seems to have occurred to my network 2-3 days ago

  I am running Windows 7 Ultimate 64 bit on a Toshiba laptop computer on a network that also has a Synology Diskstation 710 +. There are other Windows 7 machines that continue to work perfectly with the NAS. My LAN is only small, so I run a working group called "WILF" owned computers and NAS.

  Until 2 days ago, everything worked perfectly and had been stable since the SIN happened more than six months ago. Then:
  -J' noticed that he was missing the NAS drive (which normally appears as "DISKSTATION" under "Network" in Windows Explorer).
  -Backup software was still able to access the drive normally.
  -I could manually create a connection to the drive in Windows Explorer by typing "\\DISKSTATION" into the address bar, which worked well.
  -Of course, I could ping the device, and I have confirmed that it is correctly in the my network router routing table. It has a static IP address in a reserved area.
  -L' other computer normally on the same LAN is a workstation running the same version of Windows, no problem.
  To try to find flaws, I went in the command and ran 'Net View'. The spokesperson system:
  "58 system error has occurred."
  I used the other workstation to confirm no problem with a network browser (in fact when writing the workstation is the master proposed stand-alone browser).
  Review of other forums, I saw references to Group Policy editing, etc. But (a) I already have pretty much everything these game settings they describe, but more to the point (b) I am a firm believer that computers do not start at random to behave differently, everything that happens all of a sudden started - network settings, group policy, IP addresses, the names of devices etc... None of this has changed. I find myself thinking that there cannot be a settings issue given that the parameters have been very well three days ago. However, there no obvious "triggering event" visible to me - so I wonder if a recent Microsoft patch (for example, a security patch) that auto-updated itself on my system has caused this.
  Any thoughts? Clearly, something went wrong, and I think even that relative layman I have to assume that low level network commands are not working is probably related to the fact that I can't see certain features in the Windows Explorer window.
  Help appreciated.
  Thank you.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information helps.

• Why does OE removes access to jpg files when it is attached to my emails? This problem has just begun have occurred.

  Emails with attachments, other than "jpg" format, parts are still available to be open and used as usual. Recently, when double clicking on emails received with an attachment icon 'trombone', those who have included jpg attachments have the addition of a yellow band clear to the top of the box "drop down menu" where are the words, "OE removed access to the following dangerous attachments in your email. He then proceeds to identify the names of deleted either spare file ""-. "" jpg ".

  Therefore, I am unable to open attachments

  I find that Word and PDF files are not affected in the same way and opens and used normally.

  I use Outlook Express 6 and Windows XP.

  Did you just install update which have been around for a long time? If you click on this 'yellow band' the attachment opens

  To end the problem everything: tools | Options | Security. Uncheck: «block images...» "and"do not allow attachments... ". ».

• Windows Mail - "a few errors have occurred during the processing of requested tasks"

  I get a window every time I have bring to the top of the box mailbox Windows that indicates that 'the host 'YAHOO' could not be found. Check that you have entered the server name correctly - the Yahoo Acct. "Protocol: Pop3, Port: 110, secure (SSL): no, SocketError:1101, error number: Ok899CCCOD.

  There are displayed (hide) (cancel) (Review) boxes which do not appear to cause the return of this particular window to solve.   When I click on 'Review' there is another window appears which States "1 of 2 tasks are completed properly" when I click on "Hide" the window closes but will repeat whenever I visit the Windows Messaging page.  I've not been able to find an answer to this situation, although I did a lot of research to help and support without result.

  You will appreciate any useful info that can clear up this episode.

  Hello RenoMac1,

  Solution: -.
  In all likelihood, your mail server does not work. The ISP (or internal it Department) brought the server for maintenance. Perhaps the server was interrupted due to other problems, or there is a problem with the connection.

  There is really nothing you can do but wait, and keep trying. If the problem persists for a long time, you can call your ISP (or internal it Department) and find out if there is a problem. You can usually find out if it's a connection problem trying to access the World Wide Web using your browser. If you can access the Web, you can assume the connection is good, and the problem lies in the server. Some access providers offer network status reports on their Web sites. You can see the status page of the network on the Web site to see if the ISP knows the problem and is working to fix it. If this is not the case, call your provider and find out if this is a known issue. In most cases, the problem is on the side Server and not with your PC, and you have to wait for its resolution.

  --

• Windows Live Mail a few errors have occurred during the processing of the task. Please see the list of errors below for more details.

  How is it, I always get this message every time I check my e-mail. On the one hand there are no errors below. Is there a way that this error can be fixed? If so, how?

  Windows Live Mail has its own support forums at the Windows Live Solution Center . Ask any question you may have in any of the forums on the right side of the this page. You will probably be asked to give your version of WLMail and Windows so that the answer may be more accurate. In WLMail to find your version of the software, a press on ALT - H. If it doesn't show you the version and the build number, press on escape to two times, and then Alt - F B.
  It would be useful to know a little more about the problem. Do all tasks in case of failure, or perhaps only the first on the list? Each time I check my e-mail address means whenever you click send/receive (or Sync, according to version)? Or maybe only every time a scheduled send/receive takes place?
  There is a bug in WLMail 2011 described by Peter.R shortly after he was released a year ago: a shipment / automatic reception fails on behalf of the city in the first place the mail in the task list if the include this account when checking for new messages is selected for a news account. To work around it, right-click on the name of the news account in the folders pane, select Properties and uncheck the option on the general tab, delete the account can make things worse.

  Noel

  updated information hit. Windows Live Mail forums are just around the corner under Windows Essentials

   

• After you have installed the latest updates of windows for Office 2007, I am unable to open any of my Office programs. I am running XP Pro SP3.

  I deleted the update that caused the problem; specifically, 972581. tried to run repair on the programs; Looks like a reinstallation does not work.
  Office 2003 is not affected.

  Try a direct download of 2 of them and read on the 3rd. http://www.Microsoft.com/downloads/details.aspx?FamilyId=d20004c5-dd01-459e-8120-5f127e20c085&displaylang=en

  Update of security for the viewer Microsoft Office Visio 2007 (KB973709)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=EC802723-F2B2-400A-A24D-8D8D9092F9EA&displaylang=en

  Update of security for Microsoft Office System 2007 (KB974234)

  http://support.Microsoft.com/kb/972581

  Info on KB972581

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Read this if your error Code 646, including all positions and solutions offer to this thread link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2

  Read the info on the above link to error Code 646.

  With the compliments of: David_O - Support Engineer

  This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2

  Method 1: Save the Windows Update files

  1. click Start and type notepad in the box start the search .

  2. click on Notepad in the programs list.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on the file menu, click on record under .

  2. in the list record under , click all files .

  3. in the file name box, type register.bat .

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then click run as administrator . Collapse this includes this image if you are prompted for an administrator password or a confirmation, type the password or click continue .

  6. try to install the updates again.

  Method 2: Download and install Windows Update agent

  For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:

  949104

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Please rate me upward if you find my post helpful. Thank you!

• I may have misunderstood sync?

  I may have misunderstood the concept of synchronization, but my problem is that I had synced my browser on my first computer (not any other computer) and then I wanted to sell my computer so I deleted all the data and has sold. A few weeks later, I bought a brand new computer and tried to synchronize my data (bookmarks, websites, etc.), but nothing has synchronized. So I guess my question is should my info etc have occurred somewhere in your servers guy or do I have to have two or more devices sync between them?

  If you did not "disassociate" Sync before you delete all your data from the old PC and were connected to the internet, your data was probably wiped from the sync server as it has been deleted - depending on how you have disabled these data.

  What was the latest version of Firefox that you used on the computer that you sold?
  And what version of Firefox do you have installed on the new computer?

  Firefox 29 was a new version of Sync, which had Firefox 28 major changes in the mode of the synchronization. 29 Firefox also required the user to update their account of synchronization.

• Vista recovery file. In some ways, I put the files in there, and now I have problems. I've been able to get to where I could see the files but I don't know what those delete or move.

  If someone had a list on the files that belongs in the recovery file, that would for sure. I see some of them at the date of the file. Maybe someone can help me with that. Vista is the computer on which I work. He went down to where he would go and I restored it back then I couldn't he did it again. Thank you. Chuck

  Hello

  By "file recovery", you mean the recovery Partition?

  Who was photographed by the manufacturer of the computer's hard disk and there is nothing to do with Windows or Microsoft.

  It is general information on the recovery Partition:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To fix any problems that have occurred with the D: Partition Recovery, you need to contact the manufacturer of your computer to remove everything that was added on.

  See you soon.

• My dvd/cd burner won't recognize when I insert a disc. I use cd - r and try to do a picture disc. When I select burn it asks me to insert a disc, but I already have one inserted.

  When I try to burn a disc burner image will not recognize that I have a disc inserted and it asks me to insert a disc.

  This issue would have occurred after you installed, uninstalled or updated a program or Windows Vista.
  You can open the link http://support.microsoft.com/kb/314060 click the FIXIT button that should help you.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  I hope that this problem could be solved soon!

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why I can't open my email to _ @_. ___. message indicates an unknown error has occurred and umber POP3 Port 995 error 0X00CCC0E

  When I try to connect to my yahoo email account I get this message: a few errors have occurred during the processing of these tasks. The connection to the server has no protocaol POP.mail.yahoo.co.uk Server POP3 Port 995 secure (SSL) Yes, error 10061 0X00CCC0E socket error number

  If I go online via google I can access my account by the yahoo site. works well

  Angela

  When I try to connect to my yahoo email account I get this message: a few errors have occurred during the processing of these tasks. The connection to the server has no protocaol POP.mail.yahoo.co.uk Server POP3 Port 995 secure (SSL) Yes, error 10061 0X00CCC0E socket error number

  If I go online via google I can access my account by the yahoo site. works well

  Angela

  You pay $19.95 a year subscription to upgrade to Yahoo! Mail and.

  You can then configure Yahoo! Mail Plus in Windows Mail.
  The correct settings are...

  

  

• Slow performance after you have reinstalled the computer

  Original title: PC Performence question

  Hi, I reinstalled Windows 7 Home Premium 64 - bit a week ago and for some reason any when I installed this time, it made my PC slow for some reason any. My PC is mainly a PC game and while playing games my FPS is so low that the PC is designed for. My specs of my PC is: Intel Core i5 4670, 8 GB of Ram 1600 Mhz, ASUS B85M-E / CSM Motherboard, EVGA GeForce GTX 960 FTW 4 GB, 128 GB SSD SP600 ADATA, 2 TB Western Digital Caviar Green, Cooler Master eXtreme Power Plus 600W. This question has never happened before, I have owned this PC for 2 years now and never stumbled upon something like that. When I run something like Windows Update my PC returns to the State, it should be, but after its been check updates and my PC is back to having problems. I use a program called "Razer Cortex' for my PC back to what it was before all these problems began to occur. I think some thing in the process systems are realize these questions, but I'm not sure. I would really like to have a fix for this problem to my PC that she had a few weeks back.

  Hello

  Please contact Microsoft Community. I've surely you will help solve this problem.

  This problem might have occurred because of these reasons:

  1 conflict between third-party applications.

  2. for many programs that are configured to start automatically when Windows starts.

  Try the steps listed here:

  Method 1:
  I suggest you to run System Maintenance troubleshooting and check if it helps. Resolution of the problems of System Maintenance are looking for unused files and shortcuts you can clean or remove so that your computer can run faster.
  Open the troubleshooting of System Maintenance Utility
  http://Windows.Microsoft.com/en-in/Windows7/open-the-system-maintenance-Troubleshooter

  Method 2:
  If the problem persists, I suggest to start the computer using safe mode and check if it helps. If so, the value of the computer in a clean boot state and check if it helps.

  Step 1:
  To start the computer in Mode safe following the procedure described in the link. At the start of the computer Mode safe with the minimum set of drivers and files.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Step 2:
  We will define the computer in a clean boot, if the issue occur not in Mode without failure. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.
  How to perform a clean boot in Windows
  https://support.Microsoft.com/en-us/KB/929135

  Warning: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 3:
  If the problem persists, I suggest to try the procedure described in the article that willoptimize Windows 7 to speed up performance optimize Windows 7 to speed up performance optimize Windows 7 to speed up performance optimize Windows 7 to speed up performance. Check if it helps.
  Optimize Windows performance
  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Caution:

  1. Disk Cleanup cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.
  2. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you more.

• Center solutions HP, reboot needed, every time, I have connection to windows, even when the computer restarted.

  Hello

  I have a desktop HP Pavilion p6-2102edm.

  Windows 7 x 64 Home Premium

  Around 0:05 AM GMT, errors have occurred. HP Solution Center asked to restart the computer. It was the first time, right now, I thought that's probably maintenance, so I restarted my computer and he returned once again, without ever showing the icon Solution Center HP on my taskbar, just a notification bar to come, needing a reboot. He was stuck in this routine.

  Now, after the restart for the fifth time, I get very frustrated and unable to understand the cause of this problem...

  The only thing I could get out of it, as as I do as a study of game development is that there is a NullReferenceException thrown, but in addition, I am at a total loss, I hope someone can shed some light on this...

  ------------------------------------------------------------------------------------

  My Windows application event logs / are evidence of this.

  Level: Date: Source: event ID:

  Services customer HP WARNING 11/27/2012 01:17 0

  The description for event ID Services 0 HP source customer is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Received unknown service request.

  -------------------------------------------------------------------------------------

  My of Application and Services/Hewlett-Packard event logs show that.

  Level: Date: Source: event ID:

  Error 11/27/2012 01:04 HPSF.exe 2000

  Error HP ID:-2147467261 at HP. SupportFramework.Utilities.CustomerExperience.HPSASession.AddNavigationProperties)
  Message: The object Reference not set to an instance of an object.
  StackTrace: At HP. SupportFramework.Utilities.CustomerExperience.HPSASession.AddNavigationProperties)
  Source: HP. SupportFramework.Utilities

  Name: HPSF.exe
  Version: 07.00.01.01
  Path: C:\Program Files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Format:-en-US
  RAM: 6124
  Use of the RAM:
  TargetSite: HP. SupportFramework.HPSFReporting._Property [AddNavigationProperties()]

  Kind regards

  Tolga Kavi

  Hello

  I recommend you to download the latest version of the HP Support Assistant software on this site:

  http://www.hp.com/go/hpsupportassistant.

  Then, uninstall the Add/Remove programs function HPSA and install the latest application that already download you it from the link above.

  This should fix the problem for you.

  Thank you

• Cannot access other homegroup files, error "you might not have permission to use this network resource".

  Help

  I have two laptops 7 Home premium to windows. I created a home group. A computer can see and access each other, the other cannot see, but cannot access the other. When I click the icon from the other laptop, I get the error \\pc is not accessible. You might not have permission to use this network resource...

  I checked the password, name of House Group, sharing and discovery of parameters already and everything seems to work. The only antivirus on both computers is microsoft security essentials.

  What should I do?

  Hello

  Please contact Microsoft Community. I understand that you have a problem with access to shared files from other computers on homegroup. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem might have occurred because of these reasons:

  1. Permission problem.
  2. Incorrect settings.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest you to run the troubleshooters of shared folders to automatically find and fix some common problems.

  a. open the shared folders convenience store by clicking on the picture of the Start button Start button and then click on Panel.

  (b) in the search box, type Troubleshootingand then click Troubleshooting.

  c. under network and Internet, click on access shared files and folders on other computers.

  Method 2:
  If the problem persists, I suggest that return you the item and make sure file sharing permissions are set correctly.

  File sharing essentials
  http://Windows.Microsoft.com/en-us/Windows/file-sharing-essentials#1TC=Windows-7

  Note: try the steps that you have not tried before.

  See the article for more information.

  Why can't I access my homegroup?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.