Kensington Mouseworks compatibility and problems of locking of the click in Windows 7

Similar Questions

• Concerned about the compatibility and performance of i-Tunes if I install Windows 10 on my pc.  Can we predict what the problems are?  What solutions are there?  Thank you!

  Concerned about the compatibility and performance of i-Tunes if I install Windows 10 on my pc.  Can we predict what the problems are?  What solutions are there?  Thank you!

  ITunes 12.3 running on Windows 10 and it works great. Any questions or problems with it.

• Bar menu and toolbar buttons missing in the bookmarks library window

  I use Firefox v.3.6.6 and take a college course on the use of e-Business, which refers to the Firefox "Bookmarks manager" window. Finally, I learned through this forum that the name was changed to "library". (Please tell us!) However, I see a typical menu bar and a row of buttons on toolbar below that in the screenshot. And I can't find any information in the forum about how to enable these features, or what happened to them.

  Thank you for any information and help on this topic!

  Anonymous
  I recommend not all of what is called "update managers'. Why? I want to know what is installed on my system, when and by what comes in the update. I also want to follow the update process so that the articles 'extra', such as toolbars and search engines does not get installed on my system. Look how many people on this forum asking how to remove tall, mywebsearch, etc., or a toolbar that they insist that they not have installed. This kind of cr * p - ware comes with free downloads is installation of people. Some security software developers are including even this junk, because they get a small amount for each installed - SHAME on THEM!

  To update and maintain your system up-to-date is part of a user responsible for computer/internet. If you get lax, then you run the risk of transmitting malware, friends, family or co-workers. Why lock us our doors, set the alarm, etc., when you leave the House or lock our cars when you go inside a commercial shop? To try to keep the bad guys! It applies to keep your computer up to date and protected.

  Which I'll talk takes 5-10 minutes a week to be sure that you are up-to-date; a little more if you need to update an element. Even 5 minutes a day for the average user don't ask too much, considering the possible, and costimplications of contracting a virus/trojan really bad or another infection of malware on your system.

  We are all busy and never seem to have enough time. But a couple Youtube videos per week or per day, or a game or folded, is all it takes!

• OfficeJet Pro 8620: Analysis of problems of printer to the computer using windows 10

  I just upgraded to Windows 10 and now I'm not able to scan from the printer to the computer. I can scan the other way IE. computer to scan but is not as convenient. I had no question before the upgrade. The error message I get is

  
  

  "The analysis could not be performed because of one or more of the following problems:

  -Connection to the computer is lost.

  -L' scanning on the computer application is currently in use.

  -Application OCR is not installed on the computer.

  See the computer for details screen'.

  First of all it is connected with a usb cable, so no logical reason why the connection is lost.

  Secondly it is not used because I am trying to use it

  Third, it has baffled me because there is no reason why the OCR application is now gone, he worked before windows 10.

  and finally there is no detail on the computer screen, why it tells me that I do not understand.

  Any help would be appreciated. Thank you.

  Hello again,

  Looks like the next option is to uninstall & reinstall the printer software. This will ensure that the scan to computer option is restored.

  Please find the link below to install the printing software.

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8620-e-all-in-one-printer-series/5367611/model/5367613#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Note: Esnure that the chosen operating system is win10.

  If you are facing difficulties with the installation or uninstall, please contact HP technical support to the 1-800-474-6836.

  Kind regards

  Ashish

  　

  **************

  I work for HP, here is my point of view only.

• Problem recording photo after the edition of windows live photo gallery

  Whenever I try to edit an image in windows live gallery and try to save it, I get the following message appears AN ERROR IS PREVENTING PHOTO GALLERY OF SAVING THIS PHOTO.

  Can you offer me a solution or let me know if microsoft has a fix for this problem

  Hi jetparjas,

  Thank you for using answers Forum.

  You use software to back up your information?
  Maybe a new external drive with a backup program?
  Using drive encryption?

  Looks like some program prevents the Gallery to save changes, this usually occurs with a backup software that monitors changes in the files. Sometimes the software that allows us to make changes think the file is open somewhere else and it will not save.

  You can try to perform a clean boot to see if a startup program is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. under the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK, and then click restart.

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OKand then click restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK, and then click restart.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click restart.

  Please let us know if that helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the photo in Windows Media Player.

  * Original title: Windows Media PLayer

  I have Windows Media Player version 12 installed but when you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the picture.  Please see image attached.

  Even if I see that I can change the version of the file in a different format, I have the same problem with videos on websites that I can not of course change the format before playing these.

  I managed to fix the problem for about 20 minutes by flattening my computer re - install the operating system and this resolved until all updates have been through, and then it disappeared again.  I tried many codecs packs and this still does not help.

  My system is running Windows 7 and Media Player version is 12.0.7601.18840, which tells me that Media Player is the most recent version.

  Please can someone help?

  

  Open uninstall a program in windows and in the left click on the feature to turn on or off windows. Clear the check box of the window Media Player, and then click ok. This will uninstall the drive, and then restart.

  After restarting the same steps, now, check the box for the same and perform a restart and if all goes well it should solve the problem.

  Note: Make sure that Windows is up-to-date.

• Pavilion Dv6 - startup with beep continuous and wouldn't start without the CD inside windows

  Hi, so I was using my laptop one day, perfectly fine and I got sick, so I had it turned off for about 2 or 3 days. When I turned it back on it started constantly beep (1 beep long, but 1 beep followed by another instantly.

  Now I tried to reinstall Windows 7 and did, but she continued with the same problem. So I did a format on my drive, and did install a clean windows 7, it completed the installation currently and reset to move to the next step (now it does not start back to the desktop to completely finish doesn't stop beeping and freezing)

  I did a hard reboot and that did not work and I cleaned my air, nothing has worked to resolve this issue, and I did nothing in 2 or 3 days, he was off (before that day, I played last, it was working fine, and the day I turned it off everything I've done has been playing World of Warcraft don't not download/install something again)

  I opened the back and checked my memory was sitting on the right, and my HARD drive was inplace correctly (at the beginning when it was happening, it would not be in the office without the Windows 7 CD inside, now after I did a clean install, he's not going to the office without worrying)

  I read another post with similar problems and plan to go out 1 of my RAM sticks and just try to run with 1 in, and switching them and try to see if that helps, but I'll do that tomorrow as I worked on this thing for hours tonight, I've been on the Windows 7 forum get advice from someone here, but he gave a link to read and agreed I should post here also.

  My suspisions that if none of this works, it's my Proccessor, my Ram or my entire CPU, which in this case, I know not what to do to do or if it is worth fixing (Ram is easy, but the other two seems difficult and costly) for any help or advice as I can get from you guys would be greatly appreciated it's a HP Pavilion dv6 notebook.

  Edit: I managed to enter the office and my clean install of windows 7 in full, and I made a default reset in the BIOS, will return tomorrow with updates I have.

  Yes mate, I waiting since I posted a reply with HP staff.

  They are * beep * ing pathetic and I would never buy a HP anything ever, I will also say to all my friends and tell all my friends to tell their friends and so on and so forth, do not to do. I will also let any forum I post on the same and any game online that I play on the same thing.

  I gave up and will just buy a new DESKTOP PC, they work better and you can actually solve the material problems if it's graphics/CPU things, unlike a laptop.

  If I were to ever get a laptop once again, it will not be a HP, I'd rather have nothing then use a pathetic HP product ever, I would rather die then have to use it. Their technical support is pathetic, and I had nothing else problems with the HP laptop I've had since the beginning.

  Because of their pathetic excuse for a computer/laptop, I am behind in my studies and have perhaps missed a few projects that I'm not able to repeat. Thank you HP, you are now under the dirt for me.

• Problems with sound on the computer of Windows 8.

  my sound completely drops whenever I use my Dell inspiron 15R. IM tired of having to restart my pc every 20 minutes for the sound. IV tried all the stuff I can to fix the problem, but I get the same messages driver works properly and is up to date. the camera is used by another application but I haven't opened that it would use. Just WordPad which doesent use any sound I get no sound at all no sound sound of windows net or my hard drive. need this problem as soon as POSSIBLE

  The tab of the Windows driver will often say that the driver is updated, when in fact, the manufacturer has a newer version that Windows can detect.

  Instead of using the driver tab, I go to the website of Dell directly and manually download the new driver for Dell.

• Problem of access of the bios under windows 8

  Hello

  Since the update my pc windows 7 to 8, I have had problems with the BIOS I can access is no longer the bios by pressing f2 on my keyboard, I've been on people to sort for weeks to try to get this problem but I have anywhere below are a list of things I've tried
  1. communicate with my Packard bell manufacturing gave no progress if the question has been reassigned to tell me it was a software problem with windows
  2. I contacted a local technician who did not know what the problem was
  3. I contacted Microsoft answering service who told me that I should try to access BIOS through advanced, startup was missing why it worked several important things like
  The UEFI firmware settings and use a device (firmware settings is very important because it allows the pc to boot directly from the bios)
  4. I contacted Proton an independent company with experienced technicians, who suggested the same thing as Microsoft
  Thanks for any help in advance.
  James
   

  As you do not access the BIOS from Windows at all, not sure how this is a Microsoft issue.  The BIOS is what starts after the POST or Power On Self Test.  Then the BIOS takes over and from there it resets the Windows MBR to start.

  Therefore, hit F2 before you see anything to do with Windows, while F2 is the key used to access the BIOS Setup.  As soon as you see something to do with Windows, it is far along the boot process and you must try again.

• Problem opening URLS in the click box

  Hello
  
  I cannot start a file from a click box. I enter the url and deselect contine, running project. I have test the link in the preview and it works fine. However when I publish the file of the click box does not work. I click it several times and finally all that happens is the next slide appears. Something that should not happen at all.
  
  I tried using the buttons instead, again it works in preview, but not when I publish the course. I also tried selecting and deselecting her continue running Project box.
  
  Someone at - it had a similar problem? Know of a solution?

  Hi ntompkins

  Often we see problems when you try to run the project to your local computer. Could be Flash security settings. If this is the case, see if the tutorial below the help link.

  Click here to see the tutorial

  Note that this affects only playback on the local PC. If you have decided to copy the files on a web server and your users will run from there, you have nothing to worry about. If your intention is for each user to copy the files to the C: drive and run from there, then you concerns. But there are solutions if this is the case.

  See you soon... Rick

• Bootmgr missing and I have tried using the recovery installation window and it fails. no operating system are loaded.

  Double post merged and deleted.  Post moved from XP to Vista forum forum>

  Laptop HP discharged linux os, linux is the only operating system on laptop... Loading Vista missing bootmgr, the recovery option window has not repaired the file. I have no operating system in SYSTEM RECOVERY WINDOW. I chose load drivers and I am looking at the OPEN window and the SOURCE and do not know what to do next or what file to select sources. I would appreciate your help. Thank you

  Hello

  Here's how to reinstall Vista as you no longer have a recovery partition.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do it for a small fee

  HP:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=bph07143#N76

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Error: Windows cannot find "C:\Program Files\Common Files\LogiShrd\CDDRV3\LDConfig.exe." Make sure that you type the name correctly, and then try again at the start of Windows 7.

  Original title: Windows cannot find "C:\Program Files\Common Files\LogiShrd\CDDRV3\LDConfig.exe." Make sure that you type the name correctly, and then try again.

  This error keeps showing up in when I connect to my pc. How am I able to fix this? It's really annoying. Please help me.

  Its a file/utility Logitech and nothing to do with the victory

• Buttons and version 5.5 using the Click Box

  Using Captivate 5.5, in the same blade I try to use a box click to access a URL, but also to pause the slide with a button continue. When the click is selected, the URL is displayed, but the Captivate project moves to the next slide. My goal is to have the project on hold and require the participant to click continue to go to the next slide.

  With the above said, if I deselect the option to continue playing the project on the click box, continue it button does not appear.

  Can anyone help?

  Hello again

  With my suggestion, the script might look like this:

  Click on the image to enlarge

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How can I unlock files and how they lock in the first place?

  CS5 using for years.  Updated a few pages of my Web site and all of a sudden he says files were locked. I couldn't save anything. Also when I wound up program and reopened, the locked files were com, completely gone. Never had this happen.

  Hi Mousendie,

  Are what operating system you? You did recently changes to your operating system?

  Found a discussion that could help you in the meantime Re: problem recording of Dreamweaver - access denied

  Thank you

  Preran

• Problem of size and form of policy on the executable in Windows 7

  Hello

  my colleague has a problem with his application on a Windows 7 computer. It's an executable built with LabVIEW 2011 on a XP machine.

  Please see the attached screenshots for the appearance of the same exe under Windows XP and Windows 7 (where the fonts are more grand/resized).

  Do you have ideas about how to avoid this? One solution could be the use of screenshots of screen/bitmaps instead of text, but it is very uneasy about future changes.

  Best regards

  Manu

  Hi, manual,.

  This has been asked several times before:

  You must include some keys over in the INI of the executable file. I usually use those:

  FPFont = "Tahoma" 13
  BDFont = "Tahoma" 13
  appFont = "Tahoma" 13
  dialogFont = "Tahoma" 13
  systemFont = "Tahoma" 13

  Best regards!