KB951847 failed with 80010108

Similar Questions

• Update KB951847 failed with the error code 80200053

  Day before yesterday I did a reset (this was described to me, basically as a reformatting of all readers and a reinstallation of original software) on my desktop HP with Vista x 64.  Yesterday, I was doing the Microsoft Updates (I think he had 101 in total which stood for me).  All of the except KB951847 installed correctly.  When he reached KB951847 it says it failed with the error code 80200053.

  I read on another thread that security antivirus software or others could cause this problem, but I still have to install it all because I read that it can interfere with some updates from Microsoft.

  If anyone has solutions, I would be very grateful.

  Choose one or two-online http://www.google.com/search?hl=en&rls=com.microsoft:en-US&q=+site:answers.microsoft.com+KB951847+%2B+optional+%2B+hide&biw=1003&bih=589

• Exit 11 topic: config fails with the error analysis

  No problem after installing version 11 until they tried to use
  Subject: config which failed with the following message.

  XML parsing error: undefined entity
  Location: subject: config
  Line number 59, column 1: key = "& focusFilter.key;" modifiers = "accel" oncommand = "document.getElementById('textbox').focus ();" / > "
  ^

  The problem was caused by Prefsearch addon. I have notified the
  Developer.

• ORA-27300: OS dependent operating system: CreateThread failed with status: 8

  Hi all

  I'm looking for information on the guide follow error

  ORA-27300: OS dependent operating system: CreateThread failed with status: 8

  ORA-27301: OS Error Message: not enough memory is available to process this command.

  ORA-27302: an error occurred at: ssthrddcr

  Thank you
  Waqas

  Please don't be crazy on me, but in my opinion, this is the wrong place for your question. The fact is that Toshiba doesn't support Windows 2003 server for mobile computing. If you have problems try again with Microsoft.
  As a manufacturer of operating system, they should be able to offer an explanation for each error message. Sorry, but I see no connection between the problems described and Toshiba as a hardware manufacturer.

• Firefox install fails with WIN ME

  I tried to install Firefox 3.5 and 8 on a Win ME - both system fail with "Setup causes an error in the Setup program. Firefox 2 was OK. Firefox messages suggest an update is necessary, but I can not because the installation program does not work.
  I also can not provide FEEDBACK - because it suggests, I need "Last version" which I can't install "simply" as it says on the feedback page. It's a probplem with ME - like the other browsers like IE and Chrome latest versions do not appear to it either... am I stuck with older versions?

  You can try KernelEx for versions of Firefox 3 + to work, but they might be very slow with an old PC less 750 Mhz and RAM.

  http://sourceforge.NET/projects/kernelex/

• Can't do dmg file in the folder - "operation failed with status 1"

  I have a 1 TB hard that often went around. There are some personal files here although I am trying lock creating a DMG using disk utility and turning on encryption. However, whenever I try to do that, I always get an error code - status 1 to be exact. Note that it only does on some records. I had about 15 cases work this way with success, but I get this error a LOT... probably about 40% of the time. "Whenever I try too search ' operation failed with status 1," nothing appears! So frustrating! Any help at all is greatly appreciated! Please see the photos to see more. Thank you! Information... Files in JPEG areinformation1st picture2nd photophoto 3

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray

• SSM BIOS deployment ends sometimes fails with error 0 x 642

  Hello

  I'm trying to use the SSM software to deploy an update of the BIOS on my HP Folio 9470 m 300 and run to an intermittent problem.  The problem I see is that sometimes, the deployment fails with a dependency error 0 x 642. I was not able to determine a reason for the failure, and the same package deployment works on another laptop.

  The only consistency I was able to reproduce, it's that if the installer has failed the first time, it will fail at each time in the particular computer.

  I've included a deployment successful and failed log files.  I confirmed that there doesn't seem to be a problem with the help of the incorrect BIOS password, because I put the password to that specified when I created the database deployment and it will still sometimes fail.

  Let me know if I can provide any additional information.  Any help would be greatly appreciated.  I really want to be able to use this software, because it would make my job managing these laptops much easier.

  Thank you
  
  Raymond Northcott

  Successful deployment log file: https://drive.google.com/file/d/0By0fDHxxVEc6SHhZb0VDRVRMRWc/edit?usp=sharing

  Deployment log file fails: https://drive.google.com/file/d/0By0fDHxxVEc6NXdEOTV6bnJ3TGc/edit?usp=sharing

  I know it's late, but I saw this post today.

  The team responsible for the SSM does not monitor this forum.

  According to the newspapers, that you've posted, you use SSM version 2.14 A8.

  Your version prior to the design and production of the folio 9470 by about 3 years.

  SSM were many changes since 2.14.

  Please update to the latest version.

  You can ask questions about DFS and other management tools for client in the HP PC customer management community forum.

  HP PC Customer Management Community forum

  The client pc discussion Forum management focuses on the following topics, but is not exclusive to them:

  HP Client catalog

  Catalog Client for Microsoft System Center Configuration Manager, product HP is used in the deployment of the software updates from HP (SoftPaqs) for HP PCs commercial in a Microsoft System Center environment.

  Driver HP packs

  HP Driver Packs contain the required Microsoft required Windows drivers

  in support of HP or several hardware platforms listed in each of the driver pack release notes.

  Integration Client HP Kit

  Kit of integration customer HP (HP CIK) is a plug-in for Microsoft System Center Configuration Manager.

  HP BIOS Configuration utility

  The utility of Configuration BIOS HP (HP BCU) offer the possibility to manage settings of the BIOS on HP desktop support, post work or laptop.

  Software for the HP System Manager

  HP (HP SSM) system software Manager is a utility to update the BIOS and the device drivers on your networked PC.

  These tools and more can be found at www.hp.com/go/clientmanagement

  Look at the menu of resources for items like library to download CMS HP, HP CMS Whitepapers or Packs driver HP.

  Download HP CMS library contains the latest version of SSM.

  HP CMS Download Library

  If you have any questions about SSM or every other utilities listed, this is the best forum to find answers.

  Thank you

  Richard
  I have worked for HP, but am not a spokesperson for the company.  In the community forums, participation is voluntary.

• iTunes update fails with 'a signature not valid '.

  iTunes update fails with 'a signature not valid '. What can cause this error

  I suspect a corrupted download. If you have trouble downloading the correct Installer iTunes try; Uncheck the box "Keep me updated", clear the cache of your browser, change the settings of the blocker, a right-click or ctrl - click on the download button, using a different browser, or by using the direct links here.

  See troubleshoot problems with iTunes for Windows updates if you have additional problems at the facility.

  TT2

• Replication fails with the-501 error

  Hi all

  My replica jobs suddenly all fail with error - 501 (I can't find any info one that means), but that's what shows the log to replicate:

  Replicate version1.3.0 generation R2

  From backup

  Folder lock target: /...

  File recovery is «...»

  P2P connection to the nas-xy-xy (distance RN102)

  X cannot connect to the nas-34-xx-yy (local RN104)

  X the connection - 501 error code

  X please verify the network connection between the devices

  This worked very well for months since the last update 6.5.1 I'm not aware of any changes that I made in each of the configurations.

  Both RN do not appear in ReadyCloud, Replicate sees the two RN in the network tab but when starting a job to replicate my local RN on the RN remote I get the above fault message.

  I am very reluctant to upgrade to 6.5.2 that it worked very well on 6.5.1 for so long and I did not really pleasant experiences for the latest updates...

  Someone at - it similar experiences (I'm inclined to think that the issue is on the server to replicate as it happened before that jobs has failed for a period, but succeeded after a few days without any changes on my side.

  Any suggestion that means this error - 501 (and how to fix it)?

  And if all fails, I'm getting a little tired of the repeated questions, someone at - it an installation of certificates SSH on the RN to activate RSYNC over SSH?

  Any comment is very appreciated!

  Yes, just tried it and got that job, turns out that apart from the source and target parameters that needs to be identical to the old job, also the name of the work is essential, it must be exactly the same as the lost job. (on the target files side are stored in a folder named after the name of the task, found that rather confused, but either way, once you are aware of it...)

  Don't have that and I got my old RESUME jobs where they left, it looks like I'm back in business.

  Thanks for your support!

• HPDM deployment fails with the error code: 14031022

  Hello everyone,

  I ve a strange problem with a new repository of child I ve created two weeks ago. Following situation:

  We have a master and (until now) repository repository a child for two locations. Capture and deployment on each side works fine. Now we're getting a third place, so we need another hpdm gateway and a child repitory to this place.

  I've added and configured as one worked and insert the IP address of the gateway again to a thin client to the new location. When I deploy an image on this client, I get the following error in the console of hpdm:

  2014-12-16 11:02:09 Assign repository: repository child name repository
  2014-12-16 11:02:13 synchronized correctly Completed.
  2014-12-16 11:02:14 task sent to the device management gateway
  2014-12-16 11:02:17 task has been retrieved from the agent.
  2014-12-16 11:02:58 deploy the image ready using the repository: repository child name guard.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed

  Agent of Thin Client Gateway: 4.5.3660.18502

  HPDM bridge officer: 4.5.3660.19.503

  agent update task works.

  I ve configured the shared folder and FTP access. Both are available from thin client. Configuration of the repository the two test passed successfully.

  Repository of child synchronize all the data from the master repository with success.

  Usually, I use FTP in IIS services, but filezilla I ve installed (disabled FTP IIS) for the best connection.

  Connects to the deployment task:

  000027) 16.12.2014 11:02:27 - (not connected) (10.32.2.52) > connected on port 21, sending the welcome message...

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > USER test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > 331 password required for the test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > PASS *.

  16.12.2014 (000027) 11:02:27 - test (XX. XX. X.XX) 230 > connected

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > FEAT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > QUIT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. Goodbye > 221 X.XX)

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > disconnected.

  Next, I get the above error HPDM. The server log HPDM said next.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  Mhh not a lot of information.

  I Don t really get what could be the problem. You have an idea? Do you need more information (newspapers, error message TE) for assistance?

  Concerning

  Martin

  After the coup of controller.conf and the screen of the dialog editor repository that you set, your master repository was not configured this way:

  ReposPath has the value "C:\Inetpub\Ftproot\HPDM" in controller.conf (assume C:\Inetpub\Ftproot is the root directory of the FTP server)

  In the Master repository Editor dialog box:

  Implement FTP path to ftp: / //HPDM - he WS ftp: / /<>/. your screenshot.

  This is the reason that all of your linked FTP task failed with the same error code.

• Installation fails with "internal error 2502.

  I have a client that is running Windows Vista Home Premium (32 bit) and my application setup CVI-built fails with "internal error 2502.

  This installation kit has been deployed successfully on hundreds of computers with different versions of Windows, and I never saw it. No device drivers or advanced libraries - just standard execution. I use CVI 9.0.1.

  Some old problems with the Office installation, date/time settings etc. of research show very little - but I still found nothing which indicates what means this error.

  Ideas or ideas very welcome.

  Thank you

  Ian

  Thank you love. It seems that the problems #2 (permissions) were part of it and possibly other problems linked to the virus. It will re - open this computer from scratch. Detective Conan.

• HP DeskJet 1512: DeskJet 1512 Installation fails with Windows 10

  I just updgaded my g7 HP Pavillion from Windows 7 to Windows 10 and I can not get my DeskJet 1512 to work.  I went to the HP site to shoot down the latest drivers from my drive for installtion of origin has no Windows 10 drivers on it.  Driver downloads, but the installation fails with the message: "the an installer for this device cannot perform the installation at this time."  I have administrator rights on my laptop, no one else is logged on, and I have no other applications running.  Any suggestions?

  Hey there John!

  Please try my suggestions and getting back to me. You can try downloading and running the print and Scan Doctor then choose "Difficulty of printing" and let it run its course. See what the end results you show here and then try again to print. Please also let me know what the results show.

  Try printing a few programs various (Notepad being one of them please) to see if the problem is with a single program, or all of them. Maybe a firewall can block the connection, try to leave this option off when you try to print from the few programs.

  Good luck! Enjoy your day

• system recovery fails with the C++ runtime error

  My Compaq CQ610-410US Windows 7 running is unusable. When you use the system recovery, either from CD or recovery, it fails with C++ runtime library program not found contact HP support. Whatever it is, Windows is loaded and the system restore screens appear. Once I answer to remove all the accessories it fails with run-time error. Two questions: (1) is there a way around it? (2) get new disks from HP recovery even work?

  All I can suggest is to order a set of HP and I hope they work. This error is not a municipality and the provided HP recovery discs should work.