KB2749655, KB2724197, KB2661254 und KB2756822 updates

Similar Questions

• Windows Vista Impossible to check updates

  My computer is unable to check the updates seems to be stuck configuration update June 19, 2012. I tried the fix tool but no error code 80080005 successshows ideas please?

  Fact: Applications, (Norton and McAfee) are known for do not uninstall or upgrade properly. The 'leftovers' Norton is the most likely culprit here. Roll up your sleeves & cross your fingers...

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT-don't SKIP ANY STEP online & to perform all the steps in a 1 session uninterrupted - to allow a minimum of two (2) hours!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3A. restore backups of ARO Advanced repair all (if any), and then restart.

  3 b. Uninstall ARO Advanced repair 2011 [Yes, even if you paid for it!] & restart again. [1]

  4. After completing some you have a copy of your key of handy product, uninstall Norton 360 and LiveUpdate and all Norton Add ons via Start | Control Panel | Programs: Programs and features.

  5 IMPORTANT! -Online enable WF immediately after the reboot!  [Should be automatic, but I want you to check.]

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!

  6. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

  7 do a clean install of Norton 360 Version 6.x (using your product ID, if need be; the upgrade is free) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  8. manually and repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.

  9. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [2]

  Note: Good for IE9 & IE7, too.

  9. right click on the file downloaded in # 9 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  9. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 9 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  10. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [3]

  11. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  12 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  13 reset once more.

  14. download Adobe Flash Player v11.4.402.287 installed. Open Internet Explorer (ONLY!) to this page-online http://www.adobe.com/go/getflash

  Beware of the pre-selected options to install unwanted third-party software (e.g., McAfee Security Scan Plus;) Google toolbar; Google Chrome).

  15. your version of Java is badly outdated & submitted to thousands of security vulnerabilities. Download Java Version 7 update 9 installed & all previous versions (for example, v1.6.0_33) removed as soon as possible!  Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46326

  15B. When finished, remove your Java cache by http://www.java.com/en/download/help/plugin_cache.xml

  16 restart one last time, then run a manual check of updates & see if you manage to install all Security updates offered (e.g., KB2744842, KB2724197, KB2661254 & KB2749655); Follow all the instructions.

  17. in response to this post with a status report.

  Good luck!

  TIP: Consider upgrading to Firefox v16.0.1 or just uninstall Firefox.

  =========================================================
  [1] injudicious use of registry cleaners can play a role here. TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  [2] trust Source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [3] after that we ended up this thread, do not hesitate to reaffirm Firefox as a default if you wish.

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• I have a problem with Windows Update instalking.

  kb2756822 fails to download... kind regards

  original title: kb2756822 fails to download d

  Hi Gary,.

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the installation of the updates on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) is limited to kb2756822 update?

  (2) what is the exact error message or error code?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Method 1 and 2 provide for changes in the registry. Save before continuing.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058#top

  Method 2-

  I would have you look at the article-

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Note: Make sure that get you the computer to a Normal startup after performing all the troubleshooting steps.

  Make sure that you back up the data on the computer before you continue.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Battery - background activity to App Store

  I know that the last thing that needs Community Support of Apple is another complaint of battery, however, this case appears to be different then all the others that I've seen here and I am completely baffled.

  Just within the last 48 hours, my phone has been draining the battery faster then normal.  I have not modified the special parameters that would have affected this.  I kept an eye on what the parameters of the battery said uses my battery the most.

  Earlier, I noticed that after only be awake for 4 hours today (with virtually any phone use because I'm at work) my battery is at 18% already and the phone feels hot.

  Some information more: my job is not a WiFi for us to use (sh * t I know) so I manipulated strongly what applications use data because I often go to my data plan 4 - 5 times per month (AT & T *)... in any case. I have the cellular data disabled for the purposes of the App Store, but, when I checked my battery today use to see what happened to drain my battery so quickly, that he showed to 4.2 hours of use of the background.

  I tried soft - reset my phone, and am probably going to try restore later today, however seem to help anything.

  I really try to avoid going to the Apple Store to get it checked since the Mall is on the last place on Earth, I want to be right now.

  Any suggestions?

  Also disable auto downloading music, apps, books und app updates in the settings/iTunes & AppStores?

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the phone.

  If the battery life goes back to normal, the restore to the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Error: E_FAIL (0x80004005)

  Beim update auf Windows Vista SP2 wird der Fehler paper "Fehler: E_FAIL (0x80004005)" displaying und das Update kann nicht installed werden.

  When you perform the update to Windows Vista SP2, the error "Error: E_FAIL (0x80004005)" and the update cannot be installed. "

  Hi rfiebiger,

  Thank you for using answers Forum.

  You use a boot loader, such as GRUB?

  If you are, I suggest to Vista partition active whilst performing the update.

  If this is not the case, try to temporarily disable your antivirus program while performing the update.

  Please let us know if that helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe Premiere Pro.exe - Anwendungsfehler (0xc0000142) / After Effects CC das invaluable

  

  Yes beauty are aus, habe already 3 wrong den PC neu läge.

  Alle Treiber und ERST updates installed, creative cloud, first, After Effects sowie go nicht danach die!

  Was soll ich machen, ich meine ich bezahle ja die CreativeCloud und kann schon eine Woche lang nicht Produkte die

  Benefits, obwohl ich dringend thankyou to you. (Semesterarbeit)

  HILFE!

  --------------------------

  PC: Windows 10, AMD Phenom II X 6 1090 t. / 16 GB RAM / GTX770 / ASUS M5 EVO - vor zwei Wochen lief noch alles super A99X, jetzt nicht.

  Hey Roman.

  Faith yesterday wird der support nur auf English day.

  Habe das same problem und schau wie ich habe found was:

  Help! Premiere and After Effects do more start. (0xc000142)

  Habe die 2 steps gemacht und Auntie. So are.

  Habe auch mein PC neuinstalliert usw.

  Hope're klappt auch bei dir.

  Viel Glück

• The cursor keys are not properly changing to the next/previous image

  In recent days, one of my two computers-Lightroom shows a bug quite boring, standing, on the cursor left/right keys:

  It happens to the magnifying glass:

  When I press the right cursor button, Lightroom does not change to the next image

  Instead, it does not change to the next image, before it reaches the end of the file .

  At the same time with the slider to the left, which always takes me to the first image in the folder...

  Navigation in the Loupe is almost impossible, just the mousewheel still lets you change to the next/previous image.

  This happens for all the sets, catalogs, folders, etc. If I have a choice, so it takes me to the image of first/last of the selection, nothing between possible.

  All the advice, what was wrong with my system? Everything was good a few weeks ago, and everything works fine on my other computer, which has just the same behavior...

  Thanks for the tips!

  Harald

  After hours of tests, I identified the reason:

  The issue has been raised by the service «skdaemon.exe»

  It's supposed to be a utility enhancing keyboard, which was preinstalled (und later updated) on this computer.

  After disabling (from autostart), LR works very well once again, and I did not notice the missing keyboard still works.

  Maybe this helps someone else to circumvent this problem and thanks for the support.

  Harald

• KB2724197 updated in windows 7 Pro - XP Mode causes one of my DOS programs do not see expanded memory the program needs

  Hello

  When I run the program BACK without the update of KB2724197, my program sees 4 megabyte of memory paged.

  After installing it, my program sees only 130 k of memory convensional.

  So what's this KB update?

  Thank you

  Len

  The fix for the issue of the missing UMB was released today for Windows XP and Windows 2003.
  Here is the link:
  http://support.Microsoft.com/kb/2785487

  Thank you for your patience.
  Thomas Gschwandtner

• Security update for Windows XP (KB2724197) is constantly updated.

  I have updated several times, but it is all a few minutes.  It shows the 0Ko so I don't understand what is happening.

  Thanks for asking! As I understand it, the update for Windows XP (KB2724197) keeps popping up on the computer. I suggest you follow the troubleshooting steps to check if this may help.

  1 - is the issue only an update?
  2. don't you make changes on the computer before the show?
  3. you receive an error message on the computer?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Perform a clean boot and check if the third-party software are causing the issue of updating.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 3:
  Manually, try to install the update and check.
  Update security for Windows XP (KB2724197)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=34845

  Method 4:
  You can try the steps in knowledge base article and check.
  Windows Update or Microsoft Update repeatedly offers the same update
  http://support.Microsoft.com/kb/910339

  Method 5:
  If the above steps you perform the steps in knowledge base article and check.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  You can perform a repair installation will not damage files and applications that are currently installed on your computer. To be on the safe side, I suggest you to backup your files before that you were going to repair the installation.
  Check the link for the backup files.
  http://support.Microsoft.com/kb/322756

  Just reply with the results. I'd be happy to help you further.

• After you have installed the KB2707511 and updates KB2724197, error in execution of NTVDM.exe.

  Original title: problem with KB2707511 and KB2724197 updates.

  When you enter a DOS program I get a failure of execution of NTVDM.exe. Remove these updates restores normal operation. Anyone know if there are risks in doing this?

  Hi LeRoy,

  If I understand correctly you will receive an error by, NTVDM.exe running, after having installed the updates KB2707511 and KB KB2724197. However once you uninstall the updates, the problem is resolved, is that correct?
  I apologize for the inconvenience, please note that it is a known problem and Microsoft released a supported fix to help solve the problem.
  Please follow the links below to help troubleshoot-made the question.

  I suggest you reinstall the security updates that you uninstalled and then run the fix as suggested to solve the problem.

  KB2707511 and KB2724197

  MS12-042: Description of the update of security for Windows XP and Windows Server 2003: 12 June 2012
  http://support.Microsoft.com/kb/2707511

  According to the section more information under, known issues with this security update.
  

  
  

  The hotfix update is available,

  "NTVDM. EXE has encountered a problem and needs to close"error message when you use 16-bit applications in Windows XP
  http://support.Microsoft.com/kb/2732488

  Once you run the hotfix you can continue to install the rest updates normally.

  Please let me know if the problem has been resolved, or if you need additional help on the issue.

  I hope this helps.

• I can't install the update of security KB2724197, get error installation failed

  The yellow ball advising me that there is an update to install, appears where it's always on my windows XP PC.
  When I click on the ball, continue to the next step which says it's install, but then I get a message that the installation has failed.
  I tried to install the update of security KB2724197 at least 10 times without success.
  I rebooted, tried again and also checked for viruses and always without success.
  The yellow ball continues to appear.
  What is my next step, given that my PC is vulnerable to attack?
  Joseph

  Hi JosephR,

  In some other threads that I saw about problems with this particular update, the problem has been resolved with one of two things.

  First of all, I suggest you reset your Windows Components update.  Please take a look at the article below with the Fixit to do it for you:

  http://support.Microsoft.com/kb/971058

  If this does not help, the issue could also be caused by a rootkit on your system.  Please take a look at the similar thread below where the poster was able to resolve the problem through Taupo Tech by removing the rootkit:

  Cannot install Windows Update KB2724197, error FFFFFFFE

  I hope this helps!

• The KB2724197 update installs several times.

  Original title: kb2724197 update.

  The update installation continues even after a successful update

  Hello 66ken66,

  Which displays the best 2 articles.  Not all the top 2 pages...

  I need to have the code of failure-exception, as appropriate.

  To do this:
  Press Windows-keyboard, type

  Windows Update

  in the search box and press ENTER.
  At the top left, tap View Update history
  Navigate to each marked item as being down (for the month of October) in the status column.  Right-click on it, and then click Details.
  Then write down and the report here in the Details of the error Code displayed and the name of the item to update.

  PS Of course was that you did what is described in this article!

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

• Microsoft Windows 7 KB2724197 update fails to install on laptop HP Pavilion G7

  HP Pavilion g7 - 1033cl running Windows 7 Home Premium SP1 with all the previous updates applied

  With that of the road here is my problem.

  The 09/10/2012 when I stopped my laptop for the night, he told me it was going to install 14 updates of the OS. Usually this isn't a problem so I let him do his thing and went to bed. When I turned on the morning, he went through his usual thing to get updates. That night, when I went to bed he told me that he had 1 update to apply, so I let him do. The next night the same thing happened, he had 1 update to apply. That's when I checked and he tried to apply the same update from the previous night, in fact, he tried to apply 1 updates the 14 from 09/10/2012.

  It's already happened and the solution has always been to uninstall the update and reinstall them one at a time. It is time very trust because most of these updates will require a restart so to uninstall them and install their and it takes my laptop 3 or more minutes at the stop (my wife's cell phone bought at the same time takes less than a minute to stop, but I digress).

  If that's what I have to do is there a way to uninstall all these updates at the same time? (who will save me at least 13 reboots)

  Or is there something else I could try?

  BTW: If I try to install KB2724197 now it comes up with the message:

  Errors:

  Code FFFFFFFE Windows update encountered an unknown error.

  Get help with this error

  The "get help with this error" is interactive and takes you to a list of 30 options with all the known error codes (but not FFFFFFFE, I guess it's because we don't know).

  Any suggestions are welcome.

  I just want you to know that I found a piece of software that has removed the Alureon.A of my system.

  I went to Microsoft and serched on Alureon and got several hits I clicked on one that said how to remove Alureon. The link is http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/how-to-remove-alureon-a-from-xp/eef4fe74-5f51-41cf-9523-754911ade40e

  This has reported me Kaspersky TDSSkiller. I thought I had nothing to lose so I downloaded and executed. He pointed out that the Trojan horse called Pihar.C not Alureon.A but I did remove anyway and after a reboot no Alureon message more Microsoft Security Essenials. And the KB2724197 update is now installed on my laptop.

  Thank you for your help and I hope that this Information might help someone else in the future.

  TDSS Killer link is: http://support.kaspersky.com/faq/?qid=208283363

  Please add it to your box of tricks

  I'm just glad I don't have to do a complete reinstall.

• CC Updater App loads loads loads und und

  Hallo

  ICH kann meine CC program nicht mehr al weil die CC App loads except dem Loadingwheel nichts anzeigt und stundenlang nur.
  Someone no idea was breast konnte das? Internet etc. alles liegt (50Mbit und online). Software: Mac OS 10.11.2

  ??

  Danke schonmal
  Alex

  

  Hello

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

  You can also view the nets below where this issue has been addressed:

  Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

  Creative Cloud Desktop App taped blue spinning wheel after update.

• Seit dem last Update von Acrobat Reader im Dez. 2015 kann ich die Formularfelder nicht mehr und change edit. Gibt aren't dafur?

  Since the EGG really ich ein bestimmtes von einer Versicherung, um Initiativ all'acquirente Formular. Bisher dem Formular dafur want edited Felder und fun werden die durch. Auch eine Summenfunktion war included darin. Seit dem Update auf the current Version Acrobat readers unter Windows 10 funktionert das Editeren nicht mehr. Da're sich um die free Software-Version out, there're EIB Adobe dafur keinen support.

  Hi skydancer333,

  The PDF form is signed?

  Signed PDF form locks the fields in the form, then you will not be able to make changes in a signed PDF form.

  Kind regards
  Nicos