KB890830 settles (XP Pro SP3)

Similar Questions

• Vista SP1 upgrade to XP Pro SP3 or SP2 Business?

  I have a Dell T3400 workstation comes with a Vista Business OEM COA product key, however, this PC has worked with XP Pro SP3 using detail settled. It is time to migrate to Windows 7, however, there is no direct way to "upgrade" from XP to Windows 7, except a clean install.

  My plan is initially upgrade Vista Business OS and then upgrade to Windows 7 Pro. This should be doable by the version upgrade paths available for each operating system. Of this plan, I did a 'test' upgrade to Vista SP1, and it seems to have worked OK (after application for new drivers various and other software upgrades).

  Windows activated and ran OK with this process, but subsequently he reported several pieces of software not compatible with Vista - no surprise. However, I could uninstall is no longer that slot software Vista as it seems to have too writes the necessary special uninstall files. I've returned to XP from a ghost image and will have a second run at it with some XP more pre working on ready for the upgrade.

  My main question: should I remove the patch SP3 of XP to upgrade it to SP2 before applying the Vista SP1? Any other consideration? I read in some other forums of Vista upgrades becomes flaky or non-fonctionnel because they were created before the release of XP SP3 and don't seem too well to manage the later version.

  Thanks in advance for any thoughts.

  I think it will be a case of trial and error. Since you have Ghost to restore XP you can uninstall all apps that play well with Vista and do the upgrade to Vista.  Just make sure that the device drivers for Windows 7 are.

  How to perform an upgrade in Place of Windows XP to Windows 7
  http://www.PAGESTART.com/xpwin7inplaceupgrade01.html

  J W Stuart: http://www.pagestart.com

• Last download of Norton Security seen cloud 9 virus issue after downloading Firefox opens not said 'cannot find runtime", removed and reinstall XP Pro SP3 work

  Running Firefox 36.0.1 an update has been downloaded on 3.19.2015.
  Norton said that this is a problem of cloud 9. Subsequently tried to open Firefox,
  but instead of opening, I received an error "can't find execution". "."
  Deleted Firefox of installed programs, news and everything works great.
  2 days later received an update downloaded and exactly the same thing happened.
  After removed again, installed new with 36.0.3 and everything works fine again.
  I use Win XP Pro SP3

  It's a problem with Norton and not the Firefox browser with Norton of Suspicious.Cloud claim

  She did this false positive Suspicious.Cloud with SeaMonkey for years every so often releases SM and Norton did not bother to fix it. Norton antivirus would claim a virus found in file freebl3.dll only there is not and never has been.

  You have to be such a regular occurrence that they still singling out Norton in the known issues for SeaMonkey version notes for a few years as can be seen in http://www.seamonkey-project.org/releases/seamonkey2.33/#issues and appears until Norton finally fix it.

  Messages on the claim of Suspicious.cloud with Firefox here (and mozillaZine) were infrequent compared to SeaMonkey.

• Satellite A100 - no sound with Windows XP Pro SP3

  Hello

  I'm the reconstruction of a laptop Toshiba A100-PSAA9A-10U038 with a new installation of Windows XP Pro SP3.

  At this point, I have not all sounds (Yes, the volume is set to the top).

  As this is my first post I covered I hope that most of the bases as with SP3 and I installed all the updates available from Toshiba and Microsoft - well at least, I guess I have. I downloaded the latest updates from Realtek who advised in a general forum but no luck.

  Device Manager tells me that there are problems with a "PCI Device" and a "unknown device", and I assume that one of these two is the culprit.

  Any suggestions would be much appreciated.

  Hi mate

  I think that you have installed the driver of his evil.
  See this page:
  http://www.MyToshiba.com.au/support/notebooks/satellite/A100/psaa9a-10u038/download?OS=22

  you will find all of the Win XP drivers for this model of laptop.
  As you can see there are two different Realtek drivers:
  V Realtek Audio Driver 5.10.0.5253
  -Realtek ALC861 Audio Driver 5.10.0.5200

  To my knowledge, you have the Realtek HD audio Manager.
  But before install you the audio driver SP3 must be installed, it seems, that you did
  However, the most recent audio Realtek driver can be downloaded from the Realtek page directly.
  Select this check box, and then choose Manager Realtek HD audio for Win XP.

  Should work.

• Satellite C660-1TN. Win XP Pro SP3. GF 315 M graphics driver

  Laptop Satellite C660-1TN. In accordance with company standards, it is necessary to work in Windows XP Pro SP3. The NVIDIA® GeForce® 315M video card driver is not established. Thank you

  Your business standards are quite old. It should be time for a corporate update to the new standards. ;)

  Anyway, new models of laptops are not supported for older operating systems, and new models of laptops are designed for the new operating system. New laptop models have newer material designed also for newer operating system.

  Problem is not Toshiba or support for Windows XP Home edition. As far as I know even Microsoft doesn't support WXP more.

  Check if NVIDIA supports Windows XP Home for GeForce 315 M.

• Satellite A200 - 1 3 - readers of the need to run Windows XP Pro SP3

  Hello

  I need help to find the disks required to run Windows XP Pro SP3 PT - PT on my Satellite A200 - 1 3.

  Due to the extremely poor performance of Windows Vista, I did a downgrade of the operating system and I've managed to install the SP3 Windows XP Pro PT - PT, but some components does not (Ethernet, network, WiFi, Audio, Modem, video VG compatible) as they shoud due to the lack of correct readers for XP.

  I tried to find the spec of my machine then trying to find the right drive in the components manufacturer sites in the Toshiba site, but it turns out be a mission impossible because it seams to have a detailed description on all machines A200 except A200 - 1 3.

  If you can help me on this topic, I would be grateful. Thank you.

  Why you don't use an advanced search option here in the forum to get similar questions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57916

• Looking for Satellite P100-PSPA3U of the driver for XP Pro SP3

  Hello

  I tried the driver for the Toshiba Satellite P100-PSPA3U. I am trying to get the driver on the European site, but I could the found.
  I'd really appreciate it if someone could help me with this problem.

  The laptop has the English version of Windows XP Pro SP3 32-bit.

  Kind regards
  Caesar Garnier

  Hi Cesar

  What is the country of purchase? It is P100-xxx?

• DC 7900 SFF: Missing driver for DC 7900 SFF Windows XP pro SP3

  Hello

  I already read this post: http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7900-SFF-Drivers-for-XP-Professional/td...

  But unfortunately it does not solve my problem with a driver missing on the relocation of a Windows XP Pro SP3 with the DC 7900 SFF.

  The missing pilot is linked to:

  PCI \VEN_8086&DEV_ 3 A 02 & SUBSYS_3034103C & REV_02

  Everything else seems fine.

  If someone could give me some information or links to the correct drivers, would be great

  (already tried most of the available drivers on the HP site for this model)

  Thank you!

  Hello:

  This hardware ID decodes the Intel ICH10D / DO SATA AHCI Controller.

  The chipset installation utility should be installing this product...

  https://Downloadcenter.Intel.com/download/20019/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets

• Pavilion #P7-1003W: replace # model HP Pavilion P7-1003W operating system XP Pro sp3?

  Hello, I am a newbie who is eager to see if anyone knows if I can load XP pro sp3 on this machine? I understand that it is a 64-bit computer that initially had the windows7 home premium? I do not want to load windows 7 again, that I prefer using windows XP Pro, no one knows nothing of this OS change possible? Thanks in advance

  PS I pray it's possible? / also, if this is possible? do I need a disc of different windows software for which is a 64-bit computer, or my trusty disk microsoft XP works on this device? «"" any advice, would be very good if welcomed»»»

  I forgot to mention the most important part.  It takes a working for XP SP3 key to activate Windows, once it is installed.  It is not possible to buy a key of MS for XP, so you would need a key from a retail disc.  The key for the PC must be on the box, but since this is for Windows 7, as you mentioned, it will not work with XP...

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• SFC/scannow running on an XP Pro - SP3 without a CD XP Pro SP3 with the system files that SFC can recreatives__ form

  SFC/scannow running on an XP Pro - SP3 system without a CD with XP Pro SP3 files can be used by SFC form

  Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/xpperformance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• If the C:\winnt folder should be present on all computers that run the same WinXP Pro, SP3?

  I tried to install a wireless adapter USB on my laptop, but I can't seem to get the driver from the installation CD files to load.  I have no problem loading and use of the adapter on my desktop. They are in C:\winnt\system32.  On my laptop (Dell Inspiron 700 m, running the same WinXP Pro, SP3), no there no. C:\winnt folder. This would explain why the CD with the driver files will not charge in the computer and so why the adapter won't work. Why would this file be C:\winnt... not being on my laptop using the same operating system? It would be possible that Dell to have intentionally omitted when they loaded 'their version' of XP?

  Some XP system files in C:\WinNT store computers, and some store in C:\Windows .  I don't think that the difference due to the problem with your wireless network card.

  The driver installation should ask Windows XP where to install the files, using the value of the environment variable SystemRoot .  Its value, click Start > all programs > Accessories > command prompt , type the following command and press enter :

  echo % SystemRoot %

  That shows the Manager of devices for the network adapters?  The wireless card is installed, and it has a driver installed?  There are some unknown devices?

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows xp pro sp3 can not get updates - don't stop to check updates and nothing happens.

  For the past 2 weeks I can't get windows on windows xp pro sp3 updates. The green bar that runs while the verification of updates just keeps running and running and does'nt stop until I have stop. No error codes at all.
  Run the fix it tool and indicates "registration for the service is missing or corrupted" and it offers a solution for the problem of the does'nt.
  What is the reference for this?

  I had the same problem and you will spend one day trying many suggestions, including various Microsoft Fix - its, which none worked, and which some worse messing with the BITs service (that I then had to restore, losing even more time).

  In the end, I found that the problem was related to the update of Cumulative security for Internet Explorer 8. There is a kind of incompatibility with previous versions of this update that causes IE stuck when he tries to check the updates.

  The solution for me was to download and install the * last * IE Cumulative Security Update * manually * before you try to run Windows Update to get the other patches. Here's how:

  (1) using the Internet Explorer, I visited the current MS security bulletin page

  http://TechNet.Microsoft.com/en-us/security/bulletin

  (2) from there, I went to the latest summary (November 2013) and found the update of IE at the top of the list: "Cumulative Security Update for Internet Explorer (2888505).

  (3) I couldn't see direct links for just this update, so I copied the number of the Knowledge Base - 2888505 - and google for "Download KB2888505" (Bing didn't work by the way). This gave me the direct download link:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41074

  (4) I have downloaded and run the update installer and then restarted (as required by the software update).

  Microsoft/Windows Update restart worked. I repeated the same process on a second computer with the same problem and it worked also.

• Microsoft Update loops XP Pro SP3

  I start Microsoft Update - "Checking to see if your computer has the latest version of Windows Update software" alternates with "looking for the latest versin of Windows Update software" that loops several times while the URL continues to grow, adding an extra & muopt = 1 to the end after each iteration to see what URL becomes after a few passes : http://update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us&muopt=1&muopt=1&muopt=1&muopt=1&muopt=1& - Windows XP pro SP3 - ran Fixit, no help

  I've experienced this as well.

  Go to http://windowsupdate.microsoft.com and install the update mandatory. Once installed http://update.microsoft.com works again.