KB970653 evolves Lotus Notes client and servers of the zone.

Similar Questions

• Firefox will not pages, and none of the steps in the section support help. I need a real person to help. Reset, reloading, Proxy, Firewall...

  I went through all the bandages above after receiving the following message "unable to connect".

  Firefox can't establish a connection to the server at www.msn.com.

     The site could be temporarily unavailable or too busy. Try again in a few moments.
     If you are unable to load any pages, check your computer's network connection.
     If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web."
  

  I reset, I checked the proxy (for no), I checked the firewall (enabled for FF), I uninstalled/reinstalled, I ran malware check (negative). I'm at my wit's end because I NEED FF for applications work which will not come through IE because of the policy of the company. I need serious help or I'm screwed.

  FF worked perfectly up until a week ago. Now, it starts on the homepage of FF but goes no further, even in safe mode. What gives?

  I uninstalled Chrome, same.

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. Please try to remove all the program rules for firefox in your firewall and let it detect the program again: problems connecting to websites after Firefox update

• I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image.

  Original title: HELP! Problem 'open with '.

  I also have a problem of 'Open with', that has happened before. I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image. Even the new emails are now coming this way. How can I get rid of this or the reverse?

  Hi Patti Gunderlock,

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps in the following article, and check, if that helps.

   

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

   

  Method 2: If the method above is not enough, then you can follow the steps described in the article and check.

   

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Let us know if that helps.

• Seagate installs but I can not find and cannot open the unit to see my files

  whenever I installed my seagate freeagent go drive.. initio default controller is the one that pops up saying ready for use, but I can not find and cannot open the unit to see my files, I can see it as (which I think it's maybe) in devices, printers as 'Initro Default Controller.

  The disc may need a drive letter must be attributed. Please try the following link to assign a drive letter to the drive.

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

• get a new computer.  I need to reinstall my creative suite adobe 6 web design and premium.  My drive is not helping and is nor the web site.  Please, please help.

  get a new computer.  I need to reinstall my creative suite adobe 6 web design and premium.  My drive is not helping and is nor the web site.  Please, please help.

  P.S. If you don't like our help, you can always contact customer service.

• I am currently using Adobe Acrobat Pro and cannot use thumbnail images in some of my PDF files. I have not upgraded and have always the possibility to use with certain PDF files, but not all. Help, please!

  I am currently using Adobe Acrobat Pro and cannot use thumbnail images in some of my PDF files. I have not upgraded and have always the possibility to use with certain PDF files, but not all. Help, please!

  Version: Adobe Acrobat 9 Pro

  Windows

  I found the solution:

  In the PDF file, click View > Navigation panel > Pages

  I had to reset panels to view the Pages again.

  Thank you!

  Heather Solis | Operations associate | Crown AFAM Capital, Inc.

  [personal information deleted by Moderator]

• Migration of Lotus Notes e-mail groups in the hive

  Is it possible to reproduce our existing Lotus Notes e-mail groups in the hive?
  
  Edited by: dazimon June 23, 2011 07:59

  Sorry,

  Distribution list - my apologies for the jargon.

  Phil

• Lighroom does not open and I get the following message "this beta version of lightroom has expired.

  Lighroom does not open and I get the following message "this beta version of lightroom has expired. Help, please

  Thank you for your help.  I upgraded to LR4 and everything is now sorted (I hope)

  All the best

  Serena

  (details deleted by the moderator)

• RV180W PPTP: no access to clients and servers LAN remote

  Hello

  After searching a lot on the Internet about my problem without success, I have to start my own discussion.

  I set up the PPTP server and created a PPTP user as described in the manual of the admin of the RC180W router. I can connect to the router through the construction based on PPTP VPN in Windows 7 and on my Android phone. Then I can also ping the router and access the Web administration. But I can't access my network, nor their ping servers and other clients.

  My configuration is:

  • 3 VLAN:
    • VLAN1: 192.168.0.1 (255.255.255.0)
    • VLAN2: 192.168.2.1 (255.255.255.0)
    • VLAN3: 192.168.3.1 (255.255.255.0)
    • no inter-VLAN-routing
    • the clients and the server I would like to access, are in VLAN1 and connected to the router on port 1.
  • PPTP configuration
    • Start IP: 192.168.0.201
    • End IP: 192.168.0.205
  • The default firewall settings
  • Managing remotely on port 443 is enabled

  If I connect to my router with VPN, I get the following information about Windows 7:

  • Athentification: MS CHA V2
  • Encryption: MPPE 128
  • Client IP: 192.168.0.202
  • Subnet mask: 255.255.255.255
  • Default gateway:
  • Server IP: 192.168.0.201

  Once connected, I can ping the router and access the IP 192.168.0.1 Web administration

  I can't access or ping any other client or server, for example 192.168.0.96

  Kind regards

  Marco Spicer

  Marco,

  I noticed that you are in the same subnet in the subnet of the PPTP server. Connect PPTP clients should be in one different subnet other than 192.168.0.X. So an acceptable configuration of PPTP server could be the 192.168.1.x subnet, as long, is not on the 192.168.0.X subnet.  If this can help you and your problem, please indicate your answer for bugs

• BlackBerry Smartphones Lotus Notes mail and BB

  We cannot email from Lotus Notes on the BB. We can get the email from Verizon on the BB. We have set up the e-mail account of Lotus on the sprint.blackberry site. Sent us the notice of Activation. One of the two phones, that we even had a few emails, but only for 1 day, but no more. BB said that our Inbox is full on our server to Notes Domino email for these accounts. We have deleted / moved so everything except 20 emails. It has not solved the problem.

  Has anyone seen this problem?

  OK... now I understand better... in your first post, you had thrown me with the indication of the set up something about sprint but also mentioning something on VZW... It was a little confusing.

  FWIW - In BIS, you have the option to configure an e-mail account, hosted by your operator, it is only for your BB ([email protected] or something like that)... the people who use them in general do when their own messaging system cannot deal with internet (which prevents the BIS into it) - they transmit their internal to that account xyz e-mail so that they can see their email on their BB. It looks like your attempt to workaround (though using your account of the ASBL somehow).

  But, in your case, your email system is somehow in the face of internet, so on behalf of xyz is not necessary... good. Confusion cleared. What you try to do is indeed very frank--done in the face of your e-mail system internet via a POP server that integrates (probably it is back-end) to your internal Domino server. Cool.

  But, in order to dispel a little more - your carrier for your BB is sprint (from what I can tell). Therefore, with BIS, you don't have, as you say, "created the account email on the site sprint.blackberry.com" (thus leading to my confusion). Rather, what you've done, it's to create a BIS account on this site, in which you saved the credentials for your POP e-mail account, which is what is needed for the BIS to push emails to your BB. BIS is not a mail-server it is rather an intermediary between your mail server and your BB.

  Oh - another question... What is "quickr?

  Here are a few KB which may come in handy... not knowing what is the POP system, it is difficult to point in another direction. What I would say is remove the conduit BIS and recreate from scratch, using the methodology of integration (for example, via the site BIS of a PC rather than the bis device interface):

  • KB10154 How to integrate a POP or IMAP e-mail via advanced integration account

  BTW - if the Wizard do not configure properly of just put you in your e-mail address and password, then you may have to pretend out to put something wrong... so you will be able to get through the advanced screens and manually enter everything (the names server, the account credentials, ports, etc.).

  BTW2 - Ko above (KB10154) has several links below for troubleshooting steps to take... you might also need those (like these).

  • KB02857 Not able to receive e-mails from a POP3 mail account
    KB02169 Cannot send or receive e-mail messages by using the BlackBerry Internet Service

  You can be sure that your BB is properly registered on your corporate network.

  Registry of HRT:

  • Homescreen > Options > Advanced Options > host Routing Table > BBKey (no matter what line is highlighted) > sign up now

  Return Service BIS directories:

  • KB02830 Send the directories for the BlackBerry Internet Service

  I hope that something it will be useful to correct this problem.

  Good luck and let us know!

• Lotus Notes Date format question on the XP machine

  User on the AD domain is part of the XP machine and the date in the Lotus Notes database format becomes jj/mm/aa in a field, but saves as 7 December 2012 without worrying for the user.

  I sign on the pc and everything works fine, any ideas?

  Hello Skeetersmom,

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• VPN client and Setup for the RV042

  Is there a final configuration for a small VPN using the RV042?

  Situation is 2 remote users access to a server pc not (W7P) to access the files.

  The final point doesn't have a static IP address, but I put it in a DYNDNS.org so he brings back the IP address and I can access the router at least from the outside.

  I can configure the VPN users but is there to do?

  You want to use the alternative client QVPN or advisor.

  Appreciate any feedback.

  Thank you

  Bruce

  Bruce,

  QuickVPN normally works well for what you want to do. Make sure that the Windows Firewall is enabled in Windows 7 and Windows Vista clients. Disable all antivirus and third-party at least firewall software until you have verified that you have a successful connection. It is very easy to implement, simply create a username and password of the router. If you encounter problems, post it here or call your local support center Small Business:

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

• quiz or not? and... the button which has two actions?

  Hi all:

  This is the experience I want for the user:

  1. At the opening, the user will see instructions, a button (Counsellor response #1) and a set of five radio buttons on the right side of the screen.
  2. User clicks the answer to advise #1. Response text appears; at the same time, launching audio response.
  3. The user selects one of the option buttons and click on send. Feedback popup appears.
  4. When the user clicks to close the feedback popup, advise response #2 button is displayed.
  5. The user clicks on the reply button to advise #2.

  And so on, until the user has heard/read all the answers five Advisor.

  Originally, I used the Quiz tool multiple choice for that. (But this isn't technically a quiz. Users will not be marked on their choices, but will get "correct" and "incorrect" - type of feedback. They will also be encouraged to reflect on the reasons for their responses and be prepared to discuss with their supervisor.) I placed each answer to advise on a screen separate, and pretty well got it works this way, even though I had not yet added in the audio. Now I'm back after a long absence (period during which I forgot a lot of things), and I decided my existing design could be confusing for the user, so I switched to what you see here - all five answers (for a video of 'client' user to look on the previous screen) and their feedback on a single screen. And I tried to add the audio.

  I visited the advanced Actions panel and looked at the Captivate 'aid' of the page. I was following help along pretty well until the step that says "Complete writing code, using the options provided." I had no idea what they were referring to with the "code" or "provided options. So I tried to do what I want using just the properties panel for the answer of the Advisor button. The properties panel offers only one action per button, however.

  So my questions:

  1. How can I get a button to do two things at the same time (for example, display the text and play the audio)? If I could understand the advanced Actions 'code', I bet this button could do.

  2. I gave almost all Quiz items except the radio buttons and their links to comments. For example, when I added responses Advisor #2-#5 on the screen, I discovered I could not simply copy and paste from other slides or show the style of question on the screen, that I wanted to move. So I used Legend boxes. In addition, it seemed to me that a question box there is no advantage in this regard. So my question is: will, abandoning architecture quiz problems on the road?

  I'm sorry it's so long. Thanks in advance!

  It does not resemble me you should use quizzes Questions to this interaction in any case.  This is not what they have been specifically designed for.

  You can perform multiple actions in a single button click using the Standard Actions or conditional Actions.  I suggest that you will probably need to use this last longer than probably he finally some variables involved so that you can check what other options the user has already tried.

  However, I would hasten also to point out that you take here something that might be beyond your current understanding of interactivity of Captivate.  You may need to start studying up on top of the Variables, Run-time Events, stock Standard, conditional Actions and perhaps even of shared Actions.  Understanding these concepts will put you in better shape to succeed this interaction.

• Sharing collections or sets with clients and synchronization of the difficulty of the PS to PS on my Mac workflow

  Good,

  It is a question of both parties, but because this involves a workflow of the singular, I'm combining them.  The only other issue I've seen related to landmines, has been in 2011, so I hope as the State of LR (laptop or desktop) has improved since then. If not, it's pretty sad... but I digress. Here's the workflow:

  Go and do a shoot, we tell an event in this case. Shoot is done, and I'm on the train or the bus to go home. During my ride home, I already watch over and slaughter photos with LR mobile on my 6 + or iPhone an iPad because my Fuji sent them upon him via wifi. So, I create a collection for the guards, and the first thing I want to do is let the event coordinator will have access to the whole stem, so that I can return my guards with what she likes and confirm all the guards and put them in another collection, probably named something like: 'best choice '. Now that we have access, we can comment, favorite them or give them either colors or stars for editing priority.

  Now say, I am able to do some specific "picks" for the collection of first choice, and I decide to start to do some minor tweaking, such as removal of task/task or cloning in difficulty of Adobe. I wish I could go home, plop in front of my Mac, open PS CC and pick up there where I had left in Adobe difficulty. Is it feasible, or I live in crazy land?

  Finally, I'm done with final touch-ups and I don't want to succumb to the likes of download to Google Drive, Box, box etc... I just want my client to batch download the entire collection in full resolution. Even more crazy, or not crazy?  And if not feasible, it will be in the future, and if not, then why not? Because for all the hassles that cause this kind of thing, I can just as well use Affinity Photo, Capture1 and Google Reader etc... Why should I worry stick with PS 'CC', if the CC part is barely useful in this classic scenario?

  Thank you!

  Doug

  Hello!

  Warner has answered part of the question. What is able to pick up where Fix left, the answer is: definitely! You can send your changes to Fix Photoshop CC by clicking 'send to Photoshop '. However, you will have to "Send to Photoshop" each photo individually. A better way to have a whole lot of changes sync would immediately make the changes through Fix, send them to LR Mobile and have active sync. You will then need to make the rest of the Desktop LR edition or export them in PS CC. It is also important to keep in mind that using portable LR and Fix can resize your images according to their original size.

  It seems that, for now, our applications are completely unable to manage this workflow. Sorry about that!

  Let us know if we can help with anything else.

  See you soon!

  -Kathleen

• Discovers the problem of transfer Server - Service does not properly and maintenance in the waiting mode

  Hello. I have try to add view transfer Server Infrastructure and get the problems of follow-up:

  1. after that I have add forwarding server to "transfer servers" in the view manager, he is "on hold" and "missing transfer Server Repository. But on the record transfer servers 'System health' dashboard of my server in red and error is "the service does not work properly.

  2. If I try to put the server in maintenance mode, status is changed to "pending maintenance mode" and nothing happens at all. Server to remain in this State forever.

  I tried with two servers, Windows Server 2008 R2 and Windows 2003 Server R2. Both the same problem. I can't get another clue what is the problem.

  NIC is E1000, static IP and 'LSI Logic parallel' as a SCSI controller

  What can I do?

  Thanks for all replies.

  Change the role of the administrator of your view (or whatever the account that is used to manage the server transfer has role) on vCenter and put a tick in the box for Global-manage custom attributes.

  This fixed our environment, the index was in this error message on the display connection server.

  The error messages in the view ' 21: 51:50, ERROR 734 [ServiceConnection25] error when adding custom fields: [transfer Server Status, lock VM status] for type MB: VirtualMachine com.vmware.vdi.vcsupport25.ServiceConnection25. » addCustomFieldNames(SourceFile:1591)
  AxisFault
  faultCode: ServerFaultCode
  faultSubcode:
  "faultString: permission to perform this operation was denied."

  Aaron surfboard