KB3069114 fails to download and install

Similar Questions

• Windows update fails to download and install updates and cannot start defender and windows firewall.

  Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?

  Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?

  Hi Speete66,

  ·         You receive an error message or error code in Windows Update?

  ·         What happens when you try to start the windows firewall and windows defender? You receive an error message?

  ·         You have any other antivirus software or protection installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2:  If the method above does not help, then you can reset Windows Update components and check.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• Windows updates fail to download and install the new

  Good afternoon

  I recently bought this satellite laptop computer pro on the package was both windows vista Home premium. I also decided to change fnsi at the same time. The provider also gives Norton Firewall Virus Intrusion etc etc.

  Microsoft does not validate my system but after that 2 hours on the phone with them and a system restore, they have agreed that I had bought some valid stuff and that fixed it.
  Now it seems windows updates icon appears ask me do I want to download and install.

  I do but every time, it fails, there are about 11 things that fail, no installation. I rang Microsoft today that they made one or tow things say but PC Toshiba's fault.

  Please, anyone had this happen to them and got the solution (s)?
  Please take into consideration that my knowledge of pc can be written on the back of a postage stamp. Do like me simple.

  Thank you

  Did you try to disable the firewall or uninstall Norton? Norton may block the Internet connection.

  If the provider uses a Proxy Server, you need to enter the proxy in Internet Explorer connection settings.

• Repeated (X 5 + weeks) failed to download and install SP3 WHP

  Download install & Windows Service Pack 3 for laptop Dell Inspiron 1300, running Windows XP Home Edition, Version 5.1.2600 fails because:
  1 / "service Pack 3 c:\windows\softwaredistribution\cff8ec753e88561d2ddb53e183dc05c3e\update\update.inf file is not correct.
  2 / the 0x8007F00C error code

  Please notify.

  John
  Lancaster

  0X8007F00C: STATUS_INVALID_INF_FILE
  This [file] is for a different hardware platform.

  Start | Run: (type) WINVER. [OK]

  After the second line of text in the window that appears.

  =============================

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  How to troubleshoot a failed installation of WinXP SP3
  http://support.Microsoft.com/kb/950718

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

  Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009.  This support will cost U.S.$ 59 or by higher incident now.

  Note: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  Does that mean if my version of Windows is no longer supported?
  http://Windows.Microsoft.com/en-us/Windows/Help/What-does-end-of-support-mean

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why does it fail to Lr and Ps download and install on my desktop? (Order # C5000162754)

  Why does it fail to Lr and Ps download and install on my desktop? (Order # C5000162754)

  Why does it fail to Lr and Ps download and install on my desktop? (Order # C5000162754)

• After I download and install updates for windows, I have to restart my computer. But on reboot, I get a message saying "failed in windows recovery configuration" maybe not in these exact words I don't remember completely.

  I clicked on the button of my windows update and downloaded and installed updates "security update for windows 7 for x 64 systems based on" and everything is fine until I have to restart my computer. When the computer reboots, I get this message that says something along the lines of rupture in the configuration, the files back or windows. Can someone please help me here? I've tried everything I can think of and nothing works.

  Hello

  Can you try to start up in the Advanced Boot Options menu by pressing F8 during restart the computer? Then, select "Disable automatic restart in the event of system failure." I would like to know if it works.

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My XP computer keeps trying to download and install this update KB2686509. It is a zero-byte file.

  My XP computer keeps trying to download and install this update.  It is a zero-byte file.

  Any help would be appreciated.

  Jack

  Original title: Windows XP (KB2686509)

  A lot of discussions about this particular update:

  http://answers.Microsoft.com/en-us/search/search?searchterm=KB2686509&CurrentScope.ForumName=Windows&CurrentScope.filter=windows_update&askingquestion=false

  more particularly:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115C-419D-AC37-03ff8927b79c

• Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

  Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

  Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

  Kind regards

  Ed S.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Method 2:

  You can also read this article and check if it helps.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

• error code 80072EFE appers when I try to download and install updates___

  error code 80072EFE appers when I try to download and install updates

  Hello

  This rootkit has been known to cause this problem.

  TDsskiller (Rootkit removal tool)
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Then, restart and check the updates.

  To search for other malware use this online scanner:

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  ==================================================================

  If necessary:

  Run 1 SFC

  Start - type this in the search box-> find CMD at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  ------------------------------------------------------

  Then check out this article:

  You may experience some temporary connection errors when you use Windows Update or Microsoft
  Update to install updates<-- check this="">
  http://support.Microsoft.com/kb/836941

  Do these two and try updates

  Description of the update tool of the system for Windows Vista, Windows Server 2008, for Windows
  Server 2008 R2 Release Candidate for Windows 7 Release Candidate
  http://support.Microsoft.com/kb/947821/

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  =============================================

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• says «Download and install the driver for memory card reader»

  Have a HP Compaq 2510p laptop with Window 7 Professional. In the center of the Action, it is said to download and install the driver for the memory card reader. When I do that, it says the following:

  This solution could not be downloaded most likely causes:

  • Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  Internet works and tried repeatedly, without success. There is also a vertical line on the screen of the computer that is still increasing so much width every day. Is this related?

  Thank you

  The vertical line is a strong indication that your screen is failing.  You will need a technician to replace it.  It will be not cheap.  Make sure that they install EXACTLY the good screen.

  Your computer is capable of displaying web pages?  If so, it is online and there is another problem that causes this download produce this message.

  Go to the HP support website and find your computer model.  Then find the driver, you need and download and save to your desktop.  Once you do this close the browser, and then double-click the update of the driver.

• Full version Windows 10 downloaded and installed more than 10 hours a day for laptop Windows 7 Service Pack 1

  Hello

  Currently, I have a laptop running Windows 7 Service Pack. Yesterday, 1 tried to download Windows 10 for more than 10 hours then turned to install for centuries. So, I stopped the installation. I wonder... can I know - is it normal to take some time to download and install Windows 10?

  Thank you.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

    How to: upgrade previous versions of Windows using the file ISO for Windows 10

    How to download official Windows 10 ISO files

• Cannot download and install applications on Win 7 64 bit

  I am running Windows 7 Home Premium 64-bit.  I can not successfully download and install all applications using IE 9.  First of all, I get a warning that it is not a common software (even for programs commonly downloaded as Win Zip).  Then when I save it, what is saved is considerably lower that we shouldn't.  When I try to launch the installation software, it tells me that he is not a Win32 application (which is meaningless to me as WinZip is 64-bit compatible).  In this case no matter what I try to download and install.  On the other hand, Windows is able to download and install its own updates.  I saw that another son on this but no answers that were useful, can anyone help?

  I have Norton, but it was turned off.  However, I failed to mention an important detail.  This resulted in Windows 7 run on a virtual machine (Parallels).  I talked to Parallels support and they had me change a setup that seems to have solved the problem.  Thank you for your efforts and sorry for being incomplete in my messages.

• Get the 8004FF84 error when you try to download and install an upgrade for Windows

  I can't download and install an upgrade for windows. Try to install the product error code 8004FF84.

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to how to replace lost, broken, or missing Microsoft software or hardware on the Microsoft Web site.

  Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• I downloaded Office creative cloud and downloaded and installed Lr. But Lightroom does not open...

  I recently downloaded creative cloud, open Office and work. Then, I downloaded and installed Photoshop and Lightroom. But Lightroom will not open... What am I missing

  check if it is installed.

  If this is the case, suspension av and antimalware and try again from.

  If this fails, reset your preferences - https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

• elements 14 downloaded and installed without problems, results of creative cloud in error 207

  I recently bought the Canon 7 D Mark II and received a 1 year free to the creative cloud subscription. I tried for three weeks to download and install CC, but just get error 207.  I tried all the suggestions of various forums on this subject, but nothing works. I stopped my anti-virus, firewall, bypassed my router and on and so forth.  I just downloaded and installed 14 elements without any problem. I also received One Kelby Training for a year, but may not use it to CC.  Any suggestions?  I am 70 and have successfully downloaded and installed several software products over the years. Why is it so difficult?

  207 occurs when there is no response from the server (in case of timeout), intermittent errors HTTP or dead connections. Please see the links below for the solution.

  • Error download or update Adobe Creative Cloud applications
  • Error 207 to "install Adobe".
  • Creative cloud 207 error download failed

  Hope this will help you.

  Kind regards

  Hervé Khare