Keep images off the screen

Similar Questions

• Is there a container that does not cut off the screen?

  I am trying to line up a few ImageViews who absorb the size of the screen next to each other. I have them all in 1 container.

  Problem is that everything that is not on the screen is cut off.

  Is there a way to prevent this?

  I know ScrollView allows images off the screen, but I don't want it to be floating.

  Nevermind, figured it out lol...
  I had to just a larger quantity than the size of the screen of the container minWidth value (or minHeight according to wherever it is cut).

• treble buttons to quick launch keeps flashing on the screen and wifi turn off voltage

  HP pavilion dv8 quick launch button treble keeps flashing on the screen and now and again the wifi turns off and I have to keep back on.

  Hello

  Unless you have already done so, download and apply the firmware update for the capacitive strip on the link below which is intended to fix this particular problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96360-1&cc=us&DLC=en&LC=en&OS=4063&product=4034201&sw_lang=

  After the update has been applied, restart the laptop.

  Kind regards

  DP - K

• Are preferably looking to keep the focus of the timeline in place after the playhead to play off the screen

  Hi all
  I think I used to have this setting put in place in a previous version of PP, but I can't remember where it was. I would like to be able to keep the focus of the timeline in place and leave the playhead to play off the screen. At the moment if I'm working on a section of the timeline, as he plays and the playhead leaves the window it will pop the update so that the playback head is located near the left side of the window and away from the section, I was working on.

  Is there a setting to turn this off? I really prefer monitor me my position of the window. Thank you!

  Edit > Preferences > General > scroll down...

• Div too long, extends off the screen, h Tags does not

  Hello again, sorry to ask so little time for assistance, but for every single thing this forum helped me with I have learned a lot about the construction of the site, so I am appreciative of all your help so far anyway.

  The problem I am today is one that I don't remember having a problem with before.

  Link: are we building & Design Showcase

  On this page the content div has been set to a size to fit easily on your browser, however after adding a padding on the sides of it, it doesn't grow the content. Instead, he keeps pushing the content of the page, forcing users to use the scroll bar to see all this. I could just make the width of the div smaller, no?... Well... I also tried, and it seems that even if my div is smaller and can be adapted to the size of the width and padding on the screen, for some reason any padding adds twice the additional empty space and still shoot off the screen, I can't understand why it does.

  I also noticed that my h tags, < h1 > < h2 > < h3 > ect. has stopped working as well. What would be the best way to correct this?

  As always, all the solutions and suggestions are greatly appreciated.

  Width: 100% + padding-left and padding-right = more than 100%:

  . Body {}

  Width: 100%;

  height: auto;

  background-repeat: no-repeat;

  background-position: center;

  background-repeat: no-repeat;

  background-image: url (.. / images/DBBACK.png);

  Police: Arial, Helvetica, without serif.

  do-family: Arial, Helvetica, without serif.

  padding-left: 50px;

  padding-right: 50px;

  }

  'body' is not a Word, I would choose to use as a class for a

  .

  H1, h2, etc. problem:

  In the style.css file delete h1, h2, h3, h4, h5, h6 reset default:

  HTML, body, div, span, applet, object, iframe,

  H1, h2, h3, h4, h5, h6, p, blockquote, pre,

  a, abbr, acronym, address, big, cite, code,

  del, dfn, em, font, img, ins, kbd, q, s, samp,

  small, strike, strong, sub, sup, tt, var,

  DL, dt, dd, ol, ul, li,

  fieldset, form, label, legend,.

  table, caption, tbody, tfoot, thead, tr, th, td {}

  margin: 0;

  padding: 0;

  border: 0;

  outline: 0;

  Police-weight: inherit;

  font style: inherit;

  do-size: 100%;

  do-family: inherit;

  vertical-align: baseline;

  }

• With windows 7, any display (Start button, label of the file on the toolbar) moved off the screen to the left and to the right there is a black margin. How to fix?

  If I reduce the resolution, all will be displayed but smaller. I would like to keep full resolution, but back off the screen to the right. It happened all of a sudden without any modification of the navigation by me.

  Fixed, maybe the symptoms. I changed the display size of 150 to 125% in control panel - display, and the situation rectified itself. Time will tell if the fix is robust. Thank you. d

• How use the serial port read and display the text but not scroll off the screen?

  I'm new-ish/return user fan of Labview and trying to change the example VI "Advanced serial write and read VI" is the part of the dev suite 2012.  I need to use the string box for ALL of the text from a serial port, always adding and just roll off the screen when the actuals come to the serial port.

  What actually arrived more than bytes (or no bytes AT ALL!), during reading time text, current rolls out of the box in the chain.  Even when receiving 0 bytes, screen is removed.  I'm not very familiar with the locations of functions and even worse to understand obscure references to functions, so please keep very basic answers so I can follow.

  Just to be clear, I need window of the chain behave as HyperTerminal does always displays the data and it is not pushed by window arbitrarily.

  Thank you

  Steve

  A long shot.

  Is that what you want?

• Photo folder to move off the screen when I try to open

  When I open an image file I recorded on my desk, she opens off the screen on the right side. Only that I know it's because when I click to open or minimize the folder on the taskbar, it flies across the screen when minimize. I can't get into any of my files as they open no where I can see or even not to the folder level. Help!

  Hold down the SHIFT key and right-click on the folder icon in the taskbar.

  And select move.  Use the arrow keys to move the folder in the display.

• Disable the ability for applications prevent turn off the screen and start screen saver

  Hello

  I need to disable the ability of application full screen to turn off the screen and start screen saver. Basically just need to it:

  When there is no entry in the application that is running in full-screen, I want to turn on the screen saver and turn off the display. As far as I know, the windows default settings is to prevent turning on the screen saver during modes full screen.

  Thanks for the reply

  Hello

  Thanks for posting your query in Microsoft Community.

  According to the description, I understand that you have related questions screen saver settings in Windows.

  A screen saver is a program that, including the screen or filling it with moving images or patterns when the computer is not in use.

  Screensaver programs were designed to help avoid these effects by automatically changing the images on the screen during periods of user inactivity.

  Windows uses photos that better match your monitor for locking screen slide show.

  For more information: See photos on the desktop, start and the lock screen

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• File copy/delete dialog box is off the screen in a staggered multiple follow Setup

  I'm on Windows 8 on a ThinkPad W520 with a 1920 x 1080 screen and a secondary antibody NEC LCD2070NX 1600 x 1200 display connected via DisplayPort. The NEC is positioned to the left of the ThinkPad and raised higher than the ThinkPad display; the bottom of the NEC is near the center of the left edge of the ThinkPad.

  I put to the top of the poster in the Panel to take account of this arrangement:

  http://mg.to/bugs/Windows/display-settings.PNG

  If I have a window of the Explorer of files open in the secondary monitor on the left and use this window to copy or remove some large files or folders, the progress dialog box is not visible. It is currently displayed in the "man no of land" above the main monitor and the secondary screen.

  The problem occurs when the secondary monitor is on the right, or above or below the primary. (I have tested some of these cases, but not completely). Also, this does not happen when the Explorer window is on the primary monitor. The problem does occur at all on Windows 7.

  Here's a film that illustrates the problem. For each image, I copied a large directory on the network and took a screenshot to display side by side and move the secondary display up to about 120 pixels in the control panel every time. You can see how the copy dialog box follows the secondary monitor vertically, but her left side is pinned to the left edge of the main screen, so he ends up disappearing from the screen.

  http://mg.to/bugs/Windows/multiple-display-bug.wmv

  It is easy to see what is happening here: Explorer normally centers the dialog box of progression on the same screen as the Explorer window that opened the dialog box. This does not work as expected in the direction, but on the axis X to the left edge of the dialog box's get pinned to the left edge of the main screen.

  As the corner at the top left of the primary monitor is always (0,0), it acts as if the dialog box was positioned like this pseudo-code:

  monitor = getWindowMonitor (feed)

  dialog.centerOnMonitor (monitor)

  If dialog.left< 0:="">

  Dialog.Left = 0

  When the dialog box is off the screen, it's a bit disturbing, because it makes the impression that the Explorer window is locked. The only way I know to make visible the dialog box is with this exercise of the superpowers of keyboard shortcut:

  1. use Alt + space to open the system menu of the dialog box. The menu will open on the screen no matter where is the dialog box.

  2. Press m to move (or click on move).

  3. you will see a four-headed mouse cursor, just to fool you into thinking the mouse could do something now. It will not!

  4 instead of this, you have to hit any key of the arrow, which begins the displacement of the dialog box.

  5. now you can use the mouse (or the puree on the arrow keys) to move the dialog on the screen.

  A bit of good news...

  I just tested this on the latest version of Windows preview 10 technical, and it seems to be fixed.

• The effect of ICT controls runs off the screen and the chronology of control carried out does not follow

  I'm working on a video where I need to change the image very close key pairs. But it seems that ICT is running off the screen and does not follow along as the ICT in the project timeline.

  How can I make the effect controls, ICT and the timeline synch upward? I can use previous and next keyframes, but the view of the timeline does not follow along. He made the process quite slow editing because I have to constantly to the scroll box allows to adjust the view manually.

  There is no option for this scroll.  You will need to zoom out.

• Captivate 7 - Variables window off the screen

  When you open the variable window, the window off the screen and I can't bring it back to one of my two monitors (double).  ESC comes to Captivate, but I can't seem to locate and drag the window to the return variables.  Any suggestions?

  I can't reconnect to a third-party monitor (which I used to have).

  I assume that you have already tried resetting the workspace, CP restarted and the system?

  Try to update preferences, using the Cleanpreferences file that corresponds to your operating system, and that you will find in the Utils to the CP installation folder subfolder. ATTENTION: you will lose any customization.

  Captivate 8.0.1 Install? Keep your customization! -Captivate Blog

• How to crop the image to the screen?

  I use first Pro CC to create "how to" videos and videos of training for a software application. I recorded the videos on my laptop and unfortunately could not specify that only the application was registered. Accordingly, I have bleeding around the low - and straight edges where you can see my laptop background. Is it possible to crop the area and only end up with the portion of the image of the screen I want to keep?

  Add the cropping effect

  

• I want to make the smallest windowq, she is so great that the buttons are off the screen mode full screen

  The Firefox window is in full screen mode, the buttons are off the screen. I want to get out of
  Full screen mode so I can resize the window myself. I am running Linux Mint cinnamon

  When you are in full screen view, move the mouse to the top of the screen to facilitate the bar bar appear Navigation and tab.
  You can use one of them to exit full screen:

  • Click the expand (in the top right Navigation bar) button to exit full screen
  • Click full screen in the '3-bar' button dropdown menu
  • Right click on an empty space on a toolbar and select "exit full screen".
  • Press the F11 key
  • https://support.Mozilla.org/KB/how-to-use-full-screen

  Try to rename (or delete) the file xulstore.json in the Firefox profile folder.
  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  If you are currently using a version from the repositories of your distribution of Linux, try the official Mozilla Server version.

  • https://www.Mozilla.org/en-us/Firefox/all/

• How do you get the menu bar to stop going off the screen all the time?

  2007 IMac 2.4 ghz 4gig ram 1tbt hard drive

  I've updated 'ELCAPITAN' and that I was using the preserved menu bar disappear off the screen that became boring and I couldn't find any way to stop the menu bar to go off the screen, so I went back to snow leopard but have updated for osX 10.9.5

  with no bar menu to disappear.

  The menu bar can be set to hide and show in El Capitan.

  In any OS X that implements the full mode screen, the menu bar is hidden in fullscreen.

  In both cases, move the mouse to the top of the screen will be un-hide the menu bar.

  You can disable the general masking in general system preferences in El Capitan.

  For full screen, you can prevent the concealment using do not full-screen.